aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/ulp (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-07-09RDMA/ipoib: Fix use of sizeof()Kamal Heib7-23/+23
Make sure to use sizeof(...) instead of sizeof ... which is more preferred. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-09RDMA/ipoib: Prefer unsigned int to bare use of unsignedKamal Heib4-14/+16
This commit replaces all the unsigned definitions in favour of 'unsigned int' which is preferred. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-09RDMA/ipoib: Use min_t() macro instead of min()Kamal Heib1-3/+4
Use min_t() macro to avoid the casting when using min() macro, also fix the type of "length" and "wc->byte_len" to be "unsigned int" and "u32" which is the right type for each one of them. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-03ib_srpt: Fix a use-after-free in __srpt_close_all_ch()Bart Van Assche1-2/+2
BUG: KASAN: use-after-free in srpt_set_enabled+0x1a9/0x1e0 [ib_srpt] Read of size 4 at addr ffff8801269d23f8 by task check/29726 CPU: 4 PID: 29726 Comm: check Not tainted 4.18.0-rc2-dbg+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 srpt_set_enabled+0x1a9/0x1e0 [ib_srpt] srpt_tpg_enable_store+0xb8/0x120 [ib_srpt] configfs_write_file+0x14e/0x1d0 [configfs] __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f235cfe6154 Fixes: aaf45bd83eba ("IB/srpt: Detect session shutdown reliably") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-03ib_srpt: Fix a use-after-free in srpt_close_ch()Bart Van Assche1-2/+1
Avoid that KASAN reports the following: BUG: KASAN: use-after-free in srpt_close_ch+0x4f/0x1b0 [ib_srpt] Read of size 4 at addr ffff880151180cb8 by task check/4681 CPU: 15 PID: 4681 Comm: check Not tainted 4.18.0-rc2-dbg+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 srpt_close_ch+0x4f/0x1b0 [ib_srpt] srpt_set_enabled+0xf7/0x1e0 [ib_srpt] srpt_tpg_enable_store+0xb8/0x120 [ib_srpt] configfs_write_file+0x14e/0x1d0 [configfs] __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: aaf45bd83eba ("IB/srpt: Detect session shutdown reliably") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-03IB/srp: Remove driver version and release data informationBart Van Assche1-3/+0
Remove the driver version and release date information because such information is not relevant for an upstream driver. See also commit e1267b01240a ("RDMA: Remove useless MODULE_VERSION"). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-29IB/srpt: Support HCAs with more than two portsBart Van Assche2-5/+4
Since there are adapters that have four ports, increase the size of the srpt_device.port[] array. This patch avoids that the following warning is hit with quad port Chelsio adapters: WARN_ON(sdev->device->phys_port_cnt > ARRAY_SIZE(sdev->port)); Reported-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-29IB/iser: set can_queue earlier to allow setting higher queue depthSagi Grimberg1-9/+3
We need to set can_queue earlier than when enabling the scsi host. in a blk-mq enabled environment, the tagset allocation is taken from can_queue which cannot be modified later. Also, pass an updated .can_queue to iscsi_session_setup to have enough iscsi tasks allocated in the session kfifo. Reported-by: Karandeep Chahal <karandeepchahal@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-25IB/cm: Replace members of sa_path_rec with 'struct sgid_attr *'Parav Pandit1-1/+1
While processing a path record entry in CM messages the associated GID attribute is now also supplied. Currently for RoCE a netdevice's net namespace pointer and ifindex are stored in path record entry. Both of these fields of the netdev can change anytime while processing CM messages. Additionally storing net namespace without holding reference will lead to use-after-free crash. Therefore it is removed. Netdevice information for RoCE is instead provided via referenced gid attribute in ib_cm requests. Such a design leads to a situation where the kernel can crash when the net pointer becomes invalid. However today it is always initialized to init_net, which cannot become invalid. In order to support processing packets in any arbitrary namespace of the received packet, it is necessary to avoid such conditions. This patch removes the dependency on the net pointer and ifindex; instead it will rely on SGID attribute which contains a pointer to netdev. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-25IB: Make init_ah_attr_grh_fields set sgid_attrParav Pandit1-1/+3
Use the sgid and other information from the path record to figure out the sgid_attrs. Store the selected table entry in the sgid_attr for everything else to use. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-18IB/core: add max_send_sge and max_recv_sge attributesSteve Wise4-7/+10
This patch replaces the ib_device_attr.max_sge with max_send_sge and max_recv_sge. It allows ulps to take advantage of devices that have very different send and recv sge depths. For example cxgb4 has a max_recv_sge of 4, yet a max_send_sge of 16. Splitting out these attributes allows much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW API. Consider a large RDMA WRITE that has 16 scattergather entries. With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of 16, it can be done with 1 WRITE WR. Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB: Replace ib_query_gid/ib_get_cached_gid with rdma_query_gidParav Pandit4-6/+6
If the gid_attr argument is NULL then the functions behave identically to rdma_query_gid. ib_query_gid just calls ib_get_cached_gid, so everything can be consolidated to one function. Now that all callers either use rdma_query_gid() or ib_get_cached_gid(), ib_query_gid() API is removed. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook2-4/+7
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook2-5/+7
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook3-7/+9
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds9-86/+106
Pull rdma updates from Jason Gunthorpe: "This has been a quiet cycle for RDMA, the big bulk is the usual smallish driver updates and bug fixes. About four new uAPI related things. Not as much Szykaller patches this time, the bugs it finds are getting harder to fix. Summary: - More work cleaning up the RDMA CM code - Usual driver bug fixes and cleanups for qedr, qib, hfi1, hns, i40iw, iw_cxgb4, mlx5, rxe - Driver specific resource tracking and reporting via netlink - Continued work for name space support from Parav - MPLS support for the verbs flow steering uAPI - A few tricky IPoIB fixes improving robustness - HFI1 driver support for the '16B' management packet format - Some auditing to not print kernel pointers via %llx or similar - Mark the entire 'UCM' user-space interface as BROKEN with the intent to remove it entirely. The user space side of this was long ago replaced with RDMA-CM and syzkaller is finding bugs in the residual UCM interface nobody wishes to fix because nobody uses it. - Purge more bogus BUG_ON's from Leon - 'flow counters' verbs uAPI - T10 fixups for iser/isert, these are Acked by Martin but going through the RDMA tree due to dependencies" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (138 commits) RDMA/mlx5: Update SPDX tags to show proper license RDMA/restrack: Change SPDX tag to properly reflect license IB/hfi1: Fix comment on default hdr entry size IB/hfi1: Rename exp_lock to exp_mutex IB/hfi1: Add bypass register defines and replace blind constants IB/hfi1: Remove unused variable IB/hfi1: Ensure VL index is within bounds IB/hfi1: Fix user context tail allocation for DMA_RTAIL IB/hns: Use zeroing memory allocator instead of allocator/memset infiniband: fix a possible use-after-free bug iw_cxgb4: add INFINIBAND_ADDR_TRANS dependency IB/isert: use T10-PI check mask definitions from core layer IB/iser: use T10-PI check mask definitions from core layer RDMA/core: introduce check masks for T10-PI offload IB/isert: fix T10-pi check mask setting IB/mlx5: Add counters read support IB/mlx5: Add flow counters read support IB/mlx5: Add flow counters binding support IB/mlx5: Add counters create and destroy support IB/uverbs: Add support for flow counters ...
2018-06-04IB/isert: use T10-PI check mask definitions from core layerMax Gurtovoy1-4/+7
No reason to use hard-coded protection information checks in ib_isert driver. Use check masks from RDMA core driver. Also, while we here, reduce the number of instructions made for setting the check mask (no need to do bitwise or with 0 since we zero the mask in the beginning of the function). Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-04IB/iser: use T10-PI check mask definitions from core layerMax Gurtovoy2-6/+2
No reason to re-define protection information check in ib_iser driver. Use check masks from RDMA core driver. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-04IB/isert: fix T10-pi check mask settingMax Gurtovoy1-1/+1
A copy/paste bug (probably) caused setting of an app_tag check mask in case where a ref_tag check was needed. Fixes: 38a2d0d429f1 ("IB/isert: convert to the generic RDMA READ/WRITE API") Fixes: 9e961ae73c2c ("IB/isert: Support T10-PI protected transactions") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31IB/iser: Do not reduce max_sectorsSergey Gorenko4-11/+26
The iSER driver reduces max_sectors. For example, if you load the ib_iser module with max_sectors=1024, you will see that /sys/class/block/<bdev>/queue/max_hw_sectors_kb is 508. It is an incorrect value. The expected value is (max_sectors * sector_size) / 1024 = 512. Reducing of max_sectors can cause performance degradation due to unnecessary splitting of IO requests. The number of pages per MR has been fixed here, so there is no longer any need to reduce max_sectors. Fixes: 9c674815d346 ("IB/iser: Fix max_sectors calculation") Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com> Reviewed-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-31Merge branch 'wip/dl-ipoib' into wip/dl-for-nextDoug Ledford1-41/+21
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-28Merge branch 'mr_fix' into git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma for-nextJason Gunthorpe1-1/+1
Update mlx4 to support user MR creation against read-only memory, previously it required the memory to be writable. Based on rdma for-rc due to dependencies. * mr_fix: (2 commits) IB/mlx4: Mark user MR as writable if actual virtual memory is writable IB/core: Make testing MR flags for writability a static inline function
2018-05-28IB: Revert "remove redundant INFINIBAND kconfig dependencies"Arnd Bergmann1-1/+1
Several subsystems depend on INFINIBAND_ADDR_TRANS, which in turn depends on INFINIBAND. However, when with CONFIG_INIFIBAND=m, this leads to a link error when another driver using it is built-in. The INFINIBAND_ADDR_TRANS dependency is insufficient here as this is a 'bool' symbol that does not force anything to be a module in turn. fs/cifs/smbdirect.o: In function `smbd_disconnect_rdma_work': smbdirect.c:(.text+0x1e4): undefined reference to `rdma_disconnect' net/9p/trans_rdma.o: In function `rdma_request': trans_rdma.c:(.text+0x7bc): undefined reference to `rdma_disconnect' net/9p/trans_rdma.o: In function `rdma_destroy_trans': trans_rdma.c:(.text+0x830): undefined reference to `ib_destroy_qp' trans_rdma.c:(.text+0x858): undefined reference to `ib_dealloc_pd' Fixes: 9533b292a7ac ("IB: remove redundant INFINIBAND kconfig dependencies") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Thelen <gthelen@google.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Lots of easy overlapping changes in the confict resolutions here. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24IB/isert: Fix for lib/dma_debug check_sync warningAlex Estrin1-9/+17
The following error message occurs on a target host in a debug build during session login: [ 3524.411874] WARNING: CPU: 5 PID: 12063 at lib/dma-debug.c:1207 check_sync+0x4ec/0x5b0 [ 3524.421057] infiniband hfi1_0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000000000000] [size=76 bytes] ......snip ..... [ 3524.535846] CPU: 5 PID: 12063 Comm: iscsi_np Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1 [ 3524.546764] Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.2.6 06/08/2015 [ 3524.555740] Call Trace: [ 3524.559102] [<ffffffffa5fe915b>] dump_stack+0x19/0x1b [ 3524.565477] [<ffffffffa58a2f58>] __warn+0xd8/0x100 [ 3524.571557] [<ffffffffa58a2fdf>] warn_slowpath_fmt+0x5f/0x80 [ 3524.578610] [<ffffffffa5bf5b8c>] check_sync+0x4ec/0x5b0 [ 3524.585177] [<ffffffffa58efc3f>] ? set_cpus_allowed_ptr+0x5f/0x1c0 [ 3524.592812] [<ffffffffa5bf5cd0>] debug_dma_sync_single_for_cpu+0x80/0x90 [ 3524.601029] [<ffffffffa586add3>] ? x2apic_send_IPI_mask+0x13/0x20 [ 3524.608574] [<ffffffffa585ee1b>] ? native_smp_send_reschedule+0x5b/0x80 [ 3524.616699] [<ffffffffa58e9b76>] ? resched_curr+0xf6/0x140 [ 3524.623567] [<ffffffffc0879af0>] isert_create_send_desc.isra.26+0xe0/0x110 [ib_isert] [ 3524.633060] [<ffffffffc087af95>] isert_put_login_tx+0x55/0x8b0 [ib_isert] [ 3524.641383] [<ffffffffa58ef114>] ? try_to_wake_up+0x1a4/0x430 [ 3524.648561] [<ffffffffc098cfed>] iscsi_target_do_tx_login_io+0xdd/0x230 [iscsi_target_mod] [ 3524.658557] [<ffffffffc098d827>] iscsi_target_do_login+0x1a7/0x600 [iscsi_target_mod] [ 3524.668084] [<ffffffffa59f9bc9>] ? kstrdup+0x49/0x60 [ 3524.674420] [<ffffffffc098e976>] iscsi_target_start_negotiation+0x56/0xc0 [iscsi_target_mod] [ 3524.684656] [<ffffffffc098c2ee>] __iscsi_target_login_thread+0x90e/0x1070 [iscsi_target_mod] [ 3524.694901] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.705446] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.715976] [<ffffffffc098ca78>] iscsi_target_login_thread+0x28/0x60 [iscsi_target_mod] [ 3524.725739] [<ffffffffa58d60ff>] kthread+0xef/0x100 [ 3524.732007] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.739540] [<ffffffffa5fff1b7>] ret_from_fork_nospec_begin+0x21/0x21 [ 3524.747558] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.755088] ---[ end trace 23f8bf9238bd1ed8 ]--- [ 3595.510822] iSCSI/iqn.1994-05.com.redhat:537fa56299: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION. The code calls dma_sync on login_tx_desc->dma_addr prior to initializing it with dma-mapped address. login_tx_desc is a part of iser_conn structure and is used only once during login negotiation, so the issue is fixed by eliminating dma_sync call for this buffer using a special case routine. Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-22RDMA/ipoib: drop skb on path record lookup failureEvgenii Smirnov1-41/+21
In unicast_arp_send function there is an inconsistency in error handling of path_rec_start call. If path_rec_start is called because of an absent ah field, skb will be dropped. But if it is called on a creation of a new path, or if the path is invalid, skb will be added to the tail of path queue. In case of a new path it will be dropped on path_free, but in case of invalid path it can stay in the queue forever. This patch unifies the behavior, dropping skb in all cases of path_rec_start failure. Signed-off-by: Evgenii Smirnov <evgenii.smirnov@profitbricks.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-22RDMA/ipoib: Update paths on CLIENT_REREG/SM_CHANGE eventsDoug Ledford2-7/+28
We do a light flush on CLIENT_REREG and SM_CHANGE events. This goes through and marks paths invalid. But we weren't always checking for this validity when we needed to, and so we could keep using a path marked invalid. What's more, once we establish a path with a valid ah, we put a pointer to the ah in the neigh struct directly, so even if we mark the path as invalid, as long as the neigh has a direct pointer to the ah, it keeps using the old, outdated ah. To fix this we do several things. 1) Put the valid flag in the ah instead of the path struct, so when we put the ah pointer directly in the neigh struct, we can easily check the validity of the ah on send events. 2) Check the neigh->ah and neigh->ah->valid elements in the needed places, and if we have an ah, but it's invalid, then invoke a refresh of the ah. 3) Fix the various places that check for path, but didn't check for path->valid (now path->ah && path->ah->valid). Reported-by: Evgenii Smirnov <evgenii.smirnov@profitbricks.com> Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events") Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-16IB/ipoib: replace local_irq_disable() with proper lockingSebastian Andrzej Siewior1-9/+6
In ipoib_mcast_restart_task() the netif_addr_lock() is invoked prior local_irq_save(). netif_addr_lock() should not be invoked in interrupt disabled section, only in BH disabled sections. The priv->lock is always acquired with disabled interrupts. The only place where netif_addr_lock() and priv->lock nest ist ipoib_mcast_restart_task(). Drop the local_irq_save() and acquire priv->lock with spin_lock_irq() inside the netif_addr locked section. It's safe to do so because the caller is either a worker function or __ipoib_ib_dev_flush() which are both calling with interrupts enabled (and since BH is enabled here, too so netif_addr_lock_bh() needs to be used). Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-3/+3
The bpf syscall and selftests conflicts were trivial overlapping changes. The r8169 change involved moving the added mdelay from 'net' into a different function. A TLS close bug fix overlapped with the splitting of the TLS state into separate TX and RX parts. I just expanded the tests in the bug fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf == X". Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-09IB: remove redundant INFINIBAND kconfig dependenciesGreg Thelen1-1/+1
INFINIBAND_ADDR_TRANS depends on INFINIBAND. So there's no need for options which depend INFINIBAND_ADDR_TRANS to also depend on INFINIBAND. Remove the unnecessary INFINIBAND depends. Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-29opa_vnic: Just use skb_get_hash instead of skb_tx_hashAlexander Duyck3-13/+12
This patch is meant to clean up how the opa_vnic is obtaining entropy from Tx packets. The code as it was written was claiming to get 16 bits of hash, but from what I can tell it was only ever actually getting 14 bits as it was limited to 0 - (2^15 - 1). It then was folding the result to get a 8 bit value for entropy. Instead of throwing away all that input I am cutting out the middle man and instead having the code call skb_get_hash directly and then folding the 32 bit value into a 8 bit value using a pair of shifts and XOR operations. Execution wise this new approach should provide more entropy and be faster since we are bypassing the reciprocal multiplication to reduce the 32b value to 16b and instead just using a shift/XOR combination. In addition we can drop the unneeded adapter value from the call to get the entropy since the netdev itself isn't even needed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27IB/ipoib: fix ipoib_start_xmit()'s return typeLuc Van Oostenryck1-1/+1
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27ib_srp: depend on INFINIBAND_ADDR_TRANSGreg Thelen1-1/+1
INFINIBAND_SRP code depends on INFINIBAND_ADDR_TRANS provided symbols. So declare the kconfig dependency. This is necessary to allow for enabling INFINIBAND without INFINIBAND_ADDR_TRANS. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27ib_srpt: depend on INFINIBAND_ADDR_TRANSGreg Thelen1-1/+1
INFINIBAND_SRPT code depends on INFINIBAND_ADDR_TRANS provided symbols. So declare the kconfig dependency. This is necessary to allow for enabling INFINIBAND without INFINIBAND_ADDR_TRANS. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-03IB/ipoib: Delete unused structYuval Shaia1-5/+0
This structure is not needed since the introduction of commit 'c42687784b9a ("IB/ipoib: Scatter-Gather support in connected mode")' Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-19IB/srp: Disallow duplicate RDMA/CM connectionsBart Van Assche1-3/+0
According to the SRP standard the INITIATOR and TARGET PORT IDENTIFIER fields from the login request specify the I_T nexus. Whether or not an SRP target closes an existing connection for an I_T nexus when a login request is received depends on the value of the MULTICHANNEL field in the login request. The SRP initiator derives the value of the INITIATOR and TARGET PORT IDENTIFIER fields from the .id_ext, .ioc_guid, .initiator_ext .sgid members of the srp_target_port structure. This means that the .rdma_cm.dst check must be removed from srp_conn_unique(). This patch avoids that for target ports that have multiple addresses, e.g. an IPv4 and an IPv6 address, and if a connection is established to both target port addresses, that the initiator logs in alternatingly every 10 seconds to the other target port address. An SRP target must namely terminate all but one connections for a given I_T nexus if the MULTICHANNEL field has not been set in the login request. Fixes: 19f313438c77 ("IB/srp: Add RDMA/CM support") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15IB/{core, ipoib}: Simplify ib_find_gid() for unused ndevParav Pandit1-1/+1
ib_find_gid() is only used by IPoIB driver. For IB link layer, GID table entries are not based on netdevice. Netdevice parameter is unused here. Therefore, it is removed. Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-14drivers/infiniband/ulp/srpt/ib_srpt.c: fix build with gcc-4.4.4Andrew Morton1-1/+2
gcc-4.4.4 has issues with initialization of anonymous unions: drivers/infiniband/ulp/srpt/ib_srpt.c: In function 'srpt_zerolength_write': drivers/infiniband/ulp/srpt/ib_srpt.c:854: error: unknown field 'wr_cqe' specified in initializer drivers/infiniband/ulp/srpt/ib_srpt.c:854: warning: initialization makes integer from pointer without a cast Work aound this. Fixes: 2a78cb4db487 ("IB/srpt: Fix an out-of-bounds stack access in srpt_zerolength_write()") Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14IB/srp: Fix IPv6 address parsingBart Van Assche1-4/+23
Split IPv6 addresses at the colon that separates the IPv6 address and the port number instead of at a colon in the middle of the IPv6 address. Check whether the IPv6 address is surrounded with square brackets. Fixes: 19f313438c77 ("IB/srp: Add RDMA/CM support") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-07IB/srpt: Add RDMA/CM supportBart Van Assche2-63/+325
Add a parameter for configuring the port on which the ib_srpt driver listens for incoming RDMA/CM connections, namely /sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port. The default value for this parameter is 0 which means "do not listen for incoming RDMA/CM connections". Add RDMA/CM support to all code that handles connection state changes. Modify srpt_init_nodeacl() such that ACLs can be configured for IPv4 and IPv6 addresses. Note: incoming connection requests are only accepted for ports that have been enabled. See also the "if (!sport->enabled)" code in the connection request handler. See also the following configfs attribute: /sys/kernel/config/target/srpt/$port/$port/enable. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-06IB/srp: Use the IB_DEVICE_SG_GAPS_REG HCA feature if supportedSergey Gorenko1-20/+36
If a HCA supports the SG_GAPS_REG feature then fewer memory regions are required per command. This patch reduces the number of memory regions that is allocated per SRP session. Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Acked-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06IB/srpt: Fix an out-of-bounds stack access in srpt_zerolength_write()Bart Van Assche1-6/+9
Avoid triggering an out-of-bounds stack access by changing the type of 'wr' from ib_send_wr into ib_rdma_wr. This patch fixes the following KASAN bug report: BUG: KASAN: stack-out-of-bounds in rxe_post_send+0x7a9/0x9a0 [rdma_rxe] Read of size 8 at addr ffff880068197a48 by task kworker/2:1/44 Workqueue: ib_cm cm_work_handler [ib_cm] Call Trace: dump_stack+0x8e/0xcd print_address_description+0x6f/0x280 kasan_report+0x25a/0x380 __asan_load8+0x54/0x90 rxe_post_send+0x7a9/0x9a0 [rdma_rxe] srpt_zerolength_write+0xf0/0x180 [ib_srpt] srpt_cm_rtu_recv+0x68/0x110 [ib_srpt] srpt_rdma_cm_handler+0xbb/0x15b [ib_srpt] cma_ib_handler+0x1aa/0x4a0 [rdma_cm] cm_process_work+0x30/0x100 [ib_cm] cm_work_handler+0xa86/0x351b [ib_cm] process_one_work+0x475/0x9f0 worker_thread+0x69/0x690 kthread+0x1ad/0x1d0 ret_from_fork+0x3a/0x50 Fixes: aaf45bd83eba ("IB/srpt: Detect session shutdown reliably") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28IB/srp: Use %pIS instead of inet_ntop()Bart Van Assche1-42/+10
Except for a minor log message change, this patch does not change any functionality. For the introduction of %pIS, see also commit 1067964305df ("lib: vsprintf: add IPv4/v6 generic %p[Ii]S[pfs] format specifier"). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28Revert "IB/srp: Avoid that a cable pull can trigger a kernel crash"Bart Van Assche1-19/+6
The caller of srp_ib_lookup_path() is responsible for holding a reference on the SCSI host. That means that commit 8a0d18c62121 was not necessary. Hence revert it. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-28IB/srp: Fix srp_abort()Bart Van Assche1-3/+5
Before commit e494f6a72839 ("[SCSI] improved eh timeout handler") it did not really matter whether or not abort handlers like srp_abort() called .scsi_done() when returning another value than SUCCESS. Since that commit however this matters. Hence only call .scsi_done() when returning SUCCESS. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: stable@vger.kernel.org Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-22Merge branch 'k.o/for-rc' into k.o/wip/dl-for-nextDoug Ledford1-2/+0
There is a 14 patch series waiting to come into for-next that has a dependecy on code submitted into this kernel's for-rc series. So, merge the for-rc branch into the current for-next in order to make the patch series apply cleanly. Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-15IB/srp: Fix completion vector assignment algorithmBart Van Assche1-6/+4
Ensure that cv_end is equal to ibdev->num_comp_vectors for the NUMA node with the highest index. This patch improves spreading of RDMA channels over completion vectors and thereby improves performance, especially on systems with only a single NUMA node. This patch drops support for the comp_vector login parameter by ignoring the value of that parameter since I have not found a good way to combine support for that parameter and automatic spreading of RDMA channels over completion vectors. Fixes: d92c0da71a35 ("IB/srp: Add multichannel support") Reported-by: Alexander Schmid <alex@modula-shop-systems.de> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Alexander Schmid <alex@modula-shop-systems.de> Cc: stable@vger.kernel.org Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-15IB/ipoib: Do not warn if IPoIB debugfs doesn't existAlaa Hleihel1-2/+0
netdev_wait_allrefs() could rebroadcast NETDEV_UNREGISTER event multiple times until all refs are gone, which will result in calling ipoib_delete_debug_files multiple times and printing a warning. Remove the WARN_ONCE since checks of NULL pointers before calling debugfs_remove are not needed. Fixes: 771a52584096 ("IB/IPoIB: ibX: failed to create mcg debug file") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-1/+1
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.