aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2017-06-27IB/hfi1: Handle missing magic values in config fileJan Sokolowski1-6/+5
Driver does not check whether proper configuration file exist in EPROM, and treats empty partition as possible valid configuration, preventing fallback to default firmware. Change EPROM read function to treat missing magic number as read error. Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Resolve kernel panics by reference counting receive contextsMichael J. Ruhl4-34/+85
Base receive contexts can be used by sub contexts. Because of this, resources for the context cannot be completely freed until all sub contexts are done using the base context. Introduce a reference count so that the base receive context can be freed only when all sub contexts are done with it. Use the provided function call for setting default send context integrity rather than the manual method. The cleanup path does not set all variables back to NULL after freeing resources. Since the clean up code can get called more than once, (e.g. during context close and on the error path), it is necessary to make sure that all the variables are NULLed. Possible crash are: BUG: unable to handle kernel paging request at 0000000001908900 IP: read_csr+0x24/0x30 [hfi1] RIP: 0010:read_csr+0x24/0x30 [hfi1] Call Trace: sc_disable+0x40/0x110 [hfi1] hfi1_file_close+0x16f/0x360 [hfi1] __fput+0xe7/0x210 ____fput+0xe/0x10 or kernel BUG at mm/slub.c:3877! RIP: 0010:kfree+0x14f/0x170 Call Trace: hfi1_free_ctxtdata+0x19a/0x2b0 [hfi1] ? hfi1_user_exp_rcv_grp_free+0x73/0x80 [hfi1] hfi1_file_close+0x20f/0x360 [hfi1] __fput+0xe7/0x210 ____fput+0xe/0x10 Fixes: Commit 62239fc6e554 ("IB/hfi1: Clean up on context initialization failure") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Initialize TID lists to avoid crash on cleanupMichael J. Ruhl2-4/+4
The expected receive lists (tid_xxx_list) are not initialized until late in the receive context initialization. If an error happens before the initialization, a NULL pointer access will occur during cleanup. Initialized the lists sooner rather than later to avoid this Oops: IP: unlock_exp_tids.isra.11+0x26/0xd0 [hfi1] RIP: 0010:unlock_exp_tids.isra.11+0x26/0xd0 [hfi1] Call Trace: hfi1_user_exp_rcv_free+0x79/0xb0 [hfi1] hfi1_file_close+0x87/0x360 [hfi1] __fput+0xe7/0x210 ____fput+0xe/0x10 Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/qib: Replace deprecated pci functions with new APIMichael J. Ruhl5-120/+98
pci_enable_msix_range() and pci_disable_msix() have been deprecated. Updating to the new pci_alloc_irq_vectors() interface. Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Add traces for TID operationsMike Marciniszyn3-14/+57
This patch adds a trace for putting a TID and for writing the RcvArray CSR. The CSR access template can be easily extended for additional CSR readq/writeq calls. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Use a template for tid reg/unregMike Marciniszyn1-33/+13
This is the preferred way to add a duplicate trace call. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Remove reading platform configuration from EFI variableJan Sokolowski1-10/+0
Currently, platform configuration can be read from EFI variable for discrete cards. It will happen when reading from EPROM fails. EFI variables should not be queried for platform configuration in any scenario. Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Create common expected receive verbs/PSM codeMike Marciniszyn7-184/+309
Declarations and code in common between verbs and PSM are now moved to exp_rcv.[ch]. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Set proper logging levels on QSFP cable error eventsJan Sokolowski1-32/+32
Change QSFP cable error events logging levels from info to error. Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Fix DC 8051 host info flag arrayBartlomiej Dudek1-2/+3
Fix info array of host message flags by adding entry for link width downgrade and reverse values for BC SMA and BC PWR_MSG messages Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Bartlomiej Dudek <bartlomiej.dudek@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1,qib: Do not send QKey trap for UD qpsDennis Dalessandro8-89/+54
According to IBTA spec a QKey violation should not result in a bad qkey trap being triggered for UD queue pairs. Also since it is a silent error we do not increment the q_key violation or the dropped packet counters. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Modify handling of physical link state by Host DriverByczkowski, Jakub6-41/+97
Ensure states returned to the Fabric Manager are consistent with the OPA specification by caching the physical state along with the logical state. Reviewed-by: Stuart Summers <john.s.summers@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrzej Kotlowski <andrzej.kotlowski@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/core: Allow QP state transition from reset to errorTadeusz Struk1-0/+1
Playing with IP-O-IB interface can trigger a warning message: "ib0: Failed to modify QP to ERROR state" to be logged. This happens when the QP is in IB_QPS_RESET state and the stack is trying to transition it to IB_QPS_ERR state in ipoib_ib_dev_stop(). According to the IB spec, Table 91 - "QP State Transition Properties" it looks like the transition from reset to error is valid: Transition: Any State to Error Required Attributes: None Optional Attributes: None allowed Actions: Queue processing is stopped. Work Requests pending or in process are completed in error, when possible. This patch allows the transition and quiets the message. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Add error checking for buffer overrun in OPA aggregateNeel Desai1-111/+185
Improve safety of code by checking the size of the data buffer and prevent buffer overrun Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Neel Desai <neel.desai@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Remove subtraction of uninitialized valueDennis Dalessandro1-1/+0
In process_receive_packet the packet header field is used to calculate the length of the packet. However this is not necessarily setup. In fact only if the ECN prescan is enabled will the packet header be valid at this point. The code works as is because we do not do anything with the packet length at this point in the packet processing. The length and header are setup correctly in hfi1_setup_ib_header which is called by the following sequence: process_receive_packet() -> rhf_receieve_function_map[]() --> process_receive_ib() ---> hfi1_setup_9B_packet() ----> hfi1_setup_ib_header() Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Use QPN mask to avoid overflowDennis Dalessandro1-1/+1
Ensure we can't come up with an array size that is bigger than the array by applying the QPN mask before the divide in the free_qpn function. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Fix spelling mistake in linkdown reasonDennis Dalessandro1-1/+1
Spell receive correctly in OPA_LINKDOWN_REASON_RCV_ERROR Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Ensure dd->gi_mask can not be overflowedDennis Dalessandro1-1/+6
As the code stands today the array access in remap_intr() is OK. To future proof the code though we should explicitly check to ensure the index value is not outside of the valid range. This is not a straight forward calculation so err on the side of caution. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/rdmavt: Remove duplicated functionsDennis Dalessandro1-23/+14
The free_qpn() function from the hfi1/qib driver which was the basis for rdmavt_free_qpn() function was accidentally left in the code. Remove it. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Fix up sdma_init function commentIra Weiny1-4/+2
sdma_init does not take a number of sdma engine parameters, rather it initializes all of the sdma engines. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Reclassify type of messages printed for platform config logicSebastian Sanchez1-10/+10
Reclassify messages printed out to /var/log/messages into warnings and errors to facilitate debugging in the future for issues related to the platform config logic. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Remove atomic SDMA_REQ_HAS_ERROR bit operationSebastian Sanchez1-15/+7
Atomic bit tests are used to single errors and the completion of request submissions. These operations don't need to be atomic and show to be expensive on the profile. Replace each atomic bit operation with a bool type and a READ_ONCE/WRITE_ONCE pairing. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Remove atomic SDMA_REQ_SEND_DONE bit operationSebastian Sanchez1-7/+7
The atomic SDMA_REQ_SEND_DONE bit is set by the process-level code, and then the same process-level code uses the bit to test that all packets have been submitted incurring a costly atomic read. Use a bool type with a READ_ONCE/WRITE_ONCE pairing for this bit, and use the same condition that is used to set the bit to test that all packets have been submitted. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/core,rdmavt,hfi1,opa-vnic: Send OPA cap_mask3 in trapVishwanathapura, Niranjana5-10/+41
Provide the ability for IB clients to modify the OPA specific capability mask and include this mask in the subsequent trap data. Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Michael N. Henry <michael.n.henry@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Replace deprecated pci functions with new APIMichael J. Ruhl4-131/+78
pci_enable_msix_range() and pci_disable_msix() have been deprecated. Updating to the new pci_alloc_irq_vectors() interface. Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Name function prototype parameters for affinity moduleMichael J. Ruhl1-6/+8
To improve the readability of function prototypes, give the parameters names in the affinity module. Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Optimize cachelines for user SDMA request structureSebastian Sanchez1-48/+58
The current user SDMA request structure layout has holes. The cachelines can be reduced to improve cacheline trading. Separate fields in the following categories: mostly read, writable and shared with interrupt. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Don't remove RB entry when not needed.Sebastian Sanchez3-12/+28
An RB tree is used for the SDMA pinning cache. Cache entries are extracted and reinserted from the tree in case the address range for it changes. However, if the address range for the entry doesn't change, deleting the entry from the RB tree is not necessary. This affects performance since the tree needs to be rebalanced for each insertion, and this happens in the hot path. Optimize RB search by not removing entries when it's not needed. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/rdmavt: Compress adjacent SGEs in rvt_lkey_ok()Mike Marciniszyn6-23/+128
SGEs that are contiguous needlessly consume driver dependent TX resources. The lkey validation logic is enhanced to compress the SGE that ends up in the send wqe when consecutive addresses are detected. The lkey validation API used to return 1 (success) or 0 (fail). The return value is now an -errno, 0 (compressed), or 1 (uncompressed). A additional argument is added to pass the last SQE for the compression. Loopback callers always pass a NULL to last_sge since the optimization is of little benefit in that situation. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Setup common IB fields in hfi1_packet structDon Hiatt11-210/+235
We move many common IB fields into the hfi1_packet structure and set them up in a single function. This allows us to set the fields in a single place and not deal with them throughout the driver. Reviewed-by: Brian Welty <brian.welty@intel.com> Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Separate input/output header tracingDon Hiatt6-169/+279
Calls to trace incoming packets will now receive the packet context as parameter. This enables trace support for future packet types. Header trace output is in the format <field>:<value> which makes parsing easier. input_ibhdr trace before change: <idle>-0 [001] d.h. 5904.250925: input_ibhdr: [0000:05:00.0] vl 0 lver 0 sl 0 lnh 2,LRH_BTH dlid 0002 len 18 slid 0001 op 0x64,UD_SEND_ONLY se 0 m 0 pad 0 tver 0 pkey 0xffff f 0 b 0 qpn 0x000001 a 0 psn 0x000001b2 deth qkey 0x80010000 sqpn 0x000001 input_ibhdr trace after change: <idle>-0 [001] d.h. 6655.714488: input_ibhdr: [0000:05:00.0] (IB) len:124 sc:0 dlid:0x0001 slid:0x0002 lnh:2,LRH_BTH lver:0 sl:0 age:0 becn:0 fecn:0 l4:0 rc:0 entropy:0 op:0x64,UD_SEND_ONLY se:0 m:0 pad:0 tver:0 pkey:0x7fff f:0 b:0 qpn:0x000001 a:0 psn:0x00000036 hlen:8 deth qkey:0x80010000 sqpn:0x000001 Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Add functions to parse BTH/IB headersDon Hiatt5-14/+14
Improve code readablity by adding inline functions to read specific BTH/IB fields without knowledge of byte offsets. Reviewed-by: Brian Welty <brian.welty@intel.com> Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Remove unused mk_qpn functionIra Weiny1-6/+0
Leftover function that is not used. Remove it. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Remove unnecessary initialization from tx requestSebastian Sanchez1-1/+11
The tx request is unnecessarily initialized in the hot code path with memset(), however, there's no need to do this as most fields are initialized later on. this initialization shows to be costly in the profile. Remove unnecessary initialization from tx request and make sure all variables are initialized properly. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27Merge branch 'k.o/for-4.12-rc' into k.o/for-4.13-mlx-sharedDoug Ledford20-814/+932
2017-06-27IB/mlx5: Respect mlx5_core reserved GIDsIlan Tayari1-66/+53
Reserved gids are taken by the mlx5_core, report smaller GID table size to IB core. Set mlx5_query_roce_port's return value back to int. In case of error, return an indication. This rolls back some of the change in commit 50f22fd8ecf9 ("IB/mlx5: Set mlx5_query_roce_port's return value to void") Change set_roce_addr to use gid_set function, instead of directly sending the command. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.changelinkMatthias Schiffer1-3/+4
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.newlinkMatthias Schiffer1-1/+2
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller20-814/+932
Two entries being added at the same time to the IFLA policy table, whilst parallel bug fixes to decnet routing dst handling overlapping with the dst gc removal in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-21qed*: Rename qed_roce_if.h to qed_rdma_if.hKalderon, Michal2-2/+2
Rename the qed_roce_if file to qed_rdma_if as it represents a common interface for RoCE and iWARP. this commit affects RDMA/qedr as well. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20net: introduce __skb_put_[zero, data, u8]yuan linyu4-14/+7
follow Johannes Berg, semantic patch file as below, @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = __skb_put(skb, len); +p = __skb_put_zero(skb, len); | -p = (t)__skb_put(skb, len); +p = __skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ identifier p; expression len; expression skb; type t; @@ ( -t p = __skb_put(skb, len); +t p = __skb_put_zero(skb, len); ) ... when != p ( -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = __skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); | -p = (t *)__skb_put(skb, sizeof(t)); +p = __skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(__skb_put(skb, len), 0, len); +__skb_put_zero(skb, len); @@ expression skb, len, data; @@ -memcpy(__skb_put(skb, len), data, len); +__skb_put_data(skb, data, len); @@ expression SKB, C, S; typedef u8; identifier fn = {__skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20qed*: Set rdma generic functions prefixMichal Kalderon1-3/+3
Rename the functions common to both iWARP and RoCE to have a prefix of _rdma_ instead of _roce_. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20qed*: qede_roce.[ch] -> qede_rdma.[ch]Michal Kalderon2-2/+2
Once we have iWARP support, the qede portion of the qedr<->qede would serve all the RDMA protocols - so rename the file to be appropriate to its function. While we're at it, we're also moving a couple of inclusions to it into .h files and adding includes to make sure it contains all type definitions it requires. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20qed: Chain support for external PBLMintz, Yuval2-4/+4
iWARP would require the chains to allocate/free their PBL memory independently, so add the infrastructure to provide it externally. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar1-1/+1
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-16Merge tag 'mlx5-updates-2017-06-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller1-1/+1
Saeed Mahameed says: ==================== Mellanox mlx5 updates and cleanups 2017-06-16 mlx5-updates-2017-06-16 This series provide some updates and cleanups for mlx5 core and netdevice driver. From Eli Cohen, add a missing event string. From Or Gerlitz, some checkpatch cleanups. From Moni, Disalbe HW level LAG when SRIOV is enabled. From Tariq, A code reuse cleanup in aRFS flow. From Itay Aveksis, Typo fix. From Gal Pressman, ethtool statistics updates and "update stats" deferred work optimizations. From Majd Dibbiny, Fast unload support on kernel shutdown. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg5-8/+8
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg8-37/+31
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg4-16/+8
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds20-814/+932
Pull rdma fixes from Doug Ledford: "I had thought at the time of the last pull request that there wouldn't be much more to go, but several things just kept trickling in over the last week. Instead of just the six patches to bnxt_re that I had anticipated, there are another five IPoIB patches, two qedr patches, and a few other miscellaneous patches. The bnxt_re patches are more lines of diff than I like to submit this late in the game. That's mostly because of the first two patches in the series of six. I almost dropped them just because of the lines of churn, but on a close review, a lot of the churn came from removing duplicated code sections and consolidating them into callable routines. I felt like this made the number of lines of change more acceptable, and they address problems, so I left them. The remainder of the patches are all small, well contained, and well understood. These have passed 0day testing, but have not been submitted to linux-next (but a local merge test with your current master was without any conflicts). Summary: - A fix for fix eea40b8f624 ("infiniband: call ipv6 route lookup via the stub interface") - Six patches against bnxt_re...the first two are considerably larger than I would like, but as they address real issues I went ahead and submitted them (it also helped that a good deal of the churn was removing code repeated in multiple places and consolidating it to one common function) - Two fixes against qedr that just came in - One fix against rxe that took a few revisions to get right plus time to get the proper reviews - Five late breaking IPoIB fixes - One late cxgb4 fix" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: rdma/cxgb4: Fix memory leaks during module exit IB/ipoib: Fix memory leak in create child syscall IB/ipoib: Fix access to un-initialized napi struct IB/ipoib: Delete napi in device uninit default IB/ipoib: Limit call to free rdma_netdev for capable devices IB/ipoib: Fix memory leaks for child interfaces priv rxe: Fix a sleep-in-atomic bug in post_one_send RDMA/qedr: Add 64KB PAGE_SIZE support to user-space queues RDMA/qedr: Initialize byte_len in WC of READ and SEND commands RDMA/bnxt_re: Remove FMR support RDMA/bnxt_re: Fix RQE posting logic RDMA/bnxt_re: Add HW workaround for avoiding stall for UD QPs RDMA/bnxt_re: Dereg MR in FW before freeing the fast_reg_page_list RDMA/bnxt_re: HW workarounds for handling specific conditions RDMA/bnxt_re: Fixing the Control path command and response handling IB/addr: Fix setting source address in addr6_resolve()
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.