aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-10-24Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds5-7/+7
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds3-4/+5
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits) bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL. vlan: Calling vlan_hwaccel_do_receive() is always valid. tproxy: use the interface primary IP address as a default value for --on-ip tproxy: added IPv6 support to the socket match cxgb3: function namespace cleanup tproxy: added IPv6 support to the TPROXY target tproxy: added IPv6 socket lookup function to nf_tproxy_core be2net: Changes to use only priority codes allowed by f/w tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled tproxy: added tproxy sockopt interface in the IPV6 layer tproxy: added udp6_lib_lookup function tproxy: added const specifiers to udp lookup functions tproxy: split off ipv6 defragmentation to a separate module l2tp: small cleanup nf_nat: restrict ICMP translation for embedded header can: mcp251x: fix generation of error frames can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set can-raw: add msg_flags to distinguish local traffic 9p: client code cleanup rds: make local functions/variables static ... Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and drivers/net/wireless/ath/ath9k/debug.c as per David
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds6-4/+14
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-18Update broken web addresses in the kernel.Justin P. Mattock4-5/+5
The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-16infiniband: fix mlx4 kconfig dependency warningRandy Dunlap1-0/+1
Fix kconfig dependency warning to satisfy dependencies: warning: (MLX4_EN && NETDEVICES && NETDEV_10000 && PCI && INET || MLX4_INFINIBAND && INFINIBAND) selects MLX4_CORE which has unmet direct dependencies (NETDEVICES && NETDEV_10000 && PCI) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann6-4/+14
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-12net: percpu net_device refcountEric Dumazet2-4/+4
We tried very hard to remove all possible dev_hold()/dev_put() pairs in network stack, using RCU conversions. There is still an unavoidable device refcount change for every dst we create/destroy, and this can slow down some workloads (routers or some app servers, mmap af_packet) We can switch to a percpu refcount implementation, now dynamic per_cpu infrastructure is mature. On a 64 cpus machine, this consumes 256 bytes per device. On x86, dev_hold(dev) code : before lock incl 0x280(%ebx) after: movl 0x260(%ebx),%eax incl fs:(%eax) Stress bench : (Sending 160.000.000 UDP frames, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_TRIE) Before: real 1m1.662s user 0m14.373s sys 12m55.960s After: real 0m51.179s user 0m15.329s sys 10m15.942s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27RDMA/cxgb3: Turn off RX coalescing for iWARP connectionsSteve Wise1-2/+4
The HW by default has RX coalescing on. For iWARP connections, this causes a 100ms delay in connection establishement due to the ingress MPA Start message being stalled in HW. So explicitly turn RX coalescing off when setting up iWARP connections. This was causing very bad performance for NP64 gather operations using Open MPI, due to the way it sets up connections on larger jobs. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-23drivers/infiniband: Remove unnecessary casts of private_dataJoe Perches1-2/+2
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-08Merge branches 'cxgb3' and 'nes' into for-linusRoland Dreier4-11/+26
2010-09-08RDMA/nes: Fix hang with modified FIN handling on A0 cardsFaisal Latif2-1/+3
Changing state to CLOSING when FIN is received causes A0 cards to hang. Fix this by checking for A0 cards in FIN handling. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-08RDMA/nes: Change state to closing after FINFaisal Latif1-1/+12
When the driver receives an AE for FIN received, it closes the connection without changing the state of the connection in the hardware to closing. By changing the state to closing, hardware will do a normal close sequence. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-08RDMA/nes: Fix double CLOSE event indication crashFaisal Latif1-8/+10
During a stress testing in a large cluster, multiple close event are detected and BUG() is hit in the iWARP core. The cause is that the active node gave up while waiting for an MPA response from the peer and tried to close the connection by sending RST. The passive node driver receives the RST but is waiting for MPA response from the user. When the MPA accept is received, the driver offloads the connection and sends a CLOSE event. The driver gets an AE indicating RESET received and also sends a CLOSE event, hitting a BUG(). Fix this by correcting RESET handling and sending CLOSE events. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-08RDMA/nes: Write correct register write to set TX pause paramChien Tung1-2/+2
Setting TX pause param writes to the wrong register location causing the adapter to hang. Correct the define used to write the reigster. Addresses: https://bugs.openfabrics.org/show_bug.cgi?id=2116 Reported-by: Shiri Franchi <shirif@voltaire.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-02RDMA/cxgb3: Don't exceed the max HW CQ depthSteve Wise1-1/+1
The max depth supported by T3 is 64K entries. This fixes a bug introduced in commit 9918b28d ("RDMA/cxgb3: Increase the max CQ depth") that causes stalls and possibly crashes in large MPI clusters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-3/+3
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
2010-08-07RDMA/cxgb4: Obtain RDMA QID ranges from LLD/FWSteve Wise3-7/+11
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-07Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds46-494/+575
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits) IB/qib: Add missing <linux/slab.h> include IB/ehca: Drop unnecessary NULL test RDMA/nes: Fix confusing if statement indentation IB/ehca: Init irq tasklet before irq can happen RDMA/nes: Fix misindented code RDMA/nes: Fix showing wqm_quanta RDMA/nes: Get rid of "set but not used" variables RDMA/nes: Read firmware version from correct place IB/srp: Export req_lim via sysfs IB/srp: Make receive buffer handling more robust IB/srp: Use print_hex_dump() IB: Rename RAW_ETY to RAW_ETHERTYPE RDMA/nes: Fix two sparse warnings RDMA/cxgb3: Make needlessly global iwch_l2t_send() static IB/iser: Make needlessly global iser_alloc_rx_descriptors() static RDMA/cxgb4: Add timeouts when waiting for FW responses IB/qib: Fix race between qib_error_qp() and receive packet processing IB/qib: Limit the number of packets processed per interrupt IB/qib: Allow writes to the diag_counters to be able to clear them IB/qib: Set cfgctxts to number of CPUs by default ...
2010-08-06of/device: Replace struct of_device with struct platform_deviceGrant Likely2-3/+3
of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
2010-08-05Merge branches 'cxgb3', 'cxgb4', 'ehca', 'ipath', 'misc', 'nes', 'qib' and 'srp' into for-nextRoland Dreier44-491/+572
2010-08-05IB/qib: Add missing <linux/slab.h> includeDavid Miller1-0/+1
Fix build failure on sparc64 which is missing the include of <linux/slab.h> via <asm/pci.h> that x86, powerpc, ia64, etc. have. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-05IB/ehca: Drop unnecessary NULL testJulia Lawall1-5/+0
list_for_each_entry binds its first argument to a non-null value, and thus any null test on the value of that argument is superfluous. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ iterator I; expression x; statement S,S1,S2; @@ I(x,...) { <... - if (x == NULL && ...) S ...> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-05RDMA/nes: Fix confusing if statement indentationRoland Dreier1-3/+3
Fix confusing indentation that makes a statement look as if it's part of an if statement when in fact it isn't. Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04IB/ehca: Init irq tasklet before irq can happenAlexander Schmidt1-4/+4
Initialize tasklet before interrupts are requested to prevent scheduling of an uninitialized tasklet. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds4-6/+6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-08-04RDMA/nes: Fix misindented codeRoland Dreier1-14/+12
In nes_probe(), a bit of code is indented one tab stop too far. Fix this. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04RDMA/nes: Fix showing wqm_quantaRoland Dreier1-1/+1
In nes_show_wqm_quanta(), the wrong value is printed. Fix this. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04RDMA/nes: Get rid of "set but not used" variablesRoland Dreier5-21/+2
Delete dead code in various places that is shown by gcc 4.6's new -Wunused-but-set-variable warnings. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04RDMA/nes: Read firmware version from correct placeMiroslaw Walukiewicz1-1/+1
Signed-off-by: Mirek Walukiewicz <miroslaw.walukiewicz@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04IB/srp: Export req_lim via sysfsBart Van Assche1-0/+14
Export req_lim via sysfs for debugging. Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com> Acked-by: David Dillow <dave@thedillows.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds6-8/+19
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits) phy/marvell: add 88ec048 support igb: Program MDICNFG register prior to PHY init e1000e: correct MAC-PHY interconnect register offset for 82579 hso: Add new product ID can: Add driver for esd CAN-USB/2 device l2tp: fix export of header file for userspace can-raw: Fix skb_orphan_try handling Revert "net: remove zap_completion_queue" net: cleanup inclusion phy/marvell: add 88e1121 interface mode support u32: negative offset fix net: Fix a typo from "dev" to "ndev" igb: Use irq_synchronize per vector when using MSI-X ixgbevf: fix null pointer dereference due to filter being set for VLAN 0 e1000e: Fix irq_synchronize in MSI-X case e1000e: register pm_qos request on hardware activation ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice net: Add getsockopt support for TCP thin-streams cxgb4: update driver version cxgb4: add new PCI IDs ... Manually fix up conflicts in: - drivers/net/e1000e/netdev.c: due to pm_qos registration infrastructure changes - drivers/net/phy/marvell.c: conflict between adding 88ec048 support and cleaning up the IDs - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req conflict (registration change vs marking it static)
2010-08-04IB/srp: Make receive buffer handling more robustBart Van Assche1-45/+44
The current strategy in ib_srp for posting receive buffers is: * Post one buffer after channel establishment. * Post one buffer before sending an SRP_CMD or SRP_TSK_MGMT to the target. As a result, only the first non-SRP_RSP information unit from the target will be processed. If that first information unit is an SRP_T_LOGOUT, it will be processed. On the other hand, if the initiator receives an SRP_CRED_REQ or SRP_AER_REQ before it receives a SRP_T_LOGOUT, the SRP_T_LOGOUT won't be processed. We can fix this inconsistency by changing the strategy for posting receive buffers to: * Post all receive buffers after channel establishment. * After a receive buffer has been consumed and processed, post it again. A side effect is that the ib_post_recv() call is moved out of the SCSI command processing path. Since __srp_post_recv() is not called directly any more, get rid of it and move the code directly into srp_post_recv(). Also, move srp_post_recv() up in the file to avoid a forward declaration. Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com> Acked-by: David Dillow <dave@thedillows.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04IB/srp: Use print_hex_dump()Bart Van Assche1-13/+2
Replace an open-coded dump of the receive buffer with a call to print_hex_dump(). Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04IB: Rename RAW_ETY to RAW_ETHERTYPEAleksey Senin3-4/+4
Change abbreviated IB_QPT_RAW_ETY to IB_QPT_RAW_ETHERTYPE to make the special QP type easier to understand. cf http://www.mail-archive.com/linux-rdma@vger.kernel.org/msg04530.html Signed-off-by: Aleksey Senin <alekseys@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04RDMA/nes: Fix two sparse warningsOr Gerlitz2-2/+2
Simple changes to fix warnings: CHECK drivers/infiniband/hw/nes/nes_verbs.c nes_verbs.c:1944:45: warning: Using plain integer as NULL pointer nes_verbs.c:1944:48: warning: Using plain integer as NULL pointer CHECK drivers/infiniband/hw/nes/nes_cm.c nes_cm.c:2645:43: warning: mixing different enum types nes_cm.c:2645:43: int enum iw_cm_event_type versus nes_cm.c:2645:43: int enum iw_cm_event_status Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Acked-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04RDMA/cxgb3: Make needlessly global iwch_l2t_send() staticOr Gerlitz1-1/+1
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04IB/iser: Make needlessly global iser_alloc_rx_descriptors() staticOr Gerlitz1-1/+1
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04RDMA/cxgb4: Add timeouts when waiting for FW responsesSteve Wise1-4/+18
Don't hang a host thread if the FW stops responding. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-04Merge branch 'master' into for-nextJiri Kosina19-1166/+194
2010-08-03IB/qib: Fix race between qib_error_qp() and receive packet processingRalph Campbell6-55/+26
When transitioning a QP to the error state, in progress RWQEs need to be marked complete. This also involves releasing the reference count to the memory regions referenced in the SGEs. The locking in the receive packet processing wasn't sufficient to prevent qib_error_qp() from modifying the r_sge state at the same time, thus leading to kernel panics. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-03IB/qib: Limit the number of packets processed per interruptRalph Campbell1-1/+1
Don't processes too many packets without allowing other IRQ functions a chance to run. Otherwise, there is a chance of getting a "soft lockup" messages and poor application response times. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-03IB/qib: Allow writes to the diag_counters to be able to clear themIra Weiny1-1/+20
Signed-off-by: Ira Weiny <weiny2@llnl.gov> Acked-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-03IB/qib: Set cfgctxts to number of CPUs by defaultRalph Campbell2-2/+2
Up to now, we have set the number of available user contexts based on the number of hardware contexts which is set according to the number of available CPUs. This was fine since most CPUs had a power of two number of cores and the chip supported 4, 8, or 16 user contexts. Now that some systems have 12 cores, the default isn't optimal and should be set to 12 even though 16 hardware contexts need to be enabled. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-02RDMA/cxgb4: Set/reset the EP timer inside EP lockSteve Wise1-26/+8
Endpoint timer manipulation needs to be done inside the lock. Otherwise we can get into a situation where a timer is stopped before it is started, which hits the WARN_ON() in stop_ep_timer(). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-02RDMA/cxgb4: Use correct control txqSteve Wise2-4/+10
There is only one control txq per tx channel. So use the port number as the queue index when sending. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-08-02RDMA/cxgb4: Fix race in fini pathSteve Wise1-7/+7
There exists a race condition where the app disconnects, which initiates an orderly close (via rdma_fini()), concurrently with an ingress abort condition, which initiates an abortive close operation. Since rdma_fini() must be called without IRQs disabled, the fini can be called after the QP has been transitioned to ERROR. This is ok, but we need to protect against qp->ep getting NULLed. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-28IB/cm: Check LAP state before sending an MRASean Hefty1-4/+6
NULL pointer dereferences in ib_cm_init_qp_attr() were seen by some users. From a crash dump, I determined that we died in cm_init_qp_rts_attr() (it's inlined, so it doesn't show up in the traceback) on the line labeled below: static int cm_init_qp_rts_attr(struct cm_id_private *cm_id_priv, struct ib_qp_attr *qp_attr, int *qp_attr_mask) { ........ if (cm_id_priv->id.lap_state == IB_CM_LAP_UNINIT) { ..... } else { *qp_attr_mask = IB_QP_ALT_PATH | IB_QP_PATH_MIG_STATE; qp_attr->alt_port_num = cm_id_priv->alt_av.port->port_num; <-die The problem is that the rdma_cm can call ib_send_cm_mra() after a connection has been established. The ib_cm incorrectly assumes that the MRA is in response to a LAP (load alternate path) message, even though no LAP message has been received. The ib_cm needs to check the lap_state before sending an MRA if the cm_id state is established. Reported-by: Arthur Kepner <akepner@sgi.com> Reported-by: Josh England <jjengla@gmail.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-28RDMA/nes: Fix hangs on ifdownFaisal Latif4-6/+33
When ib_unregister_device() is called from netdev stop during ifdown, it sometimes hangs. Changes made to indicate port_err to ib_dispatch_event() during netdev stop and port_active during netdev open. The ib_unregister_device() is only called during remove of the module. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-28RDMA/nes: Store and print eeprom versionChien Tung2-1/+7
Read and print eeprom version and save it off for later use. Also delete a tab. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-28RDMA/nes: Convert pci_table entries to PCI_VDEVICEPeter Huewe1-2/+2
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.