aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/sw/rdmavt/qp.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-10-18Merge branch 'hfi1' into k.o/for-nextDoug Ledford1-1/+1
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18IB/rdmavt: Don't wait for resources in QP resetAlex Estrin1-1/+1
Per the IBTA spec, QP destroy shall fail if the QP is attached to multicast groups, although the spec is silent on modify_qp to reset state. It implies that ULP must deregister QP from all mcast groups for destroy to succeed. The faulty patch "IB/ipoib: Update broadcast object if PKey value was changed in index 0" exposed two issues in rdmavt: 1. Rvt QP reset waits for qp references to go to zero. This will hang if QP is attached to multicast groups. 2. The mcast group detach will fail for a QP in reset state therefore preventing ULP from correcting the issue. This patch moves the reference count wait to the the destroy QP path and allows a QP mcast detach to work in the reset state. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-14RDMA/rdmavt: Suppress gcc 7 fall-through complaintsBart Van Assche1-0/+1
Avoid that gcc 7 reports the following warning when building with W=1: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-28IB/rdmavt: Handle dereg of inuse MRs properlyMike Marciniszyn1-4/+108
A destroy of an MR prior to destroying the QP can cause the following diagnostic if the QP is referencing the MR being de-registered: hfi1 0000:05:00.0: hfi1_0: rvt_dereg_mr timeout mr ffff8808562108 00 pd ffff880859b20b00 The solution is to when the a non-zero refcount is encountered when the MR is destroyed the QPs needs to be iterated looking for QPs in the same PD as the MR. If rvt_qp_mr_clean() detects any such QP references the rkey/lkey, the QP needs to be put into an error state via a call to rvt_qp_error() which will trigger the clean up of any stuck references. This solution is as specified in IBTA 1.3 Volume 1 11.2.10.5. [This is reproduced with the 0.4.9 version of qperf and the rc_bw test] Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-28IB/rdmavt: Add QP iterator API for QPsMike Marciniszyn1-0/+144
There are currently 3 spots in the qib and hfi1 driver that have knowledge of the internal QP hash list that should only be in scope to rdmavt QP code. Add an iterator API for processing all QPs to hide the nature of the RCU hashlist. The API consists of: - rvt_qp_iter_init() * For iterating QPs one at a time for seq_file semantics - rvt_qp_iter_next() * For iterating QPs one at a time for seq_file semantics - rvt_qp_iter() * For iterating all QPs The first two are used for things like seq_file prints. The last is for code that just needs to iterate all QPs in the system. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-28IB/rdmavt: Use rvt_put_swqe() in rvt_clear_mr_ref()Mike Marciniszyn1-5/+1
hfi1 and qib were converted in previous patches, do the same for rdmavt. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-22IB/rdmavt, hfi1, qib: Modify check_ah() to account for extended LIDsDon Hiatt1-6/+23
rvt_check_ah() delegates lid verification to underlying driver. Underlying driver uses different conditions to check for dlid depending on whether the device supports extended LIDs Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-22IB/hfi1: Remove pmtu from the QP structureSebastian Sanchez1-2/+1
The pmtu field doens't have be stored in the QP structure as it can easily be calculated when needed. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-31IB/{rdmavt, hfi1, qib}: Fix panic with post receive and SGE compressionMike Marciniszyn1-9/+7
The server side of qperf panics as follows: [242446.336860] IP: report_bug+0x64/0x10 [242446.341031] PGD 1c0c067 [242446.341032] P4D 1c0c067 [242446.343951] PUD 1c0d063 [242446.346870] PMD 8587ea067 [242446.349788] PTE 800000083e14016 [242446.352901] [242446.358352] Oops: 0003 [#1] SM [242446.437919] CPU: 1 PID: 7442 Comm: irq/92-hfi1_0 k Not tainted 4.12.0-mam-asm #1 [242446.446365] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/201 [242446.458397] task: ffff8808392d2b80 task.stack: ffffc9000664000 [242446.465097] RIP: 0010:report_bug+0x64/0x10 [242446.469859] RSP: 0018:ffffc900066439c0 EFLAGS: 0001000 [242446.475784] RAX: ffffffffa06647e4 RBX: ffffffffa06461e1 RCX: 000000000000000 [242446.483840] RDX: 0000000000000907 RSI: ffffffffa0675040 RDI: ffffffffffff740 [242446.491897] RBP: ffffc900066439e0 R08: 0000000000000001 R09: 000000000000025 [242446.499953] R10: ffffffff81a253df R11: 0000000000000133 R12: ffffc90006643b3 [242446.508010] R13: ffffffffa065bbf0 R14: 00000000000001e5 R15: 000000000000000 [242446.516067] FS: 0000000000000000(0000) GS:ffff88085f640000(0000) knlGS:000000000000000 [242446.525191] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003 [242446.531698] CR2: ffffffffa06647ee CR3: 0000000001c09000 CR4: 00000000001406e [242446.539756] Call Trace [242446.542582] fixup_bug+0x2c/0x5 [242446.546277] do_trap+0x12b/0x18 [242446.549972] do_error_trap+0x89/0x11 [242446.554171] ? hfi1_copy_sge+0x271/0x2b0 [hfi1 [242446.559324] ? ttwu_do_wakeup+0x1e/0x14 [242446.563795] ? ttwu_do_activate+0x77/0x8 [242446.568363] do_invalid_op+0x20/0x3 [242446.572448] invalid_op+0x1e/0x3 [242446.576247] RIP: 0010:hfi1_copy_sge+0x271/0x2b0 [hfi1 [242446.582075] RSP: 0018:ffffc90006643be8 EFLAGS: 0001004 [242446.587999] RAX: 0000000000000000 RBX: ffff88083e0fa240 RCX: 000000000000000 [242446.596058] RDX: 0000000000000000 RSI: ffff880842508000 RDI: ffff88083e0fa24 [242446.604116] RBP: ffffc90006643c28 R08: 0000000000000000 R09: 000000000000000 [242446.612172] R10: ffffc90009473640 R11: 0000000000000133 R12: 000000000000000 [242446.620228] R13: 0000000000000000 R14: 0000000000002000 R15: ffff88084250800 [242446.628293] ? hfi1_copy_sge+0x1a1/0x2b0 [hfi1 [242446.633449] hfi1_rc_rcv+0x3da/0x1270 [hfi1 [242446.638312] ? sc_buffer_alloc+0x113/0x150 [hfi1 [242446.643662] hfi1_ib_rcv+0x1c9/0x2e0 [hfi1 [242446.648428] process_receive_ib+0x19a/0x270 [hfi1 [242446.653866] ? process_rcv_qp_work+0xd2/0x160 [hfi1 [242446.659505] handle_receive_interrupt_nodma_rtail+0x184/0x2e0 [hfi1 [242446.666693] ? irq_finalize_oneshot+0x100/0x10 [242446.671846] receive_context_thread+0x1b/0x140 [hfi1 [242446.677576] irq_thread_fn+0x1e/0x4 [242446.681659] irq_thread+0x13c/0x1b [242446.685646] ? irq_forced_thread_fn+0x60/0x6 [242446.690604] kthread+0x112/0x15 [242446.694298] ? irq_thread_check_affinity+0xe0/0xe [242446.699738] ? kthread_park+0x60/0x6 [242446.703919] ? do_syscall_64+0x67/0x15 [242446.708292] ret_from_fork+0x25/0x3 [242446.712374] Code: 63 78 04 44 0f b7 70 08 41 89 d0 4c 8d 2c 38 41 83 e0 01 f6 c2 02 74 17 66 45 85 c0 74 11 f6 c2 04 b9 01 00 00 00 75 bb 83 ca 04 <66> 89 50 0a 66 45 85 c0 74 52 0f b6 48 0b 41 0f b7 f6 4d 89 e0 [242446.733527] RIP: report_bug+0x64/0x100 RSP: ffffc900066439c [242446.739935] CR2: ffffffffa06647e [242446.743763] ---[ end trace 0e90a20d0aa494f7 ]-- The root cause is that the qib/hfi1 post receive call to rvt_lkey_ok() doesn't interpret the new return value from rvt_lkey_ok() properly leading to an mr reference count underrun. Additionally, remove an unused argument in rvt_sge_adjacent() aw well as an unneeded incr local in rvt_post_one_wr(). Fixes: Commit 14fe13fcd3af ("IB/rdmavt: Compress adjacent SGEs in rvt_lkey_ok()") Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-24Merge branch 'hfi1' into k.o/for-4.14Doug Ledford1-33/+27
2017-07-20IB/rdmavt: Setting of QP timeout can overflow jiffies computationKaike Wan1-3/+1
Current computation of qp->timeout_jiffies in rvt_modify_qp() will cause overflow due to the fact that the input to the function usecs_to_jiffies is only 32-bit ( unsigned int). Overflow will occur when attr->timeout is equal to or greater than 30. The consequence is unnecessarily excessive retry and thus degradation of the system performance. This patch fixes the problem by limiting the input to 5-bit and calling usecs_to_jiffies() before multiplying the scaling factor. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-17IB/{rdmavt, qib, hfi1}: Remove gfp flags argumentLeon Romanovsky1-35/+13
The caller to the driver marks GFP_NOIO allocations with help of memalloc_noio-* calls now. This makes redundant to pass down to the driver gfp flags, which can be GFP_KERNEL only. The patch removes the gfp flags argument and updates all driver paths. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Use QPN mask to avoid overflowDennis Dalessandro1-1/+1
Ensure we can't come up with an array size that is bigger than the array by applying the QPN mask before the divide in the free_qpn function. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/rdmavt: Remove duplicated functionsDennis Dalessandro1-23/+14
The free_qpn() function from the hfi1/qib driver which was the basis for rdmavt_free_qpn() function was accidentally left in the code. Remove it. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/rdmavt: Compress adjacent SGEs in rvt_lkey_ok()Mike Marciniszyn1-10/+13
SGEs that are contiguous needlessly consume driver dependent TX resources. The lkey validation logic is enhanced to compress the SGE that ends up in the send wqe when consecutive addresses are detected. The lkey validation API used to return 1 (success) or 0 (fail). The return value is now an -errno, 0 (compressed), or 1 (uncompressed). A additional argument is added to pass the last SQE for the compression. Loopback callers always pass a NULL to last_sge since the optimization is of little benefit in that situation. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Use rdma_ah_attr accessor functionsDasaratharaman Chandramouli1-5/+7
Modify core and driver components to use accessor functions introduced to access individual fields of rdma_ah_attr Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-05IB/rdmavt: Avoid reseting wqe send_flags in unreserveMike Marciniszyn1-2/+5
The wqe should be read only and in fact the superfluous reset of the RVT_SEND_RESERVE_USED flag causes an issue where reserved operations elicit a bad completion to the ULP. The maintenance of the flag is now entirely within rvt_post_one_wr() where a reserved operation will set the flag and a non-reserved operation will insure the operation that is about to be posted has the flag reset. Fixes: Commit 856cc4c237ad ("IB/hfi1: Add the capability for reserved operations") Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-05IB/rdmavt, IB/hfi1: Fix timer migration regressionsSebastian Sanchez1-1/+5
RC timeout counter isn't getting incremented. Increment counter and add the trace for it. Fixes: 87c23b4ab018 ("IB/rdmavt: Adding timer logic to rdmavt") Reviewed-by: Brian Welty <brian.welty@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-05IB/rdmavt: Add additional fields to post send traceMike Marciniszyn1-1/+1
This fix is to get additional debugging information. The following fields are added: - wqe - qpt - num_sge - ssn - pid - send_flags These additional fields provide for more focused filtering and triggering. The patch also moves the trace to just before the wqe is posted to get the most accurate information and future proofs the code to trace all possible reserved opcodes. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-05IB/rdmavt, IB/hfi1, IB/qib: Make wc opcode translation driver dependentMike Marciniszyn1-17/+0
The work to create a completion helper moved the translation of send wqe operations to completion opcodes to rdmvat. This precludes having driver dependent operations. Make the translation driver dependent by doing the translation in the driver prior to the rvt_qp_swqe_complete() call using restored translation tables. Fixes: Commit f2dc9cdce83c ("IB/rdmavt: Add a send completion helper") Fixes: Commit 0771da5a6e9d ("IB/hfi1,IB/qib: Use new send completion helper") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1, qib, rdmavt: Move AETH defines to rdma/ib_hdrs.hDon Hiatt1-3/+4
Rename RVT AETH defines and export in rdma/ib_hdrs.h Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Add rvt_rnr_tbl_to_usec functionDon Hiatt1-0/+11
Return usec from an index into ib_rvt_rnr_table. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/rdmavt: Adding timer logic to rdmavtVenkata Sandeep Dhanalakota1-2/+181
To move common code across target to rdmavt for code reuse. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1, qib, rdmavt: Move two IB event functions into rdmavtBrian Welty1-0/+38
Add rvt_rc_error() and rvt_comm_est() as shared functions in rdmavt, moved from hfi1/qib logic. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14IB/rdmavt: Only put mmap_info ref if it existsJim Foraker1-1/+2
rvt_create_qp() creates qp->ip only when a qp creation request comes from userspace (udata is not NULL). If we exceed the number of available queue pairs however, the error path always attempts to put a kref to this structure. If the requestor is inside the kernel, this leads to a crash. We fix this by checking that qp->ip is not NULL before caling kref_put(). Signed-off-by: Jim Foraker <foraker1@llnl.gov> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-11IB/rdmavt: Add a send completion helperMike Marciniszyn1-0/+17
This is for use by client drivers to drive send completions into a CQ. A new exported table allows for the mapping of ib_wr_opcode into a ib_wc_opcode. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-03IB/rdmavt: Trivial function comment corrected.Parav Pandit1-1/+1
Corrected function name in comment from qib_ to rvt_. Signed-off-by: Parav Pandit <pandit.parav@gmail.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/rdmavt, IB/hfi1: Add lockdep asserts for lock debugMike Marciniszyn1-0/+8
This patch adds lockdep asserts in key code paths for insuring lock correctness. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/rdmavt: Add qp init functionMike Marciniszyn1-42/+58
Add an rvt_qp_init() to initialize specific common fields as the qp is created or reset. The routine is shared by the rvt_reset_qp() and the rvt_create_qp(). The intent is that lock dep assertions will only appear in the rvt_reset_qp(). Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/rdmavt: Move reset calldown to reset pathMike Marciniszyn1-6/+5
The reset calldown is misplaced. It should only be called in the code that actually transitions the QP to reset. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/rdmavt: Correct sparse annotationMike Marciniszyn1-6/+3
The __must_hold() is sufficent to correct the sparse context imbalance inside a function. Per Documentation/sparse.txt: __must_hold - The specified lock is held on function entry and exit. Fixes: Commit c0a67f6ba356 ("IB/rdmavt: Annotate rvt_reset_qp()") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routinesMike Marciniszyn1-3/+2
This improves readability and hides the reference count mechanism from the client drivers. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/rdmvat: Fix double vfree() in rvt_create_qp() error pathMike Marciniszyn1-1/+2
The unwind logic for creating a user QP has a double vfree of the non-shared receive queue when handling a "too many qps" failure. The code unwinds the mmmap info by decrementing a reference count which will call rvt_release_mmap_info() which in turn does the vfree() of the r_rq.wq. The unwind code then does the same free. Fix by guarding the vfree() with the same test that is done in close and only do the vfree() if qp->ip is NULL. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/rdmavt: Eliminate redundant opcode test in mr ref clearIra Weiny1-2/+1
The use of the specific opcode test is redundant since all ack entry users correctly manipulate the mr pointer to selectively trigger the reference clearing. The overly specific test hinders the use of implementation specific operations. The change needs to get rid of the union to insure that an atomic value is not seen as an MR pointer. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/rdmavt, hfi1: Fix NFSoRDMA failure with FRMR enabledJianxin Xiong1-16/+32
Hanging has been observed while writing a file over NFSoRDMA. Dmesg on the server contains messages like these: [ 931.992501] svcrdma: Error -22 posting RDMA_READ [ 952.076879] svcrdma: Error -22 posting RDMA_READ [ 982.154127] svcrdma: Error -22 posting RDMA_READ [ 1012.235884] svcrdma: Error -22 posting RDMA_READ [ 1042.319194] svcrdma: Error -22 posting RDMA_READ Here is why: With the base memory management extension enabled, FRMR is used instead of FMR. The xprtrdma server issues each RDMA read request as the following bundle: (1)IB_WR_REG_MR, signaled; (2)IB_WR_RDMA_READ, signaled; (3)IB_WR_LOCAL_INV, signaled & fencing. These requests are signaled. In order to generate completion, the fast register work request is processed by the hfi1 send engine after being posted to the work queue, and the corresponding lkey is not valid until the request is processed. However, the rdmavt driver validates lkey when the RDMA read request is posted and thus it fails immediately with error -EINVAL (-22). This patch changes the work flow of local operations (fast register and local invalidate) so that fast register work requests are always processed immediately to ensure that the corresponding lkey is valid when subsequent work requests are posted. Local invalidate requests are processed immediately if fencing is not required and no previous local invalidate request is pending. To allow completion generation for signaled local operations that have been processed before posting to the work queue, an internal send flag RVT_SEND_COMPLETION_ONLY is added. The hfi1 send engine checks this flag and only generates completion for such requests. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/hfi1: Add the capability for reserved operationsMike Marciniszyn1-23/+62
This fix allows for support of in-kernel reserved operations without impacting the ULP user. The low level driver can register a non-zero value which will be transparently added to the send queue size and hidden from the ULP in every respect. ULP post sends will never see a full queue due to a reserved post send and reserved operations will never exceed that registered value. The s_avail will continue to track the ULP swqe availability and the difference between the reserved value and the reserved in use will track reserved availabity. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/rdmavt: Handle local operations in post sendJianxin Xiong1-5/+40
Some work requests are local operations, such as IB_WR_REG_MR and IB_WR_LOCAL_INV. They differ from non-local operations in that: (1) Local operations can be processed immediately without being posted to the send queue if neither fencing nor completion generation is needed. However, to ensure correct ordering, once a local operation is posted to the work queue due to fencing or completion requiement, all subsequent local operations must also be posted to the work queue until all the local operations on the work queue have completed. (2) Local operations don't send packets over the wire and thus don't need (and shouldn't update) the packet sequence numbers. Define a new a flag bit for the post send table to identify local operations. Add a new field to the QP structure to track the number of local operations on the send queue to determine if direct processing of new local operations should be enabled/disabled. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/rdmavt: Use new driver specific post send tableMike Marciniszyn1-38/+8
Change rvt_post_one_wr to use the new table mechanism for post send. Validate that each low level driver specifies the table. Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/rdmavt: Add data structures and routines for table driven post sendMike Marciniszyn1-5/+62
Add flexibility for driver dependent operations in post send because different drivers will have differing post send operation support. This includes data structure definitions to support a table driven scheme along with the necessary validation routine using the new table. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/rdmavt: Correct qp_priv_alloc() return value testMike Marciniszyn1-1/+3
The current drivers return errors from this calldown wrapped in an ERR_PTR(). The rdmavt code incorrectly tests for NULL. The code is fixed to use IS_ERR() and change ret according to the driver return value. Cc: Stable <stable@vger.kernel.org> # 4.6+ Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23IB/hfi1: Don't zero out qp->s_ack_queue in rvt_reset_qpAshutosh Dixit1-6/+0
Since rvt_reset_qp already zero's out qp->s_ack_queue head and tail pointers, there is no need to zero out qp->s_ack_queue itself. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17IB/rdmavt: Correct warning during QPN allocationBrian Welty1-2/+2
Correct calculation of the low order bits which should be unset based on use of qos_shift parameter when assigning QPN. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-06IB/rdmavt: Annotate rvt_reset_qp()Bart Van Assche1-0/+6
This patch avoids that sparse reports the following warning: rdmavt/qp.c:507:17: warning: context imbalance in 'rvt_reset_qp' - unexpected unlock Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-26IB/rdamvt: Fix rdmavt s_ack_queue sizingMike Marciniszyn1-2/+20
rdmavt allows the driver to specify the size of the ack queue, but only uses it for the modify QP limit testing for setting the atomic limit value. The driver dependent size is now used to size the s_ack_queue ring dynamicially. Since the driver knows its size, the driver will use its define for any ring size dependent code. Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-26IB/rdmavt: Insure QP vmalloc variants zero memoryMike Marciniszyn1-4/+4
The usage of the various vmalloc APIs do not consistently zero memory when allocating the swqe. Insure zeroing variants are used. Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-28IB/hfi1: Use global defines for upper bits in opcodeMike Marciniszyn1-3/+3
The awkward coding for setting the allowed_ops field was tripping an smatch warning. This patch uses the more appropriate defines from include/rdma to avoid the issue. As part of the patch remove a mask that was duplicated in rdmavt include files and use that mask as appropriate. Fixes: 8bea6b1cfe6f ("IB/rdmavt: Add create queue pair functionality") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-28IB/rdmavt: Fix send schedulingJubin John1-2/+2
call_send is used to determine whether to send immediately or schedule a send for later. The current logic in rdmavt is inverted and has a negative impact on the latency of the hfi1 and qib drivers. Fix this regression by correctly calling send immediately when call_send is set. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-17IB/rdmavt: Post receive for QP in ERR stateAlex Estrin1-9/+24
Accordingly IB Spec post WR to receive queue must complete with error if QP is in Error state. Please refer to C10-42, C10-97.2.1 Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-17IB/hfi1: Report pid in qp_stats to aid debugMike Marciniszyn1-0/+1
Tracking user/QP ownership is needed to debug issues with user ULPs like OpenMPI. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-10IB/qib, staging/rdma/hfi1, IB/rdmavt: progress selection changesMike Marciniszyn1-3/+7
The non-rdamvt versions of qib and hfi1 allow for a differing heuristic to override a schedule progress in favor of a direct call the the progress routine. This patch adds that for both drivers and rdmavt. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.