aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds3-47/+24
Quoth David: 1) GRO MAC header comparisons were ethernet specific, breaking other link types. This required a multi-faceted fix to cure the originally noted case (Infiniband), because IPoIB was lying about it's actual hard header length. Thanks to Eric Dumazet, Roland Dreier, and others. 2) Fix build failure when INET_UDP_DIAG is built in and ipv6 is modular. From Anisse Astier. 3) Off by ones and other bug fixes in netprio_cgroup from Neil Horman. 4) ipv4 TCP reset generation needs to respect any network interface binding from the socket, otherwise route lookups might give a different result than all the other segments received. From Shawn Lu. 5) Fix unintended regression in ipv4 proxy ARP responses, from Thomas Graf. 6) Fix SKB under-allocation bug in sh_eth, from Yoshihiro Shimoda. 7) Revert skge PCI mapping changes that are causing crashes for some folks, from Stephen Hemminger. 8) IPV4 route lookups fill in the wildcarded fields of the given flow lookup key passed in, which is fine most of the time as this is exactly what the caller's want. However there are a few cases that want to retain the original flow key values afterwards, so handle those cases properly. Fix from Julian Anastasov. 9) IGB/IXGBE VF lookup bug fixes from Greg Rose. 10) Properly null terminate filename passed to ethtool flash device method, from Ben Hutchings. 11) S3 resume fix in via-velocity from David Lv. 12) Fix double SKB free during xmit failure in CAIF, from Dmitry Tarnyagin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits) net: Don't proxy arp respond if iif == rt->dst.dev if private VLAN is disabled ipv4: Fix wrong order of ip_rt_get_source() and update iph->daddr. netprio_cgroup: fix wrong memory access when NETPRIO_CGROUP=m netprio_cgroup: don't allocate prio table when a device is registered netprio_cgroup: fix an off-by-one bug bna: fix error handling of bnad_get_flash_partition_by_offset() isdn: type bug in isdn_net_header() net: Make qdisc_skb_cb upper size bound explicit. ixgbe: ethtool: stats user buffer overrun ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state ixgbe: do not update real num queues when netdev is going away ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size ixgbe: Fix case of Tx Hang in PF with 32 VFs ixgbe: fix vf lookup igb: fix vf lookup e1000: add dropped DMA receive enable back in for WoL gro: more generic L2 header check IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses zd1211rw: firmware needs duration_id set to zero for non-pspoll frames net: enable TC35815 for MIPS again ...
2012-02-08IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addressesRoland Dreier3-47/+24
Commit a0417fa3a18a ("net: Make qdisc_skb_cb upper size bound explicit.") made it possible for a netdev driver to use skb->cb between its header_ops.create method and its .ndo_start_xmit method. Use this in ipoib_hard_header() to stash away the LL address (GID + QPN), instead of the "ipoib_pseudoheader" hack. This allows IPoIB to stop lying about its hard_header_len, which will let us fix the L2 check for GRO. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06IB/srpt: Don't return freed pointer from srpt_alloc_ioctx_ring()Jesper Juhl1-0/+1
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-03IB/srpt: Fix ERR_PTR() vs. NULL checking confusionDan Carpenter1-3/+3
transport_init_session() and target_fabric_configfs_init() don't return NULL pointers, they only return ERR_PTRs or valid pointers. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-02IB/srpt: Remove unneeded <linux/version.h> includeJesper Juhl1-1/+0
Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-02IB/srpt: Use ARRAY_SIZE() instead of open-codingRoland Dreier1-2/+1
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-02IB/srpt: Use DEFINE_SPINLOCK()/LIST_HEAD()Roland Dreier1-5/+2
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-30Merge branches 'cma', 'ipath', 'misc', 'mlx4', 'nes' and 'qib' into for-nextRoland Dreier20-26/+30
2012-01-30RDMA/nes: Copyright updateTatyana Nikolova14-14/+14
Update copyright information in the source files. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Faisal Latif <Faisal.Latif@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-30IB/mlx4: pass SMP vendor-specific attribute MADs to firmwareJack Morgenstein1-5/+2
In the current code, vendor-specific MADs (e.g with the FDR-10 attribute) are silently dropped by the driver, resulting in timeouts at the sending side and inability to query/configure the relevant feature. However, the ConnectX firmware is able to handle such MADs. For unsupported attributes, the firmware returns a GET_RESPONSE MAD containing an error status. For example, for a FDR-10 node with LID 11: # ibstat mlx4_0 1 CA: 'mlx4_0' Port 1: State: Active Physical state: LinkUp Rate: 40 (FDR10) Base lid: 11 LMC: 0 SM lid: 24 Capability mask: 0x02514868 Port GUID: 0x0002c903002e65d1 Link layer: InfiniBand Extended Port Query (EPI) vendor mad timeouts before the patch: # smpquery MEPI 11 -d ibwarn: [4196] smp_query_via: attr 0xff90 mod 0x0 route Lid 11 ibwarn: [4196] _do_madrpc: retry 1 (timeout 1000 ms) ibwarn: [4196] _do_madrpc: retry 2 (timeout 1000 ms) ibwarn: [4196] _do_madrpc: timeout after 3 retries, 3000 ms ibwarn: [4196] mad_rpc: _do_madrpc failed; dport (Lid 11) smpquery: iberror: [pid 4196] main: failed: operation EPI: ext port info query failed EPI query works OK with the patch: # smpquery MEPI 11 -d ibwarn: [6548] smp_query_via: attr 0xff90 mod 0x0 route Lid 11 ibwarn: [6548] mad_rpc: data offs 64 sz 64 mad data 0000 0000 0000 0001 0000 0001 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 # Ext Port info: Lid 11 port 0 StateChangeEnable:...............0x00 LinkSpeedSupported:..............0x01 LinkSpeedEnabled:................0x01 LinkSpeedActive:.................0x01 Signed-off-by: Jack Morgenstein <jackm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Ira Weiny <weiny2@llnl.gov> Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27RDMA/nes: Fix fast memory registration opcodeTatyana Nikolova1-1/+1
Fix fast memory registration opcode in local invalidate completion. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Donald Wood <Donald.E.Wood@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27RDMA/nes: Fix fast memory registration lengthTatyana Nikolova1-0/+2
Zero high order word of fast memory registration (FMR) length field. FMR length field is 32 bits, so high word should always be zero. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Donald Wood <Donald.E.Wood@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27RDMA/ucma: Discard all events for new connections until acceptedSean Hefty1-1/+4
After reporting a new connection request to user space, the rdma_ucm will discard subsequent events until the user has associated a user space idenfier with the kernel cm_id. This is needed to avoid reporting a reject/disconnect event to the user for a request that they may not have processed. The user space identifier is set once the user tries to accept the connection request. However, the following race exists in ucma_accept(): ctx->uid = cmd.uid; <events may be reported now> ret = rdma_accept(ctx->cm_id, ...); Once ctx->uid has been set, new events may be reported to the user. While the above mentioned race is avoided, there is an issue that the user _may_ receive a reject/disconnect event if rdma_accept() fails, depending on when the event is processed. To simplify the use of rdma_accept(), discard all events unless rdma_accept() succeeds. This problem was discovered based on questions from Roland Dreier <roland@purestorage.com>. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27IB/qib: Roll back PCIe tuning changeMike Marciniszyn1-1/+1
Commit 8d4548f2b ("IB/qib: Default some module parameters optimally") introduced an issue with older root complexes. They cannot handle the pcie_caps of 0x51 (MaxReadReq 4096, MaxPayload=256). A typical diagnostic in this situation reported by syslog contains the text: [PCIe Poisoned TLP][Send DMA memory read] Restore the module paramter default to zero with will avoid any changes in the root complex. Reviewed-by: Mark Debbage <mark.debbage@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27IB/qib: Use GFP_ATOMIC when locks are heldJulia Lawall1-1/+1
alloc_dummy_hdrq() is called with locks held and thus should not use GFP_KERNEL. The semantic patch that makes this report is available in scripts/coccinelle/locks/call_kern.cocci. Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27RDMA/nes: Add missing rcu_read_unlock() in nes_addr_resolve_neigh()Roland Dreier1-2/+3
Make sure all exit paths from this function unlock everything. Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27RDMA/nes: Fix for sending MPA reject frameTatyana Nikolova1-0/+3
Set a reject flag, when sending MPA reject message to inform the peer that the application has rejected the connection. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Faisal Latif <Faisal.Latif@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27IB/ipath: Calling PTR_ERR() on right variable in create_file()Dan Carpenter1-1/+1
"dentry" is a valid pointer. "*dentry" was intended. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27RDMA/core: Fix kernel panic by always initializing qp->usecntBernd Schubert2-1/+2
We have just been investigating kernel panics related to cq->ibcq.event_handler() completion calls. The problem is that ib_destroy_qp() fails with -EBUSY. Further investigation revealed qp->usecnt is not initialized. This counter was introduced in linux-3.2 by commit 0e0ec7e0638e ("RDMA/core: Export ib_open_qp() to share XRC TGT QPs") but it only gets initialized for IB_QPT_XRC_TGT, but it is checked in ib_destroy_qp() for any QP type. Fix this by initializing qp->usecnt for every QP we create. Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Signed-off-by: Sven Breuner <sven.breuner@itwm.fraunhofer.de> [ Initialize qp->usecnt in uverbs too. - Sean ] Signed-off-by: Sean Hefty <sean.hefty@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-18Merge branch 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds7-0/+4672
* 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: ib_srpt: Initial SRP Target merge for v3.3-rc1
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell3-7/+7
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13module_param: avoid bool abuse, add bint for special cases.Rusty Russell1-1/+1
For historical reasons, we allow module_param(bool) to take an int (or an unsigned int). That's going away. A few drivers really want an int: they set it to -1 and a parameter will set it to 0 or 1. This sucks: reading them from sysfs will give 'Y' for both -1 and 1, but if we change it to an int, then the users might be broken (if they did "param" instead of "param=1"). Use a new 'bint' parser for them. (ntfs has a different problem: it needs an int for debug_msgs because it's also exposed via sysctl.) Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux390@de.ibm.com Cc: Anton Altaparmakov <anton@tuxera.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: lm-sensors@lm-sensors.org Cc: linux-rdma@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: alsa-devel@alsa-project.org Acked-by: Takashi Iwai <tiwai@suse.de> (For the sound part) Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> (For the hwmon driver) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-08Merge tag 'infiniband-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds21-67/+105
infiniband changes for 3.3 merge window * tag 'infiniband-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: rdma/core: Fix sparse warnings RDMA/cma: Fix endianness bugs RDMA/nes: Fix terminate during AE RDMA/nes: Make unnecessarily global nes_set_pau() static RDMA/nes: Change MDIO bus clock to 2.5MHz IB/cm: Fix layout of APR message IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoE IB/qib: Default some module parameters optimally IB/qib: Optimize locking for get_txreq() IB/qib: Fix a possible data corruption when receiving packets IB/qib: Eliminate 64-bit jiffies use IB/qib: Fix style issues IB/uverbs: Protect QP multicast list
2012-01-08Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds6-10/+10
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-04Merge branches 'cma', 'misc', 'mlx4', 'nes', 'qib' and 'uverbs' into for-nextRoland Dreier19-58/+99
2012-01-04rdma/core: Fix sparse warningsSean Hefty2-6/+3
Clean up sparse warnings in the rdma core layer. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04RDMA/cma: Fix endianness bugsSean Hefty1-3/+3
Fix endianness bugs reported by sparse in the RDMA core stack. Note that these are real bugs, but don't affect any existing code to the best of my knowledge. The mlid issue would only affect kernel users of rdma_join_multicast which have the rdma_cm attach/detach its QP. There are no current in tree users that do this. (rdma_join_multicast may be used called by user space applications, which does not have this issue.) And the pkey setting is simply returned as informational. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04RDMA/nes: Fix terminate during AETatyana Nikolova2-4/+1
Fix for reset which happens right after sending a terminate message. Terminate timer is not deleted when the connection is closed. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Faisal Latif <Faisal.Latif@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04RDMA/nes: Make unnecessarily global nes_set_pau() staticTatyana Nikolova1-1/+1
Warned about by sparse. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Faisal Latif <Faisal.Latif@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04RDMA/nes: Change MDIO bus clock to 2.5MHzTatyana Nikolova1-1/+1
Change the PHY clock divisor to make the MDIO clock 2.5MHz, instead of 3.5MHz (which is out of spec). Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Faisal Latif <Faisal.Latif@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/cm: Fix layout of APR messageEli Cohen1-0/+1
Add a missing 16-bit reserved field between ap_status and info fields. Signed-off-by: Eli Cohen <eli@mellanox.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoEOr Gerlitz3-4/+8
For IBoE, SLs 0-7 are mapped to Ethernet 802.1Q user priority bits (pbits) which are part of the VLAN tag, SLs 8-15 are reserved. Under Ethernet, the ConnectX firmware treats (decode/encode) the four bit SL field in various constructs such as QPC / UD WQE / CQE as PPP0 and not as 0PPP. This correlates well to the fact that within the vlan tag the pbits are located in bits 15-13 and not 12-14. The current code wasn't consistent around that area - the encoding was correct for the IBoE QPC.path.schedule_queue field, but was wrong for IBoE CQEs and when MLX header was built. These inconsistencies resulted in wrong SL <--> wire 802.1Q pbits mapping, which is fixed by using SL <--> PPP0 all around the place. Signed-off-by: Oren Duer <oren@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/qib: Default some module parameters optimallyMike Marciniszyn2-3/+3
Minimize the need for users to have to set module parameters to get good performance. The following two parameters are changed: - rcvhdrcnt to twice the rcvegrcnt - pcie_caps=0x51 The rcvhdrcnt at twice the egrcount allows the preemptive NAK code during reception to function in 100% of the cases rather than a sender jiffies-based timeout. The pcie_caps default of 0x51 will set the proposed MaxPayload and MaxReceiveReqest to 256 and 4096 respectively. The capabilities on the root complex will be used to limit those values. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/qib: Optimize locking for get_txreq()Mike Marciniszyn1-10/+33
The current code locks the QP s_lock, followed by the pending_lock, I guess to to protect against the allocate failing. This patch only locks the pending_lock, assuming that the empty case is an exeception, in which case the pending_lock is dropped, and the original code is executed. This will save a lock of s_lock in the normal case. The observation is that the sdma descriptors will deplete at twice the rate of txreq's, so this should be rare. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/qib: Fix a possible data corruption when receiving packetsRam Vepa3-4/+10
Prevent a receive data corruption by ensuring that the write to update the rcvhdrheadn register to generate an interrupt is at the very end of the receive processing. Signed-off-by: Ramkrishna Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/qib: Eliminate 64-bit jiffies useMike Marciniszyn4-22/+20
The qib driver makes use of the the 64-bit jiffies API. Code inspection reveals that that version of the API is not really required. This patch converts to use the "normal" jiffies. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/qib: Fix style issuesMike Marciniszyn4-5/+4
More style issues revealed with checkpatch.pl -f. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03IB/uverbs: Protect QP multicast listEli Cohen1-4/+17
Userspace verbs multicast attach/detach operations on a QP are done while holding the rwsem of the QP for reading. That's not sufficient since a reader lock allows more than one reader to acquire the lock. However, multicast attach/detach does list manipulation that can corrupt the list if multiple threads run in parallel. Fix this by acquiring the rwsem as a writer to serialize attach/detach operations. Add idr_write_qp() and put_qp_write() to encapsulate this. This fixes oops seen when running applications that perform multicast joins/leaves. Reported by: Mike Dubman <miked@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03infiniband: umode_t noise, including open-coded S_ISDIR()Al Viro2-6/+6
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch ->is_visible() to returning umode_tAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch device_get_devnode() and ->devnode() to umode_t *Al Viro3-3/+3
both callers of device_get_devnode() are only interested in lower 16bits and nobody tries to return anything wider than 16bit anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-4/+12
Conflicts: net/bluetooth/l2cap_core.c Just two overlapping changes, one added an initialization of a local variable, and another change added a new local variable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19Merge branches 'cma', 'mlx4' and 'qib' into for-nextRoland Dreier2-4/+6
2011-12-19IB/qib: Correct sense on freectxts increment and decrementMike Marciniszyn1-2/+2
Commit 53ab1c64983 ("IB/qib: Correct nfreectxts for multiple HCAs") reversed the increments and decrements of dd->nfreectxts. Fix it. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-12-19RDMA/cma: Verify private data lengthSean Hefty1-0/+6
private_data_len is defined as a u8. If the user specifies a large private_data size (> 220 bytes), we will calculate a total length that exceeds 255, resulting in private_data_len wrapping back to 0. This can lead to overwriting random kernel memory. Avoid this by verifying that the resulting size fits into a u8. Reported-by: B. Thery <benjamin.thery@bull.net> Addresses: <http://bugs.openfabrics.org/bugzilla/show_bug.cgi?id=2335> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-12-16ib_srpt: Initial SRP Target merge for v3.3-rc1Bart Van Assche7-0/+4672
This patch adds the kernel module ib_srpt SCSI RDMA Protocol (SRP) target implementation conforming to the SRP r16a specification for the mainline drivers/target infrastructure. This driver was originally developed by Vu Pham and has been optimized by Bart Van Assche and merged into upstream LIO based on his srpt-lio-4.1 branch here: https://github.com/bvanassche/srpt-lio/commits/srpt-lio-4.1/ This updated patch also contains the following two changes from lio-core-2.6.git/master. One is to fix a bug with 1 >= task->task_sg[] chained mappings in ib_srpt, and the other to convert the configfs control plane to reference IB Port GUID and struct srpt_port directly following mainline v4.x target_core_fabric_configfs.c convertion for ib_srpt to work with rtslib/rtsadmin v2 code. These seperate patches can be found here: ib_srpt: Fix bug with chainged SGLs in srpt_map_sg_to_ib_sge http://www.risingtidesystems.com/git/?p=lio-core-2.6.git;a=commitdiff;h=ea485147563b6555a97dbf811825fbb586519252 ib_srpt: Convert se_wwn endpoint reference to struct srpt_port->port_wwn http://www.risingtidesystems.com/git/?p=lio-core-2.6.git;a=commitdiff;h=4e544a210acb227df1bb4ca5086e65bdf4e648ea This also includes the following recent v1 -> v2 review changes: ib_srpt: Fix potential out-of-bounds array access ib_srpt: Avoid failed multipart RDMA transfers ib_srpt: Fix srpt_alloc_fabric_acl failure case return value ib_srpt: Update comments to reference $driver/$port layout ib_srpt: Fix sport->port_guid formatting code ib_srpt: Remove legacy use_port_guid_in_session_name module parameter ib_srpt: Convert srp_max_rdma_size into per port configfs attribute ib_srpt: Convert srp_max_rsp_size into per port configfs attribute ib_srpt: Convert srpt_sq_size into per port configfs attribute and v2 -> v3 review changes: ib_srpt: Fix possible race with srp_sq_size in srpt_create_ch_ib ib_srpt: Fix possible race with srp_max_rsp_size in srpt_release_channel_work ib_srpt: Fix up MAX_SRPT_RDMA_SIZE define ib_srpt: Make srpt_map_sg_to_ib_sge() failure case return -EAGAIN ib_srpt: Convert port_guid to use subnet_prefix + interface_id formatting ib_srpt: Make srpt_check_stop_free return kref_put status ib_srpt: Make compilation with BUG=n proceed` ib_srpt: Use new target_core_fabric.h include ib_srpt: Check hex2bin() return code to silence build warning Cc: Bart Van Assche <bvanassche@acm.org> Cc: Roland Dreier <roland@purestorage.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Vu Pham <vu@mellanox.com> Cc: David Dillow <dillowda@ornl.gov> Signed-off-by: Nicholas A. Bellinger <nab@risingtidesystems.com>
2011-12-13mlx4_ib: disable SRIOV mode for IB ports (not yet supported)Jack Morgenstein1-0/+5
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13mlx4_core: Add "native" argument to mlx4_cmd and its callers (where needed)Jack Morgenstein2-5/+8
For SRIOV, some Hypervisor commands can be executed directly (native = 1). Others should go through the command wrapper flow (for tracking resource usage, for example, or for changing some HCA configurations that slaves need to be notified of). This patch sets the groundwork for this capability -- adding the correct value of "native" in each case. Note that if SRIOV is not activated, this parameter has no effect. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13mlx4: Extanding port_mask functionalityJack Morgenstein1-1/+1
Port mask now has additional state. Port can be set as "none". In this case neither the mlx4_en or mlx4_ib drivers take ownership of the port. In multifunction mode there is an option to set the vfs as single ported devices. (in single function mode, both physical ports belong to same function) Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06IB/mlx4: Fix shutdown crash accessing a non-existent bitmapRoland Dreier1-2/+4
Commit cfcde11c3d7a ("IB/mlx4: Use flow counters on IBoE ports") added code that sets elements of counters[] to -1 if no counter is allocated, but then goes ahead and passes every entry to mlx4_counter_free() on shutdown. This is a bad idea, especially if MLX4_DEV_CAP_FLAG_COUNTERS isn't set so there isn't even an underlying bitmap to free from. Tested-by: Sean Hefty <sean.hefty@intel.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.