aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-05-20IB/core: Add per port immutable struct to ib_deviceIra Weiny12-0/+203
As of commit 5eb620c81ce3 "IB/core: Add helpers for uncached GID and P_Key searches"; pkey_tbl_len and gid_tbl_len are immutable data which are stored in the ib_device. The per port core capability flags to be added later are also immutable data to be stored in the ib_device object. In preparation for this create a structure for per port immutable data and place the pkey and gid table lengths within this structure. "get_port_immutable" is added as a mandatory device function to allow the drivers to fill in this data. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18IB/Verbs: Implement new callback query_protocol()Michael Wang18-0/+94
Add new callback query_protocol() and implement for each HW. Mapping List: node-type link-layer transport protocol nes RNIC ETH IWARP IWARP amso1100 RNIC ETH IWARP IWARP cxgb3 RNIC ETH IWARP IWARP cxgb4 RNIC ETH IWARP IWARP usnic USNIC_UDP ETH USNIC_UDP USNIC_UDP ocrdma IB_CA ETH IB IBOE mlx4 IB_CA IB/ETH IB IB/IBOE mlx5 IB_CA IB IB IB ehca IB_CA IB IB IB ipath IB_CA IB IB IB mthca IB_CA IB IB IB qib IB_CA IB IB IB Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-12infiniband: Remove duplicated KERN_<LEVEL> from pr_<level> usesJoe Perches3-5/+4
These KERN_<LEVEL> uses are unnecessary with pr_<level> and cause bad logging output so remove them. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-12IB/qib: fix test of unsigned variableMike Marciniszyn2-2/+3
Commit d4988623cc60 ("IB/qib: use arch_phys_wc_add()") adjusted mtrr inititialization to use the new interface. Unfortunately, the new interface returns a signed value and the patch tested the unsigned wc_cookie. Fix the issue by changing the type of wc_cookie to int. For the success case the ret left at zero to avoid a warning from the caller. For failure wc_cookie is used as the ret. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-11iw_cxgb4: use wildcard mapping for getting remote addr infoSteve Wise1-8/+8
For listening endpoints bound to the wildcard address, we need to pass the wildcard address mapping to iwpm_get_remote_info() instead of the mapped address of the new child connection. Without this fix, and with iwarp port mapping enabled, each iw_cxgb4 connection that is spawned from a listening endpoint bound to the wildcard address, will generate an annoying dmesg entry about failing to find the remote address mapping info, and the connection state displayed in debugfs under /sys/kernel/debug/iw_cxgb4/<pci-slot-no>/eps will not have the peer's address/port mapping info. The connection still works though. Fixes: 5b6b8fe ("RDMA/cxgb4: Report the actual address of the remote connecting peer") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-11IB/ehca: use correct destination for memcpyNicholas Mc Guire1-2/+2
Using an element of a struct as the address for the memcpy of the whole struct may introduce a buffer overflow and does not help readability either simply pass the real thing as first argument to memcpy. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05iw_cxgb4: Remove negative advice dmesg warningsHariprasad S3-9/+32
Remove these log messages in favor of per-endpoint counters as well as device-global counters that can be inspected via debugfs. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05IB/qib: use arch_phys_wc_add()Luis R. Rodriguez7-79/+39
This driver already makes use of ioremap_wc() on PIO buffers, so convert it to use arch_phys_wc_add(). The qib driver uses a mmap() special case for when PAT is not used, this behaviour used to be determined with a module parameter but since we have been asked to just remove that module parameter this checks for the WC cookie, if not set we can assume PAT was used. If its set we do what we used to do for the mmap for when MTRR was enabled. The removal of the module parameter is OK given that Andy notes that even if users of module parameter are still around it will not prevent loading of the module on recent kernels. Cc: Doug Ledford <dledford@redhat.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: konrad.wilk@oracle.com Cc: ville.syrjala@linux.intel.com Cc: david.vrabel@citrix.com Cc: jbeulich@suse.com Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: infinipath@intel.com Cc: linux-rdma@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xensource.com Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05IB/qib: add acounting for MTRRLuis R. Rodriguez1-1/+1
There is no good reason not to, we eventually delete it as well. Cc: Toshi Kani <toshi.kani@hp.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mike Marciniszyn <infinipath@intel.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux-rdma@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05RDMA/cxgb4: Report the actual address of the remote connecting peerSteve Wise2-4/+51
Get the actual (non-mapped) ip/tcp address of the connecting peer from the port mapper Also setup the passive side endpoint to correctly display the actual and mapped addresses for the new connection. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05RDMA/nes: Report the actual address of the remote connecting peerTatyana Nikolova2-17/+49
Get the actual (non-mapped) ip/tcp address of the connecting peer from the port mapper and report the address info to the user space application at the time of connection establishment Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05iw_cxgb4: enforce qp/cq id requirementsHariprasad S1-0/+23
Currently the iw_cxgb4 implementation requires the qp and cq qid densities to match as well as the qp and cq id ranges. So fail a device open if the device configuration doesn't meet the requirements. The reason for these restictions has to do with the fact that IQ qid X has a UGTS register in the same bar2 page as EQ qid X. Thus both qids need to be allocated to the same user process for security reasons. The logic that does this (the qpid allocator in iw_cxgb4/resource.c) handles this but requires the above restrictions. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05iw_cxgb4: use BAR2 GTS register for T5 kernel mode CQsHariprasad S2-7/+15
For T5, we must not use the kdb/kgts registers, in order avoid db drops under extreme loads. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05iw_cxgb4: 32b platform fixesHariprasad S5-16/+15
- get_dma_mr() was using ~0UL which is should be ~0ULL. This causes the DMA MR to get setup incorrectly in hardware. - wr_log_show() needed a 64b divide function div64_u64() instead of doing division directly. - fixed warnings about recasting a pointer to a u64 Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05iw_cxgb4: Cleanup register defines/MACROSHariprasad S2-3/+5
Cleanup macros and register defines for consistency Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-26Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-18/+18
Pull fourth vfs update from Al Viro: "d_inode() annotations from David Howells (sat in for-next since before the beginning of merge window) + four assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() VFS: assorted d_backing_inode() annotations VFS: fs/inode.c helpers: d_inode() annotations VFS: fs/cachefiles: d_backing_inode() annotations VFS: fs library helpers: d_inode() annotations VFS: assorted weird filesystems: d_inode() annotations VFS: normal filesystems (and lustre): d_inode() annotations VFS: security/: d_inode() annotations VFS: security/: d_backing_inode() annotations VFS: net/: d_inode() annotations VFS: net/unix: d_backing_inode() annotations VFS: kernel/: d_inode() annotations VFS: audit: d_backing_inode() annotations VFS: Fix up some ->d_inode accesses in the chelsio driver VFS: Cachefiles should perform fs modifications on the top layer only VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-22Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds6-166/+391
Pull InfiniBand/RDMA updates from Roland Dreier: - IPoIB fixes from Doug Ledford and Erez Shitrit - iSER updates from Sagi Grimberg - mlx4 GUID handling changes from Yishai Hadas - other misc fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (51 commits) mlx5: wrong page mask if CONFIG_ARCH_DMA_ADDR_T_64BIT enabled for 32Bit architectures IB/iser: Rewrite bounce buffer code path IB/iser: Bump version to 1.6 IB/iser: Remove code duplication for a single DMA entry IB/iser: Pass struct iser_mem_reg to iser_fast_reg_mr and iser_reg_sig_mr IB/iser: Modify struct iser_mem_reg members IB/iser: Make fastreg pool cache friendly IB/iser: Move PI context alloc/free to routines IB/iser: Move fastreg descriptor pool get/put to helper functions IB/iser: Merge build page-vec into register page-vec IB/iser: Get rid of struct iser_rdma_regd IB/iser: Remove redundant assignments in iser_reg_page_vec IB/iser: Move memory reg/dereg routines to iser_memory.c IB/iser: Don't pass ib_device to fall_to_bounce_buff routine IB/iser: Remove a redundant struct iser_data_buf IB/iser: Remove redundant cmd_data_len calculation IB/iser: Fix wrong calculation of protection buffer length IB/iser: Handle fastreg/local_inv completion errors IB/iser: Fix unload during ep_poll wrong dereference ib_srpt: convert printk's to pr_* functions ...
2015-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: 1) Fix verifier memory corruption and other bugs in BPF layer, from Alexei Starovoitov. 2) Add a conservative fix for doing BPF properly in the BPF classifier of the packet scheduler on ingress. Also from Alexei. 3) The SKB scrubber should not clear out the packet MARK and security label, from Herbert Xu. 4) Fix oops on rmmod in stmmac driver, from Bryan O'Donoghue. 5) Pause handling is not correct in the stmmac driver because it doesn't take into consideration the RX and TX fifo sizes. From Vince Bridgers. 6) Failure path missing unlock in FOU driver, from Wang Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) net: dsa: use DEVICE_ATTR_RW to declare temp1_max netns: remove BUG_ONs from net_generic() IB/ipoib: Fix ndo_get_iflink sfc: Fix memcpy() with const destination compiler warning. altera tse: Fix network-delays and -retransmissions after high throughput. net: remove unused 'dev' argument from netif_needs_gso() act_mirred: Fix bogus header when redirecting from VLAN inet_diag: fix access to tcp cc information tcp: tcp_get_info() should fetch socket fields once net: dsa: mv88e6xxx: Add missing initialization in mv88e6xxx_set_port_state() skbuff: Do not scrub skb mark within the same name space Revert "net: Reset secmark when scrubbing packet" bpf: fix two bugs in verification logic when accessing 'ctx' pointer bpf: fix bpf helpers to use skb->mac_header relative offsets stmmac: Configure Flow Control to work correctly based on rxfifo size stmmac: Enable unicast pause frame detect in GMAC Register 6 stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree stmmac: Add defines and documentation for enabling flow control stmmac: Add properties for transmit and receive fifo sizes stmmac: fix oops on rmmod after assigning ip addr ...
2015-04-16cxgb4: drop __GFP_NOFAIL allocationMichal Hocko1-1/+1
set_filter_wr is requesting __GFP_NOFAIL allocation although it can return ENOMEM without any problems obviously (t4_l2t_set_switching does that already). So the non-failing requirement is too strong without any obvious reason. Drop __GFP_NOFAIL and reorganize the code to have the failure paths easier. The same applies to _c4iw_write_mem_dma_aligned which uses __GFP_NOFAIL and then checks the return value and returns -ENOMEM on failure. This doesn't make any sense what so ever. Either the allocation cannot fail or it can. del_filter_wr seems to be safe as well because the filter entry is not marked as pending and the return value is propagated up the stack up to c4iw_destroy_listen. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Jan Kara <jack@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-15Merge branches 'cve-fixup', 'ipoib', 'iser', 'misc-4.1', 'or-mlx4' and 'srp' into for-4.1Doug Ledford6-166/+391
2015-04-15infiniband/mlx4: check for mapping errorSebastian Ott2-0/+13
Since ib_dma_map_single can fail use ib_dma_mapping_error to check for errors. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/mlx4: Fix WQE LSO segment calculationErez Shitrit1-2/+1
The current code decreases from the mss size (which is the gso_size from the kernel skb) the size of the packet headers. It shouldn't do that because the mss that comes from the stack (e.g IPoIB) includes only the tcp payload without the headers. The result is indication to the HW that each packet that the HW sends is smaller than what it could be, and too many packets will be sent for big messages. An easy way to demonstrate one more aspect of the problem is by configuring the ipoib mtu to be less than 2*hlen (2*56) and then run app sending big TCP messages. This will tell the HW to send packets with giant (negative value which under unsigned arithmetics becomes a huge positive one) length and the QP moves to SQE state. Fixes: b832be1e4007 ('IB/mlx4: Add IPoIB LSO support') Reported-by: Matthew Finlay <matt@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/mlx4: Change alias guids default to be host assignedYishai Hadas1-2/+2
Change the default mode to be HOST assigned instead of SM assigned. This is the expected operational mode, because it doesn't depend on SM availability. As PF generates random GUIDs as the initial admin values, this gives out of the box experience. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/mlx4: Request alias GUID on demandYishai Hadas3-0/+75
Request GIDs from the SM on demand, i.e., when a VF actually needs them, and release them when the GIDs are no longer in use. In cloud environments, this is useful for GID migrations, in which a GID is assigned to a VF on the destination HCA, while the VF on the source HCA is shutdown (but the GID was not administratively released). Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/mlx4: Change init flow to request alias GUIDs for active VFsYishai Hadas3-79/+50
Change the init flow to ask GUIDs only for active VFs. This is done for both SM & HOST modes so that there is no need any more to maintain the ownership record type. In case SM mode is used, the initial value will be 0, ask the SM to assign, for the HOST mode the initial value will be the HOST generated GUID. This will enable out of the box experience for both probed and attached VFs. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/mlx4: Manage admin alias GUID upon admin requestYishai Hadas2-9/+15
Set the admin alias GUID per the administrator's request via the sysfs mechanism into the core layer. The "get" request returns the current value. However, if the administrator requests the SM to assign a new value by requesting 0, the SM assigned GUID is returned. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/mlx4: Alias GUID adding persistency supportYishai Hadas3-84/+245
If the SM rejects an alias GUID request the PF driver keeps trying to acquire the specified GUID indefinitely, utilizing an exponential backoff scheme. Retrying is managed per GUID entry. Each entry that wasn't applied holds its next retry information. Retry requests to the SM consist of records of 8 consecutive GUIDS. Each record that contains GUIDs requiring retries holds its next time-to-run based on the retry information of all its GUID entries. The record having the lowest retry time will run first when that retry time arrives. Since the method (SET or DELETE) as sent to the SM applies to all the GUIDs in the record, we must handle SET requests and DELETE requests in separate SM messages (one for SETs and the other for DELETEs). To avoid race conditions where a GUID entry request (set or delete) was modified after the SM request was sent, we save the method and the requested indices as part of the callback's context -- thus, only the requested indexes are evaluated when the response is received. When an GUID entry is approved we turn off its retry-required bit, this prevents redundant SM retries from occurring on that record. The port down event should be sent only when previously it was up. Likewise, the port up event should be sent only if previously the port was down. Synchronization was added around the flows that change entries and record state to prevent race conditions. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15VFS: assorted weird filesystems: d_inode() annotationsDavid Howells2-18/+18
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11infinibad: weird APIs switched to ->write_iter()Al Viro2-15/+23
Things Not To Do When Writing A Driver, part 1001st: have writev() and write() on the same file doing completely different things. As in, "interpret very different sets of commands". We _can_ handle that, but it's a bloody bad idea. Don't do that in new drivers. Ever. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-09Merge branch 'iocb' into for-davemAl Viro2-2/+0
trivial conflict in net/socket.c and non-trivial one in crypto - that one had evaded aio_complete() removal. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-02net/mlx5_core: Extend struct mlx5_interface to support multiple protocolsSaeed Mahameed1-0/+1
Preparation for ethernet driver. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Modify arm CQ in preparation for upcoming Ethernet driverSaeed Mahameed1-2/+6
Pass consumer index as a parameter to arm CQ Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Move completion eqs from mlx5_ib to mlx5_coreSaeed Mahameed3-104/+5
Preparation for ethernet driver. These functions will be used in drivers other than mlx5_ib. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02IB/mlx5: Fix Mellanox copyright noteSaeed Mahameed12-12/+12
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Clear doorbell record inside mlx5_db_alloc()Saeed Mahameed3-7/+0
Do it in one place instead of every where the function is invoked Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Coding style fixEli Cohen1-0/+1
Put a line of space before return and next statement. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Fix call to mlx5_core_qp_modifyHaggai Abramonvsky1-1/+1
Pass 0 in the sqd_event parameter. Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Add SET_PORT opcode modifiers enumerationIdo Shamay1-5/+6
The calls to SET_PORT used hard-code numbers, when supplying command's opcode modifiers, fix that to use well defined constants. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-25fs: move struct kiocb to fs.hChristoph Hellwig2-2/+0
struct kiocb now is a generic I/O container, so move it to fs.h. Also do a #include diet for aio.h while we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18IB/mlx4: Saturate RoCE port PMA counters in case of overflowMajd Dibbiny1-4/+16
For RoCE ports, we set the u32 PMA values based on u64 HCA counters. In case of overflow, according to the IB spec, we have to saturate a counter to its max value, do that. Fixes: c37791349cc7 ('IB/mlx4: Support PMA counters for IBoE') Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18IB/mlx4: Verify net device validity on port change eventMoni Shoua1-1/+5
Processing an event is done in a different context from the one when the event was dispatched. This requires a check that the slave net device is still valid when the event is being processed. The check is done under the iboe lock which ensure correctness. Fixes: a57500903093 ('IB/mlx4: Add port aggregation support') Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22Merge branch 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-2/+2
Pull more vfs updates from Al Viro: "Assorted stuff from this cycle. The big ones here are multilayer overlayfs from Miklos and beginning of sorting ->d_inode accesses out from David" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits) autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation procfs: fix race between symlink removals and traversals debugfs: leave freeing a symlink body until inode eviction Documentation/filesystems/Locking: ->get_sb() is long gone trylock_super(): replacement for grab_super_passive() fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) SELinux: Use d_is_positive() rather than testing dentry->d_inode Smack: Use d_is_positive() rather than testing dentry->d_inode TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR() Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb VFS: Split DCACHE_FILE_TYPE into regular and special types VFS: Add a fallthrough flag for marking virtual dentries VFS: Add a whiteout dentry type VFS: Introduce inode-getting helpers for layered/unioned fs environments Infiniband: Fix potential NULL d_inode dereference posix_acl: fix reference leaks in posix_acl_create autofs4: Wrong format for printing dentry ...
2015-02-21Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds52-491/+1035
Pull InfiniBand/RDMA updates from Roland Dreier: - Re-enable on-demand paging changes with stable ABI - Fairly large set of ocrdma HW driver fixes - Some qib HW driver fixes - Other miscellaneous changes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (43 commits) IB/qib: Add blank line after declaration IB/qib: Fix checkpatch warnings IB/mlx5: Enable the ODP capability query verb IB/core: Add on demand paging caps to ib_uverbs_ex_query_device IB/core: Add support for extended query device caps RDMA/cxgb4: Don't hang threads forever waiting on WR replies RDMA/ocrdma: Fix off by one in ocrdma_query_gid() RDMA/ocrdma: Use unsigned for bit index RDMA/ocrdma: Help gcc generate better code for ocrdma_srq_toggle_bit RDMA/ocrdma: Update the ocrdma module version string RDMA/ocrdma: set vlan present bit for user AH RDMA/ocrdma: remove reference of ocrdma_dev out of ocrdma_qp structure RDMA/ocrdma: Add support for interrupt moderation RDMA/ocrdma: Honor return value of ocrdma_resolve_dmac RDMA/ocrdma: Allow expansion of the SQ CQEs via buddy CQ expansion of the QP RDMA/ocrdma: Discontinue support of RDMA-READ-WITH-INVALIDATE RDMA/ocrdma: Host crash on destroying device resources RDMA/ocrdma: Report correct state in ibv_query_qp RDMA/ocrdma: Debugfs enhancments for ocrdma driver RDMA/ocrdma: Report correct count of interrupt vectors while registering ocrdma device ...
2015-02-20Merge branches 'core', 'cxgb4', 'iser', 'mlx4', 'mlx5', 'ocrdma', 'odp', 'qib' and 'srp' into for-nextRoland Dreier52-490/+1035
2015-02-20IB/qib: Add blank line after declarationMike Marciniszyn17-6/+67
Upstream checkpatch now requires this. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-20IB/qib: Fix checkpatch warningsMike Marciniszyn15-44/+42
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-20Infiniband: Fix potential NULL d_inode dereferenceDavid Howells2-2/+2
Code that does this: if (!(d_unhashed(tmp) && tmp->d_inode)) { ... simple_unlink(parent->d_inode, tmp); } is broken because: !(d_unhashed(tmp) && tmp->d_inode) is equivalent to: !d_unhashed(tmp) || !tmp->d_inode so it is possible to get into simple_unlink() with tmp->d_inode == NULL. simple_unlink(), however, assumes tmp->d_inode cannot be NULL. I think that what was meant is this: !d_unhashed(tmp) && tmp->d_inode and that the logical-not operator or the final close-bracket was misplaced. Signed-off-by: David Howells <dhowells@redhat.com> cc: Bryan O'Sullivan <bos@pathscale.com> cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-18IB/mlx5: Enable the ODP capability query verbHaggai Eran1-0/+2
Re-enable the on-demand paging capability query through the extended query device verb. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Reviewed-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/cxgb4: Don't hang threads forever waiting on WR repliesHariprasad S1-15/+14
In c4iw_wait_for_reply(), if a FW6_MSG WR reply is not received after C4IW_WR_TO seconds, fail the WR operation and mark the device as fatally dead. Further, if the device is marked fatally dead, then fail the WR wait immediately. Also change the timeout to 60 seconds. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Fix off by one in ocrdma_query_gid()Dan Carpenter1-1/+1
The ->sgid_tbl[] array has OCRDMA_MAX_SGID number of elements so this test is off by one. ->sgid_tbl is allocated in ocrdma_alloc_resources(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.