aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-05-20IB/cma: Fix broken AF_IB UD supportMatthew Finlay1-11/+21
Support for using UD and AF_IB is currently broken. The IB_CM_SIDR_REQ_RECEIVED message is not handled properly in cma_save_net_info() and we end up falling into code that will try and process the request as ipv4/ipv6, which will end up failing. The resolution is to add a check for the SIDR_REQ and call cma_save_ib_info() with a NULL path record. Change cma_save_ib_info() to copy the src sib info from the listen_id when the path record is NULL. Reported-by: Hari Shankar <Hari.Shankar@netapp.com> Signed-off-by: Matt Finlay <matt@mellanox.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-20ib/cm: Change reject message type when destroying cm_idTed Kim1-1/+1
Problem reported by: Ted Kim <ted.h.kim@oracle.com>: We have a case where a Linux system and a non-Linux system are trying to interoperate. The Linux host is the active side and starts the connection establishment, but later decides to not go through with the connection setup and does rdma_destroy_id(). The rdma_destroy_id() eventually works its way down to cm_destroy_id() in core/cm.c, where a REJ is sent. The non-Linux system has some trouble recognizing the REJ because of: A. CM states which can't receive the REJ B. Some issues about REJ formatting (missing comm ID) ISSUE A: That part of the spec says, a Consumer Reject REJ can be sent for a connection abort, but it goes further and says: can send a REJ message with a "Consumer Reject" Reason code if they are in a CM state (i.e. REP Rcvd, MRA(REP) Sent, REQ Rcvd, MRA Sent) that allows a REJ to be sent (lines 35-38). Of the states listed there in that sentence, it would seem to limit the active side to using the Consumer Reject (for the abort case) in just the REP-Rcvd and MRA-REP-Sent states. That is basically only after the active side sees a REP (or alternatively goes down the state transitions to timeout in which case a Timeout REJ is sent). As a fix, in cm-destroy-id() move the IB-CM-MRA-REQ-RCVD case to the same as REQ-SENT. Essentially, make a REJ sent after getting an MRA on active side a timeout rather than Consumer- Reject, which is arguably more correct with the CM state diagrams previous to getting a REP. Signed-off-by: Ted Kim <ted.h.kim@oracle.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2015-05-18RDMA/ocrdma: Update ocrdma version numberSelvin Xavier1-1/+1
Updating the driver version to 10.6.0.0 Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fail connection for MTU lesser than 512Naga Irrinki1-1/+3
HW currently restricts the IB MTU range between 512 and 4096. Fail connection for MTUs lesser than 512. Signed-off-by: Naga Irrinki <naga.irrinki@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fix dmac resolution for link local addressMitesh Ahuja2-1/+5
rdma_addr_find_dmac_by_grh fails to resolve dmac for link local address. Use rdma_get_ll_mac to resolve the link local address. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Prevent allocation of DPP PDs if FW doesnt support itMitesh Ahuja2-28/+27
If DPP PDs are not supported by the FW, allocate only normal PDs. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@avagotech.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fix the request length for RDMA_QUERY_QP mailbox command to FW.Mitesh Ahuja2-1/+3
Fix ocrdma_query_qp to pass correct mailbox request length to FW. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Use VID 0 if PFC is enabled and vlan is not configuredDevesh Sharma2-2/+18
If the adapter ports are in PFC mode and VLAN is not configured, use vlan tag 0 for RoCE traffic. Also, log an advisory message in system logs. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fix QP state transition in destroy_qpDevesh Sharma1-4/+6
Don't move QP to error state, if QP is in reset state during QP destroy operation. Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Report EQ full fatal errorDevesh Sharma2-0/+13
Detect when Event Queue (EQ) becomes full and print a warning message. Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-18RDMA/ocrdma: Fix EQ destroy failure during driver unloadSelvin Xavier1-3/+3
Changing the destroy sequence of mailbox queue and event queues. FW expects mailbox queue to be destroyed before desroying the EQs. Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com> Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-12infiniband: Remove duplicated KERN_<LEVEL> from pr_<level> usesJoe Perches3-5/+4
These KERN_<LEVEL> uses are unnecessary with pr_<level> and cause bad logging output so remove them. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-12IB/qib: fix test of unsigned variableMike Marciniszyn2-2/+3
Commit d4988623cc60 ("IB/qib: use arch_phys_wc_add()") adjusted mtrr inititialization to use the new interface. Unfortunately, the new interface returns a signed value and the patch tested the unsigned wc_cookie. Fix the issue by changing the type of wc_cookie to int. For the success case the ret left at zero to avoid a warning from the caller. For failure wc_cookie is used as the ret. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-12RDMA/core: Fix for parsing netlink string attributeTatyana Nikolova1-1/+1
The string iwpm_ulib_name is recorded in a nlmsg as a netlink attribute. Without this fix parsing of the nlmsg by the userspace port mapper service fails because of unknown attribute length, causing the port mapper service not to register the client, which has sent the nlmsg. Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Cc: <stable@vger.kernel.org> #v3.16 Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-11iw_cxgb4: use wildcard mapping for getting remote addr infoSteve Wise1-8/+8
For listening endpoints bound to the wildcard address, we need to pass the wildcard address mapping to iwpm_get_remote_info() instead of the mapped address of the new child connection. Without this fix, and with iwarp port mapping enabled, each iw_cxgb4 connection that is spawned from a listening endpoint bound to the wildcard address, will generate an annoying dmesg entry about failing to find the remote address mapping info, and the connection state displayed in debugfs under /sys/kernel/debug/iw_cxgb4/<pci-slot-no>/eps will not have the peer's address/port mapping info. The connection still works though. Fixes: 5b6b8fe ("RDMA/cxgb4: Report the actual address of the remote connecting peer") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-11IB/ehca: use correct destination for memcpyNicholas Mc Guire1-2/+2
Using an element of a struct as the address for the memcpy of the whole struct may introduce a buffer overflow and does not help readability either simply pass the real thing as first argument to memcpy. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05IPoIB/CM: Fix indentation levelBart Van Assche1-2/+2
See also patch "IPoIB/cm: Add connected mode support for devices without SRQs" (commit ID 68e995a29572). Detected by smatch. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05iw_cxgb4: Remove negative advice dmesg warningsHariprasad S3-9/+32
Remove these log messages in favor of per-endpoint counters as well as device-global counters that can be inspected via debugfs. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05IB/core: Fix unaligned accessesDavid Ahern2-14/+13
Addresses the following kernel logs seen during boot of sparc systems: Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Kernel unaligned access at TPC[103bce50] cm_find_listen+0x34/0xf8 [ib_cm] Signed-off-by: David Ahern <david.ahern@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05IB/core: change rdma_gid2ip into void function as it always return zeroHonggang LI1-10/+3
Signed-off-by: Honggang Li <honli@redhat.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05IB/qib: use arch_phys_wc_add()Luis R. Rodriguez7-79/+39
This driver already makes use of ioremap_wc() on PIO buffers, so convert it to use arch_phys_wc_add(). The qib driver uses a mmap() special case for when PAT is not used, this behaviour used to be determined with a module parameter but since we have been asked to just remove that module parameter this checks for the WC cookie, if not set we can assume PAT was used. If its set we do what we used to do for the mmap for when MTRR was enabled. The removal of the module parameter is OK given that Andy notes that even if users of module parameter are still around it will not prevent loading of the module on recent kernels. Cc: Doug Ledford <dledford@redhat.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: konrad.wilk@oracle.com Cc: ville.syrjala@linux.intel.com Cc: david.vrabel@citrix.com Cc: jbeulich@suse.com Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: infinipath@intel.com Cc: linux-rdma@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: xen-devel@lists.xensource.com Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05IB/qib: add acounting for MTRRLuis R. Rodriguez1-1/+1
There is no good reason not to, we eventually delete it as well. Cc: Toshi Kani <toshi.kani@hp.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Airlie <airlied@redhat.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mike Marciniszyn <infinipath@intel.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux-rdma@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05IB/core: dma unmap optimizationsGuy Shapiro1-2/+3
While unmapping an ODP writable page, the dirty bit of the page is set. In order to do so, the head of the compound page is found. Currently, the compound head is found even on non-writable pages, where it is never used, leading to unnecessary cpu barrier that impacts performance. This patch moves the search for the compound head to be done only when needed. Signed-off-by: Guy Shapiro <guysh@mellanox.com> Acked-by: Shachar Raindel <raindel@mellanox.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05IB/core: dma map/unmap locking optimizationsGuy Shapiro1-5/+4
Currently, while mapping or unmapping pages for ODP, the umem mutex is locked and unlocked once for each page. Such lock/unlock operation take few tens to hundreds of nsecs. This makes a significant impact when mapping or unmapping few MBs of memory. To avoid this, the mutex should be locked only once per operation, and not per page. Signed-off-by: Guy Shapiro <guysh@mellanox.com> Acked-by: Shachar Raindel <raindel@mellanox.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05RDMA/cxgb4: Report the actual address of the remote connecting peerSteve Wise2-4/+51
Get the actual (non-mapped) ip/tcp address of the connecting peer from the port mapper Also setup the passive side endpoint to correctly display the actual and mapped addresses for the new connection. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05RDMA/nes: Report the actual address of the remote connecting peerTatyana Nikolova2-17/+49
Get the actual (non-mapped) ip/tcp address of the connecting peer from the port mapper and report the address info to the user space application at the time of connection establishment Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05RDMA/core: Enable the iWarp Port Mapper to provide the actual address of the connecting peer to its clientsTatyana Nikolova3-34/+262
Add functionality to enable the port mapper on the passive side to provide to its clients the actual (non-mapped) ip/tcp address information of the connecting peer 1) Adding remote_info_cb() to process the address info of the connecting peer The address info is provided by the user space port mapper service when the connection is initiated by the peer 2) Adding a hash list to store the remote address info 3) Adding functionality to add/remove the remote address info After the info has been provided to the port mapper client, it is removed from the hash list Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05iw_cxgb4: enforce qp/cq id requirementsHariprasad S1-0/+23
Currently the iw_cxgb4 implementation requires the qp and cq qid densities to match as well as the qp and cq id ranges. So fail a device open if the device configuration doesn't meet the requirements. The reason for these restictions has to do with the fact that IQ qid X has a UGTS register in the same bar2 page as EQ qid X. Thus both qids need to be allocated to the same user process for security reasons. The logic that does this (the qpid allocator in iw_cxgb4/resource.c) handles this but requires the above restrictions. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05iw_cxgb4: use BAR2 GTS register for T5 kernel mode CQsHariprasad S2-7/+15
For T5, we must not use the kdb/kgts registers, in order avoid db drops under extreme loads. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05iw_cxgb4: 32b platform fixesHariprasad S5-16/+15
- get_dma_mr() was using ~0UL which is should be ~0ULL. This causes the DMA MR to get setup incorrectly in hardware. - wr_log_show() needed a 64b divide function div64_u64() instead of doing division directly. - fixed warnings about recasting a pointer to a u64 Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05iw_cxgb4: Cleanup register defines/MACROSHariprasad S2-3/+5
Cleanup macros and register defines for consistency Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05RDMA/CMA: Canonize IPv4 on IPV6 sockets properlyJason Gunthorpe1-10/+17
When accepting a new IPv4 connect to an IPv6 socket, the CMA tries to canonize the address family to IPv4, but does not properly process the listening sockaddr to get the listening port, and does not properly set the address family of the canonized sockaddr. Fixes: e51060f08a61 ("IB: IP address based RDMA connection manager") Cc: <stable@vger.kernel.org> Reported-By: Yotam Kenneth <yotamke@mellanox.com> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-26Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-18/+18
Pull fourth vfs update from Al Viro: "d_inode() annotations from David Howells (sat in for-next since before the beginning of merge window) + four assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() VFS: assorted d_backing_inode() annotations VFS: fs/inode.c helpers: d_inode() annotations VFS: fs/cachefiles: d_backing_inode() annotations VFS: fs library helpers: d_inode() annotations VFS: assorted weird filesystems: d_inode() annotations VFS: normal filesystems (and lustre): d_inode() annotations VFS: security/: d_inode() annotations VFS: security/: d_backing_inode() annotations VFS: net/: d_inode() annotations VFS: net/unix: d_backing_inode() annotations VFS: kernel/: d_inode() annotations VFS: audit: d_backing_inode() annotations VFS: Fix up some ->d_inode accesses in the chelsio driver VFS: Cachefiles should perform fs modifications on the top layer only VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-24Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds3-366/+411
Pull SCSI target updates from Nicholas Bellinger: "Lots of activity in target land the last months. The highlights include: - Convert fabric drivers tree-wide to target_register_template() (hch + bart) - iser-target hardening fixes + v1.0 improvements (sagi) - Convert iscsi_thread_set usage to kthread.h + kill iscsi_target_tq.c (sagi + nab) - Add support for T10-PI WRITE_STRIP + READ_INSERT operation (mkp + sagi + nab) - DIF fixes for CONFIG_DEBUG_SG=y + UNMAP file emulation (akinobu + sagi + mkp) - Extended TCMU ABI v2 for future BIDI + DIF support (andy + ilias) - Fix COMPARE_AND_WRITE handling for NO_ALLLOC drivers (hch + nab) Thanks to everyone who contributed this round with new features, bug-reports, fixes, cleanups and improvements. Looking forward, it's currently shaping up to be a busy v4.2 as well" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (69 commits) target: Put TCMU under a new config option target: Version 2 of TCMU ABI target: fix tcm_mod_builder.py target/file: Fix UNMAP with DIF protection support target/file: Fix SG table for prot_buf initialization target/file: Fix BUG() when CONFIG_DEBUG_SG=y and DIF protection enabled target: Make core_tmr_abort_task() skip TMFs target/sbc: Update sbc_dif_generate pr_debug output target/sbc: Make internal DIF emulation honor ->prot_checks target/sbc: Return INVALID_CDB_FIELD if DIF + sess_prot_type disabled target: Ensure sess_prot_type is saved across session restart target/rd: Don't pass incomplete scatterlist entries to sbc_dif_verify_* target: Remove the unused flag SCF_ACK_KREF target: Fix two sparse warnings target: Fix COMPARE_AND_WRITE with SG_TO_MEM_NOALLOC handling target: simplify the target template registration API target: simplify target_xcopy_init_pt_lun target: remove the unused SCF_CMD_XCOPY_PASSTHROUGH flag target/rd: reduce code duplication in rd_execute_rw() tcm_loop: fixup tpgt string to integer conversion ...
2015-04-22Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds20-1113/+1426
Pull InfiniBand/RDMA updates from Roland Dreier: - IPoIB fixes from Doug Ledford and Erez Shitrit - iSER updates from Sagi Grimberg - mlx4 GUID handling changes from Yishai Hadas - other misc fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (51 commits) mlx5: wrong page mask if CONFIG_ARCH_DMA_ADDR_T_64BIT enabled for 32Bit architectures IB/iser: Rewrite bounce buffer code path IB/iser: Bump version to 1.6 IB/iser: Remove code duplication for a single DMA entry IB/iser: Pass struct iser_mem_reg to iser_fast_reg_mr and iser_reg_sig_mr IB/iser: Modify struct iser_mem_reg members IB/iser: Make fastreg pool cache friendly IB/iser: Move PI context alloc/free to routines IB/iser: Move fastreg descriptor pool get/put to helper functions IB/iser: Merge build page-vec into register page-vec IB/iser: Get rid of struct iser_rdma_regd IB/iser: Remove redundant assignments in iser_reg_page_vec IB/iser: Move memory reg/dereg routines to iser_memory.c IB/iser: Don't pass ib_device to fall_to_bounce_buff routine IB/iser: Remove a redundant struct iser_data_buf IB/iser: Remove redundant cmd_data_len calculation IB/iser: Fix wrong calculation of protection buffer length IB/iser: Handle fastreg/local_inv completion errors IB/iser: Fix unload during ep_poll wrong dereference ib_srpt: convert printk's to pr_* functions ...
2015-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds3-3/+7
Pull networking fixes from David Miller: 1) Fix verifier memory corruption and other bugs in BPF layer, from Alexei Starovoitov. 2) Add a conservative fix for doing BPF properly in the BPF classifier of the packet scheduler on ingress. Also from Alexei. 3) The SKB scrubber should not clear out the packet MARK and security label, from Herbert Xu. 4) Fix oops on rmmod in stmmac driver, from Bryan O'Donoghue. 5) Pause handling is not correct in the stmmac driver because it doesn't take into consideration the RX and TX fifo sizes. From Vince Bridgers. 6) Failure path missing unlock in FOU driver, from Wang Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) net: dsa: use DEVICE_ATTR_RW to declare temp1_max netns: remove BUG_ONs from net_generic() IB/ipoib: Fix ndo_get_iflink sfc: Fix memcpy() with const destination compiler warning. altera tse: Fix network-delays and -retransmissions after high throughput. net: remove unused 'dev' argument from netif_needs_gso() act_mirred: Fix bogus header when redirecting from VLAN inet_diag: fix access to tcp cc information tcp: tcp_get_info() should fetch socket fields once net: dsa: mv88e6xxx: Add missing initialization in mv88e6xxx_set_port_state() skbuff: Do not scrub skb mark within the same name space Revert "net: Reset secmark when scrubbing packet" bpf: fix two bugs in verification logic when accessing 'ctx' pointer bpf: fix bpf helpers to use skb->mac_header relative offsets stmmac: Configure Flow Control to work correctly based on rxfifo size stmmac: Enable unicast pause frame detect in GMAC Register 6 stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree stmmac: Add defines and documentation for enabling flow control stmmac: Add properties for transmit and receive fifo sizes stmmac: fix oops on rmmod after assigning ip addr ...
2015-04-17IB/ipoib: Fix ndo_get_iflinkErez Shitrit2-2/+6
Currently, iflink of the parent interface was always accessed, even when interface didn't have a parent and hence we crashed there. Handle the interface types properly: for a child interface, return the ifindex of the parent, for parent interface, return its ifindex. For child devices, make sure to set the parent pointer prior to invoking register_netdevice(), this allows the new ndo to be called by the stack immediately after the child device is registered. Fixes: 5aa7add8f14b ('infiniband/ipoib: implement ndo_get_iflink') Reported-by: Honggang Li <honli@redhat.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Honggang Li <honli@redhat.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>+ Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-16cxgb4: drop __GFP_NOFAIL allocationMichal Hocko1-1/+1
set_filter_wr is requesting __GFP_NOFAIL allocation although it can return ENOMEM without any problems obviously (t4_l2t_set_switching does that already). So the non-failing requirement is too strong without any obvious reason. Drop __GFP_NOFAIL and reorganize the code to have the failure paths easier. The same applies to _c4iw_write_mem_dma_aligned which uses __GFP_NOFAIL and then checks the return value and returns -ENOMEM on failure. This doesn't make any sense what so ever. Either the allocation cannot fail or it can. del_filter_wr seems to be safe as well because the filter entry is not marked as pending and the return value is propagated up the stack up to c4iw_destroy_listen. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Jan Kara <jack@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-15Merge branches 'cve-fixup', 'ipoib', 'iser', 'misc-4.1', 'or-mlx4' and 'srp' into for-4.1Doug Ledford19-1111/+1421
2015-04-15IB/iser: Rewrite bounce buffer code pathSagi Grimberg3-88/+137
In some rare cases, IO operations may be not aligned to page boundaries. This prevents iser from performing fast memory registration. In order to overcome that iser uses a bounce buffer to carry the transaction. We basically allocate a buffer in the size of the transaction and perform a copy. The buffer allocation using kmalloc is too restrictive since it requires higher order (atomic) allocations for large transactions (which may result in memory exhaustion fairly fast for some workloads). We rewrite the bounce buffer code path to allocate scattered pages and perform a copy between the transaction sg and the bounce sg. Reported-by: Alex Lyakas <alex@zadarastorage.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Bump version to 1.6Sagi Grimberg1-1/+1
Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Remove code duplication for a single DMA entrySagi Grimberg1-27/+21
In singleton scatterlists, DMA memory registration code is taken both for Fastreg and FMR code paths. Move it to a function. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Pass struct iser_mem_reg to iser_fast_reg_mr and iser_reg_sig_mrSagi Grimberg1-43/+32
Instead of passing ib_sge as output variable, we pass the mem_reg pointer to have the routines fill the rkey as well. This reduces code duplication and extra assignments. This is a preparation step to unify some registration logics together. Also, pass iser_fast_reg_mr the fastreg descriptor directly. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Modify struct iser_mem_reg membersSagi Grimberg3-33/+29
No need to keep lkey, va, len variables, we can keep them as struct ib_sge. This will help when we change the memory registration logic. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Make fastreg pool cache friendlySagi Grimberg1-1/+1
Memory regions are resources that are saved in the device caches. Increase the probability for a cache hit by adding the MRU descriptor to pool head. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Move PI context alloc/free to routinesSagi Grimberg1-55/+63
Make iser_[create|destroy]_fastreg_desc shorter, more readable and easily extendable. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Move fastreg descriptor pool get/put to helper functionsSagi Grimberg2-18/+37
Instead of open-coding connection fastreg pool get/put, we introduce iser_reg_desc[get|put] helpers. We aren't setting these static as this will be a per-device routine later on. Also, cleanup iser_unreg_rdma_mem_fastreg a bit. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Merge build page-vec into register page-vecSagi Grimberg1-58/+33
No need for these two separate. Keep it in a single routine like in the fastreg case. This will also make iser_reg_page_vec closer to iser_fast_reg_mr arguments. This is a preparation step for registration flow refactor. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Get rid of struct iser_rdma_regdSagi Grimberg4-70/+53
This struct members other than struct iser_mem_reg are unused, so remove it altogether. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Remove redundant assignments in iser_reg_page_vecSagi Grimberg1-5/+2
Buffer length was assigned twice, and no reason to set va to io_addr and then add the offset, just set va to io_addr + offset. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.