aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/input.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-12Input: synaptics-rmi4 - clear IRQ enables for F54Lucas Stach1-1/+1
The driver for F54 just polls the status and doesn't even have a IRQ handler registered. Make sure to disable all F54 IRQs, so we don't crash the kernel on a nonexistent handler. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20191105114402.6009-1-l.stach@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-11-04Input: synaptics-rmi4 - remove unused result_bits maskAndrew Duggan1-4/+1
The result_bits mask is no longer used by the driver and should be removed. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Link: https://lore.kernel.org/r/20191025002527.3189-4-aduggan@synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-11-04Input: synaptics-rmi4 - do not consume more data than we have (F11, F12)Andrew Duggan2-4/+4
Currently, rmi_f11_attention() and rmi_f12_attention() functions update the attn_data data pointer and size based on the size of the expected size of the attention data. However, if the actual valid data in the attn buffer is less then the expected value then the updated data pointer will point to memory beyond the end of the attn buffer. Using the calculated valid_bytes instead will prevent this from happening. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191025002527.3189-3-aduggan@synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-11-04Input: synaptics-rmi4 - disable the relative position IRQ in the F12 driverAndrew Duggan1-2/+26
This patch fixes an issue seen on HID touchpads which report finger positions using RMI4 Function 12. The issue manifests itself as spurious button presses as described in: https://www.spinics.net/lists/linux-input/msg58618.html Commit 24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain") switched the RMI4 driver to using an irq_domain to handle RMI4 function interrupts. Functions with more then one interrupt now have each interrupt mapped to their own IRQ and IRQ handler. The result of this change is that the F12 IRQ handler was now getting called twice. Once for the absolute data interrupt and once for the relative data interrupt. For HID devices, calling rmi_f12_attention() a second time causes the attn_data data pointer and size to be set incorrectly. When the touchpad button is pressed, F30 will generate an interrupt and attempt to read the F30 data from the invalid attn_data data pointer and report incorrect button events. This patch disables the F12 relative interrupt which prevents rmi_f12_attention() from being called twice. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reported-by: Simon Wood <simon@mungewell.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191025002527.3189-2-aduggan@synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-11-04Input: synaptics-rmi4 - fix video buffer sizeLucas Stach1-1/+1
The video buffer used by the queue is a vb2_v4l2_buffer, not a plain vb2_buffer. Using the wrong type causes the allocation of the buffer storage to be too small, causing a out of bounds write when __init_vb2_v4l2_buffer initializes the buffer. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191104114454.10500-1-l.stach@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-21Input: st1232 - fix reporting multitouch coordinatesDixit Parmar1-2/+4
For Sitronix st1633 multi-touch controller driver the coordinates reported for multiple fingers were wrong, as it was always taking LSB of coordinates from the first contact data. Signed-off-by: Dixit Parmar <dixitparmar19@gmail.com> Reviewed-by: Martin Kepplinger <martink@posteo.de> Cc: stable@vger.kernel.org Fixes: 351e0592bfea ("Input: st1232 - add support for st1633") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204561 Link: https://lore.kernel.org/r/1566209314-21767-1-git-send-email-dixitparmar19@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-15Revert "Input: elantech - enable SMBus on new (2018+) systems"Kai-Heng Feng1-26/+29
This reverts commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c. Apparently use dmi_get_bios_year() as manufacturing date isn't accurate and this breaks older laptops with new BIOS update. So let's revert this patch. There are still new HP laptops still need to use SMBus to support all features, but it'll be enabled via a whitelist. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191001070845.9720-1-kai.heng.feng@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-11Input: synaptics-rmi4 - avoid processing unknown IRQsEvan Green1-1/+5
rmi_process_interrupt_requests() calls handle_nested_irq() for each interrupt status bit it finds. If the irq domain mapping for this bit had not yet been set up, then it ends up calling handle_nested_irq(0), which causes a NULL pointer dereference. There's already code that masks the irq_status bits coming out of the hardware with current_irq_mask, presumably to avoid this situation. However current_irq_mask seems to more reflect the actual mask set in the hardware rather than the IRQs software has set up and registered for. For example, in rmi_driver_reset_handler(), the current_irq_mask is initialized based on what is read from the hardware. If the reset value of this mask enables IRQs that Linux has not set up yet, then we end up in this situation. There appears to be a third unused bitmask that used to serve this purpose, fn_irq_bits. Use that bitmask instead of current_irq_mask to avoid calling handle_nested_irq() on IRQs that have not yet been set up. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Link: https://lore.kernel.org/r/20191008223657.163366-1-evgreen@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-08Input: soc_button_array - partial revert of support for newer surface devicesHans de Goede1-5/+12
Commit c394159310d0 ("Input: soc_button_array - add support for newer surface devices") not only added support for the MSHW0040 ACPI HID, but for some reason it also makes changes to the error handling of the soc_button_lookup_gpio() call in soc_button_device_create(). Note ideally this seamingly unrelated change would have been made in a separate commit, with a message explaining the what and why of this change. I guess this change may have been added to deal with -EPROBE_DEFER errors, but in case of the existing support for PNP0C40 devices, treating -EPROBE_DEFER as any other error is deliberate, see the comment this commit adds for why. The actual returning of -EPROBE_DEFER to the caller of soc_button_probe() introduced by the new error checking causes a serious regression: On devices with so called virtual GPIOs soc_button_lookup_gpio() will always return -EPROBE_DEFER for these fake GPIOs, when this happens during the second call of soc_button_device_create() we already have successfully registered our first child. This causes the kernel to think we are making progress with probing things even though we unregister the child before again before we return the -EPROBE_DEFER. Since we are making progress the kernel will retry deferred-probes again immediately ending up stuck in a loop with the following showing in dmesg: [ 124.022697] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6537 [ 124.040764] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6538 [ 124.056967] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6539 [ 124.072143] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6540 [ 124.092373] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6541 [ 124.108065] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6542 [ 124.128483] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6543 [ 124.147141] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6544 [ 124.165070] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6545 [ 124.179775] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6546 [ 124.202726] input: gpio-keys as /devices/platform/INTCFD9:00/gpio-keys.0.auto/input/input6547 <continues on and on and on> And 1 CPU core being stuck at 100% and udev hanging since it is waiting for the modprobe of soc_button_array to return. This patch reverts the soc_button_lookup_gpio() error handling changes, fixing this regression. Fixes: c394159310d0 ("Input: soc_button_array - add support for newer surface devices") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205031 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20191005105551.353273-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-02Input: goodix - add support for 9-bytes reportsYauhen Kharuzhy1-8/+50
Some variants of Goodix touchscreen firmwares use 9-bytes finger report format instead of common 8-bytes format. This report format may be present as: struct goodix_contact_data { uint8_t unknown1; uint8_t track_id; uint8_t unknown2; uint16_t x; uint16_t y; uint16_t w; }__attribute__((packed)); Add support for such format and use it for Lenovo Yoga Book notebook (which uses a Goodix touchpad as a touch keyboard). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-02Input: da9063 - fix capability and drop KEY_SLEEPMarco Felsch1-4/+1
Since commit f889beaaab1c ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press") KEY_SLEEP isn't supported anymore. This caused input device to not generate any events if "dlg,disable-key-power" is set. Fix this by unconditionally setting KEY_POWER capability, and not declaring KEY_SLEEP. Fixes: f889beaaab1c ("Input: da9063 - report KEY_POWER instead of KEY_SLEEP during power key-press") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-06Input: elan_i2c - remove Lenovo Legion Y7000 PnpIDBenjamin Tissoires1-1/+1
Looks like the Bios of the Lenovo Legion Y7000 is using ELAN061B when the actual device is supposed to be used with hid-multitouch. Remove it from the list of the supported device, hoping that no one will complain about the loss in functionality. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203467 Fixes: 738c06d0e456 ("Input: elan_i2c - add hardware ID for multiple Lenovo laptops") Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-05Input: sidewinder - make array seq static const, makes object smallerColin Ian King1-1/+1
Don't populate the array seq on the stack but instead make it static const. Makes the object code smaller by 30 bytes. Before: text data bss dec hex filename 22284 3184 0 25468 637c drivers/input/joystick/sidewinder.o After: text data bss dec hex filename 22158 3280 0 25438 635e drivers/input/joystick/sidewinder.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-05Input: reset device timestamp on syncDmitry Torokhov1-0/+7
We need to reset input device's timestamp on input_sync(), otherwise drivers not using input_set_timestamp() will end up with a stale timestamp after their clients consume first input event. Fixes: 3b51c44bd693 ("Input: allow drivers specify timestamp for input events") Reported-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-02Input: bu21013_ts - switch to using standard touchscreen propertiesDmitry Torokhov2-24/+46
This switches the driver over to the standard touchscreen properties for coordinate transformation, while keeping old bindings working as well. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-02Input: bu21013_ts - switch to using MT-B (slotted) protocolDmitry Torokhov1-37/+43
MT-B protocol is more efficient and everyone expects it. We use in-kernel tracking to identify contacts. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-02Input: bu21013_ts - fix suspend when wake sourceDmitry Torokhov1-24/+24
If the touchscreen is configured as wakeup source we should not be cutting off power to it. Also, now that the driver relies on I2C client to supply IRQ, we do not need to explicitly enable and disable IRQ for wakeup: if device is created as wakeup source, I2C core will mark interrupt as wakeup one. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-02Input: bu21013_ts - use interrupt from I2C clientDmitry Torokhov2-17/+24
Instead of trying to map INT GPIO to interrupt, let's use one supplied by I2C client. If there is none - bail. This will also allow us to treat INT GPIO as optional, as per the binding. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-02Input: bu21013_ts - remove support for platform dataDmitry Torokhov2-102/+37
There are no current users of the platform data in the tree, and any new users should either use device tree, or static device properties to describe the device. This change drop the platform data definition and handling and moves the driver over to generic device properties API. We also drop support for the external clock. If it is needed we will have to extend the bindings to supply the clock reference and handle it properly in the driver. Also, wakeup setting should be coming from I2C client. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-02Input: bu21013_ts - convert to using managed resourcesDmitry Torokhov1-98/+84
This allows trimming error unwinding and device removal handling. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-02Input: bu21013_ts - remove useless commentsDmitry Torokhov1-59/+2
The comments for individual functions in the driver do not provide any additional information beyond what function names indicate. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-02Input: bu21013_ts - annotate supend/resume methods as __maybe_unusedDmitry Torokhov1-10/+3
Instead if #ifdef-ing out suspend and resume methods, let's mark them as __maybe_unused to get better compile time coverage. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-02Input: bu21013_ts - rename some variablesDmitry Torokhov1-186/+190
"bu21013_data" and "struct bu21013_ts_data" are a tad long, let's call them "ts" and "struct bu21013_ts". Also rename retval to error in bu21013_init_chip() and adjust formatting; i2c_smbus_write_byte_data() returns negative on error and 0 on success, so we simply test if whether erro is 0 or not. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-02Input: bu21013_ts - convert to use GPIO descriptorsLinus Walleij3-54/+41
This driver can use GPIO descriptors rather than GPIO numbers without any problems, convert it. Name the field variables after the actual pins on the chip rather than the "reset" and "touch" names from the devicetree bindings that are vaguely inaccurate. No in-tree users pass GPIO numbers in platform data so drop this. Descriptor tables can be used to get these GPIOs from a board file if need be. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-09-02ARM: ux500: improve BU21013 touchpad bindingsDmitry Torokhov2-8/+20
In preparation to update to bu21013_tp driver properly annotate GPIOs property (the INT GPIOs are active low, not open drain), and also define interrupt lines so we do not have to have special conversion in the driver. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-29Input: i8042 - enable wakeup on a stable struct deviceStephen Boyd1-11/+14
We don't know when the device will be added with device_add() in serio_add_port() because serio_add_port() is called from a workqueue that this driver schedules by calling serio_register_port(). The best we can know is that the device will definitely not have been added yet when the start callback is called on the serio device. While it hasn't been shown to be a problem, proactively move the wakeup enabling calls to the start hook so that we don't race with the workqueue calling device_add(). This will avoid racy situations where code tries to add wakeup sysfs attributes for this device from dpm_sysfs_add() but the path in device_set_wakeup_capable() has already done so. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-20Input: soc_button_array - use platform_device_register_resndata()Enrico Weigelt1-14/+8
The registration of gpio-keys device can be written much shorter by using the platform_device_register_resndata() helper. Signed-off-by: Enrico Weigelt <info@metux.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-20Input: psmouse - drop all unneeded functions from mouse headersHui Wang11-114/+8
Recently we had a building error if we enable the MOUSE_PS2_ALPS while disable the MOUSE_PS2_TRACKPOINT, and was fixed by 49e6979e7e92 ("Input: psmouse - fix build error of multiple definition"). We could improve that fix by dropping all unneeded functions and CONFIG_MOUSE_ guards from the header, it is safe to do that since those functions are not directly called by psmouse-base.c anymore. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-20Input: add support for polling to input devicesDmitry Torokhov5-8/+273
Separating "normal" and "polled" input devices was a mistake, as often we want to allow the very same device work on both interrupt-driven and polled mode, depending on the board on which the device is used. This introduces new APIs: - input_setup_polling - input_set_poll_interval - input_set_min_poll_interval - input_set_max_poll_interval These new APIs allow switching an input device into polled mode with sysfs attributes matching drivers using input_polled_dev APIs that will be eventually removed. Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-20Input: wacom_w8001 - allocate additional space for 'phys'Jason Gerecke1-1/+3
GCC warns that the output of our call to 'snprintf' in 'w8001_connect' may be truncated since both 'serio->phys' and 'w8001->phys' are 32 bytes in length. Increase the amount of space allocated for the latter to compensate. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-16Input: cros_ec_keyb - add back missing mask for event_typeFei Shao1-2/+4
In the previous patch we didn't mask out event_type in case statement, so switches are always picked instead of buttons, which results in ChromeOS devices misbehaving when power button is pressed. This patch adds back the missing mask. Fixes: d096aa3eb604 ("Input: cros_ec_keyb: mask out extra flags in event_type") Signed-off-by: Fei Shao <fshao@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-14Input: remove dev_err() usage after platform_get_irq()Stephen Boyd37-142/+44
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-12Input: applespi - no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-24/+6
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-12Input: edt-ft5x06 - no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-2/+0
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-12Input: matrix-keymap - switch to use device_property_count_u32()Andy Shevchenko1-1/+1
Use use device_property_count_u32() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-12Input: atmel_mxt_ts - switch to use device_property_count_u32()Andy Shevchenko1-2/+1
Use use device_property_count_u32() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-12Input: hideep - switch to use device_property_count_u32()Andy Shevchenko1-2/+1
Use use device_property_count_u32() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-12Input: mpr121 - switch to use device_property_count_u32()Andy Shevchenko1-2/+1
Use use device_property_count_u32() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-12Input: axp20x-pek - convert driver to use dev_groupsGreg Kroah-Hartman1-12/+3
Drivers now have the option to have the driver core create and remove any needed sysfs attribute files. So take advantage of that and do not register "by hand" a sysfs group of attributes. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-12Input: gpio_keys - convert driver to use dev_groupsGreg Kroah-Hartman1-11/+2
Drivers now have the option to have the driver core create and remove any needed sysfs attribute files. So take advantage of that and do not register "by hand" a bunch of sysfs files. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-08-11Linux 5.3-rc4Linus Torvalds1-1/+1
2019-08-10Makefile: Convert -Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough for clangJoe Perches2-2/+2
A compilation -Wimplicit-fallthrough warning was enabled by commit a035d552a93b ("Makefile: Globally enable fall-through warning") Even though clang 10.0.0 does not currently support this warning without a patch, clang currently does not support a value for this option. Link: https://bugs.llvm.org/show_bug.cgi?id=39382 The gcc default for this warning is 3 so removing the =3 has no effect for gcc and enables the warning for patched versions of clang. Also remove the =3 from an existing use in a parisc Makefile: arch/parisc/math-emu/Makefile Signed-off-by: Joe Perches <joe@perches.com> Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-09ARM: ep93xx: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: arm-ep93xx_defconfig arm): arch/arm/mach-ep93xx/crunch.c: In function 'crunch_do': arch/arm/mach-ep93xx/crunch.c:46:3: warning: this statement may fall through [-Wimplicit-fallthrough=] memset(crunch_state, 0, sizeof(*crunch_state)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-ep93xx/crunch.c:53:2: note: here case THREAD_NOTIFY_EXIT: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09scsi: fas216: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+8
Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: rpc_defconfig arm): drivers/scsi/arm/fas216.c: In function ‘fas216_disconnect_intr’: drivers/scsi/arm/fas216.c:913:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) { ^ drivers/scsi/arm/fas216.c:919:2: note: here default: /* huh? */ ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_kick’: drivers/scsi/arm/fas216.c:1959:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_allocate_tag(info, SCpnt); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1960:2: note: here case TYPE_OTHER: ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_busservice_intr’: drivers/scsi/arm/fas216.c:1413:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1414:2: note: here case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */ ^~~~ drivers/scsi/arm/fas216.c:1424:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1425:2: note: here case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */ ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_funcdone_intr’: drivers/scsi/arm/fas216.c:1573:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((stat & STAT_BUSMASK) == STAT_MESGIN) { ^ drivers/scsi/arm/fas216.c:1579:2: note: here default: ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_handlesync’: drivers/scsi/arm/fas216.c:605:20: warning: this statement may fall through [-Wimplicit-fallthrough=] info->scsi.phase = PHASE_MSGOUT_EXPECT; ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:607:2: note: here case async: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09pcmcia: db1xxx_ss: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+4
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: db1xxx_defconfig mips): drivers/pcmcia/db1xxx_ss.c:257:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/pcmcia/db1xxx_ss.c:269:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09video: fbdev: omapfb_main: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+8
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: omap1_defconfig arm): drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/watchdog/ar7_wdt.c:237:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:449:23: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1549:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1547:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1545:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1543:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1540:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1538:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1535:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09watchdog: riowd: Mark expected switch fall-throughGustavo A. R. Silva1-1/+1
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: sparc64): drivers/watchdog/riowd.c: In function ‘riowd_ioctl’: drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=] riowd_writereg(p, riowd_timeout, WDTO_INDEX); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/watchdog/riowd.c:139:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09s390/net: Mark expected switch fall-throughsGustavo A. R. Silva3-1/+5
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: s390): drivers/s390/net/ctcm_fsms.c: In function ‘ctcmpc_chx_attnbusy’: drivers/s390/net/ctcm_fsms.c:1703:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (grp->changed_side == 1) { ^ drivers/s390/net/ctcm_fsms.c:1707:2: note: here case MPCG_STATE_XID0IOWAIX: ^~~~ drivers/s390/net/ctcm_mpc.c: In function ‘ctc_mpc_alloc_channel’: drivers/s390/net/ctcm_mpc.c:358:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (callback) ^ drivers/s390/net/ctcm_mpc.c:360:2: note: here case MPCG_STATE_XID0IOWAIT: ^~~~ drivers/s390/net/ctcm_mpc.c: In function ‘mpc_action_timeout’: drivers/s390/net/ctcm_mpc.c:1469:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((fsm_getstate(rch->fsm) == CH_XID0_PENDING) && ^ drivers/s390/net/ctcm_mpc.c:1472:2: note: here default: ^~~~~~~ drivers/s390/net/ctcm_mpc.c: In function ‘mpc_send_qllc_discontact’: drivers/s390/net/ctcm_mpc.c:2087:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (grp->estconnfunc) { ^ drivers/s390/net/ctcm_mpc.c:2092:2: note: here case MPCG_STATE_FLOWC: ^~~~ drivers/s390/net/qeth_l2_main.c: In function ‘qeth_l2_process_inbound_buffer’: drivers/s390/net/qeth_l2_main.c:328:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (IS_OSN(card)) { ^ drivers/s390/net/qeth_l2_main.c:337:3: note: here default: ^~~~~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09crypto: ux500/crypt: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+6
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_save_device_context’: drivers/crypto/ux500/cryp/cryp.c:316:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_4_r = readl_relaxed(&src_reg->key_4_r); drivers/crypto/ux500/cryp/cryp.c:318:2: note: here case CRYP_KEY_SIZE_192: ^~~~ drivers/crypto/ux500/cryp/cryp.c:320:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_3_r = readl_relaxed(&src_reg->key_3_r); drivers/crypto/ux500/cryp/cryp.c:322:2: note: here case CRYP_KEY_SIZE_128: ^~~~ drivers/crypto/ux500/cryp/cryp.c:324:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_2_r = readl_relaxed(&src_reg->key_2_r); drivers/crypto/ux500/cryp/cryp.c:326:2: note: here default: ^~~~~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_restore_device_context’: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:363:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_4_r, &reg->key_4_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:365:2: note: here case CRYP_KEY_SIZE_192: ^~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:367:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_3_r, &reg->key_3_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:369:2: note: here case CRYP_KEY_SIZE_128: ^~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:371:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_2_r, &reg->key_2_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:373:2: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09watchdog: wdt977: Mark expected switch fall-throughGustavo A. R. Silva1-1/+1
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’: LD [M] drivers/media/platform/vicodec/vicodec.o drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=] wdt977_keepalive(); ^~~~~~~~~~~~~~~~~~ drivers/watchdog/wdt977.c:403:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.