aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-07-14IB/core: Destroy ocrdma_dev_id IDR on module exitJohannes Thumshirn1-0/+1
Destroy ocrdma_dev_id IDR on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Optimize do_slave_initDoug Ledford1-7/+9
There is little chance our memory allocation will fail, so we can combine initializing the work structs with allocating them instead of looping through all of them once to allocate and again to initialize. Then when we need to actually find out if our device is up or in the process of going down, have all of our work structs batched up, take the spin_lock once and only once, and do all of the batch under the one spin_lock invocation instead of incurring all of the locked memory cycles we would otherwise incur to take/release the spin_lock over and over again. Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Fix memory leak in do_slave_initDoug Ledford1-0/+2
We create a number of work structs to be queued up to a workqueue, and on completion of the workqueue handler, the workqueue handler frees the allocated memory. If, however, we don't queue the work struct because the device is going down, then we need to free the memory ourselves. Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Optimize freeing of items on error unwindManinder Singh1-5/+3
On failure, we loop through all possible pointers and test them before calling kfree. But really, why even attempt to free items we didn't allocate when we can easily loop through exactly and only the devices for which the original memory allocation succeeded and free just those. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Fix use of flow-counters for process_madOr Gerlitz1-10/+19
For IB links, reading HCA flow counters through iboe_process_mad() should be used when mlx4_ib_process_mad() is invoked only for VFs PMA queries and exactly nothing else. Fixes: 7193a141eb74 ('IB/mlx4: Set VF to read from QP counters') Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ipath: Convert use of __constant_<foo> to <foo>Vaishali Thakkar1-2/+2
In little endian cases, the macros be16_to_cpu and cpu_to_be64 unfolds to __swab{16,64} which provides special case for constants. In big endian cases, __constant_be16_to_cpu and be16_to_cpu expand directly to the same expression. The same applies for __constant_cpu_to_be64 and cpu_to_be64. So, replace __constant_be16_to_cpu with be16_to_cpu and __constant_cpu_to_be64 with cpu_to_be64, with the goal of getting rid of the definition of __constant_be16_to_cpu and __constant_cpu_to_be64 completely. Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14RDMA/nes: Fix for incorrect recording of the MAC addressTatyana Nikolova1-1/+1
Fix for incorrect recording of the MAC address Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14RDMA/nes: Fix for resolving the neighTatyana Nikolova1-2/+3
Neighbor resolution doesn't work without this fix Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Do not attemp to report HCA clock offset on VFsMatan Barak1-5/+6
mlx4 VFs can provide CQE raw time-stamping services, but they don't have the hca core clock mapped to their PCI bars. As such, we should not attempt to query and report the clock offset to user space for VFs. Doing so causes query_device over VFs to fail with -ENOSUPP. Fixes: 4b664c4355b2 ('IB/mlx4: Add support for CQ time-stamping') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mad: Remove improper use of BUG_ONIra Weiny7-14/+21
We recently added BUG_ON's which were inappropriate for a condition which should never happen. Change these to be WARN_ON_ONCE as a debugging aid. Fixes: 4cd7c9479aff ('IB/mad: Add support for additional MAD info to/from drivers') Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-04Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-2/+2
Pull more vfs updates from Al Viro: "Assorted VFS fixes and related cleanups (IMO the most interesting in that part are f_path-related things and Eric's descriptor-related stuff). UFS regression fixes (it got broken last cycle). 9P fixes. fs-cache series, DAX patches, Jan's file_remove_suid() work" [ I'd say this is much more than "fixes and related cleanups". The file_table locking rule change by Eric Dumazet is a rather big and fundamental update even if the patch isn't huge. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits) 9p: cope with bogus responses from server in p9_client_{read,write} p9_client_write(): avoid double p9_free_req() 9p: forgetting to cancel request on interrupted zero-copy RPC dax: bdev_direct_access() may sleep block: Add support for DAX reads/writes to block devices dax: Use copy_from_iter_nocache dax: Add block size note to documentation fs/file.c: __fget() and dup2() atomicity rules fs/file.c: don't acquire files->file_lock in fd_install() fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation vfs: avoid creation of inode number 0 in get_next_ino namei: make set_root_rcu() return void make simple_positive() public ufs: use dir_pages instead of ufs_dir_pages() pagemap.h: move dir_pages() over there remove the pointless include of lglock.h fs: cleanup slight list_entry abuse xfs: Correctly lock inode when removing suid and file capabilities fs: Call security_ops->inode_killpriv on truncate fs: Provide function telling whether file_remove_privs() will do anything ...
2015-06-30IB/ehca: use kvfree() in ipz_queue_{cd}tor()Pekka Enberg1-8/+2
Use kvfree() instead of open-coding it. Signed-off-by: Pekka Enberg <penberg@kernel.org> Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds15-428/+902
Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
2015-06-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds48-235/+786
Pull rdma updates from Doug Ledford: - a large cleanup of how device capabilities are checked for various features - additional cleanups in the MAD processing - update to the srp driver - creation and use of centralized log message helpers - add const to a number of args to calls and clean up call chain - add support for extended cq create verb - add support for timestamps on cq completion - add support for processing OPA MAD packets * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (92 commits) IB/mad: Add final OPA MAD processing IB/mad: Add partial Intel OPA MAD support IB/mad: Add partial Intel OPA MAD support IB/core: Add OPA MAD core capability flag IB/mad: Add support for additional MAD info to/from drivers IB/mad: Convert allocations from kmem_cache to kzalloc IB/core: Add ability for drivers to report an alternate MAD size. IB/mad: Support alternate Base Versions when creating MADs IB/mad: Create a generic helper for DR forwarding checks IB/mad: Create a generic helper for DR SMP Recv processing IB/mad: Create a generic helper for DR SMP Send processing IB/mad: Split IB SMI handling from MAD Recv handler IB/mad cleanup: Generalize processing of MAD data IB/mad cleanup: Clean up function params -- find_mad_agent IB/mlx4: Add support for CQ time-stamping IB/mlx4: Add mmap call to map the hardware clock IB/core: Pass hardware specific data in query_device IB/core: Add timestamp_mask and hca_core_clock to query_device IB/core: Extend ib_uverbs_create_cq IB/core: Add CQ creation time-stamping flag ...
2015-06-23make simple_positive() publicAl Viro2-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-06-18x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabledLuis R. Rodriguez4-42/+26
We are burrying direct access to MTRR code support on x86 in order to take advantage of PAT. In the future, we also want to make the default behaviour of ioremap_nocache() to use strong UC, use of mtrr_add() on those systems would make write-combining void. In order to help both enable us to later make strong UC default and in order to phase out direct MTRR access code port the driver over to arch_phys_wc_add() and annotate that the device driver requires systems to boot with PAT disabled, with the 'nopat' kernel parameter. This is a workable compromise given that the ipath device driver powers the old HTX bus cards that only work in AMD systems, while the newer IB/qib device driver powers all PCI-e cards. The ipath device driver is obsolete, hardware is hard to find and because of this its a reasonable compromise to require users of ipath to boot with 'nopat'. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Doug Ledford <dledford@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Ville Syrjälä <syrjala@sci.fi> Cc: infinipath@intel.com Cc: jbeulich@suse.com Cc: konrad.wilk@oracle.com Cc: linux-rdma@vger.kernel.org Cc: mchehab@osg.samsung.com Cc: toshi.kani@hp.com Link: http://lkml.kernel.org/r/1434053994-2196-4-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1434356898-25135-5-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-15net/mlx4_core: Add helper to query countersEran Ben Elisha1-24/+8
This is an infrastructure step for querying VF and PF counters. This code was in the IB driver, move it to the mlx4 core driver so it will be accessible for more use cases. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15IB/mlx4: Set VF to read from QP countersEran Ben Elisha1-2/+4
As IB VFs are not capable to read the port counters through MADs, move there to read their own QP counters to gather statistics. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15IB/mlx4: Add RoCE/IB dedicated countersEran Ben Elisha4-17/+39
This is an infrastructure step to attach all the QPs opened from the IB driver to a counter in order to collect VF stats from the PF using those counters. If the port's type is Ethernet, the counter policy demands two counters per port (one for RoCE and one for Ethernet). The port default counter (allocated in mlx4_core) is used for the Ethernet netdev QPs and we allocate another counter for RoCE. If the port's traffic is Infiniband, the counter policy demands one counter per port, so it can use the port's default counter. Also, Add 'allocated' flag for each counter in order to clean it at unload. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15net/mlx4_core: Add sink counterEran Ben Elisha1-1/+2
Reserve the last valid counter index for "sink" counter, when a new counter cannot be allocated, the driver will use this counter. In order to avoid allocating this counter on any other flow, fix the indices bitmap allocation range, and reserve the sink counter index. Add macro for the sink counter index and replace all appearences of the index with the macro. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12IB/mad: Add support for additional MAD info to/from driversIra Weiny18-22/+96
In order to support alternate sized MADs (and variable sized MADs on OPA devices) add in/out MAD size parameters to the process_mad core call. In addition, add an out_mad_pkey_index to communicate the pkey index the driver wishes the MAD stack to use when sending OPA MAD responses. The out MAD size and the out MAD PKey index are required by the MAD stack to generate responses on OPA devices. Furthermore, the in and out MAD parameters are made generic by specifying them as ib_mad_hdr rather than ib_mad. Drivers are modified as needed and are protected by BUG_ON flags if the MAD sizes passed to them is incorrect. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/core: Add ability for drivers to report an alternate MAD size.Ira Weiny7-0/+10
Add max MAD size to the device immutable data set and have all drivers that support MADs report the current IB MAD size (IB_MGMT_MAD_SIZE) to the core. Verify MAD size data in both the MAD core and when reading the immutable data. OPA drivers will report alternate MAD sizes in subsequent patches. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mad: Support alternate Base Versions when creating MADsIra Weiny4-4/+8
In preparation to support the new OPA MAD Base version, add a base version parameter to ib_create_send_mad and set it to IB_MGMT_BASE_VERSION for current users. Definition of the new base version and it's processing will occur in later patches. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mlx4: Add support for CQ time-stampingMatan Barak3-5/+62
This includes: * support allocation of CQ with the TIMESTAMP_COMPLETION creation flag. * add timestamp_mask and hca_core_clock to query_device, reporting the number of supported timestamp bits (mask) and the hca_core_clock frequency. * return hca core clock's offset in query_device vendor's data, this is needed in order to read the HCA's core clock. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/mlx4: Add mmap call to map the hardware clockMatan Barak1-1/+17
In order to read the HCA's cycle counter efficiently in user space, we need to map the HCA's register. This is done through mmap call. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/core: Pass hardware specific data in query_deviceMatan Barak15-22/+69
Vendors should be able to pass vendor specific data to/from user-space via query_device uverb. In order to do this, we need to pass the vendors' specific udata. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/core: Change ib_create_cq to use struct ib_cq_init_attrMatan Barak4-5/+14
Currently, ib_create_cq uses cqe and comp_vecotr instead of the extendible ib_cq_init_attr struct. Earlier patches already changed the vendors to work with ib_cq_init_attr. This patch changes the consumers too. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-12IB/core: Change provider's API of create_cq to be extendibleMatan Barak21-41/+110
Add a new ib_cq_init_attr structure which contains the previous cqe (minimum number of CQ entries) and comp_vector (completion vector) in addition to a new flags field. All vendors' create_cq callbacks are changed in order to work with the new API. This commit does not change any functionality. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> to patch #2 Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-11net/mlx5e: Fix HW MTU settingsSaeed Mahameed1-6/+2
Previously we configured HW MTU to be netdev->mtu, actually we need to configure netdev->mtu + (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN). Also, query MTU can not fail, hence make the relevant helper a void functionm, add mlx5e_set_dev_port_mtu, helper function to handle MTU setting. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11iw_cxgb4: support for bar2 qid densities exceeding the page sizeHariprasad S5-69/+98
Handle this configuration: Queues Per Page * SGE BAR2 Queue Register Area Size > Page Size Use cxgb4_bar2_sge_qregs() to obtain the proper location within the bar2 region for a given qid. Rework the DB and GTS write functions to make use of this bar2 info. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-11Merge branch 'for-4.2-misc' into k.o/for-4.2Doug Ledford3-11/+5
2015-06-11RDMA/ocrdma: fix double free on pdColin Ian King1-1/+0
A reorganisation of the PD allocation and deallocation in commit 9ba1377daa ("RDMA/ocrdma: Move PD resource management to driver.") introduced a double free on pd, as detected by static analysis by smatch: drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:682 ocrdma_alloc_pd() error: double free of 'pd'^ The original call to ocrdma_mbx_dealloc_pd() (which does not kfree pd) was replaced with a call to _ocrdma_dealloc_pd() (which does kfree pd). The kfree following this call causes the double free, so just remove it to fix the problem. Fixes: 9ba1377daa ("RDMA/ocrdma: Move PD resource management to driver.") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-By: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-11IB/usnic: clean up some error handling codeDan Carpenter1-4/+3
This code causes a static checker warning: drivers/infiniband/hw/usnic/usnic_uiom.c:476 usnic_uiom_alloc_pd() warn: passing zero to 'PTR_ERR' This code isn't buggy, but iommu_domain_alloc() doesn't return an error pointer so we can simplify the error handling and silence the static checker warning. The static checker warning is to catch place which do: if (!ptr) return ERR_PTR(ptr); Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dave Goodell <dgoodell@cisco.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-11IB/mthca: use swap() in mthca_make_profile()Fabian Frederick1-6/+2
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-04mlx5: Enable mutual support for IB and EthernetHaggai Abramonvsky3-1/+25
Ethernet functionality is only available when working in ISSI > 0 mode. Previously, the IB driver wasn't ready to work on that mode, and hence building both the IB driver and the Ethernet functionality in the core driver were disallowed by Kconfigs. Now, once we have all the pre-steps in place, we can remove this limitation. The last steps in the IB driver for getting that setup to work are: create dummy SRQ for the driver's use (until now we could use XRC_SRQ as SRQ and XRC_SRQ, after moving to ISSI > 0, we separate XRC SRQs from basic SRQs) and adapt the create QP function to be compatible with ISSI > 0. Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04IB/mlx5: Don't create IB instance over Ethernet portsMajd Dibbiny1-0/+4
Since we still don't have RoCE support in mlx5, avoid creating IB driver instance over Ethernet ports. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 modeMajd Dibbiny3-173/+657
In ISSI > 0 mode, most of the MAD_IFC command features are deprecated, and can't be used. Therefore, when in that mode, we replace all of them with other commands that provide the required functionality. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04net/mlx5_core: Enable XRCs and SRQs when using ISSI > 0Haggai Abramonvsky1-1/+1
When working in ISSI > 0 mode, the model exposed by the device for XRCs and SRQs is different. XRCs use XRC SRQs and plain SRQs are based on RPM (Receive Memory Pool). Add helper functions to create, modify, query, and arm XRC SRQs and RMPs. Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-03cxgb4: Add ethtool support to get adapter statsHariprasad Shenai1-4/+4
Add ethtool support to get adapter specific hardware statistics Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02Merge branch 'for-4.2-misc' into k.o/for-4.2Doug Ledford4-3/+18
2015-06-02IB/core cleanup: Add const on args - device->process_madIra Weiny20-73/+75
The process_mad device function declares some parameters as "in". Make those parameters const and adjust the call tree under process_mad in the various drivers accordingly. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02IB/mlx4: Fix error paths in mlx4_ib_create_flow()Roland Dreier1-2/+3
The unwinding clean up code are err_create_flow starts at the current index i. That means we shouldn't increment i until we're really sure we won't have to destroy the current flow; otherwise we might increment the index, fail inside an is_bonded block, and end up accessing off the end of the reg_id[] array. This was detected by Coverity (CID 1271229). Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02RDMA/ocrdma: Fix memory leak in _ocrdma_alloc_pd()Roland Dreier1-1/+6
If ocrdma_get_pd_num() fails, then we need to free the pd struct we allocated. This was detected by Coverity (CID 1271245). Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-By: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-06-02RDMA/nes: Enable the use of the tos field in the nes driverFaisal Latif2-0/+9
RDMA/nes: Enable the use of the tos field in the nes driver Signed-off-by: Faisal Latif <Faisal.Latif@intel.com> Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-30net/mlx4: Add EQ poolMatan Barak2-49/+23
Previously, mlx4_en allocated EQs and used them exclusively. This affected RoCE performance, as applications which are events sensitive were limited to use only the legacy EQs. Change that by introducing an EQ pool. This pool is managed by mlx4_core. EQs are assigned to ports (when there are limited number of EQs, multiple ports could be assigned to the same EQs). An exception to this rule is the ASYNC EQ which handles various events. Legacy EQs are completely removed as all EQs could be shared. When a consumer (mlx4_ib/mlx4_en) requests an EQ, it asks for EQ serving on a specific port. The core driver calculates which EQ should be assigned to that request. Because IRQs are shared between IB and Ethernet modules, their names only include the PCI device BDF address. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx4_core: Demote simple multicast and broadcast flow steering rulesMatan Barak1-2/+2
In SRIOV, when simple (i.e - Ethernet L2 only) flow steering rules are created, always create them at MLX4_DOMAIN_NIC priority (instead of the real priority the function created them at). This is done in order to let multiple functions add broadcast/multicast rules without affecting other functions, which is necessary for DPDK in SRIOV. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionalityAmir Vadai1-3/+1
This is the Ethernet part of the driver for the Mellanox ConnectX(R)-4 Single/Dual-Port Adapter supporting 100Gb/s with VPI. The driver extends the existing mlx5 driver with Ethernet functionality. This patch contains the driver entry points but does not include transmit and receive (see the previous patch in the series) routines. It also adds the option MLX5_CORE_EN to Kconfig to enable/disable the Ethernet functionality. Currently, Kconfig is programmed to make Ethernet and Infiniband functionality mutally exclusive. Also changed MLX5_INFINIBAND to be depandant on MLX5_CORE instead of selecting it, since MLX5_CORE could be selected without MLX5_INFINIBAND being selected. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx5_core: New device capabilities handlingSaeed Mahameed8-146/+124
- Query all supported types of dev caps on driver load. - Store the Cap data outbox per cap type into driver private data. - Introduce new Macros to access/dump stored caps (using the auto generated data types). - Obsolete SW representation of dev caps (no need for SW copy for each cap). - Modify IB driver to use new macros for checking caps. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30net/mlx5_core,mlx5_ib: Do not use vmap() on coherent memoryAmir Vadai3-4/+3
As David Daney pointed in mlx4_core driver [1], mlx5_core is also misusing the DMA-API. This patch is removing the code that vmap() memory allocated by dma_alloc_coherent(). After this patch, users of this drivers might fail allocating resources on memory fragmeneted systems. This will be fixed later on. [1] - https://patchwork.ozlabs.org/patch/458531/ CC: David Daney <david.daney@cavium.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-24net/mlx4_core: Modify port values when generting EQEs for VFsOr Gerlitz1-1/+6
As part of enabling single ported VFs over IB ports we need to handle some of the flows for generting EQ events for VFs which don't come into play under Eth ports. This mainly includes port management events derived from changes of the phyiscal port (lid change, client re-register, down/up, etc), VF pkey table changes and VF guid changes initiated by the IB driver. (1) make sure that events are generated only for VFs sitting on the relevant physical port (under the ALL_SLAVES flow). (2) before generating the event, convert from physical (one or two) to VF port (always equals one). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.