aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-02-18RDMA/ocrdma: Use unsigned for bit indexRasmus Villemoes1-3/+3
In the expressions idx/32 and idx%32, both idx and 32 have signed type, and unfortunately the C standard prescribes rounding to 0, so unless gcc can prove that idx is non-negative, these cannot be implemented as simple shift respectively mask operations. Help gcc by changing the type of idx to unsigned - this cuts another few instructions from the generated code. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Help gcc generate better code for ocrdma_srq_toggle_bitRasmus Villemoes1-4/+1
gcc emits a surprising amount of code in order to flip a bit. One would think that a single instruction is enough. $ scripts/bloat-o-meter /tmp/ocrdma_verbs.o drivers/infiniband/hw/ocrdma/ocrdma_verbs.o add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-142 (-142) function old new delta ocrdma_post_srq_recv 498 460 -38 ocrdma_poll_cq 2010 1962 -48 ocrdma_discard_cqes 495 439 -56 All three calls of ocrdma_srq_toggle_bit happen within spinlocks, so saving a few useless instructions might be worthwhile. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Update the ocrdma module version stringMitesh Ahuja1-1/+1
Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: set vlan present bit for user AHDevesh Sharma4-6/+22
For the AH that describs a VLAN interface details, vlan present bit needs to be set during posting a WQE. This patch adds the code to allow it happening. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: remove reference of ocrdma_dev out of ocrdma_qp structureMitesh Ahuja3-29/+34
Use get_ocrdma_dev(ocrdma_qp->ibqp.device) function to access ocrdma device pointer. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Add support for interrupt moderationMitesh Ahuja4-0/+119
Add support for interrupt moderation for ocrdma device. Thresholds for high interrupt rates are static values derived based on experimental results. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Honor return value of ocrdma_resolve_dmacDevesh Sharma1-1/+3
Check for return value for ocrdma_resolve_dmac while setting AV params. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Allow expansion of the SQ CQEs via buddy CQ expansion of the QPSelvin Xavier1-22/+44
If the SQ and RQ of the QP in error state uses separate CQs, traverse the list of QPs using each CQs and invoke the buddy CQ handler for both SQ and RQ. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Discontinue support of RDMA-READ-WITH-INVALIDATEDevesh Sharma1-2/+0
Remove support for RDMA-READ-WITH-INVALIDATE from ocrdma driver. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Host crash on destroying device resourcesMitesh Ahuja2-15/+10
1. Cleanup sequence in ocrdma_remove(). The device should be unregistered from IB stack before any device specific cleanup. 2. Always return success in the resource destroy path. In case destroy command returns error, IB stack will trigger cleanup again while closing the uverbs device causing kernel panic BUG_ON(). Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Report correct state in ibv_query_qpPadmanabh Ratnakar1-2/+4
Fix ocrdma_query_qp to refelect correct qp state based on FW. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Debugfs enhancments for ocrdma driverSelvin Xavier6-3/+183
1. Add statistics counters for error cqes. 2. Add file ("reset_stats") to reset rdma stats in Debugfs. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Report correct count of interrupt vectors while registering ocrdma deviceDevesh Sharma1-1/+1
Fix ocrdma_register_device to initialize correct number of interrupt vectors in device pointer. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Move PD resource management to driver.Mitesh Ahuja7-2/+298
Move PD allocation and deallocation from firmware to driver. At driver load time all the PDs will be requested from firmware and their management will be handled by driver to reduce mailbox commands overhead at runtime. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Increase the GID table size.Mitesh Ahuja1-1/+1
Increase the GID table size from 8 to 16 enteries. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Add support for IB stack compliant stats in sysfs.Mitesh Ahuja3-1/+89
Add the following per-port sysfs traffic counters for RoCE: port_xmit_packets port_rcv_packets port_rcv_data port_xmit_data Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/mlx5: Update the dev in reg_createMajd Dibbiny1-0/+1
When we create an MR using reg_create, the mlx5_ib_dev pointer is not updated on the new MR. This results in a kernel panics for ODP MRs while handling page faults, when the mlx5_ib_update_mtt function uses the invalid device pointer. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/mlx4: In mlx4_ib_demux_cm, print out GUID in host-endian orderJack Morgenstein1-1/+1
If a GUID is not found, the 64-bit GUID printed in the message log warning should converted to host-endian order for printing. Found by Doug Ledford and Hal Rosenstock. Fix suggested by Hal. Signed-off-by: Hal Rosenstock <hal@dev.mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/mlx4: Bug fixes in mlx4_ib_resize_cqMajd Dibbiny1-4/+3
1. Before the entries alignment, we need to check that the entries doesn't exceed the device's max cqe. 2. After the alignment, we need to make sure that the aligned number doesn't exceed the max cqes+1. The additional cqe is used to denote that the resizing operation has completed. 3. If the users asks to resize the CQ with entries less than the oustanding cqes we should fail instead of returning 0. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/mlx4: Fix memory leak in __mlx4_ib_modify_qpMajd Dibbiny1-2/+4
In case handle_eth_ud_smac_index fails, we need to free the allocated resources. Fixes: 2f5bb473681b ("mlx4: Add ref counting to port MAC table for RoCE") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17Merge branch 'debugfs_automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-24/+11
Pull debugfs patches from Al Viro: "debugfs patches, mostly to make it possible for something like tracefs to be transparently automounted on given directory in debugfs. New primitive in there is debugfs_create_automount(name, parent, func, arg), which creates a directory and makes its ->d_automount() return func(arg). Another missing primitive was debugfs_create_file_size() - open-coded in quite a few places. Dave's patch adds it and converts the open-code instances to calling it" * 'debugfs_automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: debugfs: Provide a file creation function that also takes an initial size new primitive: debugfs_create_automount() debugfs: split end_creating() into success and failure cases debugfs: take mode-dependent parts of debugfs_get_inode() into callers fold debugfs_mknod() into callers fold debugfs_create() into caller fold debugfs_mkdir() into caller debugfs_mknod(): get rid useless arguments fold debugfs_link() into caller debugfs: kill __create_file() debugfs: split the beginning and the end of __create_file() off debugfs_{mkdir,create,link}(): get rid of redundant argument
2015-02-17IB/qib: Fix sizeof checkpatch warningsMike Marciniszyn17-63/+64
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/qib: Replace rcu_assign_pointer() with RCU_INIT_POINTER() in qib_keys.cAndreea-Cristina Bernat1-2/+2
The uses of "rcu_assign_pointer()" are NULLing out the pointers. According to RCU_INIT_POINTER()'s block comment: "1. This use of RCU_INIT_POINTER() is NULLing out the pointer" it is better to use it instead of rcu_assign_pointer() because it has a smaller overhead. The following Coccinelle semantic patch was used: @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., NULL) [Derived from http://marc.info/?l=linux-rdma&m=140836519219236&w=2] Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/qib: Replace rcu_assign_pointer() with RCU_INIT_POINTER() in qib_qp.cAndreea-Cristina Bernat1-4/+4
According to RCU_INIT_POINTER()'s block comment 3.a, it can be used if "1. This use of RCU_INIT_POINTER() is NULLing out the pointer" it is better to use it instead of rcu_assign_pointer() because it has a smaller overhead. "3. The referenced data structure has already been exposed to readers either at compile time or via rcu_assign_pointer() -and- a. You have not made -any- reader-visible changes to this structure since then". These cases fulfill the conditions above because between the rcu_dereference_protected() call and the rcu_assign_pointer() call there is no update of that value. Therefore, this patch makes the replacement. The following Coccinelle semantic patch was used: @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., ( rtnl_dereference(...) | rcu_dereference_protected(...) ) ) [consolidated from http://marc.info/?l=linux-rdma&m=140836578119485&w=2 and http://marc.info/?l=linux-rdma&m=140906361403047&w=2] Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/mlx5: Fix error code in get_port_caps()Dan Carpenter1-1/+1
The current code returns success when kmalloc() fails. It should return an error code, -ENOMEM. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17debugfs: Provide a file creation function that also takes an initial sizeDavid Howells1-24/+11
Provide a file creation function that also takes an initial size so that the caller doesn't have to set i_size, thus meaning that we don't have to call deal with ->d_inode in the callers. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-16IB/qib: Add support for the new QMH7360 cardVinit Agnihotri1-0/+5
Add support to recognize another board variation named QMH7360. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-16IB/qib: Do not write EEPROMMitko Haralanov7-220/+1
This changeset removes all the code that allows the driver to write to the EEPROM and update the recorded error counters and power on hours. These two stats are unused and writing them exposes a timing risk which could leave the EEPROM in a bad state preventing further normal operation of the HCA. Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-16IB/mlx4: Fix wrong usage of IPv4 protocol for multicast attach/detachOr Gerlitz1-5/+5
The MLX4_PROT_IB_IPV4 protocol should only be used with RoCEv2 and such. Removing this wrong usage allows to run multicast applications over RoCE. Fixes: d487ee77740c ("IB/mlx4: Use IBoE (RoCE) IP based GIDs in the port GID table") Reported-by: Carol Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-13IB/ipath: Remove unused function in ipath_wc_ppc64Rickard Strandqvist3-31/+0
Remove the function ipath_unordered_wc() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-13RDMA/cxgb4: Serialize CQ event upcalls with CQ destructionHariprasad S1-1/+8
A race exists where the application can be destroying the CQ concurrently with a HW interrupt indicating a completion has been inserted into the CQ. This can cause an event notification upcall to the application after the CQ has been destroyed. The solution is to serialize looking up the CQ in the IDR table and referencing the CQ in c4iw_ev_handler() with removing the CQID from the IDR table and blocking until the refcnt reaches 0 in c4iw_destroy_cq(). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds20-669/+1015
Pull networking updates from David Miller: 1) More iov_iter conversion work from Al Viro. [ The "crypto: switch af_alg_make_sg() to iov_iter" commit was wrong, and this pull actually adds an extra commit on top of the branch I'm pulling to fix that up, so that the pre-merge state is ok. - Linus ] 2) Various optimizations to the ipv4 forwarding information base trie lookup implementation. From Alexander Duyck. 3) Remove sock_iocb altogether, from CHristoph Hellwig. 4) Allow congestion control algorithm selection via routing metrics. From Daniel Borkmann. 5) Make ipv4 uncached route list per-cpu, from Eric Dumazet. 6) Handle rfs hash collisions more gracefully, also from Eric Dumazet. 7) Add xmit_more support to r8169, e1000, and e1000e drivers. From Florian Westphal. 8) Transparent Ethernet Bridging support for GRO, from Jesse Gross. 9) Add BPF packet actions to packet scheduler, from Jiri Pirko. 10) Add support for uniqu flow IDs to openvswitch, from Joe Stringer. 11) New NetCP ethernet driver, from Muralidharan Karicheri and Wingman Kwok. 12) More sanely handle out-of-window dupacks, which can result in serious ACK storms. From Neal Cardwell. 13) Various rhashtable bug fixes and enhancements, from Herbert Xu, Patrick McHardy, and Thomas Graf. 14) Support xmit_more in be2net, from Sathya Perla. 15) Group Policy extensions for vxlan, from Thomas Graf. 16) Remove Checksum Offload support for vxlan, from Tom Herbert. 17) Like ipv4, support lockless transmit over ipv6 UDP sockets. From Vlad Yasevich. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1494+1 commits) crypto: fix af_alg_make_sg() conversion to iov_iter ipv4: Namespecify TCP PMTU mechanism i40e: Fix for stats init function call in Rx setup tcp: don't include Fast Open option in SYN-ACK on pure SYN-data openvswitch: Only set TUNNEL_VXLAN_OPT if VXLAN-GBP metadata is set ipv6: Make __ipv6_select_ident static ipv6: Fix fragment id assignment on LE arches. bridge: Fix inability to add non-vlan fdb entry net: Mellanox: Delete unnecessary checks before the function call "vunmap" cxgb4: Add support in cxgb4 to get expansion rom version via ethtool ethtool: rename reserved1 memeber in ethtool_drvinfo for expansion ROM version net: dsa: Remove redundant phy_attach() IB/mlx4: Reset flow support for IB kernel ULPs IB/mlx4: Always use the correct port for mirrored multicast attachments net/bonding: Fix potential bad memory access during bonding events tipc: remove tipc_snprintf tipc: nl compat add noop and remove legacy nl framework tipc: convert legacy nl stats show to nl compat tipc: convert legacy nl net id get to nl compat tipc: convert legacy nl net id set to nl compat ...
2015-02-09IB/mlx4: Reset flow support for IB kernel ULPsYishai Hadas5-6/+191
The driver exposes interfaces that directly relate to HW state. Upon fatal error, consumers of these interfaces (ULPs) that rely on completion of all their posted work-request could hang, thereby introducing dependencies in shutdown order. To prevent this from happening, we manage the relevant resources (CQs, QPs) that are used by the device. Upon a fatal error, we now generate simulated completions for outstanding WQEs that were not completed at the time the HW was reset. It includes invoking the completion event handler for all involved CQs so that the ULPs will poll those CQs. When polled we return simulated CQEs with IB_WC_WR_FLUSH_ERR return code enabling ULPs to clean up their resources and not wait forever for completions upon receiving remove_one. The above change requires an extra check in the data path to make sure that when device is in error state, the simulated CQEs will be returned and no further WQEs will be posted. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-09IB/mlx4: Always use the correct port for mirrored multicast attachmentsMoni Shoua1-1/+5
When attaching a QP to a multicast address in bonded mode, there was an assumption that the port of the QP must be #1. This assumption isn't the case under the flow which enables maximal usage of the physical ports. Fix it by always checking the port of the original flow and create the mirrored flow on the other port. Fixes: c6215745b66a ('IB/mlx4: Load balance ports in port aggregation mode') Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06Revert "IB/core: Add support for extended query device caps"Yann Droneaud1-2/+0
While commit 7e36ef8205ff ("IB/core: Temporarily disable ex_query_device uverb") is correct as it makes the extended QUERY_DEVICE uverb (which came as part of commit 5a77abf9a97a ("IB/core: Add support for extended query device caps") and commit 860f10a799c8 ("IB/core: Add flags for on demand paging support")) not available to userspace, it doesn't address the initial issue regarding ib_copy_to_udata() [1][2]. Additionally, further discussions around this new uverb seems to conclude it would require a different data structure than the one currently described in <rdma/ib_user_verbs.h> [3]. Both of these issues require a revert of the changes, so this patch partially reverts commit 8cdd312cfed7 ("IB/mlx5: Implement the ODP capability query verb") and commit 860f10a799c8 ("IB/core: Add flags for on demand paging support") and fully reverts commit 5a77abf9a97a ("IB/core: Add support for extended query device caps"). [1] "Re: [PATCH v3 06/17] IB/core: Add support for extended query device caps" http://mid.gmane.org/1418733236.2779.26.camel@opteya.com [2] "Re: [PATCH] IB/core: Temporarily disable ex_query_device uverb" http://mid.gmane.org/1423067503.3030.83.camel@opteya.com [3] "RE: [PATCH v1 1/5] IB/uverbs: ex_query_device: answer must not depend on request's comp_mask" http://mid.gmane.org/2807E5FD2F6FDA4886F6618EAC48510E0CC12C30@CRSMSX101.amr.corp.intel.com Cc: Eli Cohen <eli@mellanox.com> Cc: Haggai Eran <haggaie@mellanox.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-04IB/mlx4: Load balance ports in port aggregation modeMoni Shoua4-0/+29
When the mlx4 IB (RoCE) device works in link aggregation mode, it exposes a single port to upper layers. Therefore, applications always set '1' in port_num attribute when modifying a QP or creating an address handle. To make sure that a node uses all available ports the mlx4 driver will override the port_num attribute with a round robin policy. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04IB/mlx4: Create mirror flows in port aggregation modeMoni Shoua2-13/+80
In port aggregation mode flows for port #1 (the only port) should be mirrored on port #2. This is because packets can arrive from either physical ports. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04IB/mlx4: Add port aggregation supportMoni Shoua1-6/+70
Register the interface with the mlx4 core driver with port aggregation support and check for port aggregation mode when the 'add' function is called. In this mode, only one physical port is reported to the upper layer (RoCE/IB core stack and ULPs). Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04IB/mlx4: Reuse mlx4_mac_to_u64()Moni Shoua1-11/+1
This function is implemented twice... get rid of one copy. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-25net/mlx4_core: Maintain a persistent memory for mlx4 deviceYishai Hadas5-14/+20
Maintain a persistent memory that should survive reset flow/PCI error. This comes as a preparation for coming series to support above flows. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16iw_cxgb4: Cleanup register defines/MACROS defined in t4fw_ri_api.hHariprasad Shenai7-483/+483
Cleanup all the MACROS that are defined in t4fw_ri_api.h and affected files Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16iw_cxgb4: Cleanup register defines/MACROS defined in t4.hHariprasad Shenai3-70/+70
Cleanup all the MACROS defined in t4.h and the affected files Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15net/mlx4: Don't disable vxlan offloads under DMFS-A0 optimized steeringOr Gerlitz1-1/+2
Except for VXLAN steering rules, all offloads should work as they were under plain DMFS mode. Fix that by enabling all the offloads under DMFS-A0 mode, except for VXLAN steering rules. Fixes: d57febe1a478 "net/mlx4: Add A0 hybrid steering" Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko1-6/+7
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13infiniband: mlx5: avoid a compile-time warningArnd Bergmann1-1/+1
The return type of find_first_bit() is architecture specific, on ARM it is 'unsigned int', while the asm-generic code used on x86 and a lot of other architectures returns 'unsigned long'. When building the mlx5 driver on ARM, we get a warning about this: infiniband/hw/mlx5/mem.c: In function 'mlx5_ib_cont_pages': infiniband/hw/mlx5/mem.c:84:143: warning: comparison of distinct pointer types lacks a cast m = min(m, find_first_bit(&tmp, sizeof(tmp))); This patch changes the driver to use min_t to make it behave the same way on all architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12iw_cxgb4/cxgb4/cxgb4vf/cxgb4i/csiostor: Cleanup register defines/macros related to all other cpl messagesHariprasad Shenai2-12/+12
This patch cleanups all other macros/register define related to CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12iw_cxgb4/cxgb4/cxgb4i: Cleanup register defines/MACROS related to CM CPL messagesHariprasad Shenai1-39/+39
This patch cleanups all macros/register define related to connection management CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-05RDMA/cxgb4/cxgb4vf/csiostor: Cleanup SGE register definesHariprasad Shenai1-13/+13
This patch cleanups all SGE related macros/register defines that are defined in t4_regs.h and the affected files. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-15Merge branches 'core', 'cxgb4', 'ipoib', 'iser', 'mlx4', 'ocrdma', 'odp' and 'srp' into for-nextRoland Dreier19-116/+1496
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.