aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/keyboard (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-01-31Input: tca8418 - switch to using generic device propertiesDmitry Torokhov1-64/+26
Let's drop legacy platform data support (there are no users in mainline) and switch to using generic device properties, which will make the driver simpler (non-OF boards can use property sets to describe hardware). Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-31Input: matrix-keypad - switch to using generic device propertiesDmitry Torokhov10-13/+14
Instead of being OF-specific, let's switch to using generic device properties, which will make this code usable on ACPI, device tree and legacy boards that use property sets. As part of the change let's rename matrix_keypad_parse_of_params() to matrix_keypad_parse_properties(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-26gpio: Pass GPIO label down to gpiod_requestAlexander Stein2-2/+4
Currently all users of fwnode_get_named_gpiod() have no way to specify a label for the GPIO. So GPIOs listed in debugfs are shown with label "?". With this change a proper label is used. Also adjust all users so they can pass a label, properly retrieved from device tree properties. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpiolib: Convert fwnode_get_named_gpiod() to configure GPIOAndy Shevchenko2-17/+3
Make fwnode_get_named_gpiod() consistent with the rest of gpiod_get() like API, i.e. configure GPIO pin immediately after request. Besides obvious clean up it will help to configure pins based on firmware provided resources. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-24Merge tag 'v4.10-rc5' into nextDmitry Torokhov1-104/+31
Sync up with mainline to bring up improvements in various subsystems.
2017-01-22Input: keyboard - drop unnecessary calls to input_set_drvdataGuenter Roeck6-11/+0
If there is no call to dev_get_drvdata() or input_get_drvdata(), the call to input_set_drvdata() is unnecessary and can be dropped. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: keyboard - drop unnecessary calls to device_init_wakeupGuenter Roeck5-11/+0
Calling device_init_wakeup in the remove function is unnecessary since the device is going away, and thus won't be able to cause any wakeups under any circumstances. Besides, the driver cleanup code already handles the necessary cleanup. Similarly, disabling wakeup in the probe error path is unnecessary, as is disabling wakeup in the probe function in the first place. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: keyboard - use local variables consistentlyGuenter Roeck4-27/+25
If a function declares a variable to access a structure element, use it consistently. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: keyboard - drop calls to platform_set_drvdata and i2c_set_clientdataGuenter Roeck8-12/+0
There is no call to i2c_get_clientdata(), platform_get_drvdata(), or dev_get_drvdata() in any of the drivers in this patch. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: gpio-keys - add support for setkeycodeHans de Goede1-12/+28
gpio-keys input devices created by the soc_button_array driver are configured with key-codes based on ACPI provided information. Unfortunately on some tablets this info is wrong, and we need to have a quirk to fix things up. Add support for input_setkeycode to the gpio-keys driver, so that the existing udev hwdb mechanism can be used to fix things up on these tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: tm2-touchkey - add touchkey driver support for TM2Jaechul Lee3-0/+298
This patch adds support for the TM2 touch key and led functionality. The driver interfaces with userspace through an input device and reports KEY_PHONE and KEY_BACK event types. LED brightness can be controlled by "/sys/class/leds/tm2-touchkey/brightness". Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: bcm-keypad - drop unnecessary call to platform_set_drvdataGuenter Roeck1-2/+0
There is no call to platform_get_drvdata() or dev_get_drvdata(). Drop the unnecessary call to platform_set_drvdata(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: twl4030_keypad - drop unnecessary call to platform_set_drvdataGuenter Roeck1-1/+0
There is no call to platform_get_drvdata() or dev_get_drvdata(). Drop the unnecessary call to platform_set_drvdata(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: cros_ec_keyb - drop unnecessary call to dev_set_drvdata and other changesGuenter Roeck1-2/+1
There is no call to platform_get_drvdata() or dev_get_drvdata(). Drop the unnecessary call to dev_set_drvdata(). Other relevant changes: Use existing variable 'dev' instead of dereferencing it several times This conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop dev_set_drvdata() - Use local variable 'struct device *dev' consistently Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-17Input: tca8418 - use the interrupt trigger from the device treeMaxime Ripard1-3/+3
The TCA8418 might be used using different interrupt triggers on various boards. This is not working so far because the current code forces a falling edge trigger. The device tree already provides a trigger type, so let's use whatever it sets up, and since we can be loaded without DT, keep the old behaviour for the non-DT case. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15Input: mpr121 - switch to device tree probeAkinobu Mita1-43/+94
This driver currently only supports legacy platform data probe. This change adds device tree support and gets rid of platform data probe code since no one is actually using mpr121 platform data in the mainline. The device tree property parsing code is based on the work of atmel_captouch driver. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15Input: mpr121 - handle multiple bits change of status registerAkinobu Mita1-9/+14
This driver reports input events on their interrupts which are triggered by the sensor's status register changes. But only single bit change is reported in the interrupt handler. So if there are multiple bits are changed at almost the same time, other press or release events are ignored. This fixes it by detecting all changed bits in the status register. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15Input: mpr121 - set missing event capabilityAkinobu Mita1-0/+1
This driver reports misc scan input events on the sensor's status register changes. But the event capability for them was not set in the device initialization, so these events were ignored. This change adds the missing event capability. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15Input: mpr121 - remove unused field in struct mpr121_touchkeyAkinobu Mita1-1/+0
Remove unused key_val field in struct mpr121_touchkey. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-15Input: mpr121 - annotate PM methods as __maybe_unusedAkinobu Mita1-4/+2
Instead of using #ifdef, let's mark suspend and resume methods as __maybe_unused to provide better compile coverage. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-17Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds5-151/+192
Pull input subsystem updates from Dmitry Torokhov: - updated support for Synaptics RMI4 devices, including support for SMBus controllers, firmware update support, sensor tuning, and PS/2 guest support - ALPS driver now supports tracksticks on SS5 controllers - i8042 now uses chassis info to skip selftest on Asus laptops as list of individual models became too unwieldy - miscellaneous fixes to other drivers * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (67 commits) Input: imx6ul_tsc - generalize the averaging property Input: drv260x - use generic device properties Input: drv260x - use temporary for &client->dev Input: drv260x - fix input device's parent assignment Input: synaptics-rmi4 - add support for F34 V7 bootloader Input: drv260x - fix initializing overdrive voltage Input: ALPS - fix protcol -> protocol Input: i8042 - comment #else/#endif of CONFIG_PNP Input: lpc32xx-keys - fix invalid error handling of a requested irq Input: synaptics-rmi4 - fix debug for sensor clip Input: synaptics-rmi4 - store the attn data in the driver Input: synaptics-rmi4 - allow to add attention data Input: synaptics-rmi4 - f03 - grab data passed by transport device Input: synaptics-rmi4 - add support for F03 Input: imx6ul_tsc - convert int to u32 Input: imx6ul_tsc - add mask when set REG_ADC_CFG Input: synaptics-rmi4 - have only one struct platform data Input: synaptics-rmi4 - remove EXPORT_SYMBOL_GPL for internal functions Input: synaptics-rmi4 - remove mutex calls while updating the firmware Input: drv2667 - fix misuse of regmap_update_bits ...
2016-12-07Input: lpc32xx-keys - fix invalid error handling of a requested irqVladimir Zapolskiy1-1/+1
Semantics of NR_IRQS is different on machines with SPARSE_IRQ option disabled or enabled, in the latter case IRQs are allocated starting at least from the value specified by NR_IRQS and going upwards, so the check of (irq >= NR_IRQ) to decide about an error code returned by platform_get_irq() is completely invalid, don't attempt to overrule irq subsystem in the driver. The change fixes lpc32xx_keys driver initialization on boot: lpc32xx_keys 40050000.key: failed to get platform irq lpc32xx_keys: probe of 40050000.key failed with error -22 Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-17Input: gpio_keys - set input direction explicitlySudeep Holla2-0/+15
Commit 700a38b27eef ("Input: gpio_keys - switch to using generic device properties") switched to use generic device properties for GPIO keys and commit 5feeca3c1e39 ("Input: gpio_keys - add support for GPIO descriptors") switched from legacy GPIO numbers to GPIO descriptors. Previously devm_gpio_request_one was explicitly passed GPIOF_DIR_IN flag to set the GPIO direction as input. However devm_get_gpiod_from_child doesn't have such provisions and hence fwnode_get_named_gpiod can't set it as input. This breaks few platforms with the following error: " gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ unable to lock HW IRQ <n> for IRQ genirq: Failed to request resources for POWER (irq <x>) on irqchip gpio_keys: Unable to claim irq <x>; error -22 gpio-keys: probe failed with error -22 " This patch fixes the issue by setting input direction explicitly for gpio lines described by generic properties. Fixes: 700a38b27eef ("Input: gpio_keys - switch to using generic device properties") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-07Input: gpio_keys - switch to using generic device propertiesDmitry Torokhov1-72/+69
Make use of the device property API in this driver so that both OF based systems and ACPI based systems can use this driver. Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-07Input: gpio_keys - add support for GPIO descriptorsGeert Uytterhoeven1-11/+26
GPIO descriptors are the preferred way over legacy GPIO numbers nowadays. Convert the driver to use GPIO descriptors internally but still allow passing legacy GPIO numbers from platform data to support existing platforms. Based on commits 633a21d80b4a2cd6 ("input: gpio_keys_polled: Add support for GPIO descriptors") and 1ae5ddb6f8837558 ("Input: gpio_keys_polled - request GPIO pin as input."). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-07Input: gpio_keys - fix leaking DT node referencesDmitry Torokhov1-0/+3
for_each_available_child_of_node(node, pp) takes reference to 'pp' and drops it when attempting next iteration. However if we exit the loop early we need to drop the reference ourselves. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-07Input: gpio_keys - annotate PM methods as __maybe_unusedDmitry Torokhov1-4/+2
Instead of using #ifdef, let's mark suspend and resume methods as __maybe_unused to provide better compile coverage. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-07Input: gpio_keys_polled - always use gpiod_get_value_cansleepDmitry Torokhov1-11/+10
It does not matter if given GPIO may sleep or not when reading state, polling is always done in a non-atomic context, so we should always be able to simply use gpiod_get_value_cansleep(). Also let's note in the logs when we fail to read gpio state. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-07Input: gpio_keys_polled - keep button data constantDmitry Torokhov2-52/+63
Commit 633a21d80b4a ("input: gpio_keys_polled: Add support for GPIO descriptors") placed gpio descriptor into gpio_keys_button structure, which is supposed to be part of platform data and not modifiable by the driver. To keep the data constant, let's move the descriptor to gpio_keys_button_data structure instead. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-26Input: tca8418_keypad - hide gcc-4.9 -Wmaybe-uninitialized warningArnd Bergmann1-9/+12
Older versions of gcc warn about the tca8418_irq_handler function as they can't keep track of the variable assignment inside of the loop when using the -Wmaybe-unintialized flag: drivers/input/keyboard/tca8418_keypad.c: In function ‘tca8418_irq_handler’: drivers/input/keyboard/tca8418_keypad.c:172:9: error: ‘reg’ may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/input/keyboard/tca8418_keypad.c:165:5: note: ‘reg’ was declared here This is fixed in gcc-6, but it's possible to rearrange the code in a way that avoids the warning on older compilers as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-26Input: pxa27x_keypad - fix typo "debpunce" -> "debounce"Colin Ian King1-1/+1
Trivial fix to typo in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-13Merge tag 'v4.8' into nextDmitry Torokhov4-14/+14
Sync up with mainline to bring in I2C host notify changes and other updates.
2016-10-07Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds5-44/+242
Pull input subsystem updates from Dmitry Torokhov: "You will get - a new driver for Elan eKTF2127 touchscreen controllers - a new "gpio-decoder" driver to read and report state of several GPIO lines - an ADC resistor ladder driver - the ft6326 driver is removed because edt-ft5x06 handles the same devices just fine. .. plus the regular slew of driver fixes/enhancements" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits) Input: elan_i2c - fix return tests of i2c_smbus_read_block_data() Input: ektf2127 - mark PM functions as __maybe_unused Input: snvs_pwrkey - drop input_free_device call if input_register_device fails Input: add support for Elan eKTF2127 touchscreen controller Input: serio - add hangup support Input: tps65218-pwrbutton - add support for tps65217 variant Input: jornada720_ts - get rid of mach/irqs.h and mach/hardware.h includes Input: jornada720_kbd - remove unneeded mach/hardware.h include Input: focaltech - mark focaltech_set_resolution() static Input: wdt87xx_i2c - fix the flash erase issue Input: gpio-keys-polled - don't use unit-address with button nodes Input: add generic input driver to read encoded GPIO lines Input: add ADC resistor ladder driver Input: pegasus_notetaker - directly include workqueue header Input: elants_i2c - get product id on recovery mode for FW update Input: wm97xx - remove deprecated create_singletheread_workqueue Input: mc13783_ts - remove deprecated create_singletheread_workqueue Input: psmouse - remove deprecated create_singletheread_workqueue Input: jornada720_kbd - switch to using dev_dbg Input: jornada720_kbd - get rid of mach/irqs.h include ...
2016-10-07Merge tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds1-104/+31
Pull MFD updates from Lee Jones: "Core framework: - Add the MFD bindings doc to MAINTAINERS New drivers: - X-Powers AC100 Audio CODEC and RTC - TI LP873x PMIC - Rockchip RK808 PMIC - Samsung Exynos Low Power Audio New device support: - Add support for STMPE1600 variant to stmpe - Add support for PM8018 PMIC to pm8921-core - Add support for AXP806 PMIC in axp20x - Add support for AXP209 GPIO in axp20x New functionality: - Add support for Reset to all STMPE variants - Add support for MKBP event support to cros_ec - Add support for USB to intel_soc_pmic_bxtwc - Add support for IRQs and Power Button to tps65217 Fix-ups: - Clean-up defunct author emails (da9063, max14577) - Kconfig fixups (wm8350-i2c, as37220 - Constify (altera-a10sr, sm501) - Supply PCI IDs (intel-lpss-pci) - Improve clocking (qcom_rpm) - Fix IRQ probing (ucb1x00-core) - Ensure fault log is cleared (da9052) - Remove NO_IRQ check (ucb1x00-core) - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci) - Non standard declaration (tps65217, max8997-irq) - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs, cros_ec_spi) - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099, sun6i-prcm, twl-core) - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x, lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona) Bugfixes: - Release OF pointer (qcom_rpm) - Avoid double shifting in suspend/resume (88pm80x) - Fix 'defined but not used' error (exynos-lpass) - Fix 'sleeping whilst attomic' (atmel-hlcdc)" * tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits) mfd: arizona: Handle probe deferral for reset GPIO mfd: arizona: Remove arizona_of_get_named_gpio helper function mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config mfd: twl6040: Register child device for twl6040-pdmclk mfd: cros_ec_spi: Remove unused variable 'request' mfd: omap-usb-host: Return value is not 'const int' mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine() mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem() mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls mfd: ab8500-debugfs: Prevent initialised field from being over-written mfd: max8997-irq: 'inline' should be at the beginning of the declaration mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer mfd: tps65217: Fix nonstandard declaration mfd: lp873x: Remove unused mutex lock from struct lp873x mfd: atmel-hlcdc: Do not sleep in atomic context mfd: exynos-lpass: Mark PM functions as __maybe_unused mfd: intel-lpss: Add default I2C device properties for Apollo Lake mfd: twl-core: Make it explicitly non-modular mfd: sun6i-prcm: Make it explicitly non-modular mfd: smsc-ece1099: Make it explicitly non-modular ...
2016-10-03Merge branch 'next' into for-linusDmitry Torokhov5-44/+242
Prepare first round of input updates for 4.9 merge window.
2016-09-26Input: snvs_pwrkey - drop input_free_device call if input_register_device failsAxel Lin1-1/+0
Current code uses devm_input_allocate_device() so don't explicitly call input_free_device if input_register_device fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-10Input: jornada720_kbd - remove unneeded mach/hardware.h includeRussell King1-1/+0
The Jornada720 keyboard driver does not make use of anything from the mach/hardware.h header, so this header can be removed. Tested-by: Adam Wysocki <armlinux@chmurka.net> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-31Input: cros_ec_keyb: Stop handling interrupts directlyVic Yang1-104/+31
Because events other that keyboard ones will be handled by now on by other drivers, stop directly handling interrupts and instead listen to the new notifier in the MFD driver. Signed-off-by: Vic Yang <victoryang@google.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-29Input: add ADC resistor ladder driverAlexandre Belloni3-0/+226
A common way of multiplexing buttons on a single input in cheap devices is to use a resistor ladder on an ADC. This driver supports that configuration by polling an ADC channel provided by IIO. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-26Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-1/+1
Pull input subsystem fixes from Dmitry Torokhov: "Simply small driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ads7846 - remove redundant regulator_disable call Input: synaptics-rmi4 - fix register descriptor subpacket map construction Input: tegra-kbc - fix inverted reset logic Input: silead - use devm_gpiod_get Input: i8042 - set up shared ps2_cmd_mutex for AUX ports
2016-08-22Input: jornada720_kbd - switch to using dev_dbgDmitry Torokhov1-4/+2
Switch to using dev_dbg instead of naked printk so that output is uniform with the other driver messages in the kernel. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: jornada720_kbd - get rid of mach/irqs.h includeRussell King1-4/+7
Switch the jornada720 keyboard driver to obtain its interrupt from the platform device, rather than via a hard-coded interrupt number obtained from the mach/irqs.h header. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: jornada720_kbd - switch to devm_* APIsRussell King1-35/+8
Switch the jornada720_kbd driver to use the devm_* APIs. This is in preparation to removing the mach/irqs.h include from this driver. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-22Input: tegra-kbc - fix inverted reset logicMasahiro Yamada1-1/+1
Commit fe6b0dfaba68 ("Input: tegra-kbc - use reset framework") accidentally converted _deassert to _assert, so there is no code to wake up this hardware. Fixes: fe6b0dfaba68 ("Input: tegra-kbc - use reset framework") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-08-05Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-10/+9
Pull more input updates from Dmitry Torokhov: "Two new drivers for touchscreen controllers: - Silead touchscreen controllers - SiS 9200 family touchscreen controllers and a few driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: silead - remove some dead code Input: sis-i2c - select CONFIG_CRC_ITU_T Input: add driver for SiS 9200 family I2C touchscreen controllers Input: ili210x - fix permissions on "calibrate" attribute Input: elan_i2c - properly wake up touchpad on ASUS laptops Input: add driver for Silead touchscreens Input: elantech - fix debug dump of the current packet Input: rotary_encoder - support binary encoding of states Input: xpad - power off wireless 360 controllers on suspend Input: i8042 - break load dependency between atkbd/psmouse and i8042 Input: synaptics-rmi4 - do not check for NULL when calling of_node_put() Input: cros_ec_keyb - cleanup use of dev
2016-08-01Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-2/+2
Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
2016-07-27Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds2-2/+2
Pull input updates from Dmitry Torokhov: "Updates for the input subsystem. This contains the following new drivers promised in the last merge window: - driver for touchscreen controller found in Surface 3 - driver for Pegasus Notetaker tablet - driver for Atmel Captouch Buttons - driver for Raydium I2C touchscreen controllers - powerkey driver for HISI 65xx SoC plus a few fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: tty/vt/keyboard - use memdup_user() Input: pegasus_notetaker - set device mode in reset_resume() if in use Input: pegasus_notetaker - cancel workqueue's work in suspend() Input: pegasus_notetaker - fix usb_autopm calls to be balanced Input: pegasus_notetaker - handle usb control msg errors Input: wacom_w8001 - handle errors from input_mt_init_slots() Input: wacom_w8001 - resolution wasn't set for ABS_MT_POSITION_X/Y Input: pixcir_ts - add support for axis inversion / swapping Input: icn8318 - use of_touchscreen helpers for inverting / swapping axes Input: edt-ft5x06 - add support for inverting / swapping axes Input: of_touchscreen - add support for inverted / swapped axes Input: synaptics-rmi4 - use the RMI_F11_REL_BYTES define in rmi_f11_rel_pos_report Input: synaptics-rmi4 - remove unneeded variable Input: synaptics-rmi4 - remove pointer to rmi_function in f12_data Input: synaptics-rmi4 - support regulator supplies Input: raydium_i2c_ts - check CRC of incoming packets Input: xen-kbdfront - prefer xenbus_write() over xenbus_printf() where possible Input: fix a double word "is is" in include/linux/input.h Input: add powerkey driver for HISI 65xx SoC Input: apanel - spelling mistake - "skiping" -> "skipping" ...
2016-07-26Input: cros_ec_keyb - cleanup use of devDouglas Anderson1-10/+9
In cros_ec_keyb we stored "dev" in "struct cros_ec_keyb", but this was the EC's dev pointer and not the keyboard's. Let's clean this up to make it the keyboard's dev pointer. This could be useful in future patches but also has the nice effect of changing a few printouts to include the name of the keyboard device instead of the EC device, so we will see: [ 1.224648] cros-ec-keyb ff110000.spi:ec@0:keyboard-controller: valid_keys[00] = 0x14 instead of: [ 1.224505] cros-ec-spi spi0.0: valid_keys[00] = 0x14 Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-06input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chipAlexander Shiyan1-2/+2
This patch changes the compatibility string to match with the smallest supported chip (EP7209). Since the DT-support for this CPU is not yet announced, this change is safe. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-06-23Input: tegra-kbc - fix spelling mistake: "porperly" -> "properly"Colin Ian King1-1/+1
trivial fix to spelling mistake in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.