aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/ulp (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-25IB/opa_vnic: Spelling correction of 'erorr' to 'error'Dillon Brock1-1/+1
Correcting a minor spelling mistake in the comments. Link: https://lore.kernel.org/r/20200118162542.15188-1-dab9861@gmail.com Signed-off-by: Dillon Brock <dab9861@gmail.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-15IB/srp: Never use immediate data if it is disabled by a userSergey Gorenko1-1/+2
Some SRP targets that do not support specification SRP-2, put the garbage to the reserved bits of the SRP login response. The problem was not detected for a long time because the SRP initiator ignored those bits. But now one of them is used as SRP_LOGIN_RSP_IMMED_SUPP. And it causes a critical error on the target when the initiator sends immediate data. The ib_srp module has a use_imm_date parameter to enable or disable immediate data manually. But it does not help in the above case, because use_imm_date is ignored at handling the SRP login response. The problem is definitely caused by a bug on the target side, but the initiator's behavior also does not look correct. The initiator should not use immediate data if use_imm_date is disabled by a user. This commit adds an additional checking of use_imm_date at the handling of SRP login response to avoid unexpected use of immediate data. Fixes: 882981f4a411 ("RDMA/srp: Add support for immediate data") Link: https://lore.kernel.org/r/20200115133055.30232-1-sergeygo@mellanox.com Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-03IB/iser: use true,false for bool variablezhengbin2-2/+2
Fixes coccicheck warning: drivers/infiniband/ulp/iser/iser_memory.c:530:2-21: WARNING: Assignment of 0/1 to bool variable drivers/infiniband/ulp/iser/iser_verbs.c:1096:2-21: WARNING: Assignment of 0/1 to bool variable Link: https://lore.kernel.org/r/1577176812-2238-4-git-send-email-zhengbin13@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-03RDMA/srpt: Remove unnecessary assertion in srpt_queue_responseAditya Pakki1-2/+0
Since ch has already been de-referenced by the time we get to the BUG_ON, it is useless. The back trace alone is enough to tell what is going on, delete the redundant BUG_ON. Link: https://lore.kernel.org/r/20191217194437.25568-1-pakki001@umn.edu Signed-off-by: Aditya Pakki <pakki001@umn.edu> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya1-1/+1
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-11-25Merge branch 'ib-guids' into rdma.git for-nextJason Gunthorpe1-0/+10
Danit Goldberg says: ==================== This series extends RTNETLINK to provide IB port and node GUIDs, which were configured for Infiniband VFs. The functionality to set VF GUIDs already existed for a long time, and here we are adding the missing "get" so that netlink will be symmetric and various cloud orchestration tools will be able to manage such VFs more naturally. The iproute2 was extended too to present those GUIDs. - ip link show <device> For example: - ip link set ib4 vf 0 node_guid 22:44:33:00:33:11:00:33 - ip link set ib4 vf 0 port_guid 10:21:33:12:00:11:22:10 - ip link show ib4 ib4: <BROADCAST,MULTICAST> mtu 4092 qdisc noop state DOWN mode DEFAULT group default qlen 256 link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, NODE_GUID 22:44:33:00:33:11:00:33, PORT_GUID 10:21:33:12:00:11:22:10, link-state disable, trust off, query_rss off ==================== Based on the mlx5-next branch from git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for dependencies * branch 'ib-guids': (35 commits) IB/mlx5: Implement callbacks for getting VFs GUID attributes IB/ipoib: Add ndo operation for getting VFs GUID attributes IB/core: Add interfaces to get VF node and port GUIDs net/core: Add support for getting VF GUIDs net/mlx5: Add new chain for netfilter flow table offload net/mlx5: Refactor creating fast path prio chains net/mlx5: Accumulate levels for chains prio namespaces net/mlx5: Define fdb tc levels per prio net/mlx5: Rename FDB_* tc related defines to FDB_TC_* defines net/mlx5: Simplify fdb chain and prio eswitch defines IB/mlx5: Load profile according to RoCE enablement state IB/mlx5: Rename profile and init methods net/mlx5: Handle "enable_roce" devlink param net/mlx5: Document flow_steering_mode devlink param devlink: Add new "enable_roce" generic device param net/mlx5: fix spelling mistake "metdata" -> "metadata" net/mlx5: fix kvfree of uninitialized pointer spec IB/mlx5: Introduce and use mlx5_core_is_vf() net/mlx5: E-switch, Enable metadata on own vport net/mlx5: Refactor ingress acl configuration ... Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-22IB/ipoib: Add ndo operation for getting VFs GUID attributesDanit Goldberg1-0/+10
Add ndo operation to the network driver that enables configuring ipoib_get_vf_guid operation. The operation allows to get a VF port and node GUIDs. Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-11-13RDMA/srpt: Report the SCSI residual to the initiatorBart Van Assche1-0/+24
The code added by this patch is similar to the code that already exists in ibmvscsis_determine_resid(). This patch has been tested by running the following command: strace sg_raw -r 1k /dev/sdb 12 00 00 00 60 00 -o inquiry.bin |& grep resid= Link: https://lore.kernel.org/r/20191105214632.183302-1-bvanassche@acm.org Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Honggang Li <honli@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-06Revert "RDMA/srpt: Postpone HCA removal until after configfs directory removal"Bart Van Assche1-5/+1
Although the mentioned patch fixes a use-after-free bug, it introduces a hang during shutdown. Since the latter is worse, revert this patch. Link: https://lore.kernel.org/r/20191101204756.182162-1-bvanassche@acm.org Reported-by: Honggang Li <honli@redhat.com> Fixes: 9b64f7d0bb0a ("RDMA/srpt: Postpone HCA removal until after configfs directory removal") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Honggang Li <honli@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RDMA/srpt: Fix TPG creationBart Van Assche2-29/+73
Unlike the iSCSI target driver, for the SRP target driver it is sufficient if a single TPG can be associated with each RDMA port name. However, users started associating multiple TPGs with RDMA port names. Support this by converting the single TPG in struct srpt_port_id into a list. This patch fixes the following list corruption issue: list_add corruption. prev->next should be next (ffffffffc0a080c0), but was ffffa08a994ce6f0. (prev=ffffa08a994ce6f0). WARNING: CPU: 2 PID: 2597 at lib/list_debug.c:28 __list_add_valid+0x6a/0x70 CPU: 2 PID: 2597 Comm: targetcli Not tainted 5.4.0-rc1.3bfa3c9602a7 #1 RIP: 0010:__list_add_valid+0x6a/0x70 Call Trace: core_tpg_register+0x116/0x200 [target_core_mod] srpt_make_tpg+0x3f/0x60 [ib_srpt] target_fabric_make_tpg+0x41/0x290 [target_core_mod] configfs_mkdir+0x158/0x3e0 vfs_mkdir+0x108/0x1a0 do_mkdirat+0x77/0xe0 do_syscall_64+0x55/0x1d0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Link: https://lore.kernel.org/r/20191023204106.23326-1-bvanassche@acm.org Reported-by: Honggang LI <honli@redhat.com> Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Honggang Li <honli@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix ulp/iser/iser_initiator.c kernel-doc warningsrd.dunlab@gmail.com1-0/+5
Add kernel-doc notation for missing function parameters: ../drivers/infiniband/ulp/iser/iser_initiator.c:365: warning: Function parameter or member 'conn' not described in 'iser_send_command' ../drivers/infiniband/ulp/iser/iser_initiator.c:365: warning: Function parameter or member 'task' not described in 'iser_send_command' ../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'conn' not described in 'iser_send_data_out' ../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'task' not described in 'iser_send_data_out' ../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'hdr' not described in 'iser_send_data_out' Link: https://lore.kernel.org/r/20191010035240.132033937@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix ulp/iser/iser_verbs.c kernel-doc notationrd.dunlab@gmail.com1-22/+38
Various kernel-doc fixes: - fix typos - don't use /** for internal structs or functions - fix Return: kernel-doc formatting - add kernel-doc notation for missing function parameters ../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'ib_conn' not described in 'iser_alloc_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'cmds_max' not described in 'iser_alloc_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'size' not described in 'iser_alloc_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:221: warning: Function parameter or member 'ib_conn' not described in 'iser_free_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'ib_conn' not described in 'iser_alloc_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'cmds_max' not described in 'iser_alloc_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'size' not described in 'iser_alloc_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:338: warning: Function parameter or member 'ib_conn' not described in 'iser_free_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:568: warning: Function parameter or member 'iser_conn' not described in 'iser_conn_release' ../drivers/infiniband/ulp/iser/iser_verbs.c:603: warning: Function parameter or member 'iser_conn' not described in 'iser_conn_terminate' ../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'signal' not described in 'iser_post_send' ../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'ib_conn' not described in 'iser_post_send' ../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'tx_desc' not described in 'iser_post_send' Link: https://lore.kernel.org/r/20191010035240.070520193@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix ulp/srpt/ib_srpt.h kernel-doc notationrd.dunlab@gmail.com1-5/+2
Fix kernel-doc warnings (typos or renames) in ib_srpt.h: ../drivers/infiniband/ulp/srpt/ib_srpt.h:419: warning: Function parameter or member 'port_guid_id' not described in 'srpt_port' ../drivers/infiniband/ulp/srpt/ib_srpt.h:419: warning: Function parameter or member 'port_gid_id' not described in 'srpt_port' Link: https://lore.kernel.org/r/20191010035239.950150496@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix ulp/opa_vnic/opa_vnic_internal.h kernel-doc notationrd.dunlab@gmail.com1-4/+4
Remove kernel-doc notation on 4 structs since they are internal and none of the struct fields/members are described. This removes 45 kernel-doc warnings. Link: https://lore.kernel.org/r/20191010035239.818405496@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix ulp/iser/iscsi_iser.h kernel-doc warningsrd.dunlab@gmail.com1-7/+11
Fix kernel-doc warnings and typos/spellos. ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'dma_addr' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'cqe' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'reg_wr' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'send_wr' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:254: warning: Function parameter or member 'inv_wr' not described in 'iser_tx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:277: warning: Function parameter or member 'cqe' not described in 'iser_rx_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:296: warning: Function parameter or member 'rsp' not described in 'iser_login_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:339: warning: Function parameter or member 'reg_mem' not described in 'iser_reg_ops' ../drivers/infiniband/ulp/iser/iscsi_iser.h:399: warning: Function parameter or member 'all_list' not described in 'iser_fr_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:413: warning: Function parameter or member 'all_list' not described in 'iser_fr_pool' ../drivers/infiniband/ulp/iser/iscsi_iser.h:439: warning: Function parameter or member 'reg_cqe' not described in 'ib_conn' ../drivers/infiniband/ulp/iser/iscsi_iser.h:491: warning: Function parameter or member 'snd_w_inv' not described in 'iser_conn' This leaves 2 "member not described" warnings that I don't know how to fix: ../drivers/infiniband/ulp/iser/iscsi_iser.h:401: warning: Function parameter or member 'all_list' not described in 'iser_fr_desc' ../drivers/infiniband/ulp/iser/iscsi_iser.h:415: warning: Function parameter or member 'all_list' not described in 'iser_fr_pool' Link: https://lore.kernel.org/r/20191010035239.756365352@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22infiniband: fix ulp/iser/iscsi_iser.[hc] kernel-doc notationrd.dunlab@gmail.com2-5/+5
Fix struct name in kernel-doc notation to match the struct name below it. Fix one typo (spello). Fix formatting as expected for kernel-doc notation. Fix parameter name to match the function's parameter name to eliminate a kernel-doc warning. ../drivers/infiniband/ulp/iser/iscsi_iser.c:815: warning: Function parameter or member 'non_blocking' not described in 'iscsi_iser_ep_connect' Link: https://lore.kernel.org/r/20191010035239.623888112@gmail.com Signed-off-by: Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-21ib/srp: Add missing new line after displaying fast_io_fail_tmo paramDonald Dutile1-2/+2
Long-time missing new-line in sysfs output. Simply add it. Signed-off-by: Donald Dutile <ddutile@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20191009164937.21989-1-ddutile@redhat.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-10-08RDMA/iser: Use iser_err instead of pr_err for loggingMax Gurtovoy1-2/+2
Make sure all the debug prints in ib_iser module use the common driver logger. Link: https://lore.kernel.org/r/1570366580-24097-1-git-send-email-maxg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-08RDMA/srp: Calculate max_it_iu_size if remote max_it_iu length availableHonggang Li1-4/+14
The default maximum immediate size is too big for old srp clients, which do not support immediate data. According to the SRP and SRP-2 specifications, the IOControllerProfile attributes for SRP target ports contains the maximum initiator to target iu length. The maximum initiator to target iu length can be obtained by sending MAD packets to query subnet manager port and SRP target ports. We should calculate the max_it_iu_size instead of the default value, when remote maximum initiator to target iu length available. Link: https://lore.kernel.org/r/20190927174352.7800-2-honli@redhat.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Honggang Li <honli@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-08RDMA/srp: Add parse function for maximum initiator to target IU sizeHonggang Li2-0/+11
According to SRP specifications 'srp-r16a' and 'srp2r06', IOControllerProfile attributes for SRP target port include the maximum initiator to target IU size. SRP connection daemons, such as srp_daemon, can get the value from the subnet manager. The SRP connection daemon can pass this value to kernel. This patch adds a parse function for it. Upstream commit [1] enables the kernel parameter, 'use_imm_data', by default. [1] also use (8 * 1024) as the default value for kernel parameter 'max_imm_data'. With those default values, the maximum initiator to target IU size will be 8260. In case the SRPT modules, which include the in-tree 'ib_srpt.ko' module, do not support SRP-2 'immediate data' feature, the default maximum initiator to target IU size is significantly smaller than 8260. For 'ib_srpt.ko' module, which built from source before [2], the default maximum initiator to target IU is 2116. [1] introduces a regression issue for old srp targets with default kernel parameters, as the connection will be rejected because of a too large maximum initiator to target IU size. [1] commit 882981f4a411 ("RDMA/srp: Add support for immediate data") [2] commit 5dabcd0456d7 ("RDMA/srpt: Add support for immediate data") Link: https://lore.kernel.org/r/20190927174352.7800-1-honli@redhat.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Honggang Li <honli@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/srpt: Postpone HCA removal until after configfs directory removalBart Van Assche1-1/+4
A shortcoming of the SCSI target core is that it does not have an API for removing tpg or wwn objects. Wait until these directories have been removed before allowing HCA removal to finish. See also Bart Van Assche, "Re: Why using configfs as the only interface is wrong for a storage target", 2011-02-07 (https://www.spinics.net/lists/linux-scsi/msg50248.html). This patch fixes the following kernel crash: ================================================================== BUG: KASAN: use-after-free in __configfs_open_file.isra.4+0x1a8/0x400 Read of size 8 at addr ffff88811880b690 by task restart-lio-srp/1215 CPU: 1 PID: 1215 Comm: restart-lio-srp Not tainted 5.3.0-dbg+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: dump_stack+0x86/0xca print_address_description+0x74/0x32d __kasan_report.cold.6+0x1b/0x36 kasan_report+0x12/0x17 __asan_load8+0x54/0x90 __configfs_open_file.isra.4+0x1a8/0x400 configfs_open_file+0x13/0x20 do_dentry_open+0x2b1/0x770 vfs_open+0x58/0x60 path_openat+0x5fa/0x14b0 do_filp_open+0x115/0x180 do_sys_open+0x1d4/0x2a0 __x64_sys_openat+0x59/0x70 do_syscall_64+0x6b/0x2d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f2f2bd3fcce Code: 25 00 00 41 00 3d 00 00 41 00 74 48 48 8d 05 19 d7 0d 00 8b 00 85 c0 75 69 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a6 00 00 00 48 8b 4c 24 28 64 48 33 0c 25 RSP: 002b:00007ffd155f7850 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 0000564609ba88e0 RCX: 00007f2f2bd3fcce RDX: 0000000000000241 RSI: 0000564609ba8cf0 RDI: 00000000ffffff9c RBP: 00007ffd155f7950 R08: 0000000000000000 R09: 0000000000000020 R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 0000564609ba8cf0 Allocated by task 995: save_stack+0x21/0x90 __kasan_kmalloc.constprop.9+0xc7/0xd0 kasan_kmalloc+0x9/0x10 __kmalloc+0x153/0x370 srpt_add_one+0x4f/0x561 [ib_srpt] add_client_context+0x251/0x290 [ib_core] ib_register_client+0x1da/0x220 [ib_core] iblock_get_alignment_offset_lbas+0x6b/0x100 [target_core_iblock] do_one_initcall+0xcd/0x43a do_init_module+0x103/0x380 load_module+0x3b77/0x3eb0 __do_sys_finit_module+0x12d/0x1b0 __x64_sys_finit_module+0x43/0x50 do_syscall_64+0x6b/0x2d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 1221: save_stack+0x21/0x90 __kasan_slab_free+0x139/0x190 kasan_slab_free+0xe/0x10 slab_free_freelist_hook+0x67/0x1e0 kfree+0xcb/0x2a0 srpt_remove_one+0x596/0x670 [ib_srpt] remove_client_context+0x9a/0xe0 [ib_core] disable_device+0x106/0x1b0 [ib_core] __ib_unregister_device+0x5f/0xf0 [ib_core] ib_unregister_driver+0x11a/0x170 [ib_core] 0xffffffffa087f666 __x64_sys_delete_module+0x1f8/0x2c0 do_syscall_64+0x6b/0x2d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff88811880b300 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 912 bytes inside of 4096-byte region [ffff88811880b300, ffff88811880c300) The buggy address belongs to the page: page:ffffea0004620200 refcount:1 mapcount:0 mapping:ffff88811ac0de00 index:0x0 compound_mapcount: 0 flags: 0x2fff000000010200(slab|head) raw: 2fff000000010200 dead000000000100 dead000000000122 ffff88811ac0de00 raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88811880b580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88811880b600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88811880b680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88811880b700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88811880b780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Link: https://lore.kernel.org/r/20190930231707.48259-16-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/srpt: Make the code for handling port identities more systematicBart Van Assche2-32/+57
Introduce a new data structure for the information about an RDMA port name. This patch does not change any functionality. Link: https://lore.kernel.org/r/20190930231707.48259-15-bvanassche@acm.org Cc: Honggang LI <honli@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/srpt: Rework the code that waits until an RDMA port is no longer in useBart Van Assche2-23/+25
The current implementation does not wait until srpt_release_channel() has finished and hence can trigger a use-after-free. Rework srpt_release_sport() such that it waits until srpt_release_channel() has finished. This patch fixes the following KASAN complaint: ================================================================== BUG: KASAN: use-after-free in srpt_free_ioctx.part.23+0x42/0x100 [ib_srpt] Read of size 8 at addr ffff888115c71100 by task kworker/4:3/807 CPU: 4 PID: 807 Comm: kworker/4:3 Not tainted 5.3.0-dbg+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: events srpt_release_channel_work [ib_srpt] Call Trace: dump_stack+0x86/0xca print_address_description+0x74/0x32d __kasan_report.cold.6+0x1b/0x36 kasan_report+0x12/0x17 __asan_load8+0x54/0x90 srpt_free_ioctx.part.23+0x42/0x100 [ib_srpt] srpt_free_ioctx_ring.part.24+0x50/0x80 [ib_srpt] srpt_release_channel_work+0x2ad/0x390 [ib_srpt] process_one_work+0x51a/0xa60 worker_thread+0x67/0x5b0 kthread+0x1dc/0x200 ret_from_fork+0x24/0x30 Allocated by task 984: save_stack+0x21/0x90 __kasan_kmalloc.constprop.9+0xc7/0xd0 kasan_kmalloc+0x9/0x10 __kmalloc+0x153/0x370 srpt_add_one+0x4f/0x570 [ib_srpt] add_client_context+0x251/0x290 [ib_core] ib_register_client+0x1da/0x220 [ib_core] iblock_get_alignment_offset_lbas+0x6b/0x100 [target_core_iblock] do_one_initcall+0xcd/0x43a do_init_module+0x103/0x380 load_module+0x3b77/0x3eb0 __do_sys_finit_module+0x12d/0x1b0 __x64_sys_finit_module+0x43/0x50 do_syscall_64+0x6b/0x2d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 1128: save_stack+0x21/0x90 __kasan_slab_free+0x139/0x190 kasan_slab_free+0xe/0x10 slab_free_freelist_hook+0x67/0x1e0 kfree+0xcb/0x2a0 srpt_remove_one+0x569/0x5b0 [ib_srpt] remove_client_context+0x9a/0xe0 [ib_core] disable_device+0x106/0x1b0 [ib_core] __ib_unregister_device+0x5f/0xf0 [ib_core] ib_unregister_device_and_put+0x48/0x60 [ib_core] nldev_dellink+0x120/0x180 [ib_core] rdma_nl_rcv+0x287/0x480 [ib_core] netlink_unicast+0x2cc/0x370 netlink_sendmsg+0x3b1/0x630 __sys_sendto+0x1db/0x290 __x64_sys_sendto+0x80/0xa0 do_syscall_64+0x6b/0x2d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff888115c71100 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 0 bytes inside of 4096-byte region [ffff888115c71100, ffff888115c72100) The buggy address belongs to the page: page:ffffea0004571c00 refcount:1 mapcount:0 mapping:ffff88811ac0de00 index:0xffff888115c70000 compound_mapcount: 0 flags: 0x2fff000000010200(slab|head) raw: 2fff000000010200 ffffea00045ac408 ffffea0004593208 ffff88811ac0de00 raw: ffff888115c70000 0000000000070002 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888115c71000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888115c71080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888115c71100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888115c71180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888115c71200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Link: https://lore.kernel.org/r/20190930231707.48259-14-bvanassche@acm.org Cc: Honggang LI <honli@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/srpt: Rework the approach for closing an RDMA channelBart Van Assche2-23/+10
Instead of relying on a waitqueue, report when the identity of an RDMA channel can be reused through a completion. Link: https://lore.kernel.org/r/20190930231707.48259-13-bvanassche@acm.org Cc: Honggang LI <honli@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/srpt: Improve a debug messageBart Van Assche1-1/+2
The ib_srpt driver uses two different identifiers while registering a session with the LIO core. Report both identifiers if the modified pr_debug() statement is enabled. Link: https://lore.kernel.org/r/20190930231707.48259-12-bvanassche@acm.org Cc: Honggang LI <honli@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/srpt: Fix handling of iWARP loginsBart Van Assche1-1/+2
The path_rec pointer is NULL set for IB and RoCE logins but not for iWARP logins. Hence check the path_rec pointer before dereferencing it. Link: https://lore.kernel.org/r/20190930231707.48259-11-bvanassche@acm.org Cc: Honggang LI <honli@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/srpt: Fix handling of SR-IOV and iWARP portsBart Van Assche1-22/+19
Management datagrams (MADs) are not supported by SR-IOV VFs nor by iWARP ports. Support SR-IOV VFs and iWARP ports by only logging an error message if MAD handler registration fails. Link: https://lore.kernel.org/r/20190930231707.48259-10-bvanassche@acm.org Cc: Honggang LI <honli@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/srp: Make route resolving error messages more informativeBart Van Assche1-2/+2
The IPv6 scope ID is essential when setting up an iWARP connection between IPv6 link-local addresses. Report the scope ID in error messages. Link: https://lore.kernel.org/r/20190930231707.48259-9-bvanassche@acm.org Cc: Honggang LI <honli@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/srp: Honor the max_send_sge device attributeBart Van Assche2-2/+6
Instead of assuming that max_send_sge >= 3, restrict the number of scatter gather elements to what is supported by the RDMA adapter. Link: https://lore.kernel.org/r/20190930231707.48259-8-bvanassche@acm.org Cc: Honggang LI <honli@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04RDMA/srp: Remove two castsBart Van Assche2-2/+4
This patch does not change any functionality. Link: https://lore.kernel.org/r/20190930231707.48259-7-bvanassche@acm.org Cc: Honggang LI <honli@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-01IB/iser: remove redundant macro definitionsMax Gurtovoy4-11/+7
Use the general linux definition for 4K and retrieve the rest from it. Link: https://lore.kernel.org/r/1569359148-12312-1-git-send-email-maxg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-01IB/iser: bound protection_sg size by data_sg sizeMax Gurtovoy1-0/+1
In case we don't set the sg_prot_tablesize, the scsi layer assign the default size (65535 entries). We should limit this size since we should take into consideration the underlaying device capability. This cap is considered when calculating the sg_tablesize. Otherwise, for example, we can get that /sys/block/sdb/queue/max_segments is 128 and /sys/block/sdb/queue/max_integrity_segments is 65535. Link: https://lore.kernel.org/r/1569359027-10987-1-git-send-email-maxg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-01IB/iser: add unlikely checks in the fast pathMax Gurtovoy2-3/+3
ib_post_send, ib_post_recv and ib_dma_map_sg operations should succeed unless something unusual happened to the ib device. Link: https://lore.kernel.org/r/1569274369-29217-1-git-send-email-maxg@mellanox.com Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2-5/+6
Pull RDMA subsystem updates from Jason Gunthorpe: "This cycle mainly saw lots of bug fixes and clean up code across the core code and several drivers, few new functional changes were made. - Many cleanup and bug fixes for hns - Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed, bnxt_re, efa - Share the query_port code between all the iWarp drivers - General rework and cleanup of the ODP MR umem code to fit better with the mmu notifier get/put scheme - Support rdma netlink in non init_net name spaces - mlx5 support for XRC devx and DC ODP" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits) RDMA: Fix double-free in srq creation error flow RDMA/efa: Fix incorrect error print IB/mlx5: Free mpi in mp_slave mode IB/mlx5: Use the original address for the page during free_pages RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp" RDMA/hns: Package operations of rq inline buffer into separate functions RDMA/hns: Optimize cmd init and mode selection for hip08 IB/hfi1: Define variables as unsigned long to fix KASAN warning IB/{rdmavt, hfi1, qib}: Add a counter for credit waits IB/hfi1: Add traces for TID RDMA READ RDMA/siw: Relax from kmap_atomic() use in TX path IB/iser: Support up to 16MB data transfer in a single command RDMA/siw: Fix page address mapping in TX path RDMA: Fix goto target to release the allocated memory RDMA/usnic: Avoid overly large buffers on stack RDMA/odp: Add missing cast for 32 bit RDMA/hns: Use devm_platform_ioremap_resource() to simplify code Documentation/infiniband: update name of some functions RDMA/cma: Fix false error message RDMA/hns: Fix wrong assignment of qp_access_flags ...
2019-09-13IB/iser: Support up to 16MB data transfer in a single commandSergey Gorenko1-3/+4
Maximum supported IO size is 8MB for the iSER driver. The current value is limited by the ISCSI_ISER_MAX_SG_TABLESIZE macro. But the driver is able to handle 16MB IOs without any significant changes. Increasing this limit can be useful for the storage arrays which are fine tuned for IOs larger than 8 MB. This commit allows to configure maximum IO size up to 16MB using the max_sectors module parameter. Link: https://lore.kernel.org/r/20190912103534.18210-1-sergeygo@mellanox.com Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-05rdma: Enable ib_alloc_cq to spread work over a device's comp_vectorsChuck Lever1-2/+2
Send and Receive completion is handled on a single CPU selected at the time each Completion Queue is allocated. Typically this is when an initiator instantiates an RDMA transport, or when a target accepts an RDMA connection. Some ULPs cannot open a connection per CPU to spread completion workload across available CPUs and MSI vectors. For such ULPs, provide an API that allows the RDMA core to select a completion vector based on the device's complement of available comp_vecs. ULPs that invoke ib_alloc_cq() with only comp_vector 0 are converted to use the new API so that their completion workloads interfere less with each other. Suggested-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Cc: <linux-cifs@vger.kernel.org> Cc: <v9fs-developer@lists.sourceforge.net> Link: https://lore.kernel.org/r/20190729171923.13428.52555.stgit@manet.1015granger.net Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-30net: Use skb_frag_off accessorsJonathan Lemon1-1/+2
Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-20Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-43/+10
Pull SCSI fixes from James Bottomley: "This is the final round of mostly small fixes in our initial submit. It's mostly minor fixes and driver updates. The only change of note is adding a virt_boundary_mask to the SCSI host and host template to parametrise this for NVMe devices instead of having them do a call in slave_alloc. It's a fairly straightforward conversion except in the two NVMe handling drivers that didn't set it who now have a virtual infinity parameter added" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: megaraid_sas: set an unlimited max_segment_size scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs scsi: IB/srp: set virt_boundary_mask in the scsi host scsi: IB/iser: set virt_boundary_mask in the scsi host scsi: storvsc: set virt_boundary_mask in the scsi host template scsi: ufshcd: set max_segment_size in the scsi host template scsi: core: take the DMA max mapping size into account scsi: core: add a host / host template field for the virt boundary scsi: core: Fix race on creating sense cache scsi: sd_zbc: Fix compilation warning scsi: libfc: fix null pointer dereference on a null lport scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized scsi: zfcp: fix request object use-after-free in send path causing wrong traces scsi: zfcp: fix request object use-after-free in send path causing seqno errors scsi: megaraid_sas: Update driver version to 07.710.50.00 scsi: megaraid_sas: Add module parameter for FW Async event logging scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers scsi: megaraid_sas: Fix calculation of target ID scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade ...
2019-07-16scsi: IB/srp: set virt_boundary_mask in the scsi hostChristoph Hellwig1-15/+3
This ensures all proper DMA layer handling is taken care of by the SCSI midlayer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-16scsi: IB/iser: set virt_boundary_mask in the scsi hostChristoph Hellwig1-28/+7
This ensures all proper DMA layer handling is taken care of by the SCSI midlayer. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds12-278/+174
Pull rdma updates from Jason Gunthorpe: "A smaller cycle this time. Notably we see another new driver, 'Soft iWarp', and the deletion of an ancient unused driver for nes. - Revise and simplify the signature offload RDMA MR APIs - More progress on hoisting object allocation boiler plate code out of the drivers - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion - Removal of obsolete ib_ucm chardev and nes driver - netlink based discovery of chardevs and autoloading of the modules providing them - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma - New driver 'siw' for software based iWarp running on top of netdev, much like rxe's software RoCE. - mlx5 feature to report events in their raw devx format to userspace - Expose per-object counters through rdma tool - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core from netdev" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits) RMDA/siw: Require a 64 bit arch RDMA/siw: Mark expected switch fall-throughs RDMA/core: Fix -Wunused-const-variable warnings rdma/siw: Remove set but not used variable 's' rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS RDMA/siw: Add missing rtnl_lock around access to ifa rdma/siw: Use proper enumerated type in map_cqe_status RDMA/siw: Remove unnecessary kthread create/destroy printouts IB/rdmavt: Fix variable shadowing issue in rvt_create_cq RDMA/core: Fix race when resolving IP address RDMA/core: Make rdma_counter.h compile stand alone IB/core: Work on the caller socket net namespace in nldev_newlink() RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM RDMA/mlx5: Set RDMA DIM to be enabled by default RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink RDMA/core: Provide RDMA DIM support for ULPs linux/dim: Implement RDMA adaptive moderation (DIM) IB/mlx5: Report correctly tag matching rendezvous capability docs: infiniband: add it to the driver-api bookset IB/mlx5: Implement VHCA tunnel mechanism in DEVX ...
2019-07-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-19/+2
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs, mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the removal of the osst driver (I heard from Willem privately that he would like the driver removed because all his test hardware has failed). Plus number of minor changes, spelling fixes and other trivia. The big merge conflict this time around is the SPDX licence tags. Following discussion on linux-next, we believe our version to be more accurate than the one in the tree, so the resolution is to take our version for all the SPDX conflicts" Note on the SPDX license tag conversion conflicts: the SCSI tree had done its own SPDX conversion, which in some cases conflicted with the treewide ones done by Thomas & co. In almost all cases, the conflicts were purely syntactic: the SCSI tree used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the treewide conversion had used the new-style ones ("GPL-2.0-only" and "GPL-2.0-or-later"). In these cases I picked the new-style one. In a few cases, the SPDX conversion was actually different, though. As explained by James above, and in more detail in a pre-pull-request thread: "The other problem is actually substantive: In the libsas code Luben Tuikov originally specified gpl 2.0 only by dint of stating: * This file is licensed under GPLv2. In all the libsas files, but then muddied the water by quoting GPLv2 verbatim (which includes the or later than language). So for these files Christoph did the conversion to v2 only SPDX tags and Thomas converted to v2 or later tags" So in those cases, where the spdx tag substantially mattered, I took the SCSI tree conversion of it, but then also took the opportunity to turn the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag. Similarly, when there were whitespace differences or other differences to the comments around the copyright notices, I took the version from the SCSI tree as being the more specific conversion. Finally, in the spdx conversions that had no conflicts (because the treewide ones hadn't been done for those files), I just took the SCSI tree version as-is, even if it was old-style. The old-style conversions are perfectly valid, even if the "-only" and "-or-later" versions are perhaps more descriptive. * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits) scsi: qla2xxx: move IO flush to the front of NVME rport unregistration scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition scsi: qla2xxx: on session delete, return nvme cmd scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1 scsi: megaraid_sas: Introduce various Aero performance modes scsi: megaraid_sas: Use high IOPS queues based on IO workload scsi: megaraid_sas: Set affinity for high IOPS reply queues scsi: megaraid_sas: Enable coalescing for high IOPS queues scsi: megaraid_sas: Add support for High IOPS queues scsi: megaraid_sas: Add support for MPI toolbox commands scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD scsi: megaraid_sas: Handle sequence JBOD map failure at driver level scsi: megaraid_sas: Don't send FPIO to RL Bypass queue scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout scsi: megaraid_sas: Call disable_irq from process IRQ poll scsi: megaraid_sas: Remove few debug counters from IO path ...
2019-07-04IB/ipoib: Add child to parent list only if device initializedValentine Fatiev1-14/+20
Despite failure in ipoib_dev_init() we continue with initialization flow and creation of child device. It causes to the situation where this child device is added too early to parent device list. Change the logic, so in case of failure we properly return error from ipoib_dev_init() and add child only in success path. Fixes: eaeb39842508 ("IB/ipoib: Move init code to ndo_init") Signed-off-by: Valentine Fatiev <valentinef@mellanox.com> Reviewed-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-03IB/ipoib: Remove memset after vzalloc in ipoib_cm.cFuqian Huang1-1/+0
vzalloc has already zeroed the memory. So a memset is unneeded. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28Merge tag 'v5.2-rc6' into rdma.git for-nextJason Gunthorpe13-10/+29
For dependencies in next patches. Resolve conflicts: - Use uverbs_get_cleared_udata() with new cq allocation flow - Continue to delete nes despite SPDX conflict - Resolve list appends in mlx5_command_str() - Use u16 for vport_rule stuff - Resolve list appends in struct ib_client Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-25docs: infiniband: convert docs to ReST and rename to *.rstMauro Carvalho Chehab1-1/+1
The InfiniBand docs are plain text with no markups. So, all we needed to do were to add the title markups and some markup sequences in order to properly parse tables, lists and literal blocks. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/rw: Use IB_WR_REG_MR_INTEGRITY for PI handoverIsrael Rukshin1-2/+2
Replace the old signature handover API with the new one. The new API simplifes PI handover code complexity for ULPs and improve performance. For RW API it will reduce the maximum number of work requests per task and the need of dealing with multiple MRs (and their registrations and invalidations) per task. All the mappings and registration of the data and the protection buffers is done by the LLD using a single WR and a special MR type (IB_MR_TYPE_INTEGRITY) for the PI handover operation. The setup of the tested benchmark (using iSER ULP): - 2 servers with 24 cores (1 initiator and 1 target) - ConnectX-4/ConnectX-5 adapters - 24 target sessions with 1 LUN each - ramdisk backstore - PI active Performance results running fio (24 jobs, 128 iodepth) using write_generate=1 and read_verify=1 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1243.3K/1182.3K 1725.1K/1680.2K 4k 571233/528835 743293/748259 32k 72388/71086 71789/93573 Using write_generate=0 and read_verify=0 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1572.1K/1427.2K 1823.5K/1724.3K 4k 921992/916194 753772/768267 32k 75052/73960 73180/95484 There is a performance degradation when writing big block sizes. Degradation is caused by the complexity of combining multiple indirections and perform RDMA READ operation from it. This will be fixed in the following patches by reducing the indirections if possible. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Rename signature qp create flag and signature device capabilityIsrael Rukshin2-4/+4
Rename IB_QP_CREATE_SIGNATURE_EN to IB_QP_CREATE_INTEGRITY_EN and IB_DEVICE_SIGNATURE_HANDOVER to IB_DEVICE_INTEGRITY_HANDOVER. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24IB/iser: Unwind WR union at iser_tx_descIsrael Rukshin4-38/+27
After decreasing WRs array size from 7 to 3 it is more readable to give each WR a descriptive name. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24IB/iser: Use IB_WR_REG_MR_INTEGRITY for PI handoverIsrael Rukshin4-193/+95
Using this new API reduces iSER code complexity. It also reduces the maximum number of work requests per task and the need of dealing with multiple MRs (and their registrations and invalidations) per task. It is done by using a single WR and a special MR type (IB_MR_TYPE_INTEGRITY) for PI operation. The setup of the tested benchmark: - 2 servers with 24 cores (1 initiator and 1 target) - 24 target sessions with 1 LUN each - ramdisk backstore - PI active Performance results running fio (24 jobs, 128 iodepth) using write_generate=0 and read_verify=0 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1236.6K/1164.3K 1357.2K/1332.8K 1k 1196.5K/1163.8K 1348.4K/1262.7K 2k 1016.7K/921950 1003.7K/931230 4k 662728/600545 595423/501513 8k 385954/384345 333775/277090 16k 222864/222820 170317/170671 32k 116869/114896 82331/82244 64k 55205/54931 40264/40021 Using write_generate=1 and read_verify=1 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1090.1K/1030.9K 1303.9K/1101.4K 1k 1057.7K/904583 1318.4K/988085 2k 965226/638799 1008.6K/692514 4k 555479/410151 542414/414517 8k 298675/224964 264729/237508 16k 133485/122481 164625/138647 32k 74329/67615 80143/78743 64k 35716/35519 39294/37334 We get performance improvement at all block sizes. The most significant improvement is when writing 4k bs (almost 30% more iops). Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.