aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-07-05cxgb3: Convert t3_l2t_get() over to dst_neigh_lookup().David S. Miller1-2/+3
This means passing in a suitable destination address. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-14RDMA/ocrdma: Fix off by one in ocrdma_query_gid()Dan Carpenter1-1/+1
The dev->sgid_tbl[] array is allocated in ocrdma_alloc_resources(). It has OCRDMA_MAX_SGID elements so the test here is off by one. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-11RDMA/ocrdma: Fixed RQ error CQE pollingParav Pandit1-1/+3
Fix RQ/SRQ error CQE polling. Return error CQE to consumer for error case which was not returned previously. Signed-off-by: Parav Pandit <parav.pandit@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-11RDMA/ocrdma: Correct queue SGE calculationMahesh Vardhamanaiah4-3/+10
Fix max sge calculation for sq, rq, srq for all hardware types. Signed-off-by: Mahesh Vardhamanaiah <mahesh.vardhamanaiah@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-11RDMA/ocrdma: Correct reported max queue sizesMahesh Vardhamanaiah2-11/+6
Fix code to read the max wqe and max rqe values from mailbox response. Signed-off-by: Mahesh Vardhamanaiah <mahesh.vardhamanaiah@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-11RDMA/ocrdma: Fixed GID table for vlan and eventsParav Pandit1-29/+34
1. Fix reporting GID table addition events. 2. Enable vlan based GID entries only when VLAN is enabled at compile time (test CONFIG_VLAN_8021Q / CONFIG_VLAN_8021Q_MODULE). Signed-off-by: Parav Pandit <parav.pandit@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-06Merge branches 'cxgb4', 'mlx4' and 'ocrdma' into for-linusRoland Dreier9-39/+33
2012-06-06IB/mlx4: Fix max_wqe capacity reported from query deviceSagi Grimberg3-7/+24
1. Limit the max number of WQEs per QP reported when querying the device, so that ib_create_qp() will not fail for a QP size that the device claimed to support due to additional headroom WQEs being allocated. 2. Limit qp resources accepted for ib_create_qp() to the limits reported in ib_query_device(). In kernel space, make sure that the limits returned to the caller following qp creation also lie within the reported device limits. For userspace, report as before, and do adjustment in libmlx4 (so as not to break ABI). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Sagi Grimberg <sagig@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-03IB/mlx4: Fix EQ deallocation in legacy modeShlomo Pongratz1-12/+7
Commit e605b743f33d ("IB/mlx4: Increase the number of vectors (EQs) available for ULPs") didn't handle correctly the case where there aren't enough MSI-X vectors to increase the number of EQs, so only the legacy EQs are allocated. This results in an attempt to memset() to zero the EQ table which was never allocated and a kernel crash. Fix this by checking in the teardown flow if the table of EQs was ever allocated. Also remove some unneeded setting to zero of the EQ related fields in struct mlx4_ib_dev. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-03RDMA/cxgb4: Fix crash when peer address is 0.0.0.0Thadeu Lima de Souza Cascardo1-0/+4
When using rping -c -a 0.0.0.0 with iw_cxgb4, the system crashes when rdma_connect() is called. ip_dev_find() will return NULL, but pdev is accessed anyway. Checking that pdev is NULL and returning -ENODEV prevents the system from crashing. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-29RDMA/ocrdma: Remove unnecessary version.h includesDevendra Naga2-2/+0
"make versioncheck" shows: drivers/infiniband/hw/ocrdma/ocrdma_main.c: 29 linux/version.h not needed. drivers/infiniband/hw/ocrdma/ocrdma_verbs.h: 31 linux/version.h not needed. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-29RDMA/ocrdma: Fix signaled event for SRQ_LIMIT_REACHEDParav Pandit1-1/+1
Signed-off-by: Parav Pandit <parav.pandit@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-29RDMA/ocrdma: Correct queue free count mathParav Pandit4-17/+1
Correct queue free count math for SQ, RQ for all hardware type. Update user-kernel ABI interface. Signed-off-by: Parav Pandit <parav.pandit@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-21Merge branches 'core', 'cxgb4', 'ipath', 'iser', 'lockdep', 'mlx4', 'nes', 'ocrdma', 'qib' and 'raw-qp' into for-linusRoland Dreier48-333/+9577
2012-05-21RDMA/cxgb4: Include vmalloc.h for vmalloc and vfreeVipul Pandya1-0/+1
Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18IB/mlx4: Fix mlx4_ib_add() error flowJack Morgenstein1-3/+3
We need to use a different loop index for mlx4_counter_alloc() and for device_create_file() iterations: the mlx4_counter_alloc() loop index is used in the error flow to free counters. If the same loop index is used for device_create_file() and, say, the device_create_file() loop fails on the first iteration, the allocated counters will not be freed. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18IB/mlx4: Increase the number of vectors (EQs) available for ULPsShlomo Pongratz3-0/+89
Enable IB ULPs to use a larger portion of the device EQs (which map to IRQs). The mlx4_ib driver follows the mlx4_core framework of the EQs to be divided among the device ports. In this scheme, for each IB port, the number of allocated EQs follows the number of cores, subject to other system constraints, such as number available MSI-X vectors. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18RDMA/cxgb4: Add query_qp supportVipul Pandya3-0/+32
This allows querying the QP state before flushing. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18RDMA/cxgb4: Remove kfifo usageVipul Pandya7-150/+203
Using kfifos for ID management was limiting the number of QPs and preventing NP384 MPI jobs. So replace it with a simple bitmap allocator. Remove IDs from the IDR tables before deallocating them. This bug was causing the BUG_ON() in insert_handle() to fire because the ID was getting reused before being removed from the IDR table. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18RDMA/cxgb4: Use vmalloc() for debugfs QP dumpVipul Pandya2-2/+20
This allows dumping thousands of QPs. Log active open failures of interest. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18RDMA/cxgb4: DB Drop Recovery for RDMA and LLD queuesVipul Pandya4-12/+259
Add module option db_fc_threshold which is the count of active QPs that trigger automatic db flow control mode. Automatically transition to/from flow control mode when the active qp count crosses db_fc_theshold. Add more db debugfs stats On DB DROP event from the LLD, recover all the iwarp queues. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18RDMA/cxgb4: Disable interrupts in c4iw_ev_dispatch()Vipul Pandya3-6/+9
Use GFP_ATOMIC in _insert_handle() if ints are disabled. Don't panic if we get an abort with no endpoint found. Just log a warning. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18RDMA/cxgb4: Add DB Overflow AvoidanceVipul Pandya4-12/+162
Get FULL/EMPTY/DROP events from LLD. On FULL event, disable normal user mode DB rings. Add modify_qp semantics to allow user processes to call into the kernel to ring doobells without overflowing. Add DB Full/Empty/Drop stats. Mark queues when created indicating the doorbell state. If we're in the middle of db overflow avoidance, then newly created queues should start out in this mode. Bump the C4IW_UVERBS_ABI_VERSION to 2 so the user mode library can know if the driver supports the kernel mode db ringing. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18RDMA/cxgb4: Add debugfs RDMA memory statsVipul Pandya5-3/+155
Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-15RDMA/cxgb4: Drop peer_abort when no endpoint foundSteve Wise1-0/+6
Log a warning and drop the abort message. Otherwise we will do a bogus wake_up() and crash. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-15RDMA/cxgb4: Always wake up waiters in c4iw_peer_abort_intr()Steve Wise1-4/+1
This fixes a race where an ingress abort fails to wake up the thread blocked in rdma_init() causing the app to hang. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14RDMA/nes: Don't call event handler if pointer is NULLTatyana Nikolova1-1/+2
Don't call the ibqp event_handler pointer in the case it wasn't initialized. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Donald Wood <Donald.E.Wood@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14RDMA/nes: Fix for the ORD value of the connecting peerTatyana Nikolova1-0/+4
Set ORD value of the connecting peer to be at least one in order to accommodate an RDMA READ Request message. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Donald Wood <Donald.E.Wood@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14IB/qib: Add cache line awareness to qib_qp and qib_devdata structuresMike Marciniszyn7-94/+120
This patch reorganizes the QP and devdata files to be more cache line aware. qib_qp fields in particular are split into read-mostly, send, and receive fields. qib_devdata fields are split into read-mostly and read/write fields Testing has show that bidirectional tests improve by as much as 100% with this patch. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14IB/qib: MADs with misset M_Keys should return failureJim Foraker1-1/+3
If a MAD is sent directly to the local HCA rather than placed on a QP and the MAD fails M_Key checks, there is no means to generate a timeout for the client, which may hang. Instead we report IB_MAD_RESULT_FAILURE, which operates the same for on-the-wire packets, but will generate a send failure back to the client. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jim Foraker <foraker1@llnl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14IB/qib: Fix M_Key lease timeout handlingJim Foraker1-15/+29
If a port has an M_Key lease set, the M_Key protect bits set to 1, and a SubnSet arrives with an invalid M_Key, an M_Key mismatch trap is generated, the lease timer begins as expected, and eventually the M_Key protect bits will be set back to 0 as per the spec. However, if any other SMP with an invalid M_Key arrives, the lease timer is expired and the M_Key protect bits remain in force. This is not according to to spec. In particular, C14-17 says that a lease timer that is underway is not affected by protection level checks (ie, at protection level 1, a SubnGet with a bad M_Key may be successful, but does not stop the timer), and C14-19 says that the timer shall stop when a valid M_Key has been received. C14-19 is the only compliance statement that specifies a stopping condition for the timer. This behavior is magnified if the port's Master SM LID attribute points at itself. In that case, the M_Key mismatch trap is sufficient to expire the timer, and the mkey lease attribute is rendered useless. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Signed-off-by: Jim Foraker <foraker1@llnl.gov> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14IB/qib: Fix QLE734X link cyclingMitko Haralanov1-1/+1
The SERDES was using the incorrect Frequency Loop Bandwidth setting causing the link to cycle through the Physical link negotiation state machine. Fixing the Frequency Loop Bandwidth setting in the SERDES helps the link come up faster and more reliably. Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14IB/qib: Display correct value for number of contextsMitko Haralanov2-3/+7
A "fix" for a bug with the number of contexts on a single-port board caused the calculation to be off by one, which causes problems with the upper layers. The same problem exists for number of free contexts, which is also fixed here. Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14IB/qib: Correct ordering of reregister vs. port active eventsTodd Rimmer1-9/+8
When a port first goes active with SMA Set(PortInfo) and reregister bit set, the driver sends up the reregister event followed by a port active event. The problem is that in response to reregister event most apps try to issue a SA query of some sort, but that fails because port is not active. The qib driver needs to a trivial change to correct this behavior. This issue has been there for a while; however the recent serdes work has probably made the delay between the reregister event and the active event larger and hence opened the race far enough so that its being seen more often. The patch also changes the clientrereg local to a u8 and saves off the rereg bit into it. The code following the nested subn_get_portinfo() now restores that bit per o14-12.2.1 with a logical OR from that copy. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14IB/qib: Optimize pio ack buffer allocationMike Marciniszyn5-9/+28
This patch optimizes pio buffer allocation in the kernel. For qib, kernel pio buffers are used for sending acks. The code to allocate the buffer would always start at 0 until it found a buffer. This means that an average of 64 comparisions were done on each allocate, since the busy bit won't be cleared until the bits are refreshed when buffers are exhausted. This patch adds two new fields in the devdata struct, last_pio and min_kernel_pio. last_pio is the last buffer that was allocated. min_kernel_pio is the lowest potential available buffer. min_kernel_pio is modifed as contexts are allocated and deallocted. Reviewed-by: Ramkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-14IB/qib: Add prefetch for eager buffersMike Marciniszyn1-1/+4
Add a prefetch call when a packet has been stored. The nature of the prefetch is correctly determined by the alternatives mechanism. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08IB/mlx4: Replace printk(KERN_yyy...) with pr_yyy(...)Shlomo Pongratz5-25/+25
Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> [ Replace one more printk_once() with pr_info_once(). - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08IB/mlx4: Put priority bits in WQE of IBoE MLX QPOren Duer1-3/+3
Otherwise CM packets going over MLX QP1 get fixed scheduling priority 0. We want CM packets to get the same scheduling priority, and therefore map to the same SQ (Schedule Queue) and eventually TC (Traffic Class), as the application requested for the actual QP used for the connection. Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08IB/mlx4: Add raw packet QP supportOr Gerlitz1-3/+23
Implement raw packet QPs for Ethernet ports using the MLX transport (as done by the mlx4_en Ethernet netdevice driver). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08RDMA/ocrdma: Fix build with IPV6=nRoland Dreier2-9/+22
When IPV6 is not enabled: ERROR: "register_inet6addr_notifier" [drivers/infiniband/hw/ocrdma/ocrdma.ko] undefined! ERROR: "unregister_inet6addr_notifier" [drivers/infiniband/hw/ocrdma/ocrdma.ko] undefined! Fix this by wrapping the inet6 calls in #ifdef IPV6. Also make the ocrdma module depend on (IPV6 || IPV6=n) to forbid the case of modular ipv6 but built-in ocrdma (which can't work, because ocrdma calls ipv6 functions). Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08RDMA/ocrdma: Tiny locking cleanupDan Carpenter1-5/+5
We only need to disable the IRQs one time. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [ Rename "wq_flags" to more conventional "flags." - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08RDMA/ocrdma: Fix check for NULL instead of IS_ERRDan Carpenter1-2/+2
The ocrdma_alloc_lkey() function never returns NULL pointers -- it returns ERR_PTRs. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08RDMA/ocrdma: Don't sleep in atomic notifier handlerSasha Levin2-16/+23
Events sent to ocrdma_inet6addr_event() are sent from an atomic context, therefore we can't try to lock a mutex within the notifier callback. We could just switch the mutex to a spinlock since all it does it protect a list, but I've gone ahead and switched the list to use RCU instead. I couldn't fully test it since I don't have IB hardware, so if it doesn't fully work for some reason let me know and I'll switch it back to using a spinlock. Signed-off-by: Sasha Levin <levinsasha928@gmail.com> [ Fixed locking in ocrdma_add(). - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08RDMA/ocrdma: Remove write-only variablesRoland Dreier2-10/+2
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08RDMA/ocrdma: Set event's device member in ocrdma_dispatch_ibevent()Roland Dreier1-1/+3
We need to set ib_evt.device, or else ib_dispatch_event() will crash when we call it for unaffiliated events (and consumers may get confused in their QP/CQ/SRQ event handler for affiliated events). Also fix sparse warning: drivers/infiniband/hw/ocrdma/ocrdma_hw.c:678:36: warning: Using plain integer as NULL pointer There's no need to clear ib_evt, since every member is initialized. Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08RDMA/ocrdma: Make needlessly global functions/structs staticRoland Dreier2-9/+9
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08RDMA/ocrdma: Fix warnings about uninitialized variablesRoland Dreier2-3/+4
First, fix drivers/infiniband/hw/ocrdma/ocrdma_verbs.c: In function 'ocrdma_alloc_pd': drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:371:17: warning: 'dpp_page_addr' may be used uninitialized in this function [-Wuninitialized] drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:337:6: note: 'dpp_page_addr' was declared here which seems that it may border on a bug (the call to ocrdma_del_mmap() might conceivably do bad things if pd->dpp_enabled is not set and dpp_page_addr ends up with just the wrong value). Also take care of: drivers/infiniband/hw/ocrdma/ocrdma_hw.c: In function 'ocrdma_init_hw': drivers/infiniband/hw/ocrdma/ocrdma_hw.c:2587:5: warning: 'status' may be used uninitialized in this function [-Wuninitialized] drivers/infiniband/hw/ocrdma/ocrdma_hw.c:2549:17: note: 'status' was declared here which is only real if num_eq == 0, which should be impossible. Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapterParav Pandit12-0/+8391
Signed-off-by: Parav Pandit <parav.pandit@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08IB/ipath: Replace open-coded ARRAY_SIZE with macroMike Marciniszyn1-2/+1
Change sizeof(array)/sizeof(array[0]) to ARRAY_SIZE. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-08IB/ipath: Replace open-coded ARRAY_SIZE with macroJim Cromie1-2/+1
Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.