aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-03-06IB/mlx5: When not in dual port RoCE mode, use provided port as nativeMark Bloch1-3/+7
The series that introduced dual port RoCE mode assumed that we don't have a dual port HCA that use the mlx5 driver, this is not the case for Connect-IB HCAs. This reasoning led to assigning 1 as the native port index which causes issue when the second port is used. For example query_pkey() when called on the second port will return values of the first port. Make sure that we assign the right port index as the native port index. Fixes: 32f69e4be269 ("{net, IB}/mlx5: Manage port association for multiport RoCE") Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06IB/mlx4: Include GID type when deleting GIDs from HW table under RoCEJack M1-2/+7
The commit cited below added a gid_type field (RoCEv1 or RoCEv2) to GID properties. When adding GIDs, this gid_type field was copied over to the hardware gid table. However, when deleting GIDs, the gid_type field was not copied over to the hardware gid table. As a result, when running RoCEv2, all RoCEv2 gids in the hardware gid table were set to type RoCEv1 when any gid was deleted. This problem would persist until the next gid was added (which would again restore the gid_type field for all the gids in the hardware gid table). Fix this by copying over the gid_type field to the hardware gid table when deleting gids, so that the gid_type of all remaining gids is preserved when a gid is deleted. Fixes: b699a859d17b ("IB/mlx4: Add gid_type to GID properties") Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06IB/mlx4: Fix corruption of RoCEv2 IPv4 GIDsJack Morgenstein1-2/+0
When using IPv4 addresses in RoCEv2, the GID format for the mapped IPv4 address should be: ::ffff:<4-byte IPv4 address>. In the cited commit, IPv4 mapped IPV6 addresses had the 3 upper dwords zeroed out by memset, which resulted in deleting the ffff field. However, since procedure ipv6_addr_v4mapped() already verifies that the gid has format ::ffff:<ipv4 address>, no change is needed for the gid, and the memset can simply be removed. Fixes: 7e57b85c444c ("IB/mlx4: Add support for setting RoCEv2 gids in hardware") Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06RDMA/qedr: Fix iWARP write and send with immediateKalderon, Michal1-0/+10
iWARP does not support RDMA WRITE or SEND with immediate data. Driver should check this before submitting to FW and return an immediate error Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06RDMA/qedr: Fix kernel panic when running fio over NFSoRDMAKalderon, Michal1-1/+2
Race in qedr_poll_cq, lastest_cqe wasn't protected by lock, leading to a case where two context's accessing poll_cq at the same time lead to one of them having a pointer to an old latest_cqe and reading an invalid cqe element Signed-off-by: Amit Radzi <Amit.Radzi@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06RDMA/qedr: Fix iWARP connect with port mapperKalderon, Michal1-6/+10
Fix iWARP connect and listen to use the mapped port for ipv4 and ipv6. Without this fixed, running on a server that has iwpmd enabled will not use the correct port Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06RDMA/qedr: Fix ipv6 destination address resolutionKalderon, Michal1-2/+1
The wrong parameter was passed to dst_neigh_lookup Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28RDMA/bnxt_re: Fix the ib_reg failure cleanupSelvin Xavier1-1/+4
Release the netdev references in the cleanup path. Invokes the cleanup routines if bnxt_re_ib_reg fails. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28RDMA/bnxt_re: Fix incorrect DB offset calculationDevesh Sharma4-3/+32
To support host systems with non 4K page size, l2_db_size shall be calculated with 4096 instead of PAGE_SIZE. Also, supply the host page size to FW during initialization. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28RDMA/bnxt_re: Unconditionly fence non wire memory operationsDevesh Sharma1-4/+11
HW requires an unconditonal fence for all non-wire memory operations through SQ. This guarantees the completions of these memory operations. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28IB/mlx: Set slid to zero in Ethernet completion structMoni Shoua2-2/+5
IB spec says that a lid should be ignored when link layer is Ethernet, for example when building or parsing a CM request message (CA17-34). However, since ib_lid_be16() and ib_lid_cpu16() validates the slid, not only when link layer is IB, we set the slid to zero to prevent false warnings in the kernel log. Fixes: 62ede7779904 ("Add OPA extended LID support") Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28{net, IB}/mlx5: Raise fatal IB event when sys error occursDaniel Jurgens1-9/+2
All other mlx5_events report the port number as 1 based, which is how FW reports it in the port event EQE. Reporting 0 for this event causes mlx5_ib to not raise a fatal event notification to registered clients due to a seemingly invalid port. All switch cases in mlx5_ib_event that go through the port check are supposed to set the port now, so just do it once at variable declaration. Fixes: 89d44f0a6c73("net/mlx5_core: Add pci error handlers to mlx5_core driver") Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28IB/mlx5: Avoid passing an invalid QP type to firmwareNoa Osherovich1-1/+6
During QP creation, the mlx5 driver translates the QP type to an internal value which is passed on to FW. There was no check to make sure that the translated value is valid, and -EINVAL was coerced into the mailbox command. Current firmware refuses this as an invalid QP type, but future/past firmware may do something else. Fixes: 09a7d9eca1a6c ('{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc') Reviewed-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28IB/mlx5: Fix incorrect size of klms in the memory regionSergey Gorenko1-1/+1
The value of mr->ndescs greater than mr->max_descs is set in the function mlx5_ib_sg_to_klms() if sg_nents is greater than mr->max_descs. This is an invalid value and it causes the following error when registering mr: mlx5_0:dump_cqe:276:(pid 193): dump error cqe 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 0f 00 78 06 25 00 00 8b 08 1e 8f d3 Cc: <stable@vger.kernel.org> # 4.5 Fixes: b005d3164713 ("mlx5: Add arbitrary sg list support") Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-20RDMA/bnxt_re: Avoid system hang during device un-regSelvin Xavier2-5/+4
BNXT_RE_FLAG_TASK_IN_PROG doesn't handle multiple work requests posted together. Track schedule of multiple workqueue items by maintaining a per device counter and proceed with IB dereg only if this counter is zero. flush_workqueue is no longer required from NETDEV_UNREGISTER path. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-20RDMA/bnxt_re: Fix system crash during load/unloadSelvin Xavier1-0/+5
During driver unload, the driver proceeds with cleanup without waiting for the scheduled events. So the device pointers get freed up and driver crashes when the events are scheduled later. Flush the bnxt_re_task work queue before starting device removal. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-20RDMA/bnxt_re: Synchronize destroy_qp with poll_cqSelvin Xavier4-19/+47
Avoid system crash when destroy_qp is invoked while the driver is processing the poll_cq. Synchronize these functions using the cq_lock. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-20RDMA/bnxt_re: Unpin SQ and RQ memory if QP create failsDevesh Sharma1-1/+8
Driver leaves the QP memory pinned if QP create command fails from the FW. Avoids this scenario by adding a proper exit path if the FW command fails. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-20RDMA/bnxt_re: Disable atomic capability on bnxt_re adaptersDevesh Sharma2-17/+3
More testing needs to be done before enabling this feature. Disabling the feature temporarily Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-15RDMA/vmw_pvrdma: Fix usage of user response structures in ABI fileAdit Ranadive3-3/+9
This ensures that we return the right structures back to userspace. Otherwise, it looks like the reserved fields in the response structures in userspace might have uninitialized data in them. Fixes: 8b10ba783c9d ("RDMA/vmw_pvrdma: Add shared receive queue support") Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver") Suggested-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Bryan Tan <bryantan@vmware.com> Reviewed-by: Aditya Sarwade <asarwade@vmware.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds2-8/+8
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds40-584/+853
Pull more rdma updates from Doug Ledford: "Items of note: - two patches fix a regression in the 4.15 kernel. The 4.14 kernel worked fine with NVMe over Fabrics and mlx5 adapters. That broke in 4.15. The fix is here. - one of the patches (the endian notation patch from Lijun) looks like a lot of lines of change, but it's mostly mechanical in nature. It amounts to the biggest chunk of change in it (it's about 2/3rds of the overall pull request). Summary: - Clean up some function signatures in rxe for clarity - Tidy the RDMA netlink header to remove unimplemented constants - bnxt_re driver fixes, one is a regression this window. - Minor hns driver fixes - Various fixes from Dan Carpenter and his tool - Fix IRQ cleanup race in HFI1 - HF1 performance optimizations and a fix to report counters in the right units - Fix for an IPoIB startup sequence race with the external manager - Oops fix for the new kabi path - Endian cleanups for hns - Fix for mlx5 related to the new automatic affinity support" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (38 commits) net/mlx5: increase async EQ to avoid EQ overrun mlx5: fix mlx5_get_vector_affinity to start from completion vector 0 RDMA/hns: Fix the endian problem for hns IB/uverbs: Use the standard kConfig format for experimental IB: Update references to libibverbs IB/hfi1: Add 16B rcvhdr trace support IB/hfi1: Convert kzalloc_node and kcalloc to use kcalloc_node IB/core: Avoid a potential OOPs for an unused optional parameter IB/core: Map iWarp AH type to undefined in rdma_ah_find_type IB/ipoib: Fix for potential no-carrier state IB/hfi1: Show fault stats in both TX and RX directions IB/hfi1: Remove blind constants from 16B update IB/hfi1: Convert PortXmitWait/PortVLXmitWait counters to flit times IB/hfi1: Do not override given pcie_pset value IB/hfi1: Optimize process_receive_ib() IB/hfi1: Remove unnecessary fecn and becn fields IB/hfi1: Look up ibport using a pointer in receive path IB/hfi1: Optimize packet type comparison using 9B and bypass code paths IB/hfi1: Compute BTH only for RDMA_WRITE_LAST/SEND_LAST packet IB/hfi1: Remove dependence on qp->s_hdrwords ...
2018-02-06Merge tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-51/+8
Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
2018-02-05RDMA/hns: Fix the endian problem for hnsoulijun8-320/+363
The hip06 and hip08 run on a little endian ARM, it needs to revise the annotations to indicate that the HW uses little endian data in the various DMA buffers, and flow the necessary swaps throughout. The imm_data use big endian mode. The cpu_to_le32/le32_to_cpu swaps are no-op for this, which makes the only substantive change the handling of imm_data which is now mandatory swapped. This also keep match with the userspace hns driver and resolve the warning by sparse. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-01IB/hfi1: Add 16B rcvhdr trace supportDon Hiatt2-4/+6
Add trace_hfi1_rcvhdr support for bypass packets. While here, remove the etype argument as it is available in struct hfi1_packet. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Convert kzalloc_node and kcalloc to use kcalloc_nodeKamenee Arumugam3-16/+19
Kzalloc_node API doesn't check for overflows in size multiplication. While kcalloc API check for overflows in size multiplication but these implementations are not NUMA-aware. This conversion allowed for correcting an allocation used in the hot path to be on the local NUMA and ensure us overflow free multiplication for the size of a memory allocation. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Show fault stats in both TX and RX directionsMitko Haralanov1-1/+8
The routine which shows the fault stats checks the counters to determine whether to show any stats based on the number of transmitted pkts/bytes for a particular opcode. Unfortunately, it only checked the receive counters. As a result, if any packet faults have happened for packets egressing the HFI, those stats would not be shown. In order to fix this, the routine is amended to also check the TX counters. With this change the pkt/byte counts are the sum of both TX and RX counts for the opcode. Fixes: 1b311f8931cf ("IB/hfi1: Add tx_opcode_stats like the opcode_stats") Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Remove blind constants from 16B updateMike Marciniszyn4-14/+25
These values were introduced as part of the 16B code to account for the varying size of the LRH between the differing packet formats. Replace the blind constants with defines based on FIELD_SIZEOF() calls. Fixes: 5b6cabb0db77 ("IB/hfi1: Add 16B RC/UC support") Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Convert PortXmitWait/PortVLXmitWait counters to flit timesKamenee Arumugam6-19/+239
HFI's counters SendWaitCnt and SendWaitVlCnt are in units of TXE cycle time (at 805MHz). OPA counters PortXmitWait and PortVLXmtWait are in units of flit times. Convert the counter values to flit units using following conversion formula: PortXmitWait = SendWaitCnt * 2 * (4 /link_width) * (25 Gbps /link_speed) PortVLXmitWait = SendWaitVLCnt * 2 * (4 /link_width) * (25 Gbps /link_speed) At link up or downgrade events, the link width can change. To ensure accurate counter calculations, sample the counters after the events, during counter requests, and then aggregate the OPA counters. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Do not override given pcie_pset valueBartlomiej Dudek1-11/+12
During PCIe Gen 3 transistion, pcie_pset is read and might be overridden to a default value(i.e. 255) in do_pcie_gen3_transition() routine. If the pcie_pset value is overridden then this new value will be used during initialization of next adapter on a different card. Introducing a new local variable to avoid modification of pcie_pset Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Bartlomiej Dudek <bartlomiej.dudek@intel.com> Signed-off-by: Patel Jay P <jay.p.patel@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Optimize process_receive_ib()Sebastian Sanchez2-32/+17
The arguments for trace_hfi1_rcvhdr() get computed every time in the hot path regardless of the whether the trace is on or off. This is seen to be costly with a profile. The handling of fault inject isolates the verbs device for all packets regardless of the presence of a RHF_DC_ERR error. Fix the first by computing trace_hfi1_rcvhdr() arguments within the trace itself, so that when the trace is off, the argument data isn't computed. Fix the second by moving the error check to handle_eflags() when an RHF error occurs and by testing for RHF_DC_ERR before executing the reset of handle_eflags(). Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Remove unnecessary fecn and becn fieldsSebastian Sanchez6-30/+20
packet->fecn and packet->becn are calculated in the hot path and are never used. Remove these fields as they show to be costly in a profile. Also, remove initialization for becn and fecn in process_ecn() as they're unconditionally assigned in the function and ensure fecn and becn variables use a boolean type. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Look up ibport using a pointer in receive pathSebastian Sanchez3-23/+30
In the receive path, hfi1_ibport is looked up by indexing into an array. A profile shows this to be expensive. The receive context data has a pointer to the ibport data, use that pointer instead. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Optimize packet type comparison using 9B and bypass code pathsSebastian Sanchez4-13/+13
The packet type comparison used to find out if a packet is a bypass packet in the hot path is an expensive operation as seen in a profile. Determine packet's pkey and migration bit through the bypass and 9B code paths instead. Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Compute BTH only for RDMA_WRITE_LAST/SEND_LAST packetSebastian Sanchez6-12/+6
In hfi1_rc_rcv(), BTH is computed for all packets received. However, it's only used for packets received with opcodes RDMA_WRITE_LAST and SEND_LAST, and it is a costly operation. Compute BTH only in the RDMA_WRITE_LAST/SEND_LAST code path and let the compiler handle endianness conversion for bitwise operations. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Remove dependence on qp->s_hdrwordsMitko Haralanov10-59/+61
The s_hdrwords variable was used to indicate whether a packet was already built on a previous iteration of the send engine. This variable assumed the protection of the QP's RVT_S_BUSY flag, which was required since the the QP's s_lock was dropped just prior to the packet being queued on the one of the egress mechanisms. Support for multiple send engine instantiations require that the field not be used due to concurency issues. The ps.txreq signals the "already built" without the potential concurency issues. Fix by getting rid of all s_hdrword usage. A wrapper is added to test for the already built case that used to use s_hdrwords. What used to be stored in s_hdrwords is now in the txreq. The PBC is not counted, but is added in the pio/sdma code paths prior to posting the packet. Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Fix for potential refcount leak in hfi1_open_file()Alex Estrin1-3/+1
The dd refcount is speculatively incremented prior to allocating the fd memory with kzalloc(). If that kzalloc() failed the dd refcount leaks. Increment refcount on kzalloc success. Fixes: e11ffbd57520 ("IB/hfi1: Do not free hfi1 cdev parent structure early") Reviewed-by: Michael J Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Fix for early release of sdma contextAlex Estrin3-6/+9
With IRQF_SHARED flag set and CONFIG_DEBUG_SHIRQ enabled module removal may result in panic in sdma_interrupt() routine if associated sdma context was released before pci_free_irq(); [ 9198.939885] BUG: unable to handle kernel NULL pointer dereference at (null) [ 9198.940514] IP: sdma_make_progress+0xa5/0x450 [hfi1] [ 9198.941114] PGD 170bdc0067 P4D 170bdc0067 PUD 172063e067 PMD 0 [ 9198.941783] Oops: 0000 [#1] SMP ..... [ 9198.958877] CPU: 132 PID: 64173 Comm: rmmod Tainted: G OE 4.14.0-rc4+ #1 [ 9198.961032] Hardware name: Intel Corporation S7200AP/S7200AP, BIOS S72C610.86B.01.02.0118.080620171935 08/06/2017 [ 9198.963323] task: ffff9681397f0000 task.stack: ffffae1647c40000 [ 9198.965695] RIP: 0010:sdma_make_progress+0xa5/0x450 [hfi1] [ 9198.968082] RSP: 0018:ffffae1647c43be8 EFLAGS: 00010046 [ 9198.970503] RAX: 0000000000000000 RBX: ffff9680ce8b5ca8 RCX: 0000000000000000 [ 9198.973006] RDX: 0000000000000000 RSI: 0000000001a00d28 RDI: ffff9680ce8b5ca0 [ 9198.975546] RBP: ffffae1647c43c40 R08: ffff96814325ec00 R09: 00000000ffffffff [ 9198.978142] R10: 000000004325e501 R11: ffff96814325ec00 R12: ffff9680ce8b5c44 [ 9198.980779] R13: ffff9680ce8b5ca0 R14: 0000000000000000 R15: ffff9680ce8b5b00 [ 9198.983462] FS: 00007f31196ba740(0000) GS:ffff96819df00000(0000) knlGS:0000000000000000 [ 9198.986231] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9198.989036] CR2: 0000000000000000 CR3: 000000170833f000 CR4: 00000000001406e0 [ 9198.991911] Call Trace: [ 9198.994847] sdma_engine_interrupt+0x82/0x100 [hfi1] [ 9198.997852] sdma_interrupt+0x61/0xc0 [hfi1] [ 9199.000852] __free_irq+0x1b3/0x2d0 [ 9199.003873] free_irq+0x35/0x70 [ 9199.006909] pci_free_irq+0x1c/0x30 [ 9199.009999] clean_up_interrupts+0x53/0xf0 [hfi1] [ 9199.013137] hfi1_start_cleanup+0x117/0x190 [hfi1] [ 9199.016315] postinit_cleanup+0x1d/0x270 [hfi1] [ 9199.019529] remove_one+0x1f3/0x210 [hfi1] [ 9199.022738] pci_device_remove+0x39/0xc0 [ 9199.025974] device_release_driver_internal+0x141/0x210 [ 9199.029268] driver_detach+0x3f/0x80 [ 9199.032580] bus_remove_driver+0x55/0xd0 [ 9199.035931] driver_unregister+0x2c/0x50 [ 9199.039321] pci_unregister_driver+0x2a/0xa0 [ 9199.042755] hfi1_mod_cleanup+0x10/0xb50 [hfi1] [ 9199.046196] SyS_delete_module+0x171/0x250 ... Fix by exporting sdma_clean() and removing from sdma_exit(). sdma_exit() now just manipulates the engine state, leaving the memory free to sdma_clean() which is now called just before the dd is freed. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01IB/hfi1: Re-order IRQ cleanup to address driver cleanup raceMichael J. Ruhl3-7/+16
The pci_request_irq() interfaces always adds the IRQF_SHARED bit to all IRQ requests. When the kernel is built with CONFIG_DEBUG_SHIRQ config flag, if the IRQF_SHARED bit is set, a call to the IRQ handler is made from the __free_irq() function. This is testing a race condition between the IRQ cleanup and an IRQ racing the cleanup. The HFI driver should be able to handle this race, but does not. This race can cause traces that start with this footprint: BUG: unable to handle kernel NULL pointer dereference at (null) Call Trace: <hfi1 irq handler> ... __free_irq+0x1b3/0x2d0 free_irq+0x35/0x70 pci_free_irq+0x1c/0x30 clean_up_interrupts+0x53/0xf0 [hfi1] hfi1_start_cleanup+0x122/0x190 [hfi1] postinit_cleanup+0x1d/0x280 [hfi1] remove_one+0x233/0x250 [hfi1] pci_device_remove+0x39/0xc0 Export IRQ cleanup function so it can be called from other modules. Using the exported cleanup function: Re-order the driver cleanup code to clean up IRQ resources before other resources, eliminating the race. Re-order error path for init so that the race does not occur. Reduce severity on spurious error message for SDMA IRQs to info. Reviewed-by: Alex Estrin <alex.estrin@intel.com> Reviewed-by: Patel Jay P <jay.p.patel@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01RDMA/hns: Fix misplaced call to hns_roce_cleanup_hem_tableoulijun1-1/+0
The mtt_table is cleaned up during the err_unmap_cqe label, it is a mistake to duplicate the cleanup during the later unwind labels. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01RDMA/hns: Add names to function arguments in function pointersoulijun1-4/+4
This patch mainly fix some style warings matched with the new checkpatch requirement. The warning as follows: WARNING: function definition argument 'struct hns_roce_cq *' should also have an identifier name Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01RDMA/hns: Remove unnecessary operatoroulijun1-2/+2
The double not-operator is unncessary when used in a boolean context. This patch removes them. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01RDMA/bnxt_re: Use common error handling code in bnxt_qplib_alloc_dpi_tbl()Markus Elfring1-6/+7
Add a jump target so that a bit of exception handling can be better reused at the end of this function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Devesh Sharma <devesh.sharma@broadcom.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-01RDMA/bnxt_re: Delete two error messages for a failed memory allocation in bnxt_qplib_alloc_dpi_tbl()Markus Elfring1-5/+0
Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Devesh Sharma <devesh.sharma@broadcom.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-31Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+1
Merge updates from Andrew Morton: - misc fixes - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) mm: remove PG_highmem description tools, vm: new option to specify kpageflags file mm/swap.c: make functions and their kernel-doc agree mm, memory_hotplug: fix memmap initialization mm: correct comments regarding do_fault_around() mm: numa: do not trap faults on shared data section pages. hugetlb, mbind: fall back to default policy if vma is NULL hugetlb, mempolicy: fix the mbind hugetlb migration mm, hugetlb: further simplify hugetlb allocation API mm, hugetlb: get rid of surplus page accounting tricks mm, hugetlb: do not rely on overcommit limit during migration mm, hugetlb: integrate giga hugetlb more naturally to the allocation path mm, hugetlb: unify core page allocation accounting and initialization mm/memcontrol.c: try harder to decrease [memory,memsw].limit_in_bytes mm/memcontrol.c: make local symbol static mm/hmm: fix uninitialized use of 'entry' in hmm_vma_walk_pmd() include/linux/mmzone.h: fix explanation of lower bits in the SPARSEMEM mem_map pointer mm/compaction.c: fix comment for try_to_compact_pages() mm/page_ext.c: make page_ext_init a noop when CONFIG_PAGE_EXTENSION but nothing uses it zsmalloc: use U suffix for negative literals being shifted ...
2018-01-31mm, mmu_notifier: annotate mmu notifiers with blockable invalidate callbacksDavid Rientjes1-0/+1
Commit 4d4bbd8526a8 ("mm, oom_reaper: skip mm structs with mmu notifiers") prevented the oom reaper from unmapping private anonymous memory with the oom reaper when the oom victim mm had mmu notifiers registered. The rationale is that doing mmu_notifier_invalidate_range_{start,end}() around the unmap_page_range(), which is needed, can block and the oom killer will stall forever waiting for the victim to exit, which may not be possible without reaping. That concern is real, but only true for mmu notifiers that have blockable invalidate_range_{start,end}() callbacks. This patch adds a "flags" field to mmu notifier ops that can set a bit to indicate that these callbacks do not block. The implementation is steered toward an expensive slowpath, such as after the oom reaper has grabbed mm->mmap_sem of a still alive oom victim. [rientjes@google.com: mmu_notifier_invalidate_range_end() can also call the invalidate_range() must not block, fix comment] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1801091339570.240101@chino.kir.corp.google.com [akpm@linux-foundation.org: make mm_has_blockable_invalidate_notifiers() return bool, use rwsem_is_locked()] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1712141329500.74052@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Dimitri Sivanich <sivanich@hpe.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Joerg Roedel <joro@8bytes.org> Cc: Doug Ledford <dledford@redhat.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-55/+72
Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...
2018-01-31RDMA/bnxt_re: Fix an error code in bnxt_qplib_create_srq()Dan Carpenter1-1/+3
We should return -ENOMEM if the allocation fails. (The current code returns succees). Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-By: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-31RDMA/bnxt_re: Fix static checker warningDoug Ledford1-5/+2
If there is ever any error while creating srq->umem, we return that error, we don't store it in srq->umem, so any check of srq->umem for IS_ERR is pointless. Further, checking udata is unnecessary as srq->umem is always either NULL or valid, without respect to udata. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds92-2492/+6530
Pull RDMA subsystem updates from Jason Gunthorpe: "Overall this cycle did not have any major excitement, and did not require any shared branch with netdev. Lots of driver updates, particularly of the scale-up and performance variety. The largest body of core work was Parav's patches fixing and restructing some of the core code to make way for future RDMA containerization. Summary: - misc small driver fixups to bnxt_re/hfi1/qib/hns/ocrdma/rdmavt/vmw_pvrdma/nes - several major feature adds to bnxt_re driver: SRIOV VF RoCE support, HugePages support, extended hardware stats support, and SRQ support - a notable number of fixes to the i40iw driver from debugging scale up testing - more work to enable the new hip08 chip in the hns driver - misc small ULP fixups to srp/srpt//ipoib - preparation for srp initiator and target to support the RDMA-CM protocol for connections - add RDMA-CM support to srp initiator, srp target is still a WIP - fixes for a couple of places where ipoib could spam the dmesg log - fix encode/decode of FDR/EDR data rates in the core - many patches from Parav with ongoing work to clean up inconsistencies and bugs in RoCE support around the rdma_cm - mlx5 driver support for the userspace features 'thread domain', 'wallclock timestamps' and 'DV Direct Connected transport'. Support for the firmware dual port rocee capability - core support for more than 32 rdma devices in the char dev allocation - kernel doc updates from Randy Dunlap - new netlink uAPI for inspecting RDMA objects similar in spirit to 'ss' - one minor change to the kobject code acked by Greg KH" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (259 commits) RDMA/nldev: Provide detailed QP information RDMA/nldev: Provide global resource utilization RDMA/core: Add resource tracking for create and destroy PDs RDMA/core: Add resource tracking for create and destroy CQs RDMA/core: Add resource tracking for create and destroy QPs RDMA/restrack: Add general infrastructure to track RDMA resources RDMA/core: Save kernel caller name when creating PD and CQ objects RDMA/core: Use the MODNAME instead of the function name for pd callers RDMA: Move enum ib_cq_creation_flags to uapi headers IB/rxe: Change RDMA_RXE kconfig to use select IB/qib: remove qib_keys.c IB/mthca: remove mthca_user.h RDMA/cm: Fix access to uninitialized variable RDMA/cma: Use existing netif_is_bond_master function IB/core: Avoid SGID attributes query while converting GID from OPA to IB RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure IB/umad: Fix use of unprotected device pointer IB/iser: Combine substrings for three messages IB/iser: Delete an unnecessary variable initialisation in iser_send_data_out() IB/iser: Delete an error message for a failed memory allocation in iser_send_data_out() ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.