aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-01-19IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headersMoni Shoua1-9/+51
RoCEv2 packets are sent over IP/UDP protocols. The mlx4 driver uses a type of RAW QP to send packets for QP1 and therefore needs to build the network headers below BTH in software. This patch adds option to build QP1 packets with IP and UDP headers if RoCEv2 is requested. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Enable RoCE v2 when the IB device is addedMoni Shoua1-1/+8
If the hardware supports RoCE v2, we configure the hardware UDP port according to the RoCE v2 Annex when mlx4_ib device is added. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Support modify_qp for RoCE v2Moni Shoua1-3/+34
In order to support modify_qp for RoCE v2, we need to set the gid_type in the QP context. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Add support for setting RoCEv2 gids in hardwareMoni Shoua1-3/+60
To tell hardware about a gid with type RoCEv2, software needs a new modifier to the SET_PORT command: MLX4_SET_PORT_ROCE_ADDR. This can replace the old method, MLX4_SET_PORT_GID_TABLE, for RoCEv1 gids. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Add gid_type to GID propertiesMoni Shoua2-4/+14
IB core driver adds a property of type to struct ib_gid_attr. The mlx4 driver should take that in consideration when modifying or querying the hardware gid table. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Use hop-limit from IP stack for RoCEMatan Barak1-1/+2
Previously, IPV6_DEFAULT_HOPLIMIT was used as the hop limit value for RoCE. Fixing that by taking ip4_dst_hoplimit and ip6_dst_hoplimit as hop limit values. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Rename rdma_addr_find_dmac_by_grhMatan Barak1-3/+3
rdma_addr_find_dmac_by_grh resolves dmac, vlan_id and if_index and downsteram patch will also add hop_limit as an output parameter, thus we rename it to rdma_addr_find_l2_eth_by_grh. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx5: Fix passing casted pointer in mlx5_query_port_roceLeon Romanovsky1-2/+3
Fix static checker warning: drivers/infiniband/hw/mlx5/main.c:149 mlx5_query_port_roce() warn: passing casted pointer '&props->qkey_viol_cntr' to 'mlx5_query_nic_vport_qkey_viol_cntr()' 32 vs 16. Fixes: 3f89a643eb29 ("IB/mlx5: Extend query_device/port to support RoCE") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19infiniband: Replace memset with eth_zero_addrLucas Tanure2-2/+2
Use eth_zero_addr to assign the zero address to the given address array instead of memset when second argument is address of zero. Signed-off-by: Lucas Tanure <tanure@linux.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx5: Delete locally redefined variableLeon Romanovsky1-4/+0
Fix the following sparse warning: drivers/infiniband/hw/mlx5/main.c:1061:29: warning: symbol 'pfn' shadows an earlier one drivers/infiniband/hw/mlx5/main.c:1030:21: originally declared here Fixes: d69e3bcf7976 ('IB/mlx5: Mmap the HCA's core clock register to user-space') Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Take source mac from AH instead from the portMoni Shoua1-22/+2
In commit dbf727de7440 ("IB/core: Use GID table in AH creation and dmac resolution") we copy source mac to mlx4_ah from the attributes of gid at ib_ah_attr.grh.sgid_index. Now we can use it. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Initialize hop_limit when creating address handleMatan Barak1-0/+1
Hop limit value wasn't copied from attributes when ah was created. This may influence packets for unconnected services to get dropped in routers when endpoints are not in the same subnet. Fixes: fa417f7b520e ("IB/mlx4: Add support for IBoE") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx5: Expose correct maximum number of CQE capacityLeon Romanovsky1-1/+1
Maximum number of EQE capacity per CQ was mistakenly exposed as CQE. Fix that. Fixes: 938fe83c8dcb ("net/mlx5_core: New device capabilities handling") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Cc: <stable@vger.kernel.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19iw_cxgb4: Take clip reference before starting IPv6 listenHariprasad S1-4/+10
The h/w is designed in such a way that, if you do anything IPv6 related, a valid clip entry must be there. So take clip reference before creating IPv6 listening servers, and then if we fail to create server, release the clip entry. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19iw_cxgb4: Fixes GW-Basic labels to meaningful error namesHariprasad S1-28/+17
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19iw_cxgb4: Fixes static checker warning in c4iw_rdev_open()Hariprasad S1-4/+4
Commit c5dfb000b904 ("iw_cxgb4: Pass qid range to user space driver") from Dec 11, 2015, leads to the following static checker warning: drivers/infiniband/hw/cxgb4/device.c:857 c4iw_rdev_open() warn: variable dereferenced before check 'rdev->status_page' Also we weren't deallocating ocqp pool in error path when failed to allocate status page. Fixing it too. Fixes: c5dfb000b904 ("iw_cxgb4: Pass qid range to user space driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19RDMA/nes: checking for NULL instead of IS_ERRDan Carpenter1-2/+2
nes_reg_phys_mr() returns ERR_PTRs on error. It doesn't return NULL. This bug has been there for a while, but we recently changed from calling a function pointer to calling nes_reg_phys_mr() directly so now Smatch is able to detect the bug. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/qib: Support creating qps with GFP_NOIO flagVinit Agnihotri1-14/+32
The current code is problematic when the QP creation and ipoib is used to support NFS and NFS desires to do IO for paging purposes. In that case, the GFP_KERNEL allocation in qib_qp.c causes a deadlock in tight memory situations. This fix adds support to create queue pair with GFP_NOIO flag for connected mode only to cleanly fail the create queue pair in those situations. Cc: <stable@vger.kernel.org> # 3.16+ Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19RDMA/ocrdma: Depend on async link events from CNADevesh Sharma6-22/+119
Recently Dough Ledford reported a deadlock happening between ocrdma-load sequence and NetworkManager service issuing "open" on be2net interface. The deadlock happens when any be2net hook (e.g. open/close) is called in parallel to insmod ocrdma.ko. A. be2net is sending administrative open/close event to ocrdma holding device_list_mutex. It does this from ndo_open/ndo_stop hooks of be2net. So sequence of locks is rtnl_lock---> device_list lock B. When new ocrdma roce device gets registered, infiniband stack now takes rtnl_lock in ib_register_device() in GID initialization routines. So sequence of locks in this path is device_list lock ---> rtnl_lock. This improper locking sequence causes deadlock. With this patch we stop using administrative open and close events injected by be2net driver. These events were used to dispatch PORT_ACTIVE and PORT_ERROR events to the IB-stack. This patch implements a logic to receive async-link-events generated from CNA whenever link-state-change is detected. Now on, these async-events will be used to dispatch PORT_ACTIVE and PORT_ERROR events to IB-stack. Depending on async-events from CNA removes the need to hold device-list-mutex and thus breaks the busy-wait scenario. Reported-by: Doug Ledford <dledford@redhat.com> CC: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19RDMA/ocrdma: Dispatch only port event when port state changesDevesh Sharma1-23/+0
Dispatch only port event to IB stack when port state changes. Don't explicitly modify qps to error. Let application listen to port events on async event queue or let QP fail with retry-exceeded completion error. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19RDMA/ocrdma: Fix vlan-id assignment in qp parametersDevesh Sharma1-3/+4
vlan-id is wrongly getting as 0 when PFC is enabled. Set vlan-id configured by user in QP parameters. In case vlan interface is not used, flash a warning to user to configure vlan and assign vlan-id as 0 in qp params. Fixes: dbf727de7440 ('IB/core: Use GID table in AH creation and dmac resolution') Cc: Matan Barak <matanb@mellanox.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/qib: fix mcast detach when qp not attachedMike Marciniszyn1-20/+15
The code produces the following trace: [1750924.419007] general protection fault: 0000 [#3] SMP [1750924.420364] Modules linked in: nfnetlink autofs4 rpcsec_gss_krb5 nfsv4 dcdbas rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl dm_multipath nfs lockd scsi_dh sunrpc fscache radeon ttm drm_kms_helper drm serio_raw parport_pc ppdev i2c_algo_bit lpc_ich ipmi_si ib_mthca ib_qib dca lp parport ib_ipoib mac_hid ib_cm i3000_edac ib_sa ib_uverbs edac_core ib_umad ib_mad ib_core ib_addr tg3 ptp dm_mirror dm_region_hash dm_log psmouse pps_core [1750924.420364] CPU: 1 PID: 8401 Comm: python Tainted: G D 3.13.0-39-generic #66-Ubuntu [1750924.420364] Hardware name: Dell Computer Corporation PowerEdge 860/0XM089, BIOS A04 07/24/2007 [1750924.420364] task: ffff8800366a9800 ti: ffff88007af1c000 task.ti: ffff88007af1c000 [1750924.420364] RIP: 0010:[<ffffffffa0131d51>] [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.420364] RSP: 0018:ffff88007af1dd70 EFLAGS: 00010246 [1750924.420364] RAX: 0000000000000001 RBX: ffff88007b822688 RCX: 000000000000000f [1750924.420364] RDX: ffff88007b822688 RSI: ffff8800366c15a0 RDI: 6764697200000000 [1750924.420364] RBP: ffff88007af1dd78 R08: 0000000000000001 R09: 0000000000000000 [1750924.420364] R10: 0000000000000011 R11: 0000000000000246 R12: ffff88007baa1d98 [1750924.420364] R13: ffff88003ecab000 R14: ffff88007b822660 R15: 0000000000000000 [1750924.420364] FS: 00007ffff7fd8740(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 [1750924.420364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1750924.420364] CR2: 00007ffff597c750 CR3: 000000006860b000 CR4: 00000000000007e0 [1750924.420364] Stack: [1750924.420364] ffff88007b822688 ffff88007af1ddf0 ffffffffa0132429 000000007af1de20 [1750924.420364] ffff88007baa1dc8 ffff88007baa0000 ffff88007af1de70 ffffffffa00cb313 [1750924.420364] 00007fffffffde88 0000000000000000 0000000000000008 ffff88003ecab000 [1750924.420364] Call Trace: [1750924.420364] [<ffffffffa0132429>] qib_multicast_detach+0x1e9/0x350 [ib_qib] [1750924.568035] [<ffffffffa00cb313>] ? ib_uverbs_modify_qp+0x323/0x3d0 [ib_uverbs] [1750924.568035] [<ffffffffa0092d61>] ib_detach_mcast+0x31/0x50 [ib_core] [1750924.568035] [<ffffffffa00cc213>] ib_uverbs_detach_mcast+0x93/0x170 [ib_uverbs] [1750924.568035] [<ffffffffa00c61f6>] ib_uverbs_write+0xc6/0x2c0 [ib_uverbs] [1750924.568035] [<ffffffff81312e68>] ? apparmor_file_permission+0x18/0x20 [1750924.568035] [<ffffffff812d4cd3>] ? security_file_permission+0x23/0xa0 [1750924.568035] [<ffffffff811bd214>] vfs_write+0xb4/0x1f0 [1750924.568035] [<ffffffff811bdc49>] SyS_write+0x49/0xa0 [1750924.568035] [<ffffffff8172f7ed>] system_call_fastpath+0x1a/0x1f [1750924.568035] Code: 66 2e 0f 1f 84 00 00 00 00 00 31 c0 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 10 <f0> ff 8f 40 01 00 00 74 0e 48 89 df e8 8e f8 06 e1 5b 5d c3 0f [1750924.568035] RIP [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50 [ib_qib] [1750924.568035] RSP <ffff88007af1dd70> [1750924.650439] ---[ end trace 73d5d4b3f8ad4851 ] The fix is to note the qib_mcast_qp that was found. If none is found, then return EINVAL indicating the error. Cc: <stable@vger.kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24RDMA/nes: constify nes_cm_ops structureJulia Lawall2-2/+2
The nes_cm_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24IB/mlx5: report tx/rx checksum cap in query resultsBodong Wang1-0/+4
This patch will report the tx/rx checksum cap for raw qp via the query device results. Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24IB/mlx4: Convert kmalloc to kmalloc_array for checkpatchLeon Romanovsky2-3/+3
Convert kmalloc to be kmalloc_array to fix warnings below: WARNING: Prefer kmalloc_array over kmalloc with multiply + qp->sq.wrid = kmalloc(qp->sq.wqe_cnt * sizeof(u64), WARNING: Prefer kmalloc_array over kmalloc with multiply + qp->rq.wrid = kmalloc(qp->rq.wqe_cnt * sizeof(u64), WARNING: Prefer kmalloc_array over kmalloc with multiply + srq->wrid = kmalloc(srq->msrq.max * sizeof(u64), Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24IB/mlx4: Suppress non-fatal memory allocationsLeon Romanovsky2-3/+6
Failure in kmalloc memory allocations will throw a warning about it. Such warnings are not needed anymore, since in commit 0ef2f05c7e02 ("IB/mlx4: Use vmalloc for WR buffers when needed"), fallback mechanism from kmalloc() to __vmalloc() was added. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24IB/mlx5: Advertise atomic capabilities in query deviceEran Ben Elisha1-1/+27
In order to ensure IB spec atomic correctness in atomic operations, if HW is configured to host endianness, advertise IB_ATOMIC_HCA. if not, advertise IB_ATOMIC_NONE. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24iw_cxgb3: Fix incorrectly returning error on successHariprasad S1-2/+2
The cxgb3_*_send() functions return NET_XMIT_ values, which are positive integers values. So don't treat positive return values as an error. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-24iw_cxgb4: Pass qid range to user space driverHariprasad S3-1/+12
Enhances the t4_dev_status_page to pass the qid start and size attributes from iw_cxgb4 to libcxgb4. Bump the ABI Version to 3 -> To allow libcxgb4 to detect old drivers and revert to the old way of computing the qid ranges. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Add driver cross-channel supportLeon Romanovsky4-11/+69
Add support of cross-channel functionality to mlx5 driver. This includes ability to ignore overrun for CQ which intended for cross-channel, export device capability and configure the QP to be sync master/slave queues. The cross-channel enabled QP supports combination of three possible properties: * WQE processing on the receive queue of this QP * WQE processing on the send queue of this QP * WQE are supported on the send queue Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Mmap the HCA's core clock register to user-spaceMatan Barak2-1/+31
In order to read the HCA's current cycles register, we need to map it to user-space. Add support to map this register via mmap command. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Add hca_core_clock_offset to udata in init_ucontextMatan Barak3-10/+42
Pass hca_core_clock_offset to user-space is mandatory in order to let the user-space read the free-running clock register from the right offset in the memory mapped page. Passing this value is done by changing the vendor's command and response of init_ucontext to be in extensible form. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Add support for hca_core_clock and timestamp_maskMatan Barak1-0/+2
Reporting the hca_core_clock (in kHZ) and the timestamp_mask in query_device extended verb. timestamp_mask is used by users in order to know what is the valid range of the raw timestamps, while hca_core_clock reports the clock frequency that is used for timestamps. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Add create_cq extended commandMatan Barak1-0/+7
In order to create a CQ that supports timestamp, mlx5 needs to support the extended create CQ command with the timestamp flag. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB: remove the write-only usecnt field from struct ib_mrChristoph Hellwig2-6/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23nes: simplify nes_reg_phys_mr calling conventionsChristoph Hellwig3-116/+37
Just pass and address/size pair instead of an ib_phys_buf array. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23cxgb3: simplify iwch_get_dma_wrChristoph Hellwig3-126/+26
Fold simplified versions of build_phys_page_list and iwch_register_phys_mem into iwch_get_dma_wr now that no other callers are left. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB: remove in-kernel support for memory windowsChristoph Hellwig16-237/+0
Remove the unused ib_allow_mw and ib_bind_mw functions, remove the unused IB_WR_BIND_MW and IB_WC_BIND_MW opcodes and move ib_dealloc_mw into the uverbs module. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB: remove support for phys MRsChristoph Hellwig16-677/+10
We have stopped using phys MRs in the kernel a while ago, so let's remove all the cruft used to implement them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-By: Devesh Sharma<devesh.sharma@avagotech.com> [ocrdma] Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Support RoCEAchiad Shochat1-4/+44
Advertise RoCE support for IB/core layer and set the hardware to work in RoCE mode. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Add RoCE fields to Address VectorAchiad Shochat4-19/+81
Set the address handle and QP address path fields according to the link layer type (IB/Eth). Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Support IB device's callbacks for adding/deleting GIDsAchiad Shochat1-0/+89
These callbacks write into the mlx5 RoCE address table. Upon del_gid we write a zero'd GID. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Set network_hdr_type upon RoCE responder completionAchiad Shochat1-0/+17
When handling a responder completion, if the link layer is Ethernet, set the work completion network_hdr_type field according to CQE's info and the IB_WC_WITH_NETWORK_HDR_TYPE flag. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Extend query_device/port to support RoCEAchiad Shochat1-6/+69
Using the vport access functions to retrieve the Ethernet specific information and return this information in ib_query_device and ib_query_port. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Support IB device's callback for getting its netdevAchiad Shochat2-1/+73
For Eth ports only: Maintain a net device pointer in mlx5_ib_device and update it upon NETDEV_REGISTER and NETDEV_UNREGISTER events if the net-device and IB device have the same PCI parent device. Implement the get_netdev callback to return this net device. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/mlx5: Support IB device's callback for getting the link layerAchiad Shochat1-6/+19
Make the existing mlx5_ib_port_link_layer() signature match the ib device callback signature (add port_num parameter). Refactor it to use a sub function so that the link layer could be queried also before the ibdev is created. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/usnic: delete unneeded IS_ERR testJulia Lawall1-2/+2
kzalloc doesn't return ERR_PTR, so there is no need to test for it. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,e; @@ * x = kzalloc(...) ... when != x = e * IS_ERR_OR_NULL(x) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Dave Goodell <dgoodell@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/usnic: Handle 0 counts in resource allocationNelson Escobar1-25/+29
Signed-off-by: Dave Goodell <dgoodell@cisco.com> Reviewed-by: Reese Faucette <rfaucett@cisco.com> Reviewed-by: Xuyang Wang <xuywang@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/usnic: Fix resource leak in error caseNelson Escobar1-1/+1
Signed-off-by: Dave Goodell <dgoodell@cisco.com> Reviewed-by: Reese Faucette <rfaucett@cisco.com> Reviewed-by: Xuyang Wang <xuywang@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB/usnic: Support more QP state transitionsNelson Escobar1-9/+9
They were already implemented at a lower layer, but the upper level routine placed arbitrary restrictions on which transitions were permitted. Simplify the state machine logic to live wholly in usnic_ib_qp_grp_modify. Signed-off-by: Dave Goodell <dgoodell@cisco.com> Reviewed-by: Reese Faucette <rfaucett@cisco.com> Reviewed-by: Xuyang Wang <xuywang@cisco.com> Signed-off-by: Nelson Escobar <neescoba@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.