aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/sw (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-07-22RDMA/siw: Fix error return code in siw_init_module()Wei Yongjun1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface") Link: https://lore.kernel.org/r/20190718092710.85709-1-weiyongjun1@huawei.com Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-12RMDA/siw: Require a 64 bit archJason Gunthorpe1-1/+1
The new siw driver fails to build on i386 with drivers/infiniband/sw/siw/siw_qp.c:1025:3: error: invalid output size for constraint '+q' smp_store_mb(*cq->notify, SIW_NOTIFY_NOT); As it is using 64 bit values with the smp_store_mb. Since the entire scheme here seems questionable, and we are in the merge window, fix the compile failures by disabling 32 bit support on this driver. A proper fix will be reviewed post merge window. Fixes: c0cf5bdde46c ("rdma/siw: addition to kernel build environment") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-11RDMA/siw: Mark expected switch fall-throughsGustavo A. R. Silva2-0/+6
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/infiniband/sw/siw/siw_qp_rx.c: In function ‘siw_rdmap_complete’: drivers/infiniband/sw/siw/siw_qp_rx.c:1214:18: warning: this statement may fall through [-Wimplicit-fallthrough=] wqe->rqe.flags |= SIW_WQE_SOLICITED; ~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ drivers/infiniband/sw/siw/siw_qp_rx.c:1215:2: note: here case RDMAP_SEND: ^~~~ drivers/infiniband/sw/siw/siw_qp_tx.c: In function ‘siw_qp_sq_process’: drivers/infiniband/sw/siw/siw_qp_tx.c:1044:4: warning: this statement may fall through [-Wimplicit-fallthrough=] siw_wqe_put_mem(wqe, tx_type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/sw/siw/siw_qp_tx.c:1045:3: note: here case SIW_OP_INVAL_STAG: ^~~~ drivers/infiniband/sw/siw/siw_qp_tx.c:1128:4: warning: this statement may fall through [-Wimplicit-fallthrough=] siw_wqe_put_mem(wqe, tx_type); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/sw/siw/siw_qp_tx.c:1129:3: note: here case SIW_OP_INVAL_STAG: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-11rdma/siw: Remove set but not used variable 's'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/sw/siw/siw_cm.c: In function siw_cm_llp_state_change: drivers/infiniband/sw/siw/siw_cm.c:1278:17: warning: variable s set but not used [-Wunused-but-set-variable] Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-11rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPSGeert Uytterhoeven1-1/+2
If LIBCRC32C and DMA_VIRT_OPS are not enabled: drivers/infiniband/sw/siw/siw_main.o: In function `siw_newlink': siw_main.c:(.text+0x35c): undefined reference to `dma_virt_ops' drivers/infiniband/sw/siw/siw_qp_rx.o: In function `siw_csum_update': siw_qp_rx.c:(.text+0x16): undefined reference to `crc32c' Fix the first issue by adding a select of DMA_VIRT_OPS. Fix the second issue by replacing the unneeded dependency on CRYPTO_CRC32 by a dependency on LIBCRC32C. Reported-by: noreply@ellerman.id.au (first issue) Fixes: c0cf5bdde46c ("rdma/siw: addition to kernel build environment") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-11RDMA/siw: Add missing rtnl_lock around access to ifaJason Gunthorpe1-0/+2
ifa is protected by rcu or rtnl, add the missing locking. In this case we have to use rtnl since siw_listen_address() is sleeping. Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-10rdma/siw: Use proper enumerated type in map_cqe_statusNathan Chancellor1-1/+1
clang warns several times: drivers/infiniband/sw/siw/siw_cq.c:31:4: warning: implicit conversion from enumeration type 'enum siw_wc_status' to different enumeration type 'enum siw_opcode' [-Wenum-conversion] { SIW_WC_SUCCESS, IB_WC_SUCCESS }, ~ ^~~~~~~~~~~~~~ Fixes: b0fff7317bb4 ("rdma/siw: completion queue methods") Link: https://github.com/ClangBuiltLinux/linux/issues/596 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-10RDMA/siw: Remove unnecessary kthread create/destroy printoutsBernard Metzler2-7/+1
There is already a warning if we cannot start any thread, and stopping those threads is not worth spamming the console. This also corrects a warning from gcc: drivers/infiniband/sw/siw/siw_main.c: In function 'siw_create_tx_threads': drivers/infiniband/sw/siw/siw_main.c:91:11: warning: variable 'rv' set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-10IB/rdmavt: Fix variable shadowing issue in rvt_create_cqNathan Chancellor1-2/+0
clang warns: drivers/infiniband/sw/rdmavt/cq.c:260:7: warning: variable 'err' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (err) ^~~ drivers/infiniband/sw/rdmavt/cq.c:310:9: note: uninitialized use occurs here return err; ^~~ drivers/infiniband/sw/rdmavt/cq.c:260:3: note: remove the 'if' if its condition is always false if (err) ^~~~~~~~ drivers/infiniband/sw/rdmavt/cq.c:253:7: warning: variable 'err' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (!cq->ip) { ^~~~~~~ drivers/infiniband/sw/rdmavt/cq.c:310:9: note: uninitialized use occurs here return err; ^~~ drivers/infiniband/sw/rdmavt/cq.c:253:3: note: remove the 'if' if its condition is always false if (!cq->ip) { ^~~~~~~~~~~~~~ drivers/infiniband/sw/rdmavt/cq.c:211:9: note: initialize the variable 'err' to silence this warning int err; ^ = 0 2 warnings generated. The function scoped err variable is uninitialized when the flow jumps into the if statement. The if scoped err variable shadows the function scoped err variable, preventing the err assignments within the if statement to be reflected at the function level, which will cause uninitialized use when the goto statements are taken. Just remove the if scoped err declaration so that there is only one copy of the err variable for this function. Fixes: 239b0e52d8aa ("IB/hfi1: Move rvt_cq_wc struct into uapi directory") Link: https://github.com/ClangBuiltLinux/linux/issues/594 Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMMKonstantin Taranov2-1/+5
Calculate the correct byte_len on the receiving side when a work completion is generated with IB_WC_RECV_RDMA_WITH_IMM opcode. According to the IBA byte_len must indicate the number of written bytes, whereas it was always equal to zero for the IB_WC_RECV_RDMA_WITH_IMM opcode, even though data was transferred. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Konstantin Taranov <konstantin.taranov@inf.ethz.ch> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08RDMA/rvt: Do not use a kernel header in the ABIJason Gunthorpe1-5/+27
rvt was using ib_sge as part of it's ABI, which is not allowed. Introduce a new struct with the same layout and use it instead. Fixes: dabac6e460ce ("IB/hfi1: Move receive work queue struct into uapi directory") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-08RDMA/siw: Fix DEFINE_PER_CPU compilation when ARCH_NEEDS_WEAK_PER_CPUJason Gunthorpe2-9/+9
The initializer for the variable cannot be inside the macro (and zero initialization isn't needed anyhow). include/linux/percpu-defs.h:92:33: warning: '__pcpu_unique_use_cnt' initialized and declared 'extern' extern __PCPU_DUMMY_ATTRS char __pcpu_unique_##name; \ ^~~~~~~~~~~~~~ include/linux/percpu-defs.h:115:2: note: in expansion of macro 'DEFINE_PER_CPU_SECTION' DEFINE_PER_CPU_SECTION(type, name, "") ^~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/sw/siw/siw_main.c:129:8: note: in expansion of macro 'DEFINE_PER_CPU' static DEFINE_PER_CPU(atomic_t, use_cnt = ATOMIC_INIT(0)); ^~~~~~~~~~~~~~ Also the rules for PER_CPU require the variable names to be globally unique, so prefix them with siw_ Fixes: b9be6f18cf9e ("rdma/siw: transmit path") Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-07ibverbs/rxe: Remove variable self-initializationMaksym Planeta1-1/+1
In some cases (not in this particular one) variable self-initialization can lead to undefined behavior. In this case, it is just obscure code. Signed-off-by: Maksym Planeta <mplaneta@os.inf.tu-dresden.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02rdma/siw: addition to kernel build environmentBernard Metzler3-0/+29
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02rdma/siw: completion queue methodsBernard Metzler1-0/+101
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02rdma/siw: receive pathBernard Metzler1-0/+1456
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02rdma/siw: transmit pathBernard Metzler1-0/+1269
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02rdma/siw: queue pair methodsBernard Metzler1-0/+1322
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02rdma/siw: application buffer managementBernard Metzler2-0/+534
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02rdma/siw: application interfaceBernard Metzler2-0/+1851
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02rdma/siw: connection managementBernard Metzler2-0/+2205
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02rdma/siw: network and RDMA core interfaceBernard Metzler1-0/+687
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02rdma/siw: main include fileBernard Metzler1-0/+745
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02rdma/siw: iWarp wire packet formatBernard Metzler1-0/+380
Broken up commit to add the Soft iWarp RDMA driver. Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/rdmavt: Add trace for map_mr_sgMike Marciniszyn2-0/+37
Add trace to debug map_mr_sg handling. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/rdmavt: Enhance trace information for FRWR debugMike Marciniszyn2-4/+18
This patch enhances the MR trace information to enable more focused debug of MR issues. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{rdmavt, hfi1, qib}: Add helpers to hide SWQE WR detailsMichael J. Ruhl1-1/+1
Add some helper functions to hide struct rvt_swqe details. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{rdmavt, hfi1, qib}: Remove AH refcount for UD QPsMichael J. Ruhl2-8/+56
Historically rdmavt destroy_ah() has returned an -EBUSY when the AH has a non-zero reference count. IBTA 11.2.2 notes no such return value or error case: Output Modifiers: - Verb results: - Operation completed successfully. - Invalid HCA handle. - Invalid address handle. ULPs never test for this error and this will leak memory. The reference count exists to allow for driver independent progress mechanisms to process UD SWQEs in parallel with post sends. The SWQE will hold a reference count until the UD SWQE completes and then drops the reference. Fix by removing need to reference count the AH. Add a UD specific allocation to each SWQE entry to cache the necessary information for independent progress. Copy the information during the post send processing. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/rdmavt: Set QP allowed opcodes after QP allocationMichael J. Ruhl1-23/+12
Currently QP allowed_ops is set after the QP is completely initialized. This curtails the use of this optimization for any initialization before allowed_ops is set. Fix by adding a helper to determine the correct allowed_ops and moving the setting of the allowed_ops to just after QP allocation. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{hfi1, qib, rdmavt}: Put qp in error state when cq is fullKamenee Arumugam3-5/+22
When a completion queue is full, the associated queue pairs are not put into the error state. According to the IBTA specification, this is a violation. Quote from IBTA spec: C9-218: A Requester Class F error occurs when the CQ is inaccessible or full and an attempt is made to complete a WQE. The Affected QP shall be moved to the error state and affiliated asynchronous errors generated as described in 11.6.3.1 Affiliated Asynchronous Events on page 678. The current WQE and any subsequent WQEs are left in an unknown state. C11-37: The CI shall generate a CQ Error when a CQ overrun is detected. This condition will result in an Affiliated Asynchronous Error for any associated Work Queues when they attempt to use that CQ. Completions can no longer be added to the CQ. It is not guaranteed that completions present in the CQ at the time the error occurred can be retrieved. Possible causes include a CQ overrun or a CQ protection error. Put the qp in error state when cq is full. Implement a state called full to continue to put other associated QPs in error state. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/rdmavt: Fracture single lock used for posting and processing RWQEsKamenee Arumugam3-60/+90
Usage of single lock prevents fetching posted and processing receive work queue entries from progressing simultaneously and impacts overall performance. Fracture the single lock used for posting and processing Receive Work Queue Entries (RWQEs) to allow the circular buffer to be filled and emptied at the same time. Two new spinlocks - one for the producers and one for the consumers used for posting and processing RWQEs simultaneously and the two indices are define on two different cache lines. The threshold count is used to avoid reading other index in different cache line every time. Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/hfi1: Move receive work queue struct into uapi directoryKamenee Arumugam4-71/+152
The rvt_rwqe and rvt_rwq struct elements are shared between rdmavt and the providers but are not in uapi directory. As per the comment in https://marc.info/?l=linux-rdma&m=152296522708522&w=2, The hfi1 driver and the rdma core driver are not using shared structures in the uapi directory. Move rvt_rwqe and rvt_rwq struct into rvt-abi.h header in uapi directory. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/hfi1: Move rvt_cq_wc struct into uapi directoryKamenee Arumugam1-69/+123
The rvt_cq_wc struct elements are shared between rdmavt and the providers but not in uapi directory. As per the comment in https://marc.info/?l=linux-rdma&m=152296522708522&w=2 The hfi1 driver and the rdma core driver are not using shared structures in the uapi directory. In that case, move rvt_cq_wc struct into the rvt-abi.h header file and create a rvt_k_cq_w for the kernel completion queue. Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-20IB/{rdmavt, qib, hfi1}: Convert to new completion APIMike Marciniszyn1-22/+9
Convert all completions to use the new completion routine that fixes a race between post send and completion where fields from a SWQE can be read after SWQE has been freed. This patch also addresses issues reported in https://marc.info/?l=linux-kernel&m=155656897409107&w=2. The reserved operation path has no need for any barrier. The barrier for the other path is addressed by the smp_load_acquire() barrier. Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-20RDMA: Check umem pointer validity prior to releaseLeon Romanovsky2-4/+2
Update ib_umem_release() to behave similarly to kfree() and allow submitting NULL pointer as safe input to this function. Fixes: a52c8e2469c3 ("RDMA: Clean destroy CQ in drivers do not return errors") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Convert CQ allocations to be under core responsibilityLeon Romanovsky6-59/+31
Ensure that CQ is allocated and freed by IB/core and not by drivers. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Clean destroy CQ in drivers do not return errorsLeon Romanovsky3-8/+3
Like all other destroy commands, .destroy_cq() call is not supposed to fail. In all flows, the attempt to return earlier caused to memory leaks. This patch converts .destroy_cq() to do not return any errors. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-10RDMA: Move owner into struct ib_device_opsJason Gunthorpe1-1/+1
This more closely follows how other subsytems work, with owner being a member of the structure containing the function pointers. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move uverbs_abi_ver into struct ib_device_opsJason Gunthorpe2-2/+3
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move driver_id into struct ib_device_opsJason Gunthorpe2-3/+3
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-30IB/rdmavt: Use struct_size() helperGustavo A. R. Silva1-3/+1
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, replace the following form: sizeof(struct rvt_sge) * init_attr->cap.max_send_sge + sizeof(struct rvt_swqe) with: struct_size(swq, sg_list, init_attr->cap.max_send_sge) and so on... Also, notice that variable size is unnecessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-29IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr valueMike Marciniszyn1-0/+2
The command 'ibv_devinfo -v' reports 0 for max_mr. Fix by assigning the query values after the mr lkey_table has been built rather than early on in the driver. Fixes: 7b1e2099adc8 ("IB/rdmavt: Move memory registration into rdmavt") Reviewed-by: Josh Collier <josh.d.collier@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-29IB/rdmavt: Fix alloc_qpn() WARN_ON()Mike Marciniszyn1-1/+2
The qpn allocation logic has a WARN_ON() that intends to detect the use of an index that will introduce bits in the lower order bits of the QOS bits in the QPN. Unfortunately, it has the following bugs: - it misfires when wrapping QPN allocation for non-QOS - it doesn't correctly detect low order QOS bits (despite the comment) The WARN_ON() should not be applied to non-QOS (qos_shift == 1). Additionally, it SHOULD test the qpn bits per the table below: 2 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^ [ 0, 0, 0, 0, 0, 0, sc0], qp bit 1 always 0* 3-4 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^ [ 0, 0, 0, 0, 0, sc1, sc0], qp bits [21] always 0 5-8 data VLs: [qp7, qp6, qp5, qp4, qp3, qp2, qp1] ^ [ 0, 0, 0, 0, sc2, sc1, sc0] qp bits [321] always 0 Fix by qualifying the warning for qos_shift > 1 and producing the correct mask to insure the above bits are zero without generating a superfluous warning. Fixes: 501edc42446e ("IB/rdmavt: Correct warning during QPN allocation") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner4-0/+4
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-06RDMA/rdmavt: Catch use-after-free access of AH structuresLeon Romanovsky1-2/+1
Prior to commit d345691471b4 ("RDMA: Handle AH allocations by IB/core"), AH destroy path is rdmavt returned -EBUSY warning to application and caused to potential leakage of kernel memory of AH structure. After that commit, the AH structure is always freed but such early return in driver code can potentially cause to use-after-free error. Add warning to catch such situation to help driver developers to fix AH release path. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03RDMA/rxe: Use rdma_read_gid_attr_ndev_rcu to access netdevParav Pandit1-3/+12
Use rdma_read_gid_attr_ndev_rcu() to access netdevice attached to GID entry under rcu lock. This ensures that while working on the netdevice of the GID, it doesn't get freed. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03RDMA/rxe: Consider skb reserve space based on netdev of GIDParav Pandit1-1/+2
Always consider the skb reserve space based on netdevice of the GID attribute, regardless of vlan or non vlan netdevice. Fixes: 43c9fc509fa5 ("rdma_rxe: make rxe work over 802.1q VLAN devices") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-25crypto: shash - remove shash_desc::flagsEric Biggers1-1/+0
The flags field in 'struct shash_desc' never actually does anything. The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP. However, no shash algorithm ever sleeps, making this flag a no-op. With this being the case, inevitably some users who can't sleep wrongly pass MAY_SLEEP. These would all need to be fixed if any shash algorithm actually started sleeping. For example, the shash_ahash_*() functions, which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP from the ahash API to the shash API. However, the shash functions are called under kmap_atomic(), so actually they're assumed to never sleep. Even if it turns out that some users do need preemption points while hashing large buffers, we could easily provide a helper function crypto_shash_update_large() which divides the data into smaller chunks and calls crypto_shash_update() and cond_resched() for each chunk. It's not necessary to have a flag in 'struct shash_desc', nor is it necessary to make individual shash algorithms aware of this at all. Therefore, remove shash_desc::flags, and document that the crypto_shash_*() functions can be called from any context. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-24IB/{rdmavt, qib, hfi1}: Use new routine to release reference countsMike Marciniszyn1-7/+2
The reference count adjustments on reference count completion are open coded throughout. Add a routine to do all reference count adjustments and use. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24IB/rdmavt: Use more efficient allowed_opsMike Marciniszyn1-11/+4
QP creation already records the allowed_ops. Take advantage of that single field to replace multiple qp_type specific tests. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>