Age | Commit message (Collapse) | Author | Files | Lines |
|
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Change rxe pools to use kzalloc instead of kmem_cache to allocate memory
for rxe objects. The pools are not really necessary and they trigger
hardened user copy warnings as the ioctl framework copies the QP number
directly to userspace.
Also the general project to move object alloation to the core code will
eventually clean these out anyhow.
Link: https://lore.kernel.org/r/20200827163535.2632-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add SPDX headers to all rxe .c and .h files.
Link: https://lore.kernel.org/r/20200827145439.2273-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fixed several minor checkpatch warnings in existing rxe source.
Link: https://lore.kernel.org/r/20200820224638.3212-3-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Creating rxe device on top of vlan interface will create a non-functional
device that has an empty gids table and can't be used for rdma cm
communication.
This is caused by the logic in
enum_all_gids_of_dev_cb()/is_eth_port_of_netdev(), which only considers
networks connected to "upper devices" of the configured network device,
resulting in an empty set of gids for a vlan interface, and attempts to
connect via this rdma device fail in cm_init_av_for_response because no
gids can be resolved.
Apparently, this behavior was implemented to fit the HW-RoCE devices that
create RoCE device per port, therefore RXE must behave the same like
HW-RoCE devices and create rxe device per real device only.
In order to communicate via a vlan interface, the user must use the gid
index of the vlan address instead of creating rxe over vlan.
Link: https://lore.kernel.org/r/20200811150415.3693-1-goody698@gmail.com
Signed-off-by: Mohammad Heib <goody698@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"A quiet cycle after the larger 5.8 effort. Substantially cleanup and
driver work with a few smaller features this time.
- Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re
- Removal of dead or redundant code across the drivers
- RAW resource tracker dumps to include a device specific data blob
for device objects to aide device debugging
- Further advance the IOCTL interface, remove the ability to turn it
off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands
- Remove stubs related to devices with no pkey table
- A shared CQ scheme to allow multiple ULPs to share the CQ rings of
a device to give higher performance
- Several more static checker, syzkaller and rare crashers fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits)
RDMA/mlx5: Fix flow destination setting for RDMA TX flow table
RDMA/rxe: Remove pkey table
RDMA/umem: Add a schedule point in ib_umem_get()
RDMA/hns: Fix the unneeded process when getting a general type of CQE error
RDMA/hns: Fix error during modify qp RTS2RTS
RDMA/hns: Delete unnecessary memset when allocating VF resource
RDMA/hns: Remove redundant parameters in set_rc_wqe()
RDMA/hns: Remove support for HIP08_A
RDMA/hns: Refactor hns_roce_v2_set_hem()
RDMA/hns: Remove redundant hardware opcode definitions
RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP
RDMA/include: Replace license text with SPDX tags
RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq
RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting
RDMA/cma: Execute rdma_cm destruction from a handler properly
RDMA/cma: Remove unneeded locking for req paths
RDMA/cma: Using the standard locking pattern when delivering the removal event
RDMA/cma: Simplify DEVICE_REMOVAL for internal_id
RDMA/efa: Add EFA 0xefa1 PCI ID
RDMA/efa: User/kernel compatibility handshake mechanism
...
|
|
Pull uninitialized_var() macro removal from Kees Cook:
"This is long overdue, and has hidden too many bugs over the years. The
series has several "by hand" fixes, and then a trivial treewide
replacement.
- Clean up non-trivial uses of uninitialized_var()
- Update documentation and checkpatch for uninitialized_var() removal
- Treewide removal of uninitialized_var()"
* tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
compiler: Remove uninitialized_var() macro
treewide: Remove uninitialized_var() usage
checkpatch: Remove awareness of uninitialized_var() macro
mm/debug_vm_pgtable: Remove uninitialized_var() usage
f2fs: Eliminate usage of uninitialized_var() macro
media: sur40: Remove uninitialized_var() usage
KVM: PPC: Book3S PR: Remove uninitialized_var() usage
clk: spear: Remove uninitialized_var() usage
clk: st: Remove uninitialized_var() usage
spi: davinci: Remove uninitialized_var() usage
ide: Remove uninitialized_var() usage
rtlwifi: rtl8192cu: Remove uninitialized_var() usage
b43: Remove uninitialized_var() usage
drbd: Remove uninitialized_var() usage
x86/mm/numa: Remove uninitialized_var() usage
docs: deprecated.rst: Add uninitialized_var()
|
|
The RoCE spec requires RoCE devices to support only the default pkey.
However the rxe driver maintains a 64 enties pkey table and uses only the
first entry. Remove the pkey table and hard code a table of length one
hard wired with the default pkey. Replace all checks of the pkey_table
with a comparison to the default_pkey instead.
Link: https://lore.kernel.org/r/20200721101618.686110-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The lookaside count is improperly initialized to the size of the
Receive Queue with the additional +1. In the traces below, the
RQ size is 384, so the count was set to 385.
The lookaside count is then rarely refreshed. Note the high and
incorrect count in the trace below:
rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9008 wr_id 55c7206d75a0 qpn c
qpt 2 pid 3018 num_sge 1 head 1 tail 0, count 385
rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1
The head,tail indicate there is only one RWQE posted although the count
says 385 and we correctly return the element 0.
The next call to rvt_get_rwqe with the decremented count:
rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9058 wr_id 0 qpn c
qpt 2 pid 3018 num_sge 0 head 1 tail 1, count 384
rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1
Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1,
which is not valid because of the bogus high count.
Best case, the RWQE has never been posted and the rc logic sees an RWQE
that is too small (all zeros) and puts the QP into an error state.
In the worst case, a server slow at posting receive buffers might fool
rvt_get_rwqe() into fetching an old RWQE and corrupt memory.
Fix by deleting the faulty initialization code and creating an
inline to fetch the posted count and convert all callers to use
new inline.
Fixes: f592ae3c999f ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs")
Link: https://lore.kernel.org/r/20200728183848.22226.29132.stgit@awfm-01.aw.intel.com
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Cc: <stable@vger.kernel.org> # 5.4.x
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Tested-by: Honggang Li <honli@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Now that the query_pkey() isn't mandatory by the RDMA core for iwarp
providers, this callback can be removed.
Link: https://lore.kernel.org/r/20200714183414.61069-5-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
rxe_post_send_kernel() iterates over linked list of wr's, until the
wr->next ptr is NULL. However if we've got an interrupt after last wr is
posted, control may be returned to the code after send completion callback
is executed and wr memory is freed.
As a result, wr->next pointer may contain incorrect value leading to
panic. Store the wr->next on the stack before posting it.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200716190340.23453-1-m.malygin@yadro.com
Signed-off-by: Mikhail Malygin <m.malygin@yadro.com>
Signed-off-by: Sergey Kojushev <s.kojushev@yadro.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Instead of returning IB_LINK_LAYER_ETHERNET from rxe_link_layer, return it
directly from get_link_layer callback and remove rxe_link_layer().
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-5-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The return value from rxe_mem_init_dma() is always 0 - change it to be
void and fix the callers accordingly.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-4-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The return value from rxe_init_port_param() is always 0 - change it to be
void.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-3-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Both pkey_tbl_len and gid_tbl_len are set in rxe_init_port_param() - so no
need to check if they aren't set.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200705104313.283034-2-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Move the initialization of the vendor_part_id to be before calling
ib_register_device(), this is needed because the query_device() callback
is called from the context of ib_register_device() before initializing the
vendor_part_id, so the reported value is wrong.
Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20200707130931.444724-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In the loopback tests, the following call trace occurs.
Call Trace:
__rxe_do_task+0x1a/0x30 [rdma_rxe]
rxe_qp_destroy+0x61/0xa0 [rdma_rxe]
rxe_destroy_qp+0x20/0x60 [rdma_rxe]
ib_destroy_qp_user+0xcc/0x220 [ib_core]
uverbs_free_qp+0x3c/0xc0 [ib_uverbs]
destroy_hw_idr_uobject+0x24/0x70 [ib_uverbs]
uverbs_destroy_uobject+0x43/0x1b0 [ib_uverbs]
uobj_destroy+0x41/0x70 [ib_uverbs]
__uobj_get_destroy+0x39/0x70 [ib_uverbs]
ib_uverbs_destroy_qp+0x88/0xc0 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xb9/0xf0 [ib_uverbs]
ib_uverbs_cmd_verbs+0xb16/0xc30 [ib_uverbs]
The root cause is that the actual RDMA connection is not created in the
loopback tests and the rxe_match_dgid will fail randomly.
To fix this call trace which appear in the loopback tests, skip check of
the dgid.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200630123605.446959-1-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Allocating an MR flow can only be initiated by kernel users, and not from
userspace so a udata parameter is redundant.
Link: https://lore.kernel.org/r/20200706120343.10816-4-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This function is not in use - delete it.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200622100731.27359-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Silence documentation build warnings by correcting kernel-doc comments.
./drivers/infiniband/core/verbs.c:1004: warning: Function parameter or member 'uobject' not described in 'ib_create_srq_user'
./drivers/infiniband/core/verbs.c:1004: warning: Function parameter or member 'udata' not described in 'ib_create_srq_user'
./drivers/infiniband/core/umem_odp.c:161: warning: Function parameter or member 'ops' not described in 'ib_umem_odp_alloc_child'
./drivers/infiniband/core/umem_odp.c:225: warning: Function parameter or member 'ops' not described in 'ib_umem_odp_get'
./drivers/infiniband/sw/rdmavt/ah.c:104: warning: Excess function parameter 'ah_attr' description in 'rvt_create_ah'
./drivers/infiniband/sw/rdmavt/ah.c:104: warning: Excess function parameter 'create_flags' description in 'rvt_create_ah'
./drivers/infiniband/ulp/iser/iscsi_iser.h:363: warning: Function parameter or member 'all_list' not described in 'iser_fr_desc'
./drivers/infiniband/ulp/iser/iscsi_iser.h:377: warning: Function parameter or member 'all_list' not described in 'iser_fr_pool'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd0' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd1' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd2' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd3' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd4' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd0' not described in 'opa_per_veswport_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd1' not described in 'opa_per_veswport_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd2' not described in 'opa_per_veswport_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd3' not described in 'opa_per_veswport_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:342: warning: Function parameter or member 'reserved' not described in 'opa_veswport_summary_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd0' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd1' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd2' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd3' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd4' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd5' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd6' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd7' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd8' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd9' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:460: warning: Function parameter or member 'reserved' not described in 'opa_vnic_vema_mad'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:485: warning: Function parameter or member 'reserved' not described in 'opa_vnic_notice_attr'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:500: warning: Function parameter or member 'reserved' not described in 'opa_vnic_vema_mad_trap'
Link: https://lore.kernel.org/r/5373936.DvuYhMxLoT@laptop.coltonlewis.name
Signed-off-by: Colton Lewis <colton.w.lewis@protonmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
In case of failure of alloc_ud_wq_attr(), the memory allocated by
rvt_alloc_rq() is not freed. Fix it by calling rvt_free_rq() using the
existing clean-up code.
Fixes: d310c4bf8aea ("IB/{rdmavt, hfi1, qib}: Remove AH refcount for UD QPs")
Link: https://lore.kernel.org/r/20200614041148.131983-1-pakki001@umn.edu
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The variable buf_addr is type dma_addr_t, which may not be the same size
as a pointer. To ensure it is the correct size, cast to a uintptr_t.
Fixes: c536277e0db1 ("RDMA/siw: Fix 64/32bit pointer inconsistency")
Link: https://lore.kernel.org/r/20200610174717.15932-1-tseewald@gmail.com
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.
The change is generated using coccinelle with the following rule:
// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .
@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"A more active cycle than most of the recent past, with a few large,
long discussed works this time.
The RNBD block driver has been posted for nearly two years now, and
flowing through RDMA due to it also introducing a new ULP.
The removal of FMR has been a recurring discussion theme for a long
time.
And the usual smattering of features and bug fixes.
Summary:
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and
a mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block
RDMA device specific to ionos's cloud environment. It brings strong
multipath and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple
async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs
and drivers. FRWR should be preferred for at least a decade now"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits)
RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
RDMA/mlx5: Return ECE DC support
RDMA/mlx5: Don't rely on FW to set zeros in ECE response
RDMA/mlx5: Return an error if copy_to_user fails
IB/hfi1: Use free_netdev() in hfi1_netdev_free()
RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
RDMA/core: Move and rename trace_cm_id_create()
IB/hfi1: Fix hfi1_netdev_rx_init() error handling
RDMA: Remove 'max_map_per_fmr'
RDMA: Remove 'max_fmr'
RDMA/core: Remove FMR device ops
RDMA/rdmavt: Remove FMR memory registration
RDMA/mthca: Remove FMR support for memory registration
RDMA/mlx4: Remove FMR support for memory registration
RDMA/i40iw: Remove FMR leftovers
RDMA/bnxt_re: Remove FMR leftovers
RDMA/mlx5: Remove FMR leftovers
RDMA/core: Remove FMR pool API
RDMA/rds: Remove FMR support for memory registration
RDMA/srp: Remove support for FMR memory registration
...
|
|
Now that FMR support is gone, this attribute can be deleted from all
places.
Link: https://lore.kernel.org/r/12-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Use FRWR method to register memory by default and remove the ancient and
unsafe FMR method.
Link: https://lore.kernel.org/r/10-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add a helper to directly set the TCP_NODELAY sockopt from kernel space
without going through a fake uaccess. Cleanup the callers to avoid
pointless wrappers now that this is a simple function call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a helper to directly set the SO_REUSEADDR sockopt from kernel space
without going through a fake uaccess.
For this the iscsi target now has to formally depend on inet to avoid
a mostly theoretical compile failure. For actual operation it already
did depend on having ipv4 or ipv6 support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Linux 5.7-rc6
Conflict in drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
resolved by deleting dr_cq_event, matching how netdev resolved it.
Required for dependencies in the following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Adds capability to create a qpn to be recognized as an accelerated
UD QP for ipoib.
This is accomplished by reserving 0x81 in byte[0] of the qpn as the
prefix for these qp types and reserving qpns between 0x810000 and
0x81ffff.
The hfi1 capability mask already contained a flag for the VNIC netdev.
This has been renamed and extended to include both VNIC and ipoib.
The rvt code to allocate qps now recognizes this flag and sets 0x81
into byte[0] of the qpn.
The code to allocate qpns is modified to reset the qpn numbering when it
is detected that a value is located in byte[0] for a UD QP and it is a
qpn being requested for net dev use. If it is a regular UD QP then it is
allowable to have bits set in byte[0] of the qpn and provide the
previously normal behavior.
The code to free the qpn now checks for the AIP prefix value of 0x81 and
removes it from the qpn before being freed so that the lower 16 bit
number can be reused.
This patch requires minor changes in the IB core and ipoib to facilitate
the creation of accelerated UP QPs.
Link: https://lore.kernel.org/r/20200511160607.173205.11757.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The current codebase makes use of one-element arrays in the following
form:
struct something {
int length;
u8 data[1];
};
struct something *instance;
instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);
but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on. So, replace
the one-element array with a flexible-array member.
Also, make use of the new struct_size() helper to properly calculate the
size of struct siw_pbl.
This issue was found with the help of Coccinelle and, audited and fixed
_manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lore.kernel.org/r/20200519233018.GA6105@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The commit below modified rxe_create_mmap_info() to return ERR_PTR's but
didn't update the callers to handle them. Modify rxe_create_mmap_info() to
only return ERR_PTR and fix all error checking after
rxe_create_mmap_info() is called.
Ensure that all other exit paths properly set the error return.
Fixes: ff23dfa13457 ("IB: Pass only ib_udata in function prototypes")
Link: https://lore.kernel.org/r/20200425233545.17210-1-sudipm.mukherjee@gmail.com
Link: https://lore.kernel.org/r/20200511183742.GB225608@mwanda
Cc: stable@vger.kernel.org [5.4+]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Following patch adds additional argument to the create AH function, so it
make sense to group ah_attr and flags arguments in struct.
Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Acked-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The commit below modified rvt_create_mmap_info() to return ERR_PTR's but
didn't update the callers to handle them. Modify rvt_create_mmap_info() to
only return ERR_PTR and fix all error checking after
rvt_create_mmap_info() was called.
Fixes: ff23dfa13457 ("IB: Pass only ib_udata in function prototypes")
Link: https://lore.kernel.org/r/20200424173146.10970-1-sudipm.mukherjee@gmail.com
Cc: stable@vger.kernel.org [5.4+]
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
siw_fastreg_mr() invokes siw_mem_id2obj(), which returns a local reference
of the siw_mem object to "mem" with increased refcnt. When
siw_fastreg_mr() returns, "mem" becomes invalid, so the refcount should be
decreased to keep refcount balanced.
The issue happens in one error path of siw_fastreg_mr(). When "base_mr"
equals to NULL but "mem" is not NULL, the function forgets to decrease the
refcnt increased by siw_mem_id2obj() and causes a refcnt leak.
Reorganize the flow so that the goto unwind can be used as expected.
Fixes: b9be6f18cf9e ("rdma/siw: transmit path")
Link: https://lore.kernel.org/r/1586939949-69856-1-git-send-email-xiyuyang19@fudan.edu.cn
Reported-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The RXE driver doesn't set vendor_id and user space applications see
zeros. This causes to pyverbs tests to fail with the following traceback,
because the expectation is to have valid vendor_id.
Traceback (most recent call last):
File "tests/test_device.py", line 51, in test_query_device
self.verify_device_attr(attr)
File "tests/test_device.py", line 77, in verify_device_attr
assert attr.vendor_id != 0
In order to fix it, we will set vendor_id 0XFFFFFF, according to the IBTA
v1.4 A3.3.1 VENDOR INFORMATION section.
"""
A vendor that produces a generic controller (i.e., one that supports a
standard I/O protocol such as SRP), which does not have vendor specific
device drivers, may use the value of 0xFFFFFF in the VendorID field.
"""
Before:
hca_id: rxe0
transport: InfiniBand (0)
fw_ver: 0.0.0
node_guid: 5054:00ff:feaa:5363
sys_image_guid: 5054:00ff:feaa:5363
vendor_id: 0x0000
After:
hca_id: rxe0
transport: InfiniBand (0)
fw_ver: 0.0.0
node_guid: 5054:00ff:feaa:5363
sys_image_guid: 5054:00ff:feaa:5363
vendor_id: 0xffffff
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200406173501.1466273-1-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Pull rdma updates from Jason Gunthorpe:
"The majority of the patches are cleanups, refactorings and clarity
improvements.
This cycle saw some more activity from Syzkaller, I think we are now
clean on all but one of those bugs, including the long standing and
obnoxious rdma_cm locking design defect. Continue to see many drivers
getting cleanups, with a few new user visible features.
Summary:
- Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1
- Lots of cleanup patches for hns
- Convert more places to use refcount
- Aggressively lock the RDMA CM code that syzkaller says isn't
working
- Work to clarify ib_cm
- Use the new ib_device lifecycle model in bnxt_re
- Fix mlx5's MR cache which seems to be failing more often with the
new ODP code
- mlx5 'dynamic uar' and 'tx steering' user interfaces"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (144 commits)
RDMA/bnxt_re: make bnxt_re_ib_init static
IB/qib: Delete struct qib_ivdev.qp_rnd
RDMA/hns: Fix uninitialized variable bug
RDMA/hns: Modify the mask of QP number for CQE of hip08
RDMA/hns: Reduce the maximum number of extend SGE per WQE
RDMA/hns: Reduce PFC frames in congestion scenarios
RDMA/mlx5: Add support for RDMA TX flow table
net/mlx5: Add support for RDMA TX steering
IB/hfi1: Call kobject_put() when kobject_init_and_add() fails
IB/hfi1: Fix memory leaks in sysfs registration and unregistration
IB/mlx5: Move to fully dynamic UAR mode once user space supports it
IB/mlx5: Limit the scope of struct mlx5_bfreg_info to mlx5_ib
IB/mlx5: Extend QP creation to get uar page index from user space
IB/mlx5: Extend CQ creation to get uar page index from user space
IB/mlx5: Expose UAR object and its alloc/destroy commands
IB/hfi1: Get rid of a warning
RDMA/hns: Remove redundant judgment of qp_type
RDMA/hns: Remove redundant assignment of wc->smac when polling cq
RDMA/hns: Remove redundant qpc setup operations
RDMA/hns: Remove meaningless prints
...
|
|
The RXE driver doesn't set sys_image_guid and user space applications see
zeros. This causes to pyverbs tests to fail with the following traceback,
because the IBTA spec requires to have valid sys_image_guid.
Traceback (most recent call last):
File "./tests/test_device.py", line 51, in test_query_device
self.verify_device_attr(attr)
File "./tests/test_device.py", line 74, in verify_device_attr
assert attr.sys_image_guid != 0
In order to fix it, set sys_image_guid to be equal to node_guid.
Before:
5: rxe0: ... node_guid 5054:00ff:feaa:5363 sys_image_guid
0000:0000:0000:0000
After:
5: rxe0: ... node_guid 5054:00ff:feaa:5363 sys_image_guid
5054:00ff:feaa:5363
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20200323112800.1444784-1-leon@kernel.org
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
drivers/infiniband/sw/siw/siw_qp_rx.c: In function siw_proc_send:
./include/linux/spinlock.h:288:3: warning: flags may be used uninitialized in this function [-Wmaybe-uninitialized]
_raw_spin_unlock_irqrestore(lock, flags); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/sw/siw/siw_qp_rx.c:335:16: note: flags was declared here
unsigned long flags;
Link: https://lore.kernel.org/r/20200323184627.ZWPg91uin%akpm@linux-foundation.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This routine was obsoleted by the patch below.
Delete it.
Fixes: a2a074ef396f ("RDMA: Handle ucontext allocations by IB/core")
Link: https://lore.kernel.org/r/20200316210454.7753.94689.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
When a kernel ULP requests the rdmavt to create a completion queue, it
allocated the queue and set cq->kqueue to point to it. However, when the
completion queue is destroyed, cq->queue is freed instead, leading to a
memory leak:
https://lore.kernel.org/r/215235485.15264050.1583334487658.JavaMail.zimbra@redhat.com
unreferenced object 0xffffc90006639000 (size 12288):
comm "kworker/u128:0", pid 8, jiffies 4295777598 (age 589.085s)
hex dump (first 32 bytes):
4d 00 00 00 4d 00 00 00 00 c0 08 ac 8b 88 ff ff M...M...........
00 00 00 00 80 00 00 00 00 00 00 00 10 00 00 00 ................
backtrace:
[<0000000035a3d625>] __vmalloc_node_range+0x361/0x720
[<000000002942ce4f>] __vmalloc_node.constprop.30+0x63/0xb0
[<00000000f228f784>] rvt_create_cq+0x98a/0xd80 [rdmavt]
[<00000000b84aec66>] __ib_alloc_cq_user+0x281/0x1260 [ib_core]
[<00000000ef3764be>] nvme_rdma_cm_handler+0xdb7/0x1b80 [nvme_rdma]
[<00000000936b401c>] cma_cm_event_handler+0xb7/0x550 [rdma_cm]
[<00000000d9c40b7b>] addr_handler+0x195/0x310 [rdma_cm]
[<00000000c7398a03>] process_one_req+0xdd/0x600 [ib_core]
[<000000004d29675b>] process_one_work+0x920/0x1740
[<00000000efedcdb5>] worker_thread+0x87/0xb40
[<000000005688b340>] kthread+0x327/0x3f0
[<0000000043a168d6>] ret_from_fork+0x3a/0x50
This patch fixes the issue by freeing cq->kqueue instead.
Fixes: 239b0e52d8aa ("IB/hfi1: Move rvt_cq_wc struct into uapi directory")
Link: https://lore.kernel.org/r/20200313123957.14343.43879.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org> # 5.4.x
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
A failing call to ib_device_set_netdev() during device creation caused
system crash due to xa_destroy of uninitialized xarray hit by device
deallocation. Fixed by moving xarray initialization before potential
device deallocation.
Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Link: https://lore.kernel.org/r/20200302155814.9896-1-bmt@zurich.ibm.com
Reported-by: syzbot+2e80962bedd9559fe0b3@syzkaller.appspotmail.com
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Holding the rtnl_lock while iterating a devices interface address list
potentially causes deadlocks with the cma_netdev_callback. While this was
implemented to limit the scope of a wildcard listen to addresses of the
current device only, a better solution limits the scope of the socket to
the device. This completely avoiding locking, and also results in
significant code simplification.
Fixes: c421651fa229 ("RDMA/siw: Add missing rtnl_lock around access to ifa")
Link: https://lore.kernel.org/r/20200228173534.26815-1-bmt@zurich.ibm.com
Reported-by: syzbot+55de90ab5f44172b0c90@syzkaller.appspotmail.com
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The proper return code is "-EOPNOTSUPP" when the requested QP type is
not supported by the provider.
Link: https://lore.kernel.org/r/20200130082049.463-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|