aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/sw (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-01-12RDMA/rxe: Add check for supported QP typesXiao Yang1-0/+11
Current rdma_rxe only supports five QP types, attempting to create any others should return an error - the type check was missed. Link: https://lore.kernel.org/r/20201216071755.149449-2-yangx.jy@cn.fujitsu.com Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-08RDMA/siw: Fix handling of zero-sized Read and Receive Queues.Bernard Metzler5-146/+177
During connection setup, the application may choose to zero-size inbound and outbound READ queues, as well as the Receive queue. This patch fixes handling of zero-sized queues, but not prevents it. Kamal Heib says in an initial error report: When running the blktests over siw the following shift-out-of-bounds is reported, this is happening because the passed IRD or ORD from the ulp could be zero which will lead to unexpected behavior when calling roundup_pow_of_two(), fix that by blocking zero values of ORD or IRD. UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 20 PID: 3957 Comm: kworker/u64:13 Tainted: G S 5.10.0-rc6 #2 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: dump_stack+0x99/0xcb ubsan_epilogue+0x5/0x40 __ubsan_handle_shift_out_of_bounds.cold.11+0xb4/0xf3 ? down_write+0x183/0x3d0 siw_qp_modify.cold.8+0x2d/0x32 [siw] ? __local_bh_enable_ip+0xa5/0xf0 siw_accept+0x906/0x1b60 [siw] ? xa_load+0x147/0x1f0 ? siw_connect+0x17a0/0x17a0 [siw] ? lock_downgrade+0x700/0x700 ? siw_get_base_qp+0x1c2/0x340 [siw] ? _raw_spin_unlock_irqrestore+0x39/0x40 iw_cm_accept+0x1f4/0x430 [iw_cm] rdma_accept+0x3fa/0xb10 [rdma_cm] ? check_flush_dependency+0x410/0x410 ? cma_rep_recv+0x570/0x570 [rdma_cm] nvmet_rdma_queue_connect+0x1a62/0x2680 [nvmet_rdma] ? nvmet_rdma_alloc_cmds+0xce0/0xce0 [nvmet_rdma] ? lock_release+0x56e/0xcc0 ? lock_downgrade+0x700/0x700 ? lock_downgrade+0x700/0x700 ? __xa_alloc_cyclic+0xef/0x350 ? __xa_alloc+0x2d0/0x2d0 ? rdma_restrack_add+0xbe/0x2c0 [ib_core] ? __ww_mutex_die+0x190/0x190 cma_cm_event_handler+0xf2/0x500 [rdma_cm] iw_conn_req_handler+0x910/0xcb0 [rdma_cm] ? _raw_spin_unlock_irqrestore+0x39/0x40 ? trace_hardirqs_on+0x1c/0x150 ? cma_ib_handler+0x8a0/0x8a0 [rdma_cm] ? __kasan_kmalloc.constprop.7+0xc1/0xd0 cm_work_handler+0x121c/0x17a0 [iw_cm] ? iw_cm_reject+0x190/0x190 [iw_cm] ? trace_hardirqs_on+0x1c/0x150 process_one_work+0x8fb/0x16c0 ? pwq_dec_nr_in_flight+0x320/0x320 worker_thread+0x87/0xb40 ? __kthread_parkme+0xd1/0x1a0 ? process_one_work+0x16c0/0x16c0 kthread+0x35f/0x430 ? kthread_mod_delayed_work+0x180/0x180 ret_from_fork+0x22/0x30 Fixes: a531975279f3 ("rdma/siw: main include file") Fixes: f29dd55b0236 ("rdma/siw: queue pair methods") Fixes: 8b6a361b8c48 ("rdma/siw: receive path") Fixes: b9be6f18cf9e ("rdma/siw: transmit path") Fixes: 303ae1cdfdf7 ("rdma/siw: application interface") Link: https://lore.kernel.org/r/20210108125845.1803-1-bmt@zurich.ibm.com Reported-by: Kamal Heib <kamalheib1@gmail.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-07RDMA: Convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Link: https://lore.kernel.org/r/20201214134118.4349-1-zhengyongjun3@huawei.com Link: https://lore.kernel.org/r/20201214134146.4456-1-zhengyongjun3@huawei.com Link: https://lore.kernel.org/r/20201214134218.4510-1-zhengyongjun3@huawei.com Link: https://lore.kernel.org/r/20201214134243.4563-1-zhengyongjun3@huawei.com Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-11RDMA/rxe: Use acquire/release for memory orderingBob Pearson3-50/+60
Change work and completion queues to use smp_load_acquire() and smp_store_release() to synchronize between driver and users. This commit goes with a matching series of commits in the rxe user space provider. Link: https://lore.kernel.org/r/20201210174258.5234-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-07IB: Fix kernel-doc markupsMauro Carvalho Chehab3-11/+11
Some functions have different names between their prototypes and the kernel-doc markup. Others need to be fixed, as kernel-doc markups should use this format: identifier - description Link: https://lore.kernel.org/r/78b98c41a5a0f4c0106433d305b143028a4168b0.1606823973.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-23RDMA/siw,rxe: Make emulated devices virtual in the device treeJason Gunthorpe3-28/+1
This moves siw and rxe to be virtual devices in the device tree: lrwxrwxrwx 1 root root 0 Nov 6 13:55 /sys/class/infiniband/rxe0 -> ../../devices/virtual/infiniband/rxe0/ Previously they were trying to parent themselves to the physical device of their attached netdev, which doesn't make alot of sense. My hope is this will solve some weird syzkaller hits related to sysfs as it could be possible that the parent of a netdev is another netdev, eg under bonding or some other syzkaller found netdev configuration. Nesting a ib_device under anything but a physical device is going to cause inconsistencies in sysfs during destructions. Link: https://lore.kernel.org/r/0-v1-dcbfc68c4b4a+d6-virtual_dev_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-17RDMA/core: remove use of dma_virt_opsChristoph Hellwig9-31/+2
Use the ib_dma_* helpers to skip the DMA translation instead. This removes the last user if dma_virt_ops and keeps the weird layering violation inside the RDMA core instead of burderning the DMA mapping subsystems with it. This also means the software RDMA drivers now don't have to mess with DMA parameters that are not relevant to them at all, and that in the future we can use PCI P2P transfers even for software RDMA, as there is no first fake layer of DMA mapping that the P2P DMA support. Link: https://lore.kernel.org/r/20201106181941.1878556-8-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-17Merge branch 'for-rc' into rdma.gitJason Gunthorpe8-12/+51
From https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git The rc RDMA branch is needed due to dependencies on the next patches. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-12RMDA/sw: Don't allow drivers using dma_virt_ops on highmem configsChristoph Hellwig3-2/+4
dma_virt_ops requires that all pages have a kernel virtual address. Introduce a INFINIBAND_VIRT_DMA Kconfig symbol that depends on !HIGHMEM and make all three drivers depend on the new symbol. Also remove the ARCH_DMA_ADDR_T_64BIT dependency, which has been obsolete since commit 4965a68780c5 ("arch: define the ARCH_DMA_ADDR_T_64BIT config symbol in lib/Kconfig") Fixes: 551199aca1c3 ("lib/dma-virt: Add dma_virt_ops") Link: https://lore.kernel.org/r/20201106181941.1878556-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-12RDMA/rxe: Remove VLAN code leftovers from RXEZhu Yanjun2-14/+0
Since the commit fd49ddaf7e26 ("RDMA/rxe: prevent rxe creation on top of vlan interface") does not permit rxe on top of vlan device, all the stuff related with vlan should be removed. Fixes: fd49ddaf7e26 ("RDMA/rxe: prevent rxe creation on top of vlan interface") Link: https://lore.kernel.org/r/1604326422-18625-1-git-send-email-yanjunz@nvidia.com Signed-off-by: Zhu Yanjun <yanjunz@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-02RDMA/rxe,siw: Restore uverbs_cmd_mask IB_USER_VERBS_CMD_POST_SENDJason Gunthorpe2-1/+4
These two drivers open code the call to POST_SEND and do not use the rdma-core wrapper to do it, thus their usages was missed during the audit. Both drivers use this as a doorbell to signal the kernel to start DMA. Fixes: 628c02bf38aa ("RDMA: Remove uverbs cmds from drivers that don't use them") Link: https://lore.kernel.org/r/0-v1-4608c5610afa+fb-uverbs_cmd_post_send_fix_jgg@nvidia.com Reported-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-02RDMA/siw: Fix typo of EAGAIN not -EAGAIN in siw_cm_work_handler()Zhang Qilong1-1/+1
The rv cannot be 'EAGAIN' in the previous path, we should use '-EAGAIN' to check it. For example: Call trace: ->siw_cm_work_handler ->siw_proc_mpareq ->siw_recv_mpa_rr Link: https://lore.kernel.org/r/20201028122509.47074-1-zhangqilong3@huawei.com Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-02RDMA: Fix software RDMA drivers for dma mapping errorParav Pandit3-5/+15
The commit f959dcd6ddfd ("dma-direct: Fix potential NULL pointer dereference") made dma_mask as mandetory field to be setup even for dma_virt_ops based dma devices. The commit in the fixes tag omitted setting up the dma_mask on virtual devices triggering the below trace when they were combined during the merge window. Fix it by setting empty DMA MASK for software based RDMA devices. WARNING: CPU: 1 PID: 8488 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x493/0x700 CPU: 1 PID: 8488 Comm: syz-executor144 Not tainted 5.9.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:dma_map_page_attrs+0x493/0x700 kernel/dma/mapping.c:149 Trace: dma_map_single_attrs include/linux/dma-mapping.h:279 [inline] ib_dma_map_single include/rdma/ib_verbs.h:3967 [inline] ib_mad_post_receive_mads+0x23f/0xd60 drivers/infiniband/core/mad.c:2715 ib_mad_port_start drivers/infiniband/core/mad.c:2862 [inline] ib_mad_port_open drivers/infiniband/core/mad.c:3016 [inline] ib_mad_init_device+0x72b/0x1400 drivers/infiniband/core/mad.c:3092 add_client_context+0x405/0x5e0 drivers/infiniband/core/device.c:680 enable_device_and_get+0x1d5/0x3c0 drivers/infiniband/core/device.c:1301 ib_register_device drivers/infiniband/core/device.c:1376 [inline] ib_register_device+0x7a7/0xa40 drivers/infiniband/core/device.c:1335 rxe_register_device+0x46d/0x570 drivers/infiniband/sw/rxe/rxe_verbs.c:1182 rxe_add+0x12fe/0x16d0 drivers/infiniband/sw/rxe/rxe.c:247 rxe_net_add+0x8c/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:507 rxe_newlink drivers/infiniband/sw/rxe/rxe.c:269 [inline] rxe_newlink+0xb7/0xe0 drivers/infiniband/sw/rxe/rxe.c:250 nldev_newlink+0x30e/0x540 drivers/infiniband/core/nldev.c:1555 rdma_nl_rcv_msg+0x367/0x690 drivers/infiniband/core/netlink.c:195 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x2f2/0x440 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x443699 Link: https://lore.kernel.org/r/20201030093803.278830-1-parav@nvidia.com Reported-by: syzbot+34dc2fea3478e659af01@syzkaller.appspotmail.com Fixes: e0477b34d9d1 ("RDMA: Explicitly pass in the dma_device to ib_register_device") Signed-off-by: Parav Pandit <parav@nvidia.com> Tested-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Zhu Yanjun <yanjunz@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-28RDMA/rxe: Compute PSN windows correctlyBob Pearson1-1/+2
The code which limited the number of unacknowledged PSNs was incorrect. The PSNs are limited to 24 bits and wrap back to zero from 0x00ffffff. The test was computing a 32 bit value which wraps at 32 bits so that qp->req.psn can appear smaller than the limit when it is actually larger. Replace '>' test with psn_compare which is used for other PSN comparisons and correctly handles the 24 bit size. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20201013170741.3590-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA/rxe: Remove unused RXE_MR_TYPE_FMRBob Pearson2-2/+0
This is a left over from the past. It is no longer used. Link: https://lore.kernel.org/r/20201009165112.271143-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Convert sysfs device * show functions to use sysfs_emit()Joe Perches1-1/+1
Done with cocci script: @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - sprintf(buf, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - strcpy(buf, chr); + sysfs_emit(buf, chr); ...> } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - sprintf(buf, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... - len += scnprintf(buf + len, PAGE_SIZE - len, + len += sysfs_emit_at(buf, len, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { ... - strcpy(buf, chr); - return strlen(buf); + return sysfs_emit(buf, chr); } Link: https://lore.kernel.org/r/7f406fa8e3aa2552c022bec680f621e38d1fe414.1602122879.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Remove AH from uverbs_cmd_maskJason Gunthorpe3-12/+3
Drivers that need a uverbs AH should instead set the create_user_ah() op similar to reg_user_mr(). MODIFY_AH and QUERY_AH cmds were never implemented so are just deleted. Link: https://lore.kernel.org/r/11-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Remove uverbs cmds from drivers that don't use themJason Gunthorpe2-12/+1
Allowing userspace to invoke these commands is probably going to crash these drivers as they are not tested and not expecting to use them on a user object. For example pvrdma touches cq->ring_state which is not initialized for user QPs. These commands are effected: - IB_USER_VERBS_CMD_REQ_NOTIFY_CQ is ibv_cmd_req_notify_cq() in rdma-core, only hfi1, ipath and rxe calls it. - IB_USER_VERBS_CMD_POLL_CQ is ibv_cmd_poll_cq() in rdma-core, only ipath and hfi1 calls it. - IB_USER_VERBS_CMD_POST_SEND/RECV is ibv_cmd_post_send/recv() in rdma-core, only ipath and hfi1 call them. - IB_USER_VERBS_CMD_POST_SRQ_RECV is ibv_cmd_post_srq_recv() in rdma-core, only ipath and hfi1 calls it. - IB_USER_VERBS_CMD_PEEK_CQ isn't even implemented anywhere - IB_USER_VERBS_CMD_CREATE/DESTROY_AH is ibv_cmd_create/destroy_ah() in rdma-core, only bnxt_re, efa, hfi1, ipath, mlx5, orcrdma, and rxe call it. Link: https://lore.kernel.org/r/10-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Check create_flags during create_qpJason Gunthorpe3-3/+10
Each driver should check that the QP attrs create_flags is supported. Unfortuantely when create_flags was added to the QP attrs the drivers were not updated. uverbs_ex_cmd_mask was used to block it - even though kernel drivers use these flags too. Check that flags is zero in all drivers that don't use it, remove IB_USER_VERBS_EX_CMD_CREATE_QP from uverbs_ex_cmd_mask. Fix the error code to be EOPNOTSUPP. Link: https://lore.kernel.org/r/8-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Check flags during create_cqJason Gunthorpe3-2/+5
Each driver should check that the CQ attrs is supported. Unfortuantely when flags was added to the CQ attrs the drivers were not updated, uverbs_ex_cmd_mask was used to block it. This was missed when create CQ was converted to ioctl, so non-zero flags could have been passed into drivers. Check that flags is zero in all drivers that don't use it, remove IB_USER_VERBS_EX_CMD_CREATE_CQ from uverbs_ex_cmd_mask. Fixes: 41b2a71fc848 ("IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new file") Link: https://lore.kernel.org/r/7-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Check attr_mask during modify_qpJason Gunthorpe3-0/+9
Each driver should check that it can support the provided attr_mask during modify_qp. IB_USER_VERBS_EX_CMD_MODIFY_QP was being used to block modify_qp_ex because the driver didn't check RATE_LIMIT. Link: https://lore.kernel.org/r/6-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Check srq_type during create_srqJason Gunthorpe2-0/+6
uverbs was blocking srq_types the driver doesn't support based on the CREATE_XSRQ cmd_mask. Fix all drivers to check for supported srq_types during create_srq and move CREATE_XSRQ to the core code. Link: https://lore.kernel.org/r/5-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Move more uverbs_cmd_mask settings to the coreJason Gunthorpe3-20/+2
These functions all depend on the driver providing a specific op: - REREG_MR is rereg_user_mr(). bnxt_re set this without providing the op - ATTACH/DEATCH_MCAST is attach_mcast()/detach_mcast(). usnic set this without providing the op - OPEN_QP doesn't involve the driver but requires a XRCD. qedr provides xrcd but forgot to set it, usnic doesn't provide XRCD but set it anyhow. - OPEN/CLOSE_XRCD are the ops alloc_xrcd()/dealloc_xrcd() - CREATE_SRQ/DESTROY_SRQ are the ops create_srq()/destroy_srq() - QUERY/MODIFY_SRQ is op query_srq()/modify_srq(). hns sets this but sometimes supplies a NULL op. - RESIZE_CQ is op resize_cq(). bnxt_re sets this boes doesn't supply an op - ALLOC/DEALLOC_MW is alloc_mw()/dealloc_mw(). cxgb4 provided an (now deleted) implementation but no userspace All drivers were checked that no drivers provide the op without also setting uverbs_cmd_mask so this should have no functional change. Link: https://lore.kernel.org/r/4-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Remove elements in uverbs_cmd_mask that all drivers setJason Gunthorpe3-45/+4
This is a step toward eliminating uverbs_cmd_mask. Preset this list in the core code. Only the op reg_user_mr wasn't already being required from the drivers. Link: https://lore.kernel.org/r/3-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA/rxe: Fix small problem in network_type patchBob Pearson2-5/+32
The patch referenced below has a typo that results in using the wrong L2 header size for outbound traffic. (V4 <-> V6). It also breaks kernel-side RC traffic because they use AVs that use RDMA_NETWORK_XXX enums instead of RXE_NETWORK_TYPE_XXX enums. Fix this by transcoding between these enum types. Fixes: e0d696d201dd ("RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI") Link: https://lore.kernel.org/r/20201016211343.22906-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-17Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds44-1050/+162
Pull rdma updates from Jason Gunthorpe: "A usual cycle for RDMA with a typical mix of driver and core subsystem updates: - Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma, hns, usnic, qib, qedr, cxgb4, hns, bnxt_re - Various rtrs fixes and updates - Bug fix for mlx4 CM emulation for virtualization scenarios where MRA wasn't working right - Use tracepoints instead of pr_debug in the CM code - Scrub the locking in ucma and cma to close more syzkaller bugs - Use tasklet_setup in the subsystem - Revert the idea that 'destroy' operations are not allowed to fail at the driver level. This proved unworkable from a HW perspective. - Revise how the umem API works so drivers make fewer mistakes using it - XRC support for qedr - Convert uverbs objects RWQ and MW to new the allocation scheme - Large queue entry sizes for hns - Use hmm_range_fault() for mlx5 On Demand Paging - uverbs APIs to inspect the GID table instead of sysfs - Move some of the RDMA code for building large page SGLs into lib/scatterlist" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (191 commits) RDMA/ucma: Fix use after free in destroy id flow RDMA/rxe: Handle skb_clone() failure in rxe_recv.c RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI RDMA: Explicitly pass in the dma_device to ib_register_device lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values IB/mlx4: Convert rej_tmout radix-tree to XArray RDMA/rxe: Fix bug rejecting all multicast packets RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt() RDMA/rxe: Remove duplicate entries in struct rxe_mr IB/hfi,rdmavt,qib,opa_vnic: Update MAINTAINERS IB/rdmavt: Fix sizeof mismatch MAINTAINERS: CISCO VIC LOW LATENCY NIC DRIVER RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl. RDMA/bnxt_re: Use rdma_umem_for_each_dma_block() RDMA/umem: Move to allocate SG table from pages lib/scatterlist: Add support in dynamic allocation of SG table from pages tools/testing/scatterlist: Show errors in human readable form tools/testing/scatterlist: Rejuvenate bit-rotten test RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces RDMA/uverbs: Expose the new GID query API to user space ...
2020-10-16RDMA/rxe: Handle skb_clone() failure in rxe_recv.cBob Pearson1-0/+3
If skb_clone() is unable to allocate memory for a new sk_buff this is not detected by the current code. Check for a NULL return and continue. This is similar to other errors in this loop over QPs attached to the multicast address and consistent with the unreliable UD transport. Fixes: e7ec96fc7932f ("RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()") Addresses-Coverity-ID: 1497804: Null pointer dereferences (NULL_RETURNS) Link: https://lore.kernel.org/r/20201013184236.5231-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-16RDMA/rxe: Move the definitions for rxe_av.network_type to uAPIJason Gunthorpe1-4/+4
RXE was wrongly using an internal kernel enum as part of its uAPI, split this out into a dedicated uAPI enum just for RXE. It only uses the IPv4 and IPv6 values. This was exposed by changing the internal kernel enum definition which broke RXE. Fixes: 1c15b4f2a42f ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-16RDMA: Explicitly pass in the dma_device to ib_register_deviceJason Gunthorpe3-12/+11
The code in setup_dma_device has become rather convoluted, move all of this to the drivers. Drives now pass in a DMA capable struct device which will be used to setup DMA, or drivers must fully configure the ibdev for DMA and pass in NULL. Other than setting the masks in rvt all drivers were doing this already anyhow. mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for DMA based on their hardweare limits in: __mthca_init_one() dma_set_max_seg_size (1G) __mlx4_init_one() dma_set_max_seg_size (1G) mlx5_pci_init() set_dma_caps() dma_set_max_seg_size (2G) Other non software drivers (except usnic) were extended to UINT_MAX [1, 2] instead of 2G as was before. [1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/ [2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/ Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-10-08RDMA/rxe: Fix bug rejecting all multicast packetsBob Pearson1-3/+16
Fix a bug in rxe_rcv() that causes all multicast packets to be dropped. Currently rxe_match_dgid() is called for each packet to verify that the destination IP address matches one of the entries in the port source GID table. This is incorrect for IP multicast addresses since they do not appear in the GID table. Add code to detect multicast addresses. Change function name to rxe_chk_dgid() which is clearer. Link: https://lore.kernel.org/r/20201008212753.265249-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-08RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()Bob Pearson1-5/+12
The changes referenced below replaced sbk_clone)_ by taking additional references, passing the skb along and then freeing the skb. This deleted the packets before they could be processed and additionally passed bad data in each packet. Since pkt is stored in skb->cb changing pkt->qp changed it for all the packets. Replace skb_get() by sbk_clone() in rxe_rcv_mcast_pkt() for cases where multiple QPs are receiving multicast packets on the same address. Delete kfree_skb() because the packets need to live until they have been processed by each QP. They are freed later. Fixes: 86af61764151 ("IB/rxe: remove unnecessary skb_clone") Fixes: fe896ceb5772 ("IB/rxe: replace refcount_inc with skb_get") Link: https://lore.kernel.org/r/20201008203651.256958-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-08RDMA/rxe: Remove duplicate entries in struct rxe_mrBob Pearson4-22/+28
Struct rxe_mem had pd, lkey and rkey values both in itself and in the struct ib_mr which is also included in rxe_mem. Delete these entries and replace references with the ones in ibmr.Add mr_pd, mr_lkey and mr_rkey macros which extract these values from mr. Link: https://lore.kernel.org/r/20201008212818.265303-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-08IB/rdmavt: Fix sizeof mismatchColin Ian King1-3/+1
An incorrect sizeof is being used, struct rvt_ibport ** is not correct, it should be struct rvt_ibport *. Note that since ** is the same size as * this is not causing any issues. Improve this fix by using sizeof(*rdi->ports) as this allows us to not even reference the type of the pointer. Also remove line breaks as the entire statement can fit on one line. Link: https://lore.kernel.org/r/20201008095204.82683-1-colin.king@canonical.com Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)") Fixes: ff6acd69518e ("IB/rdmavt: Add device structure allocation") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-06percpu_ref: reduce memory footprint of percpu_ref in fast pathMing Lei1-1/+1
'struct percpu_ref' is often embedded into one user structure, and the instance is usually referenced in fast path, however actually only 'percpu_count_ptr' is needed in fast path. So move other fields into one new structure of 'percpu_ref_data', and allocate it dynamically via kzalloc(), then memory footprint of 'percpu_ref' in fast path is reduced a lot and becomes suitable to put into hot cacheline of user structure. Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Veronika Kabatova <vkabatov@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Tejun Heo <tj@kernel.org> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-18Merge branch 'mlx5_active_speed' into rdma.git for-nextJason Gunthorpe5-1/+13
Leon Romanovsky says: ==================== IBTA declares speed as 16 bits, but kernel stores it in u8. This series fixes in-kernel declaration while keeping external interface intact. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux due to dependencies. * branch 'mlx5_active_speed': RDMA: Fix link active_speed size RDMA/mlx5: Delete duplicated mlx5_ptys_width enum net/mlx5: Refactor query port speed functions
2020-09-11Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds5-1/+13
Pull rdma fixes from Jason Gunthorpe: "A number of driver bug fixes and a few recent regressions: - Several bug fixes for bnxt_re. Crashing, incorrect data reported, and corruption on new HW - Memory leak and crash in rxe - Fix sysfs corruption in rxe if the netdev name is too long - Fix a crash on error unwind in the new cq_pool code - Fix kobject panics in rtrs by working device lifetime properly - Fix a data corruption bug in iser target related to misaligned buffers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/isert: Fix unaligned immediate-data handling RDMA/rtrs-srv: Set .release function for rtrs srv device during device init RDMA/bnxt_re: Remove set but not used variable 'qplib_ctx' RDMA/core: Fix reported speed and width RDMA/core: Fix unsafe linked list traversal after failing to allocate CQ RDMA/bnxt_re: Remove the qp from list only if the qp destroy succeeds RDMA/bnxt_re: Fix driver crash on unaligned PSN entry address RDMA/bnxt_re: Restrict the max_gids to 256 RDMA/bnxt_re: Static NQ depth allocation RDMA/bnxt_re: Fix the qp table indexing RDMA/bnxt_re: Do not report transparent vlan from QP1 RDMA/mlx4: Read pkey table length instead of hardcoded value RDMA/rxe: Fix panic when calling kmem_cache_create() RDMA/rxe: Fix memleak in rxe_mem_init_user RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars RDMA/rtrs-srv: Replace device_register with device_initialize and device_add
2020-09-09RDMA: Allow fail of destroy CQLeon Romanovsky5-5/+8
Like any other verbs objects, CQ shouldn't fail during destroy, but mlx5_ib didn't follow this contract with mixed IB verbs objects with DEVX. Such mix causes to the situation where FW and kernel are fully interdependent on the reference counting of each side. Kernel verbs and drivers that don't have DEVX flows shouldn't fail. Fixes: e39afe3d6dbd ("RDMA: Convert CQ allocations to be under core responsibility") Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA: Restore ability to fail on SRQ destroyLeon Romanovsky5-5/+8
In similar way to other IB objects, restore the ability to return error on SRQ destroy. Strictly speaking, this change is not necessary, and provided here to ensure a symmetrical interface like other destroy functions. Fixes: 68e326dea1db ("RDMA: Handle SRQ allocations by IB/core") Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA: Restore ability to fail on AH destroyLeon Romanovsky3-3/+5
Like any other IB verbs objects, AH are refcounted by ib_core. The release of those objects are controlled by ib_core with promise that AH destroy can't fail. Being SW object for now, this change makes dealloc_ah() to behave like any other destroy IB flows. Fixes: d345691471b4 ("RDMA: Handle AH allocations by IB/core") Link: https://lore.kernel.org/r/20200907120921.476363-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA: Restore ability to fail on PD deallocateLeon Romanovsky5-5/+8
The IB verbs objects are counted by the kernel and ib_core ensures that deallocate PD will success so it will be called once all other objects that depends on PD will be released. This is achieved by managing various reference counters on such objects. The mlx5 driver didn't follow this standard flow when allowed DEVX objects that are not managed by ib_core to be interleaved with the ones under ib_core responsibility. In such interleaved scenarios deallocate command can fail and ib_core will leave uobject in internal DB and attempt to clean it later to free resources anyway. This change partially restores returned value from dealloc_pd() for all drivers, but keeping in mind that non-DEVX devices and kernel verbs paths shouldn't fail. Fixes: 21a428a019c9 ("RDMA: Handle PD allocations by IB/core") Link: https://lore.kernel.org/r/20200907120921.476363-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-03RDMA/rxe: Convert tasklets to use new tasklet_setup() APIAllen Pais3-8/+8
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Link: https://lore.kernel.org/r/20200903060637.424458-6-allen.lkml@gmail.com Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-31Merge tag 'v5.9-rc3' into rdma.git for-nextJason Gunthorpe7-10/+8
Required due to dependencies in following patches. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-31RDMA/rxe: Address an issue with hardened user copyBob Pearson3-73/+2
Change rxe pools to use kzalloc instead of kmem_cache to allocate memory for rxe objects. The pools are not really necessary and they trigger hardened user copy warnings as the ioctl framework copies the QP number directly to userspace. Also the general project to move object alloation to the core code will eventually clean these out anyhow. Link: https://lore.kernel.org/r/20200827163535.2632-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-31RDMA/rxe: Add SPDX hdrs to rxe source filesBob Pearson32-896/+32
Add SPDX headers to all rxe .c and .h files. Link: https://lore.kernel.org/r/20200827145439.2273-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/rxe: Fix style warningsBob Pearson4-6/+4
Fixed several minor checkpatch warnings in existing rxe source. Link: https://lore.kernel.org/r/20200820224638.3212-3-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/rxe: Fix panic when calling kmem_cache_create()Kamal Heib3-0/+11
To avoid the following kernel panic when calling kmem_cache_create() with a NULL pointer from pool_cache(), Block the rxe_param_set_add() from running if the rdma_rxe module is not initialized. BUG: unable to handle kernel NULL pointer dereference at 000000000000000b PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 4 PID: 8512 Comm: modprobe Kdump: loaded Not tainted 4.18.0-231.el8.x86_64 #1 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 10/02/2018 RIP: 0010:kmem_cache_alloc+0xd1/0x1b0 Code: 8b 57 18 45 8b 77 1c 48 8b 5c 24 30 0f 1f 44 00 00 5b 48 89 e8 5d 41 5c 41 5d 41 5e 41 5f c3 81 e3 00 00 10 00 75 0e 4d 89 fe <41> f6 47 0b 04 0f 84 6c ff ff ff 4c 89 ff e8 cc da 01 00 49 89 c6 RSP: 0018:ffffa2b8c773f9d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000005 RDX: 0000000000000004 RSI: 00000000006080c0 RDI: 0000000000000000 RBP: ffff8ea0a8634fd0 R08: ffffa2b8c773f988 R09: 00000000006000c0 R10: 0000000000000000 R11: 0000000000000230 R12: 00000000006080c0 R13: ffffffffc0a97fc8 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f9138ed9740(0000) GS:ffff8ea4ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000000b CR3: 000000046d59a000 CR4: 00000000003406e0 Call Trace: rxe_alloc+0xc8/0x160 [rdma_rxe] rxe_get_dma_mr+0x25/0xb0 [rdma_rxe] __ib_alloc_pd+0xcb/0x160 [ib_core] ib_mad_init_device+0x296/0x8b0 [ib_core] add_client_context+0x11a/0x160 [ib_core] enable_device_and_get+0xdc/0x1d0 [ib_core] ib_register_device+0x572/0x6b0 [ib_core] ? crypto_create_tfm+0x32/0xe0 ? crypto_create_tfm+0x7a/0xe0 ? crypto_alloc_tfm+0x58/0xf0 rxe_register_device+0x19d/0x1c0 [rdma_rxe] rxe_net_add+0x3d/0x70 [rdma_rxe] ? dev_get_by_name_rcu+0x73/0x90 rxe_param_set_add+0xaf/0xc0 [rdma_rxe] parse_args+0x179/0x370 ? ref_module+0x1b0/0x1b0 load_module+0x135e/0x17e0 ? ref_module+0x1b0/0x1b0 ? __do_sys_init_module+0x13b/0x180 __do_sys_init_module+0x13b/0x180 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f9137ed296e This can be triggered if a user tries to use the 'module option' which is not actually a real module option but some idiotic (and thankfully no obsolete) sysfs interface. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200825151725.254046-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/rxe: Fix memleak in rxe_mem_init_userDinghao Liu1-0/+1
When page_address() fails, umem should be freed just like when rxe_mem_alloc() fails. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200819075632.22285-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24RDMA/rxe: prevent rxe creation on top of vlan interfaceMohammad Heib2-0/+12
Creating rxe device on top of vlan interface will create a non-functional device that has an empty gids table and can't be used for rdma cm communication. This is caused by the logic in enum_all_gids_of_dev_cb()/is_eth_port_of_netdev(), which only considers networks connected to "upper devices" of the configured network device, resulting in an empty set of gids for a vlan interface, and attempts to connect via this rdma device fail in cm_init_av_for_response because no gids can be resolved. Apparently, this behavior was implemented to fit the HW-RoCE devices that create RoCE device per port, therefore RXE must behave the same like HW-RoCE devices and create rxe device per real device only. In order to communicate via a vlan interface, the user must use the gid index of the vlan address instead of creating rxe over vlan. Link: https://lore.kernel.org/r/20200811150415.3693-1-goody698@gmail.com Signed-off-by: Mohammad Heib <goody698@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24RDMA/rxe: Fix the parent sysfs read when the interface has 15 charsYi Zhang1-1/+1
'parent' sysfs reads will yield '\0' bytes when the interface name has 15 chars, and there will no "\n" output. To reproduce, create one interface with 15 chars: [root@test ~]# ip a s enp0s29u1u7u3c2 2: enp0s29u1u7u3c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000 link/ether 02:21:28:57:47:17 brd ff:ff:ff:ff:ff:ff inet6 fe80::ac41:338f:5bcd:c222/64 scope link noprefixroute valid_lft forever preferred_lft forever [root@test ~]# modprobe rdma_rxe [root@test ~]# echo enp0s29u1u7u3c2 > /sys/module/rdma_rxe/parameters/add [root@test ~]# cat /sys/class/infiniband/rxe0/parent enp0s29u1u7u3c2[root@test ~]# [root@test ~]# f="/sys/class/infiniband/rxe0/parent" [root@test ~]# echo "$(<"$f")" -bash: warning: command substitution: ignored null byte in input enp0s29u1u7u3c2 Use scnprintf and PAGE_SIZE to fill the sysfs output buffer. Cc: stable@vger.kernel.org Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200820153646.31316-1-yi.zhang@redhat.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.