aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/ulp (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-07-14IB/core: Destroy multcast_idr on module exitJohannes Thumshirn1-0/+1
Destroy multcast_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Optimize do_slave_initDoug Ledford1-7/+9
There is little chance our memory allocation will fail, so we can combine initializing the work structs with allocating them instead of looping through all of them once to allocate and again to initialize. Then when we need to actually find out if our device is up or in the process of going down, have all of our work structs batched up, take the spin_lock once and only once, and do all of the batch under the one spin_lock invocation instead of incurring all of the locked memory cycles we would otherwise incur to take/release the spin_lock over and over again. Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Fix memory leak in do_slave_initDoug Ledford1-0/+2
We create a number of work structs to be queued up to a workqueue, and on completion of the workqueue handler, the workqueue handler frees the allocated memory. If, however, we don't queue the work struct because the device is going down, then we need to free the memory ourselves. Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Optimize freeing of items on error unwindManinder Singh1-5/+3
On failure, we loop through all possible pointers and test them before calling kfree. But really, why even attempt to free items we didn't allocate when we can easily loop through exactly and only the devices for which the original memory allocation succeeded and free just those. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Fix use of flow-counters for process_madOr Gerlitz1-10/+19
For IB links, reading HCA flow counters through iboe_process_mad() should be used when mlx4_ib_process_mad() is invoked only for VFs PMA queries and exactly nothing else. Fixes: 7193a141eb74 ('IB/mlx4: Set VF to read from QP counters') Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ipath: Convert use of __constant_<foo> to <foo>Vaishali Thakkar1-2/+2
In little endian cases, the macros be16_to_cpu and cpu_to_be64 unfolds to __swab{16,64} which provides special case for constants. In big endian cases, __constant_be16_to_cpu and be16_to_cpu expand directly to the same expression. The same applies for __constant_cpu_to_be64 and cpu_to_be64. So, replace __constant_be16_to_cpu with be16_to_cpu and __constant_cpu_to_be64 with cpu_to_be64, with the goal of getting rid of the definition of __constant_be16_to_cpu and __constant_cpu_to_be64 completely. Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ipoib: Set MTU to max allowed by mode when mode changesErez Shitrit1-0/+1
When switching between modes (datagram / connected) change the MTU accordingly. datagram mode up to 4K, connected mode up to (64K - 0x10). Signed-off-by: ELi Cohen <eli@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ipoib: Scatter-Gather support in connected modeYuval Shaia4-46/+54
By default, IPoIB-CM driver uses 64k MTU. Larger MTU gives better performance. This MTU plus overhead puts the memory allocation for IP based packets at 32 4k pages (order 5), which have to be contiguous. When the system memory under pressure, it was observed that allocating 128k contiguous physical memory is difficult and causes serious errors (such as system becomes unusable). This enhancement resolve the issue by removing the physically contiguous memory requirement using Scatter/Gather feature that exists in Linux stack. With this fix Scatter-Gather will be supported also in connected mode. This change reverts some of the change made in commit e112373fd6aa ("IPoIB/cm: Reduce connected mode TX object size"). The ability to use SG in IPoIB CM is possible because the coupling between NETIF_F_SG and NETIF_F_CSUM was removed in commit ec5f06156423 ("net: Kill link between CSUM and SG features.") Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Christian Marie <christian@ponies.io> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ucm: Fix bitmap wrap when devnum > IB_UCM_MAX_DEVICESCarol L Soto1-2/+2
ib_ucm_release_dev clears the wrong bit if devnum is greater than IB_UCM_MAX_DEVICES. Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flushHaggai Eran1-6/+7
__ipoib_ib_dev_flush calls itself recursively on child devices, and lockdep complains about locking vlan_rwsem twice (see below). Use down_read_nested instead of down_read to prevent the warning. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc4+ #36 Tainted: G O --------------------------------------------- kworker/u20:2/261 is trying to acquire lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] but task is already holding lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&priv->vlan_rwsem); lock(&priv->vlan_rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u20:2/261: #0: ("%s""ipoib_flush"){.+.+..}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #1: ((&priv->flush_heavy)){+.+...}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #2: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] stack backtrace: CPU: 3 PID: 261 Comm: kworker/u20:2 Tainted: G O 4.1.0-rc4+ #36 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 Workqueue: ipoib_flush ipoib_ib_dev_flush_heavy [ib_ipoib] ffff8801c6c54790 ffff8801c9927af8 ffffffff81665238 0000000000000001 ffffffff825b5b30 ffff8801c9927bd8 ffffffff810bba51 ffff880100000000 ffffffff00000001 ffff880100000001 ffff8801c6c55428 ffff8801c6c54790 Call Trace: [<ffffffff81665238>] dump_stack+0x4f/0x6f [<ffffffff810bba51>] __lock_acquire+0x741/0x1820 [<ffffffff810bcbf8>] lock_acquire+0xc8/0x240 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffff81669d2c>] down_read+0x4c/0x70 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e4a>] __ipoib_ib_dev_flush+0x5a/0x2b0 [ib_ipoib] [<ffffffffa07920ba>] ipoib_ib_dev_flush_heavy+0x1a/0x20 [ib_ipoib] [<ffffffff81082871>] process_one_work+0x201/0x760 [<ffffffff810827cc>] ? process_one_work+0x15c/0x760 [<ffffffff81082ef0>] worker_thread+0x120/0x4d0 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81088b7e>] kthread+0xfe/0x120 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8166c6e2>] ret_from_fork+0x42/0x70 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/ucma: Fix lockdep warning in ucma_lock_filesHaggai Eran1-2/+2
The ucma_lock_files() locks the mut mutex on two files, e.g. for migrating an ID. Use mutex_lock_nested() to prevent the warning below. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc6-hmm+ #40 Tainted: G O --------------------------------------------- pingpong_rpc_se/10260 is trying to acquire lock: (&file->mut){+.+.+.}, at: [<ffffffffa047ac55>] ucma_migrate_id+0xc5/0x248 [rdma_ucm] but task is already holding lock: (&file->mut){+.+.+.}, at: [<ffffffffa047ac4b>] ucma_migrate_id+0xbb/0x248 [rdma_ucm] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&file->mut); lock(&file->mut); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by pingpong_rpc_se/10260: #0: (&file->mut){+.+.+.}, at: [<ffffffffa047ac4b>] ucma_migrate_id+0xbb/0x248 [rdma_ucm] stack backtrace: CPU: 0 PID: 10260 Comm: pingpong_rpc_se Tainted: G O 4.1.0-rc6-hmm+ #40 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 ffff8801f85b63d0 ffff880195677b58 ffffffff81668f49 0000000000000001 ffffffff825cbbe0 ffff880195677c38 ffffffff810bb991 ffff880100000000 ffff880100000000 ffff880100000001 ffff8801f85b7010 ffffffff8121bee9 Call Trace: [<ffffffff81668f49>] dump_stack+0x4f/0x6e [<ffffffff810bb991>] __lock_acquire+0x741/0x1820 [<ffffffff8121bee9>] ? dput+0x29/0x320 [<ffffffff810bcb38>] lock_acquire+0xc8/0x240 [<ffffffffa047ac55>] ? ucma_migrate_id+0xc5/0x248 [rdma_ucm] [<ffffffff8166b901>] ? mutex_lock_nested+0x291/0x3e0 [<ffffffff8166b6d5>] mutex_lock_nested+0x65/0x3e0 [<ffffffffa047ac55>] ? ucma_migrate_id+0xc5/0x248 [rdma_ucm] [<ffffffff810baeed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8166b66e>] ? mutex_unlock+0xe/0x10 [<ffffffffa047ac55>] ucma_migrate_id+0xc5/0x248 [rdma_ucm] [<ffffffffa0478474>] ucma_write+0xa4/0xb0 [rdma_ucm] [<ffffffff81200674>] __vfs_write+0x34/0x100 [<ffffffff8112427c>] ? __audit_syscall_entry+0xac/0x110 [<ffffffff810ec055>] ? current_kernel_time+0xc5/0xe0 [<ffffffff812aa4d3>] ? security_file_permission+0x23/0x90 [<ffffffff8120088d>] ? rw_verify_area+0x5d/0xe0 [<ffffffff812009bb>] vfs_write+0xab/0x120 [<ffffffff81201519>] SyS_write+0x59/0xd0 [<ffffffff8112427c>] ? __audit_syscall_entry+0xac/0x110 [<ffffffff8166ffee>] system_call_fastpath+0x12/0x76 Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14rds: rds_ib_device.refcount overflowWengang Wang1-1/+3
Fixes: 3e0249f9c05c ("RDS/IB: add refcount tracking to struct rds_ib_device") There lacks a dropping on rds_ib_device.refcount in case rds_ib_alloc_fmr failed(mr pool running out). this lead to the refcount overflow. A complain in line 117(see following) is seen. From vmcore: s_ib_rdma_mr_pool_depleted is 2147485544 and rds_ibdev->refcount is -2147475448. That is the evidence the mr pool is used up. so rds_ib_alloc_fmr is very likely to return ERR_PTR(-EAGAIN). 115 void rds_ib_dev_put(struct rds_ib_device *rds_ibdev) 116 { 117 BUG_ON(atomic_read(&rds_ibdev->refcount) <= 0); 118 if (atomic_dec_and_test(&rds_ibdev->refcount)) 119 queue_work(rds_wq, &rds_ibdev->free_work); 120 } fix is to drop refcount when rds_ib_alloc_fmr failed. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14RDMA/nes: Fix for incorrect recording of the MAC addressTatyana Nikolova1-1/+1
Fix for incorrect recording of the MAC address Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14RDMA/nes: Fix for resolving the neighTatyana Nikolova1-2/+3
Neighbor resolution doesn't work without this fix Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14RDMA/core: Fixes for port mapper client registrationTatyana Nikolova3-25/+48
Fixes to allow clients to make remove mapping requests, after they have provided the user space service with the mapping information, they are using when the service is restarted. 1) Adding IWPM_REG_VALID, IWPM_REG_INCOMPL and IWPM_REG_UNDEF registration types for the port mapper clients and functions to set/check the registration type. 2) If the port mapper user space service is not available to register the client, then its registration stays IWPM_REG_UNDEF and the registration isn't checked until the service becomes available (no mappings are possible, if the user space service isn't running). 3) After the service is restarted, the user space port mapper pid is set to valid and the client registration is set to IWPM_REG_INCOMPL to allow the client to make remove mapping requests. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/IPoIB: Fix bad error flow in ipoib_add_port()Amir Vadai1-2/+4
Error values of ib_query_port() and ib_query_device() weren't propagated correctly. Because of that, ipoib_add_port() could return NULL value, which escaped the IS_ERR() check in ipoib_add_one() and we crashed. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mlx4: Do not attemp to report HCA clock offset on VFsMatan Barak1-5/+6
mlx4 VFs can provide CQE raw time-stamping services, but they don't have the hca core clock mapped to their PCI bars. As such, we should not attempt to query and report the clock offset to user space for VFs. Doing so causes query_device over VFs to fail with -ENOSUPP. Fixes: 4b664c4355b2 ('IB/mlx4: Add support for CQ time-stamping') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/cm: Do not queue work to a device that's going awayErez Shitrit1-6/+55
Whenever ib_cm gets remove_one call, like when there is a hot-unplug event, the driver should mark itself as going_down and confirm that no new works are going to be queued for that device. so, the order of the actions are: 1. mark the going_down bit. 2. flush the wq. 3. [make sure no new works for that device.] 4. unregister mad agent. otherwise, works that are already queued can be scheduled after the mad agent was freed. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/srp: Avoid using uninitialized variableSagi Grimberg3-8/+7
We might return res which is not initialized. Also reduce code duplication by exporting srp_parse_tmo so srp_tmo_set can reuse it. Detected by Coverity. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jenny Falkovich <jennyf@mellanox.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/srpt: Convert use of __constant_cpu_to_beXX to cpu_to_beXXVaishali Thakkar1-36/+35
In little endian cases, the macro cpu_to_be{16,32,64} unfolds to __swab{16,32,64} which provides special case for constants. In big endian cases, __constant_cpu_to_be{16,32,64} and cpu_to_be{16,32,64} expand directly to the same expression. So, replace __constant_cpu_to_be{16,32,64} with cpu_to_be{16,32,64} with the goal of getting rid of the definitions of __constant_cpu_to_be{16,32,64} completely. The Coccinelle semantic patch that performs this transformation is as follows: @@expression x;@@ ( - __constant_cpu_to_be16(x) + cpu_to_be16(x) | - __constant_cpu_to_be32(x) + cpu_to_be32(x) | - __constant_cpu_to_be64(x) + cpu_to_be64(x) ) Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mad: Remove improper use of BUG_ONIra Weiny7-14/+21
We recently added BUG_ON's which were inappropriate for a condition which should never happen. Change these to be WARN_ON_ONCE as a debugging aid. Fixes: 4cd7c9479aff ('IB/mad: Add support for additional MAD info to/from drivers') Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB/mad: Fix compare between big endian and cpu endianIra Weiny1-1/+1
The define OPA_LID_PERMISSIVE is big endian and was compared to the cpu endian variable opa_drslid. Problem caught by 0-day build infrastructure. Fixes: 8e4349d13f33 (IB/mad: Add final OPA MAD processing) Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: John, Jubin <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-14IB: Add rdma_cap_ib_switch helper and use where appropriateHal Rosenstock11-90/+66
Persuant to Liran's comments on node_type on linux-rdma mailing list: In an effort to reform the RDMA core and ULPs to minimize use of node_type in struct ib_device, an additional bit is added to struct ib_device for is_switch (IB switch). This is needed to be initialized by any IB switch device driver. This is a NEW requirement on such device drivers which are all "out of tree". In addition, an ib_switch helper was added to ib_verbs.h based on the is_switch device bit rather than node_type (although those should be consistent). The RDMA core (MAD, SMI, agent, sa_query, multicast, sysfs) as well as (IPoIB and SRP) ULPs are updated where appropriate to use this new helper. In some cases, the helper is now used under the covers of using rdma_[start end]_port rather than the open coding previously used. Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-12Linux 4.2-rc2Linus Torvalds1-1/+1
2015-07-12Revert "drm/i915: Use crtc_state->active in primary check_plane func"Linus Torvalds1-1/+1
This reverts commit dec4f799d0a4c9edae20512fa60b0a36f3299ca2. Jörg Otte reports a NULL pointder dereference due to this commit, as 'crtc_state' very much can be NULL: crtc_state = state->base.state ? intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL; So the change to test 'crtc_state->base.active' cannot possibly be correct as-is. There may be some other minimal fix (like just checking crtc_state for NULL), but I'm just reverting it now for the rc2 release, and people like Daniel Vetter who actually know this code will figure out what the right solution is in the longer term. Reported-and-bisected-by: Jörg Otte <jrg.otte@gmail.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-12freeing unlinked file indefinitely delayedAl Viro1-2/+5
Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Cc: stable@vger.kernel.org # v2.6.38+; earlier ones need s/kill_it/unhash_it/ Acked-by: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-12fix a braino in ovl_d_select_inode()Al Viro1-0/+3
when opening a directory we want the overlayfs inode, not one from the topmost layer. Reported-By: Andrey Jr. Melnikov <temnota.am@gmail.com> Tested-By: Andrey Jr. Melnikov <temnota.am@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-129p: don't leave a half-initialized inode sitting aroundAl Viro2-4/+2
Cc: stable@vger.kernel.org # all branches Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-11tick/broadcast: Prevent NULL pointer dereferenceThomas Gleixner1-8/+10
Dan reported that the recent changes to the broadcast code introduced a potential NULL dereference. Add the proper check. Fixes: e0454311903d "tick/broadcast: Sanity check the shutdown of the local clock_event" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-10selinux: fix mprotect PROT_EXEC regression caused by mm changeStephen Smalley1-1/+2
commit 66fc13039422ba7df2d01a8ee0873e4ef965b50b ("mm: shmem_zero_setup skip security check and lockdep conflict with XFS") caused a regression for SELinux by disabling any SELinux checking of mprotect PROT_EXEC on shared anonymous mappings. However, even before that regression, the checking on such mprotect PROT_EXEC calls was inconsistent with the checking on a mmap PROT_EXEC call for a shared anonymous mapping. On a mmap, the security hook is passed a NULL file and knows it is dealing with an anonymous mapping and therefore applies an execmem check and no file checks. On a mprotect, the security hook is passed a vma with a non-NULL vm_file (as this was set from the internally-created shmem file during mmap) and therefore applies the file-based execute check and no execmem check. Since the aforementioned commit now marks the shmem zero inode with the S_PRIVATE flag, the file checks are disabled and we have no checking at all on mprotect PROT_EXEC. Add a test to the mprotect hook logic for such private inodes, and apply an execmem check in that case. This makes the mmap and mprotect checking consistent for shared anonymous mappings, as well as for /dev/zero and ashmem. Cc: <stable@vger.kernel.org> # 4.1.x Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-07-10parisc: Fix some PTE/TLB race conditions and optimize __flush_tlb_range based on timing resultsJohn David Anglin5-168/+212
The increased use of pdtlb/pitlb instructions seemed to increase the frequency of random segmentation faults building packages. Further, we had a number of cases where TLB inserts would repeatedly fail and all forward progress would stop. The Haskell ghc package caused a lot of trouble in this area. The final indication of a race in pte handling was this syslog entry on sibaris (C8000): swap_free: Unused swap offset entry 00000004 BUG: Bad page map in process mysqld pte:00000100 pmd:019bbec5 addr:00000000ec464000 vm_flags:00100073 anon_vma:0000000221023828 mapping: (null) index:ec464 CPU: 1 PID: 9176 Comm: mysqld Not tainted 4.0.0-2-parisc64-smp #1 Debian 4.0.5-1 Backtrace: [<0000000040173eb0>] show_stack+0x20/0x38 [<0000000040444424>] dump_stack+0x9c/0x110 [<00000000402a0d38>] print_bad_pte+0x1a8/0x278 [<00000000402a28b8>] unmap_single_vma+0x3d8/0x770 [<00000000402a4090>] zap_page_range+0xf0/0x198 [<00000000402ba2a4>] SyS_madvise+0x404/0x8c0 Note that the pte value is 0 except for the accessed bit 0x100. This bit shouldn't be set without the present bit. It should be noted that the madvise system call is probably a trigger for many of the random segmentation faults. In looking at the kernel code, I found the following problems: 1) The pte_clear define didn't take TLB lock when clearing a pte. 2) We didn't test pte present bit inside lock in exception support. 3) The pte and tlb locks needed to merged in order to ensure consistency between page table and TLB. This also has the effect of serializing TLB broadcasts on SMP systems. The attached change implements the above and a few other tweaks to try to improve performance. Based on the timing code, TLB purges are very slow (e.g., ~ 209 cycles per page on rp3440). Thus, I think it beneficial to test the split_tlb variable to avoid duplicate purges. Probably, all PA 2.0 machines have combined TLBs. I dropped using __flush_tlb_range in flush_tlb_mm as I realized all applications and most threads have a stack size that is too large to make this useful. I added some comments to this effect. Since implementing 1 through 3, I haven't had any random segmentation faults on mx3210 (rp3440) in about one week of building code and running as a Debian buildd. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Helge Deller <deller@gmx.de>
2015-07-10stifb: Implement hardware accelerated copyareaAlex Ivanov1-2/+38
This patch adds hardware assisted scrolling. The code is based upon the following investigation: https://parisc.wiki.kernel.org/index.php/NGLE#Blitter A simple 'time ls -la /usr/bin' test shows 1.6x speed increase over soft copy and 2.3x increase over FBINFO_READS_FAST (prefer soft copy over screen redraw) on Artist framebuffer. Signed-off-by: Alex Ivanov <lausgans@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2015-07-10nfit: add support for NVDIMM "latch" flagRoss Zwisler2-1/+37
Add support in the NFIT BLK I/O path for the "latch" flag defined in the "Get Block NVDIMM Flags" _DSM function: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf This flag requires the driver to read back the command register after it is written in the block I/O path. This ensures that the hardware has fully processed the new command and moved the aperture appropriately. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-07-10nfit: update block I/O path to use PMEM APIRoss Zwisler2-12/+100
Update the nfit block I/O path to use the new PMEM API and to adhere to the read/write flows outlined in the "NVDIMM Block Window Driver Writer's Guide": http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf This includes adding support for targeted NVDIMM flushes called "flush hints" in the ACPI 6.0 specification: http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf For performance and media durability the mapping for a BLK aperture is moved to a write-combining mapping which is consistent with memcpy_to_pmem() and wmb_blk(). Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-07-10tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_testDan Williams3-2/+71
In preparation for fixing the BLK path to properly use "directed pcommit" enable the unit test infrastructure to emit mock "flush" tables. Writes to these flush addresses trigger a memory controller to flush its internal buffers to persistent media, similar to the x86 "pcommit" instruction. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-07-10tools/testing/nvdimm: fix return code for unimplemented commandsDan Williams1-1/+1
The implementation for the new "DIMM Flags" DSM relies on the -ENOTTY return code to indicate that the flags are unimplimented and to fall back to a safe default. As is the -ENXIO error code erroneoously indicates to fail enabling a BLK region. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-07-10tools/testing/nvdimm: mock ioremap_wtDan Williams2-0/+7
In the 4.2-rc1 merge the default_memremap_pmem() implementation switched from ioremap_nocache() to ioremap_wt(). Add it to the list of mocked routines to restore the ability to run the unit tests. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-07-10pmem: add maintainer for include/linux/pmem.hRoss Zwisler1-0/+1
The file include/linux/pmem.h was recently created to hold the PMEM API, and is logically part of the PMEM driver. Add an entry for this file to MAINTAINERS. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-07-10Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors"Dmitry Torokhov1-1/+1
This reverts commit 63c4fda3c0bb841b1aad1298fc7fe94058fc79f8 as it causes issues with detecting 3-finger taps. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100481 Cc: stable@vger.kernel.org Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2015-07-10arm64: entry32: remove pointless register assignmentMark Rutland1-2/+0
We currently set x27 in compat_sys_sigreturn_wrapper and compat_sys_rt_sigreturn_wrapper, similarly to what we do with r8/why on 32-bit ARM, in an attempt to prevent sigreturns from being restarted. However, on arm64 we have always used pt_regs::syscallno for syscall restarting (for both native and compat tasks), and x27 is never inspected again before being overwritten in kernel_exit. This patch removes the pointless register assignments. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-07-10MIPS: O32: Use compat_sys_getsockopt.Ralf Baechle1-1/+1
We were using the native syscall and that results in subtle breakage. This is the same issue as fixed in 077d0e65618f27b2199d622e12ada6d8f3dbd862 (MIPS: N32: Use compat getsockopt syscall) but that commit did fix it only for N32. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=100291
2015-07-10MIPS: c-r4k: Extend way_string arrayPaul Burton1-1/+3
The L2 cache in the I6400 core has 16 ways, so extend the way_string array to take such caches into account. [ralf@linux-mips.org: Other already supported CPUs are free to support more than 8 ways of cache as well.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10640/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-10MIPS: Pistachio: Support CDMM & Fast Debug ChannelJames Hogan2-1/+12
Implement the mips_cdmm_phys_base() platform callback to provide a default Common Device Memory Map (CDMM) physical base address for the Pistachio SoC. This allows the CDMM in each VPE to be configured and probed for devices, such as the Fast Debug Channel (FDC). The physical address chosen is just below the default CPC address, which appears to also be unallocated. The FDC IRQ is also usable on Pistachio, and is routed through the GIC, so implement the get_c0_fdc_int() platform callback using gic_get_c0_fdc_int(), so the FDC driver doesn't have to fall back to polling. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Cc: linux-mips@linux-mips.org Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Patchwork: http://patchwork.linux-mips.org/patch/9749/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-10MIPS: Malta: Make GIC FDC IRQ workaround Malta specificJames Hogan2-17/+13
Wider testing reveals that the Fast Debug Channel (FDC) interrupt is routed through the GIC just fine on Pistachio SoC, even though it contains interAptiv cores. Clearly the FDC interrupt routing problems previously observed on interAptiv and proAptiv cores are specific to the Malta FPGA bitstreams. Move the workaround for interAptiv and proAptiv out of gic_get_c0_fdc_int() in the GIC irqchip driver into Malta's get_c0_fdc_int() platform callback, to allow the Pistachio SoC to use the FDC interrupt. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/9748/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-10MIPS: c-r4k: Fix cache flushing for MT coresMarkos Chandras3-4/+55
MT_SMP is not the only SMP option for MT cores. The MT_SMP option allows more than one VPE per core to appear as a secondary CPU in the system. Because of how CM works, it propagates the address-based cache ops to the secondary cores but not the index-based ones. Because of that, the code does not use IPIs to flush the L1 caches on secondary cores because the CM would have done that already. However, the CM functionality is independent of the type of SMP kernel so even in non-MT kernels, IPIs are not necessary. As a result of which, we change the conditional to depend on the CM presence. Moreover, since VPEs on the same core share the same L1 caches, there is no need to send an IPI on all of them so we calculate a suitable cpumask with only one VPE per core. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10654/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-10cxl: Check if afu is not null in cxl_slbiaDaniel Axtens1-1/+1
The pointer to an AFU in the adapter's list of AFUs can be null if we're in the process of removing AFUs. The afu_list_lock doesn't guard against this. Say we have 2 slices, and we're in the process of removing cxl. - We remove the AFUs in order (see cxl_remove). In cxl_remove_afu for AFU 0, we take the lock, set adapter->afu[0] = NULL, and release the lock. - Then we get an slbia. In cxl_slbia we take the lock, and set afu = adapter->afu[0], which is NULL. - Therefore our attempt to check afu->enabled will blow up. Therefore, check if afu is a null pointer before dereferencing it. Cc: stable@vger.kernel.org Signed-off-by: Daniel Axtens <dja@axtens.net> Acked-by: Michael Neuling <mikey@neuling.org> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-07-09hpfs: hpfs_error: Remove static buffer, use vsprintf extension %pV insteadJoe Perches1-4/+7
Removing unnecessary static buffers is good. Use the vsprintf %pV extension instead. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mikulas Patocka <mikulas@twibright.com> Cc: stable@vger.kernel.org # v2.6.36+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-09hpfs: kstrdup() out of memory handlingSanidhya Kashyap1-2/+5
There is a possibility of nothing being allocated to the new_opts in case of memory pressure, therefore return ENOMEM for such case. Signed-off-by: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Signed-off-by: Mikulas Patocka <mikulas@twibright.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-09hpfs: Remove unessary castFiro Yang1-1/+1
Avoid a pointless kmem_cache_alloc() return value cast in fs/hpfs/super.c::hpfs_alloc_inode() Signed-off-by: Firo Yang <firogm@gmail.com> Signed-off-by: Mikulas Patocka <mikulas@twibright.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-09hpfs: add fstrim supportMikulas Patocka5-0/+128
This patch adds support for fstrim to the HPFS filesystem. Signed-off-by: Mikulas Patocka <mikulas@twibright.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.