| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add nldev init and exit flows to the RDMA/core.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
Introduce new defines to rdma_netlink.h, so the RDMA configuration tool
will be able to communicate with RDMA subsystem by using the shared defines.
The addition of new client (NLDEV) revealed the fact that we exposed by
mistake the RDMA_NL_I40IW define which is not backed by any RDMA netlink
by now and it won't be exposed in the future too. So this patch reuses
the value and deletes the old defines.
The NLDEV operates with objects. The struct ib_device has two straightforward
objects: device itself and ports of that device.
This brings us to propose the following commands to work on those objects:
* RDMA_NLDEV_CMD_{GET,SET,NEW,DEL} - works on ib_device itself
* RDMA_NLDEV_CMD_PORT_{GET,SET,NEW,DEL} - works on ports of specific ib_device
Those commands receive/return the device index (RDMA_NLDEV_ATTR_DEV_INDEX)
and port index (RDMA_NLDEV_ATTR_PORT_INDEX). For device object accesses,
the RDMA_NLDEV_ATTR_PORT_INDEX will return the maximum number of ports
for specific ib_device and for port access the actual port index.
The port index starts from 1 to follow RDMA/core internal semantics and
the sysfs exposed knobs.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
Add Mellanox to the copyright header.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
RDMA_NL_LS protocol is actually does not dump anything,
but sets data and it should be handled by doit callback.
This patch actually converts RDMA_NL_LS to doit callback, while
preserving IWCM and RDMA_CM flows through netlink_dump_start().
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
Introduce intermediate variable to store access to fields
of cb_table.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
The .doit callback is used by netlink core to differentiate
between get and set operations. Common convention is to use
that call for command operations like (SET, ADD, e.t.c.) and/or
access without NLF_M_DUMP flag.
This commit adds proper declaration and implementation
to RDMA netlink.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
This patch adds static device index in similar fashion to
already available in netdev world (struct net->ifindex).
In downstream patches, the RDMA nelink will use this idx-to-ib_device
conversion, so as part of this commit, we are exposing the translation
function to be visible for IB/core users.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
The coming nldev needs to iterate over all IB devices in the system
and in order to not expose the ib_devices list outside the devices.c,
it is necessary to provide function iterator.
Current version is written explicitly for nldev callback to avoid
over-engineering at this stage, but it can be easily extended for
other types.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
The RDMA netlink client infrastructure was removed and made obsolete.
The old infrastructure defined struct ibnl_client_cbs. Now that all
uses of this have been updated to the new infrastructure, rename the
struct to be compliant with the current stack naming standards:
struct rdma_nl_cbs.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
Make ibnl_chk_listeners function to be one line by removing
unneeded comparison.
Rename that function to be complaint to other functions in RDMA netlink.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
The pointer to netlink header was not used in the ibnl_multicast
function, so let's remove it and simplify the function
signature.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
Netlink message header is not needed for unicast reply, hence remove it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
Reuse standard macros to cancel the netlink message
in case of error.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
Add ability to provide flags to control RDMA netlink callbacks
and convert addr.c and sa_query.c to be first users of such
infrastructure. It allows to move their CAP_NET_ADMIN checks
into netlink core.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
The iwcm exports functions which are not used outside of ib_core.
This patch simply removes these EXPORT_SYMBOLS.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Chien Tin Tung <chien.tin.tung@intel.com>
|
|
RDMA netlink implementation guarantees that supplied
client number is in allowed range.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Chien Tin Tung <chien.tin.tung@intel.com>
|
|
The standard netlink_rcv_skb function skips messages without
NLM_F_REQUEST flag in it, while SA netlink client issues them.
In commit bc10ed7d3d19 ("IB/core: Add rdma netlink helper functions")
the local function was introduced to allow such messages.
This led to double pass for every incoming message.
In this patch, we unify that local implementation and netlink_rcv_skb
functions, so there will be no need for double pass anymore.
As a outcome, this combined function gained more strict check
for NLM_F_REQUEST flag and it is now allowed for SA pathquery
client only.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
Owner field is not needed to be set because netlink is part of ib_core
which will be unloaded last after all other modules are unloaded.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
RDMA netlink has a complicated infrastructure for dynamically
registering and de-registering netlink clients to the NETLINK_RDMA
group. The complicated portion of this code is not widely used because
2 of the 3 current clients are statically compiled together with
netlink.c. The infrastructure, therefore, is deemed overkill.
Refactor the code to eliminate the dynamically added clients. Now all
clients are pre-registered in a client array at compile time, and at run
time they merely check-in with the infrastructure to pass their callback
table for inclusion in the pre-sized client array.
This also allows for future cleanups and removal of unneeded code in the
iwcm* netlink handler.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Chien Tin Tung <chien.tin.tung@intel.com>
|
|
The UDP offload conflict is dealt with by simply taking what is
in net-next where we have removed all of the UFO handling code
entirely.
The TCP conflict was a case of local variables in a function
being removed from both net and net-next.
In netvsc we had an assignment right next to where a missing
set of u64 stats sync object inits were added.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a wait/retry version of ibnl_unicast, ibnl_unicast_wait,
and modify ibnl_unicast to not wait/retry. This eliminates
the undesirable wait for future users of ibnl_unicast.
Change Portmapper calls originating from kernel to user-space
to use ibnl_unicast_wait and take advantage of the wait/retry
logic in netlink_unicast.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Simply refer to the generic affinity mask helper.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
If extended LIDs are being used, a connection request contains
OPA GIDs in them. Extract the lids from the OPA gids and populate
slid/dlid fields in the path records that are created when handling
a connection request.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When handling an incoming conection request, ib_cm creates
either an IB or an OPA path record based on the gid field
in the request.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add OPA path record support to the Connection Manager.
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
slid field in struct ib_wc is increased to 32 bits.
This enables core components to use larger LIDs if needed.
The user ABI is unchanged and return 16 bit values when queried.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
sm_lid field in struct ib_port_attr is increased to 32 bits. This
enables core components to use larger LIDs if needed.
The user ABI is unchanged and return 16 bit values when queried.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
lid field in struct ib_port_attr is increased to 32 bits. This enables core
components to use larger LIDs if needed.
The user ABI is unchanged and return 16 bit values when queried.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
MAD RMPP contains slid field which is 16 bits in
length, increase it to 32 bits.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
IPoIB contains local_lid field which is 16 bits in
length, increase it to 32 bits.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
srpt contains lid and sm_lid fields which are 16 bits in
length, increase them to 32 bits.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
OPA address handle atttibutes that have 32 bit LIDs would have to
be converted to IB address handle attribute with the LID field
programmed in the GID before copying to user space.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
IPoIB fixes for 4.13
The patchset provides various fixes for IPoIB. It is combination of
fixes to various issues discovered during verification along with
static checkers cleanup patches.
Most of the patches are from pre-git era and hence lack of Fixes lines.
There is one exception in this IPoIB group - addition of patch revert:
Revert "IB/core: Allow QP state transition from reset to error", but
it followed by proper fix to the annoying print, so I thought it is
appropriate to include it.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The hns_roce_v1_create_lp_qp() returns NULL on error, not error pointers.
Fixes: bfcc681bd09d ("IB/hns: Fix the bug when free mr")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The extended address vector is the highest bit in be32 variable,
but it was compared with the lowest. This patch fixes the endianness
of that check and removes already declared define.
Fixes: 17d2f88f92ce ("IB/mlx5: Add ODP atomics support")
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Uverbs device should be cleaned up only when there is no
potential usage of.
As part of ib_uverbs_remove_one which might be triggered upon reset flow
the device reference count is decreased as expected and leave the final
cleanup to the FDs that were opened.
Current code increases reference count upon opening a new command FD and
decreases it upon closing the file. The event FD is opened internally
and rely on the command FD by taking on it a reference count.
In case that the command FD was closed and just later the event FD we
may ensure that the device resources as of srcu are still alive as they
are still in use.
Fixing the above by moving the reference count decreasing to the place
where the command FD is really freed instead of doing that when it was
just closed.
fixes: 036b10635739 ("IB/uverbs: Enable device removal when there are active user space applications")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
initialize to zero the response structure to prevent
the leakage of "resp.reserved" field.
drivers/infiniband/core/uverbs_cmd.c:1178 ib_uverbs_resize_cq() warn:
check that 'resp.reserved' doesn't leak information
Fixes: 33b9b3ee9709 ("IB: Add userspace support for resizing CQs")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Currently while resolving IP address to MAC address single delayed work
is used for resolving multiple such resolve requests. This singled work
is essentially performs two tasks.
(a) any retry needed to resolve and
(b) it executes the callback function for all completed requests
While work is executing callbacks, any new work scheduled on for this
workqueue is lost because workqueue has completed looking at all pending
requests and now looking at callbacks, but work is still under
execution. Any further retry to look at pending requests in
process_req() after executing callbacks would lead to similar race
condition (may be reduce the probably further but doesn't eliminate it).
Retrying to enqueue work that from queue_req() context is not something
rest of the kernel modules have followed.
Therefore fix in this patch utilizes kernel facility to enqueue multiple
work items to a workqueue. This ensures that no such requests
gets lost in synchronization. Request list is still maintained so that
rdma_cancel_addr() can unlink the request and get the completion with
error sooner. Neighbour update event handling continues to be handled in
same way as before.
Additionally process_req() work entry cancels any pending work for a
request that gets completed while processing those requests.
Originally ib_addr was ST workqueue, but it became MT work queue with
patch of [1]. This patch again makes it similar to ST so that
neighbour update events handler work item doesn't race with
other work items.
In one such below trace, (though on 4.5 based kernel) it can be seen
that process_req() never executed the callback, which is likely for an
event that was schedule by queue_req() when previous callback was
getting executed by workqueue.
[<ffffffff816b0dde>] schedule+0x3e/0x90
[<ffffffff816b3c45>] schedule_timeout+0x1b5/0x210
[<ffffffff81618c37>] ? ip_route_output_flow+0x27/0x70
[<ffffffffa027f9c9>] ? addr_resolve+0x149/0x1b0 [ib_addr]
[<ffffffff816b228f>] wait_for_completion+0x10f/0x170
[<ffffffff810b6140>] ? try_to_wake_up+0x210/0x210
[<ffffffffa027f220>] ? rdma_copy_addr+0xa0/0xa0 [ib_addr]
[<ffffffffa0280120>] rdma_addr_find_l2_eth_by_grh+0x1d0/0x278 [ib_addr]
[<ffffffff81321297>] ? sub_alloc+0x77/0x1c0
[<ffffffffa02943b7>] ib_init_ah_from_wc+0x3a7/0x5a0 [ib_core]
[<ffffffffa0457aba>] cm_req_handler+0xea/0x580 [ib_cm]
[<ffffffff81015982>] ? __switch_to+0x212/0x5e0
[<ffffffffa04582fd>] cm_work_handler+0x6d/0x150 [ib_cm]
[<ffffffff810a14c1>] process_one_work+0x151/0x4b0
[<ffffffff810a1940>] worker_thread+0x120/0x480
[<ffffffff816b074b>] ? __schedule+0x30b/0x890
[<ffffffff810a1820>] ? process_one_work+0x4b0/0x4b0
[<ffffffff810a1820>] ? process_one_work+0x4b0/0x4b0
[<ffffffff810a6b1e>] kthread+0xce/0xf0
[<ffffffff810a6a50>] ? kthread_freezable_should_stop+0x70/0x70
[<ffffffff816b53a2>] ret_from_fork+0x42/0x70
[<ffffffff810a6a50>] ? kthread_freezable_should_stop+0x70/0x70
INFO: task kworker/u144:1:156520 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
kworker/u144:1 D ffff883ffe1d7600 0 156520 2 0x00000080
Workqueue: ib_addr process_req [ib_addr]
ffff883f446fbbd8 0000000000000046 ffff881f95280000 ffff881ff24de200
ffff883f66120000 ffff883f446f8008 ffff881f95280000 ffff883f6f9208c4
ffff883f6f9208c8 00000000ffffffff ffff883f446fbbf8 ffffffff816b0dde
[1] http://lkml.iu.edu/hypermail/linux/kernel/1608.1/05834.html
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Two minor conflicts in virtio_net driver (bug fix overlapping addition
of a helper) and MAINTAINERS (new driver edit overlapping revamp of
PHY entry).
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Always initiate an offline transition request
when a link down occurs. The firmware will
use this request to confirm that the driver
has seen the link down message. A host version
is set to indicate this driver behavior to the
firmware.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When link interrupts occur, multiple link down requests
could be queued up when only one is needed. This could get
the hfi1 out of sync with its link partner during LNI.
Only allow one link down request to be queued at any one time.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Currently, link down interrupts queue link entries
on a workqueue intended for sending events only.
Create a workqueue for queuing link events.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The server side of qperf panics as follows:
[242446.336860] IP: report_bug+0x64/0x10
[242446.341031] PGD 1c0c067
[242446.341032] P4D 1c0c067
[242446.343951] PUD 1c0d063
[242446.346870] PMD 8587ea067
[242446.349788] PTE 800000083e14016
[242446.352901]
[242446.358352] Oops: 0003 [#1] SM
[242446.437919] CPU: 1 PID: 7442 Comm: irq/92-hfi1_0 k Not tainted 4.12.0-mam-asm #1
[242446.446365] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/201
[242446.458397] task: ffff8808392d2b80 task.stack: ffffc9000664000
[242446.465097] RIP: 0010:report_bug+0x64/0x10
[242446.469859] RSP: 0018:ffffc900066439c0 EFLAGS: 0001000
[242446.475784] RAX: ffffffffa06647e4 RBX: ffffffffa06461e1 RCX: 000000000000000
[242446.483840] RDX: 0000000000000907 RSI: ffffffffa0675040 RDI: ffffffffffff740
[242446.491897] RBP: ffffc900066439e0 R08: 0000000000000001 R09: 000000000000025
[242446.499953] R10: ffffffff81a253df R11: 0000000000000133 R12: ffffc90006643b3
[242446.508010] R13: ffffffffa065bbf0 R14: 00000000000001e5 R15: 000000000000000
[242446.516067] FS: 0000000000000000(0000) GS:ffff88085f640000(0000) knlGS:000000000000000
[242446.525191] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003
[242446.531698] CR2: ffffffffa06647ee CR3: 0000000001c09000 CR4: 00000000001406e
[242446.539756] Call Trace
[242446.542582] fixup_bug+0x2c/0x5
[242446.546277] do_trap+0x12b/0x18
[242446.549972] do_error_trap+0x89/0x11
[242446.554171] ? hfi1_copy_sge+0x271/0x2b0 [hfi1
[242446.559324] ? ttwu_do_wakeup+0x1e/0x14
[242446.563795] ? ttwu_do_activate+0x77/0x8
[242446.568363] do_invalid_op+0x20/0x3
[242446.572448] invalid_op+0x1e/0x3
[242446.576247] RIP: 0010:hfi1_copy_sge+0x271/0x2b0 [hfi1
[242446.582075] RSP: 0018:ffffc90006643be8 EFLAGS: 0001004
[242446.587999] RAX: 0000000000000000 RBX: ffff88083e0fa240 RCX: 000000000000000
[242446.596058] RDX: 0000000000000000 RSI: ffff880842508000 RDI: ffff88083e0fa24
[242446.604116] RBP: ffffc90006643c28 R08: 0000000000000000 R09: 000000000000000
[242446.612172] R10: ffffc90009473640 R11: 0000000000000133 R12: 000000000000000
[242446.620228] R13: 0000000000000000 R14: 0000000000002000 R15: ffff88084250800
[242446.628293] ? hfi1_copy_sge+0x1a1/0x2b0 [hfi1
[242446.633449] hfi1_rc_rcv+0x3da/0x1270 [hfi1
[242446.638312] ? sc_buffer_alloc+0x113/0x150 [hfi1
[242446.643662] hfi1_ib_rcv+0x1c9/0x2e0 [hfi1
[242446.648428] process_receive_ib+0x19a/0x270 [hfi1
[242446.653866] ? process_rcv_qp_work+0xd2/0x160 [hfi1
[242446.659505] handle_receive_interrupt_nodma_rtail+0x184/0x2e0 [hfi1
[242446.666693] ? irq_finalize_oneshot+0x100/0x10
[242446.671846] receive_context_thread+0x1b/0x140 [hfi1
[242446.677576] irq_thread_fn+0x1e/0x4
[242446.681659] irq_thread+0x13c/0x1b
[242446.685646] ? irq_forced_thread_fn+0x60/0x6
[242446.690604] kthread+0x112/0x15
[242446.694298] ? irq_thread_check_affinity+0xe0/0xe
[242446.699738] ? kthread_park+0x60/0x6
[242446.703919] ? do_syscall_64+0x67/0x15
[242446.708292] ret_from_fork+0x25/0x3
[242446.712374] Code: 63 78 04 44 0f b7 70 08 41 89 d0 4c 8d 2c 38 41 83 e0 01 f6 c2 02 74 17 66 45 85 c0 74 11 f6 c2 04 b9 01 00 00 00 75 bb 83 ca 04 <66> 89 50 0a 66 45 85 c0 74 52 0f b6 48 0b 41 0f b7 f6 4d 89 e0
[242446.733527] RIP: report_bug+0x64/0x100 RSP: ffffc900066439c
[242446.739935] CR2: ffffffffa06647e
[242446.743763] ---[ end trace 0e90a20d0aa494f7 ]--
The root cause is that the qib/hfi1 post receive call to rvt_lkey_ok()
doesn't interpret the new return value from rvt_lkey_ok() properly
leading to an mr reference count underrun.
Additionally, remove an unused argument in rvt_sge_adjacent()
aw well as an unneeded incr local in rvt_post_one_wr().
Fixes: Commit 14fe13fcd3af ("IB/rdmavt: Compress adjacent SGEs in rvt_lkey_ok()")
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The error messages when checksum validation of the platform
configuration fields populated into the ASIC scratch registers fails are
ambiguous. Disambiguate them.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The allocate_ctxt() function adds the context to the fd data structure.
Since the context is not completely initialized, this can cause confusion
as to whether the context is valid or not.
Move the fd reference from allocate_ctxt() to setup_base_ctxt().
Update the necessary functions to be aware of this move.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Fix issue where a disabled port can be enabled by
inserting a cable. The port should be explicitly
enabled instead.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
There is a window that allows other threads to read state of
'host_link_state' as a new, before the hardware actual state is set.
This patch closes the window by indicating a new state only after
hardware transition is complete.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
A copy_to_user() call assumes that two members of a data structure
are sequential. Since this may not always be true, separate the copies
to ensure a safe copy.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
There is a window where the FM can read the buffer control table
and decide not to program buffers. When a port goes down, the code
clears the table and if it is not programmed, posted SDMA descriptors
will never complete due to no buffer credits.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
During PCIe initialization some registers' values from
PCI config space are saved in order to restore them later
(i.e. after reset). Restoring those value is done by a
function called restore_pci_variables, while saving them
is put directly into function hfi1_pcie_ddinit.
Move saving values to a separate function in the image
of restoring functionality.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Bartlomiej Dudek <bartlomiej.dudek@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
Leon Romanovsky
David S. Miller
Ismail, Mustafa
Sagi Grimberg
Dasaratharaman Chandramouli
Hiatt, Don
Doug Ledford
Dan Carpenter
Yishai Hadas
Parav Pandit
Sebastian Sanchez
Mike Marciniszyn
Jan Sokolowski
Michael J. Ruhl
Alex Estrin
Bartlomiej Dudek