aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/mouse/alps.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-07-30Input: alps - Rushmore and v7 resolution supportHans de Goede1-0/+2
Add support for querying the physical size from the touchpad for Rushmore and v7 touchpads, and use that to tell userspace the device resolution. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - add support for v7 devicesYunkang Tang1-0/+18
Such as found on the new Toshiba Portégé Z30-A and Z40-A. Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> [hdegoede@redhat.com: Remove softbutton handling, this is done in userspace] [hdegoede@redhat.com: Report INPUT_PROP_BUTTONPAD] [hdegoede@redhat.com: Do not report fake PRESSURE, reporting BTN_TOUCH is enough] [hdegoede@redhat.com: Various cleanups / refactoring] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - cache firmware versionHans de Goede1-0/+2
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - change decode function prototype to return an intHans de Goede1-1/+1
So that decode functions can return a failure when appropriate. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - use struct input_mt_pos to track coordinatesHans de Goede1-13/+14
This is a preparation patch for switching the DIY mt handling to using input_mt_assign_slots && input_mt_sync_frame. struct alps_fields is quite large, so while making changes to almost all uses of it lets put it in our priv data instead of on the stack. Having it in our priv data also allows using it directly for storing values which need to be cached, rather then having separate x, y, z, fingers, etc. copies in our priv data. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - process_bitmap: add alps_get_bitmap_points() helper functionHans de Goede1-0/+5
Factor out the identical code for getting the bitmap points for x and y into a helper function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - process_bitmap: don't invert the Y-axis on RushmoreHans de Goede1-2/+2
Rushmore models don't have the Y-axis data in the bitmap inverted. Since we now have 2 different Y orientations, make the Y bitmap data processing use a forward loop like the X bitmap data processing, unifying the 2, and invert the data later, except on Rushmore. So far no-one has noticed this because the synaptics driver only uses the non mt coordinates (except on clickpads, and there are no alps clickpads using process_bitmap). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-26Input: ALPS - add support for "Dolphin" devicesYunkang Tang1-1/+6
This adds support for another flavor of ALPS protocol used in newer "Dolphin" devices. Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-05Input: ALPS - add support for DualPoint device on Dell XT2 modelYunkang Tang1-0/+1
The device uses special MPU controller that necessitates the new initialization sequence for the device. We also define a new protocol for the trackpad that allows reporting better resolution than older V2 protocol. Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-22Input: ALPS - add "Dolphin V1" touchpad supportDave Turvene1-0/+1
These touchpads use a different protocol; they have been seen on Dell N5110, Dell 17R SE, and others. The official ALPS driver identifies them by looking for an exact match on the E7 report: 73 03 50. Dolphin V1 returns an EC report of 73 01 xx (02 and 0d have been seen); Dolphin V2 returns an EC report of 73 02 xx (02 has been seen). Dolphin V2 probably needs a different initialization sequence and/or report parser, so it is left for a future commit. Signed-off-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - make the V3 packet field decoder "pluggable"Kevin Cernekee1-0/+38
A number of different ALPS touchpad protocols can reuse alps_process_touchpad_packet_v3() with small tweaks to the bitfield decoding. Create a new priv->decode_fields() callback that handles the per-model differences. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - move pixel and bitmap info into alps_data structKevin Cernekee1-0/+8
Newer touchpads use different constants, so make them runtime- configurable. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - use function pointers for different protocol handlersKevin Cernekee1-0/+7
In anticipation of adding more ALPS protocols and more per-device quirks, use function pointers instead of switch statements to call functions that differ from one device to the next. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - rework detection sequenceKevin Cernekee1-4/+4
If the E6 report test passes, get the E7 and EC reports right away and then try to match an entry in the table. Pass in the alps_data struct, so that the detection code will be able to set operating parameters based on information found during detection. Change the version (psmouse->model) to report the protocol version only, in preparation for supporting models that do not show up in the ID table. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - copy "model" info into alps_data structKevin Cernekee1-2/+12
Not every type of ALPS touchpad is well-suited to table-based detection. Start moving the various alps_model_data attributes into the alps_data struct so that we don't need a unique table entry for every possible permutation of protocol version, flags, byte0/mask0, etc. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - document the alps.h data structuresKevin Cernekee1-13/+61
Add kernel-doc markup. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-05-10Input: ALPS - add semi-MT support for v4 protocolGeorge Pantalos1-0/+2
This patch adds semi-MT support for ALPS v4 protocol touchpads. It is based on the work by Seth Forshee for ALPS v3 and v4 protocol support. Three packets are required to assemble and process the MT data. ST events are reported at once to avoid latency. If there were two contacts or more, report MT data instead of ST events. Thanks to Seth Forshee for providing most of the code, guidance and insight for producing this patch. Signed-off-by: George Pantalos <gpantalos@gmail.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-07Input: ALPS - add semi-MT support for v3 protocolSeth Forshee1-0/+1
Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-07Input: ALPS - add support for protocol versions 3 and 4Seth Forshee1-0/+14
This patch adds support for two ALPS touchpad protocols not supported currently by the driver, which I am arbitrarily naming version 3 and version 4. Support is single-touch only at this time, although both protocols are capable of limited multitouch support. Thanks to Andrew Skalski, who did the initial reverse-engineering of the v3 protocol. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-07Input: ALPS - add protocol version field in alps_model_infoSeth Forshee1-0/+4
In preparation for adding support for more ALPS protocol versions, add a field for the protocol version to the model info instead of using a field in the flags. OLDPROTO and !OLDPROTO are now called version 1 and version 2, repsectively. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15Input: ALPS - add interleaved protocol support (Dell E6x00 series)Sebastian Kapfer1-0/+1
Properly handle version of the protocol where standard PS/2 packets from trackpoint are stuffed into middle (byte 3-6) of the standard ALPS packets when both the touchpad and trackpoint are used together. The patch is based on work done by Matthew Chapman and additional research done by David Kubicek and Erik Osterholm: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/296610 Many thanks to David Kubicek for his efforts in researching fine points of this new version of the protocol, especially interaction between pad and stick in these models. Signed-off-by: Sebastian Kapfer <sebastian_kapfer@gmx.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-10Input: psmouse - use boolean typeDmitry Torokhov1-2/+2
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-04-12Input: ALPS - handle errors from input_register_device()Dmitry Torokhov1-1/+0
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-03-10Input: psmouse - allow disabing certain protocol extensionsAndres Salomon1-3/+14
Allow ALPS, LOGIPS2PP, LIFEBOOK, TRACKPOINT and TOUCHKIT protocol extensions of psmouse to be disabled during compilation. This will allow users save some memory when they are sure that they will only use a certain type of mice. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-09-10Input: constify psmouse driverHelge Deller1-1/+1
Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-10-28[PATCH] drivers/input/mouse: convert to dynamic input_dev allocationDmitry Torokhov1-1/+1
Input: convert drivers/input/mouse to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2Linus Torvalds1-0/+32
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.