aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/sw/rxe (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-08RDMA/rxe: Distinguish between down links and disabled linksAndrew Boyer3-4/+11
In ib_query_port(), use the netdev's IFF_UP flag to determine phys_state (flag set = down = POLLING, flag clear = disabled = DISABLED). Callers can then use the phys_state field to distinguish between links which have a dead partner, cable missing, etc., from links which are turned off on the local node. This is useful for HA and supportability. Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-11-06rxe: fix error completion wr_id and qp_numSagi Grimberg1-4/+9
Error completions must still contain a valid wr_id and qp_num such that the consumer can rely on. Correctly fill these fields in receive error completions. Reported-by: Walker Benjamin <benjamin.walker@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Tested-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-11-06IB/rxe: clean skb queue directlyZhu Yanjun1-4/+1
When resp is in error state, the queued SKBs will not be handled. The function get_req cleans up the skb queue directly. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-17RDMA/drivers: Use core provided API for registering device attributesParav Pandit1-18/+8
Use rdma_set_device_sysfs_group() to register device attributes and simplify the driver. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-17IB/rxe: Remove unnecessary enum valuesNathan Chancellor3-12/+7
Clang warns when an emumerated type is implicitly converted to another. drivers/infiniband/sw/rxe/rxe.c:106:27: warning: implicit conversion from enumeration type 'enum rxe_device_param' to different enumeration type 'enum ib_atomic_cap' [-Wenum-conversion] rxe->attr.atomic_cap = RXE_ATOMIC_CAP; ~ ^~~~~~~~~~~~~~ drivers/infiniband/sw/rxe/rxe.c:131:22: warning: implicit conversion from enumeration type 'enum rxe_port_param' to different enumeration type 'enum ib_port_state' [-Wenum-conversion] port->attr.state = RXE_PORT_STATE; ~ ^~~~~~~~~~~~~~ drivers/infiniband/sw/rxe/rxe.c:132:24: warning: implicit conversion from enumeration type 'enum rxe_port_param' to different enumeration type 'enum ib_mtu' [-Wenum-conversion] port->attr.max_mtu = RXE_PORT_MAX_MTU; ~ ^~~~~~~~~~~~~~~~ drivers/infiniband/sw/rxe/rxe.c:133:27: warning: implicit conversion from enumeration type 'enum rxe_port_param' to different enumeration type 'enum ib_mtu' [-Wenum-conversion] port->attr.active_mtu = RXE_PORT_ACTIVE_MTU; ~ ^~~~~~~~~~~~~~~~~~~ drivers/infiniband/sw/rxe/rxe.c:151:24: warning: implicit conversion from enumeration type 'enum rxe_port_param' to different enumeration type 'enum ib_mtu' [-Wenum-conversion] ib_mtu_enum_to_int(RXE_PORT_ACTIVE_MTU); ~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~ 5 warnings generated. Use the appropriate values from the expected enumerated type so no conversion needs to happen then remove the unneeded definitions. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-03RDMA: Remove unused parameter from ib_modify_qp_is_ok()Kamal Heib1-2/+1
The ll parameter is not used in ib_modify_qp_is_ok(), so remove it. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-03RDMA/rxe: Remove unused addr_same()Kamal Heib1-5/+0
This function is not in use - delete it. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-03IB/rxe: avoid srq memory leakZhu Yanjun1-2/+8
In rxe_queue_init, q and q->buf are allocated. In do_mmap_info, q->ip is allocated. When error occurs, rxe_srq_from_init and the later error handler do not free these allocated memories. This will make memory leak. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-30IB/rxe: replace kvfree with vfreeZhu Yanjun2-4/+5
The buf is allocated by vmalloc_user in the function rxe_queue_init. So it is better to free it by vfree. Fixes: 8700e3e7c485 ("Soft RoCE driver") Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-26RDMA/drivers: Use dev_name instead of ibdev->nameJason Gunthorpe1-1/+1
These return the same thing but dev_name is a more conventional use of the kernel API. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-26RDMA/drivers: Use dev_err/dbg/etc instead of pr_* + ibdev->nameJason Gunthorpe2-3/+3
Kernel convention is that a driver for a subsystem will print using dev_* on the subsystem's struct device, or with dev_* on the physical device. Drivers should rarely use a pr_* function. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-26RDMA: Fully setup the device name in ib_register_deviceJason Gunthorpe1-2/+1
The current code has two copies of the device name, ibdev->dev and dev_name(&ibdev->dev), and they are setup at different times, which is very confusing. Set them both up at the same time and make dev_name() the lead name, which is the proper use of the driver core APIs. To make it very clear that the name is not valid until registration pass it in to the ib_register_device() call rather than messing with ibdev->name directly. Also the reorganization now checks that dev_name is unique even if it does not contain a %. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Adit Ranadive <aditr@vmware.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Devesh Sharma <devesh.sharma@broadcom.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
2018-08-30IB/rxe: fixes for rdma read retryVijay Immanuel2-11/+25
When a read request is retried for the remaining partial data, the response may restart from read response first or read response only. So support those cases. Do not advance the comp psn beyond the current wqe's last_psn as that could skip over an entire read wqe and will cause the req_retry() logic to set an incorrect req psn. An example sequence is as follows: Write PSN 40 -- this is the current WQE. Read request PSN 41 Write PSN 42 Receive ACK PSN 42 -- this will complete the current WQE for PSN 40, and set the comp psn to 42 which is a problem because the read request at PSN 41 has been skipped over. So when req_retry() tries to retransmit the read request, it sets the req psn to 42 which is incorrect. When retrying a read request, calculate the number of psns completed based on the dma resid instead of the wqe first_psn. The wqe first_psn could have moved if the read request was retried multiple times. Set the reth length to the dma resid to handle read retries for the remaining partial data. Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-08-30IB/rxe: avoid back-to-back retriesVijay Immanuel2-1/+18
Error retries can occur due to timeouts, NAKs or receiving packets beyond the current read request. Avoid back-to-back retries due to packet processing, by only retrying the initial attempt immediately. Subsequent retries must be due to timeouts. Continue to process completion packets after scheduling a retry. Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-08-30IB/rxe: fix for duplicate request processing and ack psnsVijay Immanuel2-2/+8
Don't reset the resp opcode for a replayed read response. The resp opcode could be in the middle of a write or send sequence, when the duplicate read request was received. An example sequence is as follows: - Receive read request for 12KB PSN 20. Transmit read response first, middle and last with PSNs 20,21,22. - Receive write first PSN 23. At this point the resp psn is 24 and resp opcode is write first. - The sender notices that PSN 20 is dropped and retransmits. Receive read request for 12KB PSN 20. Transmit read response first, middle and last with PSNs 20,21,22. The resp opcode is set to -1, the resp psn remains 24. - Receive write first PSN 23. This is processed by duplicate_request(). The resp opcode remains -1 and resp psn remains 24. - Receive write middle PSN 24. check_op_seq() reports a missing first error since the resp opcode is -1. When sending an ack for a duplicate send or write request, use the psn of the previous ack sent. Do not use the psn of a read response for the ack. An example sequence is as follows: - Receive write PSN 30. Transmit ACK for PSN 30. - Receive read request 4KB PSN 31. Transmit read response with PSN 31. The resp psn is now 32. - The sender notices that PSN 30 is dropped and retransmits. Receive write PSN 30. duplicate_request() sends an ACK with PSN 31. That is incorrect since PSN 31 was a read request. Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-08-30IB/rxe: Refactor lookup memory functionParav Pandit1-24/+11
Consolidate all error checks under single if() condition and use helper unlikely() macro for them, in addition drop unneeded goto labels. rxe_pool_get_index() already provides RB tree based efficient lookup. Avoid doing extra checks for error cases which are rare and already covered by rxe_pool_get_index(). Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-08-30IB/rxe: Avoid NULL check when search is successfulParav Pandit1-4/+3
While performing lookup in a pool, if entry is found, take the reference right there, instead of checking again outside the loop and save one branch. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-08-30IB/rxe: Change pool state enums to capital lettersParav Pandit2-8/+8
Normal practice is to have enum defines in capital letters. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-08-30IB/rxe: Replace spinlock with rwlockParav Pandit2-19/+19
Concurrent readers which read rb tree are protected using read lock. Concurrent writers which add element to pool are protected using write lock. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-08-30IB/rxe: Simplify rxe_find_route() to avoid GID query for netdevParav Pandit4-24/+13
rxe_prepare() is called on an skb which has ndev already initialized by rxe_init_packet(). Therefore avoid querying the GID attribute again and use the available netdevice from the skb->dev. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Tested-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-08-30IB/rxe: remove redudant qpn checkZhu Yanjun1-2/+2
In the commit 536ca245c512 ("IB/rxe: Drop QP0 silently"), if qpn is zero, the function directly returns. So in the following function, it is not necessary to check qpn. The qpn check in the function check_keys is removed. Fixes: 536ca245c512 ("IB/rxe: Drop QP0 silently") CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-08-30IB/rxe: vary the source udp port for receive scalingVijay Immanuel3-4/+15
Select the source udp port number for a QP based on the source QPN. This provides a better spread of traffic across NIC RX queues for RC/UC QPs. Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-08-16Merge tag 'v4.18' into rdma.git for-nextJason Gunthorpe1-1/+4
Resolve merge conflicts from the -rc cycle against the rdma.git tree: Conflicts: drivers/infiniband/core/uverbs_cmd.c - New ifs added to ib_uverbs_ex_create_flow in -rc and for-next - Merge removal of file->ucontext in for-next with new code in -rc drivers/infiniband/core/uverbs_main.c - for-next removed code from ib_uverbs_write() that was modified in for-rc Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-08RDMA/rxe: Set wqe->status correctly if an unexpected response is receivedBart Van Assche1-0/+1
Every function that returns COMPST_ERROR must set wqe->status to another value than IB_WC_SUCCESS before returning COMPST_ERROR. Fix the only code path for which this is not yet the case. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: <stable@vger.kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-30RDMA, core and ULPs: Declare ib_post_send() and ib_post_recv() arguments constBart Van Assche1-9/+9
Since neither ib_post_send() nor ib_post_recv() modify the data structure their second argument points at, declare that argument const. This change makes it necessary to declare the 'bad_wr' argument const too and also to modify all ULPs that call ib_post_send(), ib_post_recv() or ib_post_srq_recv(). This patch does not change any functionality but makes it possible for the compiler to verify whether the ib_post_(send|recv|srq_recv) really do not modify the posted work request. To make this possible, only one cast had to be introduce that casts away constness, namely in rpcrdma_post_recvs(). The only way I can think of to avoid that cast is to introduce an additional loop in that function or to change the data type of bad_wr from struct ib_recv_wr ** into int (an index that refers to an element in the work request list). However, both approaches would require even more extensive changes than this patch. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-30RDMA: Constify the argument of the work request conversion functionsBart Van Assche1-4/+4
When posting a send work request, the work request that is posted is not modified by any of the RDMA drivers. Make this explicit by constifying most ib_send_wr pointers in RDMA transport drivers. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-24IB/rxe: Drop QP0 silentlyZhu Yanjun1-2/+7
According to "Annex A16: RDMA over Converged Ethernet (RoCE)": A16.4.3 MANAGEMENT INTERFACES As defined in the base specification, a special Queue Pair, QP0 is defined solely for communication between subnet manager(s) and subnet management agents. Since such an IB-defined subnet management architecture is outside the scope of this annex, it follows that there is also no requirement that a port which conforms to this annex be associated with a QP0. Thus, for end nodes designed to conform to this annex, the concept of QP0 is undefined and unused for any port connected to an Ethernet network. CA16-8: A packet arriving at a RoCE port containing a BTH with the destination QP field set to QP0 shall be silently dropped. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-09RDMA/rxe: Simplify the error handling code in rxe_create_ah()Bart Van Assche1-10/+3
This patch not only simplifies the error handling code in rxe_create_ah() but also removes the dead code that was left behind by commit 47ec38666210 ("RDMA: Convert drivers to use sgid_attr instead of sgid_index"). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-29IB/rxe: don't clear the tx queue on every transferVijay Immanuel1-10/+7
Do not call sk_dst_set() on every packet transfer because that calls sk_tx_queue_clear(), which clears the tx queue. A QP must stay on the same tx queue to maintain packet order. Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Acked-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/core: add max_send_sge and max_recv_sge attributesSteve Wise2-5/+6
This patch replaces the ib_device_attr.max_sge with max_send_sge and max_recv_sge. It allows ulps to take advantage of devices that have very different send and recv sge depths. For example cxgb4 has a max_recv_sge of 4, yet a max_send_sge of 16. Splitting out these attributes allows much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW API. Consider a large RDMA WRITE that has 16 scattergather entries. With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of 16, it can be done with 1 WRITE WR. Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/rxe: avoid unnecessary NULL checkZhu Yanjun1-2/+1
Before goto err2, the variable qp is checked. So it is not necessary to check qp in label err2. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/rxe: support for 802.1q VLAN on the listenerVijay Immanuel1-0/+5
Set the vlan flag and vlan_id field in the wc for rdma_listen() to work over VLAN. This is required by ib_init_ah_attr_from_wc() which is called by the CM REQ handler. Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Reviewed-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/rxe: increase max MR limitVijay Immanuel1-1/+1
Increase the max MR limit to support more I/O queues for NVMe over Fabrics hosts. Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/rxe: Fix missing completion for mem_reg work requestsVijay Immanuel1-0/+3
Run the completer task to post a work completion after processing a memory registration or invalidate work request. This covers the case where the memory registration or invalidate was the last work request posted to the qp. Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Reviewed-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18RDMA: Convert drivers to use sgid_attr instead of sgid_indexParav Pandit4-57/+13
The core code now ensures that all driver callbacks that receive an rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present. Drivers can use this pointer instead of calling a query function with sgid_index. This simplifies the drivers and also avoids races where a gid_index lookup may return different data if it is changed. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-18IB/rxe: Do not hide uABI stuff in memcpyJason Gunthorpe1-3/+16
struct rxe_global_route and struct ib_global_route are not the same thing and should not be memcpy'd over each other, do a member by member copy instead. This allows the layout of the in-kernel struct ib_global_route to be changed without breaking rxe. Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/rxe: Use rdma GID APIParav Pandit2-37/+25
rxe_netdev_from_av can now be done by the core code directly from the gid_attrs, no need for a helper in the driver. ib_find_cached_gid_by_port can be switched to use the rdma version here as well. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-11IB/rxe: avoid double kfree skbZhu Yanjun1-1/+1
In rxe_send, when network_type is not RDMA_NETWORK_IPV4 or RDMA_NETWORK_IPV6, skb is freed and -EINVAL is returned. Then rxe_xmit_packet will return -EINVAL, too. In rxe_requester, this skb is double freed. In rxe_requester, kfree_skb is needed only after fill_packet fails. So kfree_skb is moved from label err to test fill_packet. Fixes: 5793b4652155 ("IB/rxe: remove unnecessary skb_clone in xmit") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-28Merge branch 'mr_fix' into git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma for-nextJason Gunthorpe1-9/+1
Update mlx4 to support user MR creation against read-only memory, previously it required the memory to be writable. Based on rdma for-rc due to dependencies. * mr_fix: (2 commits) IB/mlx4: Mark user MR as writable if actual virtual memory is writable IB/core: Make testing MR flags for writability a static inline function
2018-05-28IB/rxe: avoid unnecessary exportZhu Yanjun1-1/+0
The function rxe_remove_all is only used in this modules. There is no other modules that call this function. So it is not necessary to export it. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-17IB/rxe: avoid calling WARN_ON_ONCE twiceZhu Yanjun1-4/+0
In the exit branch, WARN_ON_ONCE is called to show stack. So it is not necessary to call WARN_ON_ONCE before going to exit. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-15IB: Fix RDMA_RXE and INFINIBAND_RDMAVT dependencies for DMA_VIRT_OPSBen Hutchings1-0/+1
DMA_VIRT_OPS requires that dma_addr_t is at least as wide as a pointer, which is expressed as a dependency on !64BIT || ARCH_DMA_ADDR_T_64BIT. For parisc64 this is not true, and if these IB modules are enabled, kconfig warns: WARNING: unmet direct dependencies detected for DMA_VIRT_OPS Depends on [n]: HAS_DMA [=y] && (!64BIT [=y] || ARCH_DMA_ADDR_T_64BIT) Selected by [m]: - INFINIBAND_RDMAVT [=m] && INFINIBAND [=m] && 64BIT [=y] && PCI [=y] - RDMA_RXE [=m] && INET [=y] && PCI [=y] && INFINIBAND [=m] Add dependencies to fix this. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-09Merge branch 'k.o/for-rc' into k.o/wip/dl-for-nextDoug Ledford3-7/+2
Several items of conflict have arisen between the RDMA stack's for-rc branch and upcoming for-next work: 9fd4350ba895 ("IB/rxe: avoid double kfree_skb") directly conflicts with 2e47350789eb ("IB/rxe: optimize the function duplicate_request") Patches already submitted by Intel for the hfi1 driver will fail to apply cleanly without this merge Other people on the mailing list have notified that their upcoming patches also fail to apply cleanly without this merge Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-09nvmet,rxe: defer ip datagram sending to taskletAlexandru Moise1-9/+1
This addresses 3 separate problems: 1. When using NVME over Fabrics we may end up sending IP packets in interrupt context, we should defer this work to a tasklet. [ 50.939957] WARNING: CPU: 3 PID: 0 at kernel/softirq.c:161 __local_bh_enable_ip+0x1f/0xa0 [ 50.942602] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G W 4.17.0-rc3-ARCH+ #104 [ 50.945466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [ 50.948163] RIP: 0010:__local_bh_enable_ip+0x1f/0xa0 [ 50.949631] RSP: 0018:ffff88009c183900 EFLAGS: 00010006 [ 50.951029] RAX: 0000000080010403 RBX: 0000000000000200 RCX: 0000000000000001 [ 50.952636] RDX: 0000000000000000 RSI: 0000000000000200 RDI: ffffffff817e04ec [ 50.954278] RBP: ffff88009c183910 R08: 0000000000000001 R09: 0000000000000614 [ 50.956000] R10: ffffea00021d5500 R11: 0000000000000001 R12: ffffffff817e04ec [ 50.957779] R13: 0000000000000000 R14: ffff88009566f400 R15: ffff8800956c7000 [ 50.959402] FS: 0000000000000000(0000) GS:ffff88009c180000(0000) knlGS:0000000000000000 [ 50.961552] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 50.963798] CR2: 000055c4ec0ccac0 CR3: 0000000002209001 CR4: 00000000000606e0 [ 50.966121] Call Trace: [ 50.966845] <IRQ> [ 50.967497] __dev_queue_xmit+0x62d/0x690 [ 50.968722] dev_queue_xmit+0x10/0x20 [ 50.969894] neigh_resolve_output+0x173/0x190 [ 50.971244] ip_finish_output2+0x2b8/0x370 [ 50.972527] ip_finish_output+0x1d2/0x220 [ 50.973785] ? ip_finish_output+0x1d2/0x220 [ 50.975010] ip_output+0xd4/0x100 [ 50.975903] ip_local_out+0x3b/0x50 [ 50.976823] rxe_send+0x74/0x120 [ 50.977702] rxe_requester+0xe3b/0x10b0 [ 50.978881] ? ip_local_deliver_finish+0xd1/0xe0 [ 50.980260] rxe_do_task+0x85/0x100 [ 50.981386] rxe_run_task+0x2f/0x40 [ 50.982470] rxe_post_send+0x51a/0x550 [ 50.983591] nvmet_rdma_queue_response+0x10a/0x170 [ 50.985024] __nvmet_req_complete+0x95/0xa0 [ 50.986287] nvmet_req_complete+0x15/0x60 [ 50.987469] nvmet_bio_done+0x2d/0x40 [ 50.988564] bio_endio+0x12c/0x140 [ 50.989654] blk_update_request+0x185/0x2a0 [ 50.990947] blk_mq_end_request+0x1e/0x80 [ 50.991997] nvme_complete_rq+0x1cc/0x1e0 [ 50.993171] nvme_pci_complete_rq+0x117/0x120 [ 50.994355] __blk_mq_complete_request+0x15e/0x180 [ 50.995988] blk_mq_complete_request+0x6f/0xa0 [ 50.997304] nvme_process_cq+0xe0/0x1b0 [ 50.998494] nvme_irq+0x28/0x50 [ 50.999572] __handle_irq_event_percpu+0xa2/0x1c0 [ 51.000986] handle_irq_event_percpu+0x32/0x80 [ 51.002356] handle_irq_event+0x3c/0x60 [ 51.003463] handle_edge_irq+0x1c9/0x200 [ 51.004473] handle_irq+0x23/0x30 [ 51.005363] do_IRQ+0x46/0xd0 [ 51.006182] common_interrupt+0xf/0xf [ 51.007129] </IRQ> 2. Work must always be offloaded to tasklet for rxe_post_send_kernel() when using NVMEoF in order to solve lock ordering between neigh->ha_lock seqlock and the nvme queue lock: [ 77.833783] Possible interrupt unsafe locking scenario: [ 77.833783] [ 77.835831] CPU0 CPU1 [ 77.837129] ---- ---- [ 77.838313] lock(&(&n->ha_lock)->seqcount); [ 77.839550] local_irq_disable(); [ 77.841377] lock(&(&nvmeq->q_lock)->rlock); [ 77.843222] lock(&(&n->ha_lock)->seqcount); [ 77.845178] <Interrupt> [ 77.846298] lock(&(&nvmeq->q_lock)->rlock); [ 77.847986] [ 77.847986] *** DEADLOCK *** 3. Same goes for the lock ordering between sch->q.lock and nvme queue lock: [ 47.634271] Possible interrupt unsafe locking scenario: [ 47.634271] [ 47.636452] CPU0 CPU1 [ 47.637861] ---- ---- [ 47.639285] lock(&(&sch->q.lock)->rlock); [ 47.640654] local_irq_disable(); [ 47.642451] lock(&(&nvmeq->q_lock)->rlock); [ 47.644521] lock(&(&sch->q.lock)->rlock); [ 47.646480] <Interrupt> [ 47.647263] lock(&(&nvmeq->q_lock)->rlock); [ 47.648492] [ 47.648492] *** DEADLOCK *** Using NVMEoF after this patch seems to finally be stable, without it, rxe eventually deadlocks the whole system and causes RCU stalls. Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-01IB/cxgb4: use skb_put_zero()/__skb_put_zeroYueHaibing1-3/+1
Use the recently introduced helper to replace the pattern of skb_put_zero/__skb_put() && memset(). Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/rxe: avoid double kfree_skbZhu Yanjun2-6/+1
When skb is sent, it will pass the following functions in soft roce. rxe_send [rdma_rxe] ip_local_out __ip_local_out ip_output ip_finish_output ip_finish_output2 dev_queue_xmit __dev_queue_xmit dev_hard_start_xmit In the above functions, if error occurs in the above functions or iptables rules drop skb after ip_local_out, kfree_skb will be called. So it is not necessary to call kfree_skb in soft roce module again. Or else crash will occur. The steps to reproduce: server client --------- --------- |1.1.1.1|<----rxe-channel--->|1.1.1.2| --------- --------- On server: rping -s -a 1.1.1.1 -v -C 10000 -S 512 On client: rping -c -a 1.1.1.1 -v -C 10000 -S 512 The kernel configs CONFIG_DEBUG_KMEMLEAK and CONFIG_DEBUG_OBJECTS are enabled on both server and client. When rping runs, run the following command in server: iptables -I OUTPUT -p udp --dport 4791 -j DROP Without this patch, crash will occur. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/rxe: add RXE_START_MASK for rxe_opcode IB_OPCODE_RC_SEND_ONLY_INVJianchao Wang1-1/+1
w/o RXE_START_MASK, the last_psn of IB_OPCODE_RC_SEND_ONLY_INV will not be updated in update_wqe_psn, and the corresponding wqe will not be acked in rxe_completer due to its last_psn is zero. Finally, the other wqe will also not be able to be acked, because the wqe of IB_OPCODE_RC_SEND_ONLY_INV with last_psn 0 is still there. This causes large amount of io timeout when nvmeof is over rxe. Add RXE_START_MASK for IB_OPCODE_RC_SEND_ONLY_INV to fix this. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/rxe: remove unused function variableZhu Yanjun6-21/+17
In the functions rxe_mem_init_dma, rxe_mem_init_user, rxe_mem_init_fast and copy_data, the function variable rxe is not used. So this function variable rxe is removed. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/rxe: change rxe_set_mtu function type to voidZhu Yanjun2-7/+3
The function rxe_set_mtu always returns zero. So this function type is changed to void. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/rxe: Change rxe_rcv to return voidYuval Shaia4-9/+12
It always returns 0. Change return type to void. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.