aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/ulp/isert (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-06-28Merge tag 'v5.2-rc6' into rdma.git for-nextJason Gunthorpe3-9/+3
For dependencies in next patches. Resolve conflicts: - Use uverbs_get_cleared_udata() with new cq allocation flow - Continue to delete nes despite SPDX conflict - Resolve list appends in mlx5_command_str() - Use u16 for vport_rule stuff - Resolve list appends in struct ib_client Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/rw: Use IB_WR_REG_MR_INTEGRITY for PI handoverIsrael Rukshin1-2/+2
Replace the old signature handover API with the new one. The new API simplifes PI handover code complexity for ULPs and improve performance. For RW API it will reduce the maximum number of work requests per task and the need of dealing with multiple MRs (and their registrations and invalidations) per task. All the mappings and registration of the data and the protection buffers is done by the LLD using a single WR and a special MR type (IB_MR_TYPE_INTEGRITY) for the PI handover operation. The setup of the tested benchmark (using iSER ULP): - 2 servers with 24 cores (1 initiator and 1 target) - ConnectX-4/ConnectX-5 adapters - 24 target sessions with 1 LUN each - ramdisk backstore - PI active Performance results running fio (24 jobs, 128 iodepth) using write_generate=1 and read_verify=1 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1243.3K/1182.3K 1725.1K/1680.2K 4k 571233/528835 743293/748259 32k 72388/71086 71789/93573 Using write_generate=0 and read_verify=0 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1572.1K/1427.2K 1823.5K/1724.3K 4k 921992/916194 753772/768267 32k 75052/73960 73180/95484 There is a performance degradation when writing big block sizes. Degradation is caused by the complexity of combining multiple indirections and perform RDMA READ operation from it. This will be fixed in the following patches by reducing the indirections if possible. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Rename signature qp create flag and signature device capabilityIsrael Rukshin1-2/+2
Rename IB_QP_CREATE_SIGNATURE_EN to IB_QP_CREATE_INTEGRITY_EN and IB_DEVICE_SIGNATURE_HANDOVER to IB_DEVICE_INTEGRITY_HANDOVER. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-9/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21IB/isert: Remove unused sig_attrs argumentIsrael Rukshin1-6/+5
Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-1/+1
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
2019-02-04scsi: target/iscsi: Fix spelling of "unsolicited"Bart Van Assche1-1/+1
Change "unsoliticed" into "unsolicited". Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-25infiniband: remove unneeded header search pathsMasahiro Yamada1-1/+0
The included headers are located in include/target/. I was able to build these drivers without the extra header search paths. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-26RDMA/ulp: Use dev_name instead of ibdev->nameJason Gunthorpe1-1/+1
These return the same thing but dev_name is a more conventional use of the kernel API. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
2018-07-24IB/isert: Simplify ib_post_(send|recv|srq_recv)() callsBart Van Assche1-12/+9
Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL as third argument to ib_post_(send|recv|srq_recv)(). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/core: add max_send_sge and max_recv_sge attributesSteve Wise1-2/+3
This patch replaces the ib_device_attr.max_sge with max_send_sge and max_recv_sge. It allows ulps to take advantage of devices that have very different send and recv sge depths. For example cxgb4 has a max_recv_sge of 4, yet a max_send_sge of 16. Splitting out these attributes allows much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW API. Consider a large RDMA WRITE that has 16 scattergather entries. With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of 16, it can be done with 1 WRITE WR. Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-2/+3
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04IB/isert: use T10-PI check mask definitions from core layerMax Gurtovoy1-4/+7
No reason to use hard-coded protection information checks in ib_isert driver. Use check masks from RDMA core driver. Also, while we here, reduce the number of instructions made for setting the check mask (no need to do bitwise or with 0 since we zero the mask in the beginning of the function). Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-04IB/isert: fix T10-pi check mask settingMax Gurtovoy1-1/+1
A copy/paste bug (probably) caused setting of an app_tag check mask in case where a ref_tag check was needed. Fixes: 38a2d0d429f1 ("IB/isert: convert to the generic RDMA READ/WRITE API") Fixes: 9e961ae73c2c ("IB/isert: Support T10-PI protected transactions") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24IB/isert: Fix for lib/dma_debug check_sync warningAlex Estrin1-9/+17
The following error message occurs on a target host in a debug build during session login: [ 3524.411874] WARNING: CPU: 5 PID: 12063 at lib/dma-debug.c:1207 check_sync+0x4ec/0x5b0 [ 3524.421057] infiniband hfi1_0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000000000000] [size=76 bytes] ......snip ..... [ 3524.535846] CPU: 5 PID: 12063 Comm: iscsi_np Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1 [ 3524.546764] Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.2.6 06/08/2015 [ 3524.555740] Call Trace: [ 3524.559102] [<ffffffffa5fe915b>] dump_stack+0x19/0x1b [ 3524.565477] [<ffffffffa58a2f58>] __warn+0xd8/0x100 [ 3524.571557] [<ffffffffa58a2fdf>] warn_slowpath_fmt+0x5f/0x80 [ 3524.578610] [<ffffffffa5bf5b8c>] check_sync+0x4ec/0x5b0 [ 3524.585177] [<ffffffffa58efc3f>] ? set_cpus_allowed_ptr+0x5f/0x1c0 [ 3524.592812] [<ffffffffa5bf5cd0>] debug_dma_sync_single_for_cpu+0x80/0x90 [ 3524.601029] [<ffffffffa586add3>] ? x2apic_send_IPI_mask+0x13/0x20 [ 3524.608574] [<ffffffffa585ee1b>] ? native_smp_send_reschedule+0x5b/0x80 [ 3524.616699] [<ffffffffa58e9b76>] ? resched_curr+0xf6/0x140 [ 3524.623567] [<ffffffffc0879af0>] isert_create_send_desc.isra.26+0xe0/0x110 [ib_isert] [ 3524.633060] [<ffffffffc087af95>] isert_put_login_tx+0x55/0x8b0 [ib_isert] [ 3524.641383] [<ffffffffa58ef114>] ? try_to_wake_up+0x1a4/0x430 [ 3524.648561] [<ffffffffc098cfed>] iscsi_target_do_tx_login_io+0xdd/0x230 [iscsi_target_mod] [ 3524.658557] [<ffffffffc098d827>] iscsi_target_do_login+0x1a7/0x600 [iscsi_target_mod] [ 3524.668084] [<ffffffffa59f9bc9>] ? kstrdup+0x49/0x60 [ 3524.674420] [<ffffffffc098e976>] iscsi_target_start_negotiation+0x56/0xc0 [iscsi_target_mod] [ 3524.684656] [<ffffffffc098c2ee>] __iscsi_target_login_thread+0x90e/0x1070 [iscsi_target_mod] [ 3524.694901] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.705446] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.715976] [<ffffffffc098ca78>] iscsi_target_login_thread+0x28/0x60 [iscsi_target_mod] [ 3524.725739] [<ffffffffa58d60ff>] kthread+0xef/0x100 [ 3524.732007] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.739540] [<ffffffffa5fff1b7>] ret_from_fork_nospec_begin+0x21/0x21 [ 3524.747558] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.755088] ---[ end trace 23f8bf9238bd1ed8 ]--- [ 3595.510822] iSCSI/iqn.1994-05.com.redhat:537fa56299: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION. The code calls dma_sync on login_tx_desc->dma_addr prior to initializing it with dma-mapped address. login_tx_desc is a part of iser_conn structure and is used only once during login negotiation, so the issue is fixed by eliminating dma_sync call for this buffer using a special case routine. Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-30Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitJason Gunthorpe1-0/+1
To resolve conflicts in: drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/mlx5/qp.c From patches merged into the -rc cycle. The conflict resolution matches what linux-next has been carrying. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-10iser-target: Fix possible use-after-free in connection establishment errorSagi Grimberg1-0/+1
In case we fail to establish the connection we must drain our pre-posted login recieve work request before continuing safely with connection teardown. Fixes: a060b5629ab0 ("IB/core: generic RDMA READ/WRITE API") Cc: <stable@vger.kernel.org> # 4.7+ Reported-by: Amrani, Ram <Ram.Amrani@cavium.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-12-18iser-target: avoid reinitializing rdma contexts for isert commandsBharat Potnuri2-0/+8
isert commands that failed during isert_rdma_rw_ctx_post() are queued to Queue-Full(QF) queue and are scheduled to be reposted during queue-full queue processing. During this reposting, the rdma contexts are initialised again in isert_rdma_rw_ctx_post(), which is leaking significant memory. unreferenced object 0xffff8830201d9640 (size 64): comm "kworker/0:2", pid 195, jiffies 4295374851 (age 4528.436s) hex dump (first 32 bytes): 00 60 8b cb 2e 00 00 00 00 10 00 00 00 00 00 00 .`.............. 00 90 e3 cb 2e 00 00 00 00 10 00 00 00 00 00 00 ................ backtrace: [<ffffffff8170711e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811f8ba5>] __kmalloc+0x125/0x2b0 [<ffffffffa046b24f>] rdma_rw_ctx_init+0x15f/0x6f0 [ib_core] [<ffffffffa07ab644>] isert_rdma_rw_ctx_post+0xc4/0x3c0 [ib_isert] [<ffffffffa07ad972>] isert_put_datain+0x112/0x1c0 [ib_isert] [<ffffffffa07dddce>] lio_queue_data_in+0x2e/0x30 [iscsi_target_mod] [<ffffffffa076c322>] target_qf_do_work+0x2b2/0x4b0 [target_core_mod] [<ffffffff81080c3b>] process_one_work+0x1db/0x5d0 [<ffffffff8108107d>] worker_thread+0x4d/0x3e0 [<ffffffff81088667>] kthread+0x117/0x150 [<ffffffff81713fa7>] ret_from_fork+0x27/0x40 [<ffffffffffffffff>] 0xffffffffffffffff Here is patch to use the older rdma contexts while reposting the isert commands intead of reinitialising them. Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-11-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds1-7/+7
Pull rdma updates from Doug Ledford: "This is a fairly plain pull request. Lots of driver updates across the stack, a huge number of static analysis cleanups including a close to 50 patch series from Bart Van Assche, and a number of new features inside the stack such as general CQ moderation support. Nothing really stands out, but there might be a few conflicts as you take things in. In particular, the cleanups touched some of the same lines as the new timer_setup changes. Everything in this pull request has been through 0day and at least two days of linux-next (since Stephen doesn't necessarily flag new errors/warnings until day2). A few more items (about 30 patches) from Intel and Mellanox showed up on the list on Tuesday. I've excluded those from this pull request, and I'm sure some of them qualify as fixes suitable to send any time, but I still have to review them fully. If they contain mostly fixes and little or no new development, then I will probably send them through by the end of the week just to get them out of the way. There was a break in my acceptance of patches which coincides with the computer problems I had, and then when I got things mostly back under control I had a backlog of patches to process, which I did mostly last Friday and Monday. So there is a larger number of patches processed in that timeframe than I was striving for. Summary: - Add iWARP support to qedr driver - Lots of misc fixes across subsystem - Multiple update series to hns roce driver - Multiple update series to hfi1 driver - Updates to vnic driver - Add kref to wait struct in cxgb4 driver - Updates to i40iw driver - Mellanox shared pull request - timer_setup changes - massive cleanup series from Bart Van Assche - Two series of SRP/SRPT changes from Bart Van Assche - Core updates from Mellanox - i40iw updates - IPoIB updates - mlx5 updates - mlx4 updates - hns updates - bnxt_re fixes - PCI write padding support - Sparse/Smatch/warning cleanups/fixes - CQ moderation support - SRQ support in vmw_pvrdma" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (296 commits) RDMA/core: Rename kernel modify_cq to better describe its usage IB/mlx5: Add CQ moderation capability to query_device IB/mlx4: Add CQ moderation capability to query_device IB/uverbs: Add CQ moderation capability to query_device IB/mlx5: Exposing modify CQ callback to uverbs layer IB/mlx4: Exposing modify CQ callback to uverbs layer IB/uverbs: Allow CQ moderation with modify CQ iw_cxgb4: atomically flush the qp iw_cxgb4: only call the cq comp_handler when the cq is armed iw_cxgb4: Fix possible circular dependency locking warning RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion IB/core: Only maintain real QPs in the security lists IB/ocrdma_hw: remove unnecessary code in ocrdma_mbx_dealloc_lkey RDMA/core: Make function rdma_copy_addr return void RDMA/vmw_pvrdma: Add shared receive queue support RDMA/core: avoid uninitialized variable warning in create_udata RDMA/bnxt_re: synchronize poll_cq and req_notify_cq verbs RDMA/bnxt_re: Flush CQ notification Work Queue before destroying QP RDMA/bnxt_re: Set QP state in case of response completion errors RDMA/bnxt_re: Add memory barriers when processing CQ/EQ entries ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-14RDMA/isert: Suppress gcc 7 fall-through complaintsBart Van Assche1-7/+7
Avoid that gcc 7 reports the following warning when building with W=1: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-24RDMA: Remove useless MODULE_VERSIONLeon Romanovsky1-1/+0
All modules in drivers/infiniband defined and used MODULE_VERSION, which was pointless because the kernel version describes their state more accurate then those arbitrary numbers. Signed-off-by: Leon Romanovsky <leon@kernel.org> Acked-by: Sagi Grimbrg <sagi@grimberg.me> Reviewed-by: Sagi Grimberg <sagi@grimbeg.me> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Ram Amrani <Ram.Amrani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-06iser-target: Avoid isert_conn->cm_id dereference in isert_login_recv_doneNicholas Bellinger1-1/+1
This patch fixes a NULL pointer dereference in isert_login_recv_done() of isert_conn->cm_id due to isert_cma_handler() -> isert_connect_error() resetting isert_conn->cm_id = NULL during a failed login attempt. As per Sagi, we will always see the completion of all recv wrs posted on the qp (given that we assigned a ->done handler), this is a FLUSH error completion, we just don't get to verify that because we deref NULL before. The issue here, was the assumption that dereferencing the connection cm_id is always safe, which is not true since: commit 4a579da2586bd3b79b025947ea24ede2bbfede62 Author: Sagi Grimberg <sagig@mellanox.com> Date: Sun Mar 29 15:52:04 2015 +0300 iser-target: Fix possible deadlock in RDMA_CM connection error As I see it, we have a direct reference to the isert_device from isert_conn which is the one-liner fix that we actually need like we do in isert_rdma_read_done() and isert_rdma_write_done(). Reported-by: Andrea Righi <righi.andrea@gmail.com> Tested-by: Andrea Righi <righi.andrea@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-30iser-target: avoid posting a recv buffer twiceSagi Grimberg2-1/+14
We pre-allocate our send-queues and might overflow them in case we have multi work-request operations which tend to occur for large RDMA transfers over devices with limited allowed sg elements. When we get to a queue-full condition we might retry again later, so track our receive buffers so we don't repost them for a retry case. Reported-by: Potnuri Bharat Teja <bharat@chelsio.com> Tested-by: Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-30iser-target: Fix queue-full response handlingNicholas Bellinger1-18/+35
This patch addresses two queue-full handling bugs in iser-target. The first is propagating isert_rdma_rw_ctx_post() return back to target-core via isert_put_datain() + isert_get_dataout() callbacks, in order to trigger queue-full logic in target-core. Note target-core expects -EAGAIN or -ENOMEM error to signal RDMA WRITE/READ data-transfer callbacks should be retried, after queue-full logic been invoked. Other types of errors propagated up from RDMA RW API will result in target-core generating internal CHECK_CONDITION status, avoiding subsequent isert_put_datain() and isert_get_dataout() iscsit_transport callback retry attempts. The second is to use transport_generic_request_failure() during T10-PI hw-offload errors in isert_rdma_write_done() and isert_rdma_read_done(), so CHECK_CONDITION queue-full is handled internally by target-core. Also add isert_put_response() T10-PI failure case fixme in isert_rdma_write_done(), which is currently not internally retried or released until session reinstatement. Reported-by: Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com> Tested-by: Potnuri Bharat Teja <bharat@chelsio.com> Cc: Potnuri Bharat Teja <bharat@chelsio.com> Reported-by: Steve Wise <swise@opengridcomputing.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-01-24IB/isert: fix spelling mistake: "teminating" -> "terminating"Colin Ian King1-1/+1
Trivial fix to spelling mistake in isert_warn message Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14Merge branches 'misc', 'qedr', 'reject-helpers', 'rxe' and 'srp' into merge-testDoug Ledford1-0/+8
2016-12-14IB/isert: do not ignore errors in dma_map_single()Alexey Khoroshilov1-0/+6
There are several places, where errors in dma_map_single() are ignored. The patch fixes them. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-14ib_isert: log the connection reject messageSteve Wise1-0/+2
Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-12-03IB/isert: Remove and fix debug prints after allocation failureLeon Romanovsky1-17/+6
The prints after [k|v][m|z|c]alloc() functions are not needed, because in case of failure, allocator will print their internal error prints anyway. Signed-off-by: Leon Romanovsky <leon@kernel.org> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds1-1/+1
Pull main rdma updates from Doug Ledford: "This is the main pull request for the rdma stack this release. The code has been through 0day and I had it tagged for linux-next testing for a couple days. Summary: - updates to mlx5 - updates to mlx4 (two conflicts, both minor and easily resolved) - updates to iw_cxgb4 (one conflict, not so obvious to resolve, proper resolution is to keep the code in cxgb4_main.c as it is in Linus' tree as attach_uld was refactored and moved into cxgb4_uld.c) - improvements to uAPI (moved vendor specific API elements to uAPI area) - add hns-roce driver and hns and hns-roce ACPI reset support - conversion of all rdma code away from deprecated create_singlethread_workqueue - security improvement: remove unsafe ib_get_dma_mr (breaks lustre in staging)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (75 commits) staging/lustre: Disable InfiniBand support iw_cxgb4: add fast-path for small REG_MR operations cxgb4: advertise support for FR_NSMR_TPTE_WR IB/core: correctly handle rdma_rw_init_mrs() failure IB/srp: Fix infinite loop when FMR sg[0].offset != 0 IB/srp: Remove an unused argument IB/core: Improve ib_map_mr_sg() documentation IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets IB/mthca: Move user vendor structures IB/nes: Move user vendor structures IB/ocrdma: Move user vendor structures IB/mlx4: Move user vendor structures IB/cxgb4: Move user vendor structures IB/cxgb3: Move user vendor structures IB/mlx5: Move and decouple user vendor structures IB/{core,hw}: Add constant for node_desc ipoib: Make ipoib_warn ratelimited IB/mlx4/alias_GUID: Remove deprecated create_singlethread_workqueue IB/ipoib_verbs: Remove deprecated create_singlethread_workqueue IB/ipoib: Remove deprecated create_singlethread_workqueue ...
2016-09-23IB/core: add support to create a unsafe global rkey to ib_create_pdChristoph Hellwig1-1/+1
Instead of exposing ib_get_dma_mr to ULPs and letting them use it more or less unchecked, this moves the capability of creating a global rkey into the RDMA core, where it can be easily audited. It also prints a warning everytime this feature is used as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/isert: Properly release resources on DEVICE_REMOVALRaju Rangoju2-3/+22
When the low level driver exercises the hot unplug they would call rdma_cm cma_remove_one which would fire DEVICE_REMOVAL event to all cma consumers. Now, if consumer doesn't make sure they destroy all IB objects created on that IB device instance prior to finalizing all processing of DEVICE_REMOVAL callback, rdma_cm will let the lld to de-register with IB core and destroy the IB device instance. And if the consumer calls (say) ib_dereg_mr(), it will crash since that dev object is NULL. In the current implementation, iser-target just initiates the cleanup and returns from DEVICE_REMOVAL callback. This deferred work creates a race between iser-target cleaning IB objects(say MR) and lld destroying IB device instance. This patch includes the following fixes -> make sure that consumer frees all IB objects associated with device instance -> return non-zero from the callback to destroy the rdma_cm id Signed-off-by: Raju Rangoju <rajur@chelsio.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-22IB/isert: fix error return code in isert_alloc_login_buf()Wei Yongjun1-1/+1
Fix to return error code -ENOMEM from the alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/isert: Remove an unused member variableBart Van Assche2-3/+0
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Steve Wise <swise@opengridcomputing.com> Tested-by: Laurence Oberman <loberman@redhat.com> Cc: Parav Pandit <pandit.parav@gmail.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-28Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds1-0/+11
Pull SCSI target updates from Nicholas Bellinger: "Here are the outstanding target pending updates for v4.7-rc1. The highlights this round include: - Allow external PR/ALUA metadata path be defined at runtime via top level configfs attribute (Lee) - Fix target session shutdown bug for ib_srpt multi-channel (hch) - Make TFO close_session() and shutdown_session() optional (hch) - Drop se_sess->sess_kref + convert tcm_qla2xxx to internal kref (hch) - Add tcm_qla2xxx endpoint attribute for basic FC jammer (Laurence) - Refactor iscsi-target RX/TX PDU encode/decode into common code (Varun) - Extend iscsit_transport with xmit_pdu, release_cmd, get_rx_pdu, validate_parameters, and get_r2t_ttt for generic ISO offload (Varun) - Initial merge of cxgb iscsi-segment offload target driver (Varun) The bulk of the changes are Chelsio's new driver, along with a number of iscsi-target common code improvements made by Varun + Co along the way" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (29 commits) iscsi-target: Fix early sk_data_ready LOGIN_FLAGS_READY race cxgbit: Use type ISCSI_CXGBIT + cxgbit tpg_np attribute iscsi-target: Convert transport drivers to signal rdma_shutdown iscsi-target: Make iscsi_tpg_np driver show/store use generic code tcm_qla2xxx Add SCSI command jammer/discard capability iscsi-target: graceful disconnect on invalid mapping to iovec target: need_to_release is always false, remove redundant check and kfree target: remove sess_kref and ->shutdown_session iscsi-target: remove usage of ->shutdown_session tcm_qla2xxx: introduce a private sess_kref target: make close_session optional target: make ->shutdown_session optional target: remove acl_stop target: consolidate and fix session shutdown cxgbit: add files for cxgbit.ko iscsi-target: export symbols iscsi-target: call complete on conn_logout_comp iscsi-target: clear tx_thread_active iscsi-target: add new offload transport type iscsi-target: use conn_transport->transport_type in text rsp ...
2016-05-16iscsi-target: Convert transport drivers to signal rdma_shutdownNicholas Bellinger1-0/+1
Instead of special casing the handful of callers that check for iser-target rdma verbs specific shutdown, use a simple flag at iscsit_transport->rdma_shutdown so each driver can signal this. Also, update iscsi-target/tcp + cxgbit to rdma_shutdown = false. Cc: Varun Prakash <varun@chelsio.com> Cc: Hariprasad Shenai <hariprasad@chelsio.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-05-13IB/isert: convert to the generic RDMA READ/WRITE APIChristoph Hellwig2-825/+85
Replace the homegrown RDMA READ/WRITE code in isert with the generic API, which also adds iWarp support to the I/O path as a side effect. Note that full iWarp operation will need a few additional patches from Steve. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-13IB/core: Add passing an offset into the SG to ib_map_mr_sgChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-09iscsi-target: add void (*iscsit_get_rx_pdu)()Varun Prakash1-0/+10
Add void (*iscsit_get_rx_pdu)() to struct iscsit_transport, iscsi-target uses this callback to receive and process Rx iSCSI PDUs. cxgbit.ko needs this callback to reuse iscsi-target Rx thread. Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-30iser-target: Use ib_drain_qpSagi Grimberg2-37/+4
Now the rdma core offers a QP draining service in v4.6-rc1, use it instead of our own. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-10iser-target: Kill the ->isert_cmd back pointer in struct iser_tx_descChristoph Hellwig2-9/+8
We only use the pointer when processing regular iSER commands, and it then always points to the struct iser_cmd that contains the TX descriptor. Remove it and rely on container_of to save a little space and avoid a pointer that is updated multiple times per processed command. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-10iser-target: Kill struct isert_rdma_wrChristoph Hellwig2-130/+119
There is exactly one instance per struct isert_cmd, so merge the two to simplify everyones life. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-10iser-target: Convert to new CQ APIChristoph Hellwig2-243/+184
Use the workqueue based CQ type similar to what isert was using previously, and properly split up the completion handlers. Note that this also takes special care to handle the magic login WRs separately, and also renames the submission functions so that it's clear that they are only to be used for the login buffers. (Fix up isert_print_wc usage in isert_beacon_done - nab) Signed-off-by: Christoph Hellwig <hch@lst.de> [sagig: added iscsi conn reinstatement in non-flush error completions and added error completion type print] Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-10iser-target: Split and properly type the login bufferChristoph Hellwig2-30/+29
The login receive buffer is used as a iser_rx_desc, so type it as such in struct isert_conn and allocate the exactly right space for it. The TX buffer is moved to a separate variable and properly sized as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-10iser-target: Remove ISER_RECV_DATA_SEG_LENChristoph Hellwig2-10/+8
This is the same as ISCSI_DEF_MAX_RECV_SEG_LEN (and must be the same given the structure layouts), so just use that constant instead. This also allows removing ISER_RX_LOGIN_SIZE in favor of ISER_RX_PAYLOAD_SIZE. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-10iser-target: Remove impossible condition from isert_wait_connJenny Derzhavetz1-8/+0
We can never get to isert_wait_conn in INIT state anymore, so get rid of this condition. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-10iser-target: Remove redundant wait in release_connJenny Derzhavetz2-8/+0
With current termination flow we call release_conn after completion. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-10iser-target: Rework connection terminationJenny Derzhavetz2-56/+52
When we receive an event that triggers connection termination, we have a a couple of things we may want to do: 1. In case we are already terminating, bailout early 2. In case we are connected but not bound, disconnect and schedule a connection cleanup silently (don't reinstate) 3. In case we are connected and bound, disconnect and reinstate the connection This rework fixes a bug that was detected against a mis-behaved initiator which rejected our rdma_cm accept, in this stage the isert_conn is no bound and reinstate caused a bogus dereference. What's great about this is that we don't need the post_recv_buf_count anymore, so get rid of it. Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.