aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/keyboard/adp5589-keys.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-03-30input: adp5589-keys: use gpiochip data pointerLinus Walleij1-6/+6
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-09Input: adp5589 - fix row 5 handling for adp5589Lars-Peter Clausen1-3/+4
The adp5589 has row 5, don't skip it when creating the GPIO mapping. Otherwise the pin gets reserved as used and it is not possible to use it as a GPIO. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-17Input: drop owner assignment from i2c_driverKrzysztof Kozlowski1-1/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-06Input: adp5589-keys - fix event count maskGuido Martínez1-1/+1
The event mask was specified as 0xF (4 bits) when in reality is 0x1F (5 bits) in order to be capable of representing all FIFO length values from 0 to 16. This caused a problem: when the keypad reported 16 pending events the driver took it as 0, and did nothing. This in turn caused the keypad to re-issue the interrupt over and over again. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-06Input: adp5589-keys - fix pull mask settingGuido Martínez1-2/+2
The pull mask is created by looping each row (column) and building an 8-bit integer with the configuration. It is written byte-by-byte, when we reach the end of the rows (columns) or we're at the 3rd line (which finishes the first byte, since each pin is 2bits on the mask). However, this only works if we have at most 8 pins (2 bytes), which is not the case for the ADP5589. So, write the byte at each boundary (every 4 rows/columns). Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-18driver:gpio remove all usage of gpio_remove retval in driverabdoulaye berthe1-3/+1
this remove all reference to gpio_remove retval in all driver except pinctrl and gpio. the same thing is done for gpio and pinctrl in two different patches. Signed-off-by: Abdoulaye Berthe <berthe.ab@gmail.com> Acked-by: Michael Büsch <m@bues.ch> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-06Input: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-16Merge tag 'v3.13-rc4' into nextDmitry Torokhov1-1/+2
Synchronize with mainline to bring in the new keycode definitions and new hwmon API.
2013-12-06Input: use dev_get_platdata()Jingoo Han1-4/+4
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-25Input: keyboard - "keycode & KEY_MAX" changes some keycode valuesAndrew Liu1-1/+2
For exmaple, keycode: KEY_OK(0x160) is changed by "and" operation with KEY_MAX(0x2ff) to KEY_KPENTER(96). Signed-off-by: Andrew Liu <andrew.liu200917@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexitBill Pemberton1-2/+2
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitBill Pemberton1-8/+7
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-03-16Input: convert I2C drivers to use module_i2c_driver()Axel Lin1-11/+1
This patch converts the drivers in drivers/input/* to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-18Input: adp5589-keys - add support for the ADP5585 derivativesMichael Hennerich1-127/+482
The ADP5585 family keypad decoder and IO expander is similar to the ADP5589, however it features less IO pins, and lacks hardware assisted key-lock functionality. Unfortunately the register addresses are different, as well as the event codes and bit organization within the port related registers. Move ADP5589 Register defines from the header file into the main source file. Add new defines while making sure we don't break existing platform_data. Add register address translation, and turn device specific defines into variables. Introduce some helper functions and disable functions that doesn't exist on the added devices. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-27Input: remove unneeded version.h includesJesper Juhl1-1/+0
It was pointed out by 'make versioncheck' that some includes of linux/version.h are not needed in drivers/input/. This patch removes them. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-19Input: ADP5589 - new driver for I2C Keypad Decoder and I/O ExpanderMichael Hennerich1-0/+771
From http://www.analog.com/ADP5589: The ADP5589 is an I/O port expander and keypad matrix decoder designed for QWERTY type phones that require a large keypad matrix and expanded I/O lines. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.