aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/mouse (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-10-18Input: logips2pp - model 73 is actually TrackMan FXDmitry Torokhov1-1/+1
Reported-and-tested-by: Harald Dunkel <harald.dunkel@t-online.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-10-12Input: synaptics - add another Protege M300 to rate blacklistDmitry Torokhov1-0/+10
Apparently some of Toshiba Protege M300 identify themselves as "Portable PC" in DMI so we need to add that to the DMI table as well. We need DMI data so we can automatically lower Synaptics reporting rate from 80 to 40 pps to avoid over-taxing their keyboard controllers. Tested-by: Rod Davison <roddavison@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-17Input: synaptics_i2c - switch to using __cancel_delayed_work()Dmitry Torokhov1-19/+32
cancel_delayed_work() may spin and therefore should not be used in interrupt contexts. Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-17Input: libps2 - additional locking for i8042 portsDmitry Torokhov1-8/+10
The serio ports on i8042 are not completely isolated; while we provide enough locking to ensure proper serialization when accessing control and data registers AUX and KBD ports can still have an effect on each other on PS/2 protocol level. The most prominent effect is that issuing a command for the device connected to one port may cause abort of the command currently executing by the device connected to another port. Since i8042 nor serio subsystem are not aware of the details of the PS/2 protocol (length of the commands and their replies and so on) the locking should be done on libps2 level by adding special handling when we see that we are dealing with serio port on i8042. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-13Input: bcm5974 - silence uninitialized variables warningsHenrik Rydberg1-15/+16
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-10Input: psmouse - use boolean typeDmitry Torokhov20-125/+133
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-19Input: add new driver for Sentelic Finger Sensing PadTai-hwa Liang6-1/+1000
This is the driver for Sentelic Finger Sensing Pad which can be found on MSI WIND Netbook. Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-19Input: psmouse - allow defining read-only attributesDmitry Torokhov1-5/+16
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09Input: combine hil_kbd and hil_ptr driversDmitry Torokhov3-456/+0
hil_kbd and hil_ptr look like twins so it makes sense to combine them into a single driver. [deller@gmx.de: add MODULE_ALIAS() entry for mouse] Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05Input: serio - don't use serio->write() directlyDmitry Torokhov2-20/+20
We have a nice wrapper for that. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05Input: hgpk - forced recalibration for the OLPC touchpadPaul Fox1-3/+52
The OLPC XO laptop incorporates a combination touchpad/tablet device which unfortunately requires frequent recalibration. The driver will force this automatically when various suspicious behaviors are observed, and the user can recalibrate manually (with a special keyboard sequence). There's currently no way, however, for an external program to cause recalibration. We can not use the reconnect capability which is already available in /sys because full reset of the touchpad takes 1.1 - 1.2 secons which is too long. This patch creates a new node in /sys which, when written with '1', will force a touchpad recalibration; no other writes (or reads) of this node are supported. Signed-off-by: Paul Fox <pgf@laptop.org> Acked-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-07Input: gpio_mouse - use standard driver registration methodSaeed Bishara1-6/+5
This patch is needed when the gpio's became available only at late stages, for example, when using i2c gpio expander. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-19Input: add driver for Synaptics I2C touchpadMike Rapoport3-0/+695
This driver supports Synaptics I2C touchpad controller on eXeda mobile device. Unfortunaltely it only works in relative mode and thus is not comaptible with Xorg Synaptics driver. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-19Input: synaptics - add support for reporting x/y resolutionTero Saarni2-0/+30
Synaptics uses anisotropic coordinate system. On some wide touchpads vertical resolution can be twice as high as horizontal which causes unequal sensitivity on x/y directions. Add support for reading the resolution with EVIOCGABS ioctl. Signed-off-by: Tero Saarni <tero.saarni@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-11Input: ALPS - handle touchpoints buttons correctlyUlrich Dangel1-4/+9
When pressing any button belonging to the touchpoint, the generated click events don't belong to the touchpoint but to the touchpad. This patch fixes this behaviour, the events will be sent via the correct device, so scrolling with touchpoint is possible. Signed-off-by: Ulrich Dangel <uli@spamt.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-03Input: appletouch - improve finger detectionJeremy Huddleston1-1/+1
The appletouch driver is prone to reporting multiple fingers when only one is pressing. The appletouch driver queries an array of pressure sensors and counts local maxima in pressure to determine the number of fingers. It just does this on the raw values, so a data stream like: 0 100 250 300 299 300 250 100 0 actually registers as 2 fingers. This patch updates the logic to ignore small dips in pressure that are less than the threshold. Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-15Input: psmouse - ESD workaround fix for OLPC XO touchpadZephaniah E. Hull1-1/+3
It appears that when the XO touchpad unit resets from ESD, it sends AA AA instead of AA 00, the psmouse-base code handles the case of AA 00 by triggering a serio reconnect for the port, causing a full reprobe of the device. Testing with OFW shows that this is likely to solve the problem, so the attached patch simply expands the existing test to also catch AA AA. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Deepak Saxena <dsaxena@laptop.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-08Input: lifebook - don't send incomplete eventsDmitry Torokhov1-12/+13
When we get a relative packet from trackpoint (when we deal with touchscreen/trackpoint combo) we should not send events for the device corresponding to touchscreen as it confuses evtouch driver (it looks like it keeps previously reported absolute coordinates and the cursor stays in the same place). Reported-by: Marcin Drewka <laimoriel@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-08Input: ALPS - Dell Latitude D630/D800 have DualPointDmitry Torokhov1-9/+9
Dell Latitude D630/D800 have DualPoint (touchpad plus trackpoint) instead of a simple touchpad and a pass-through port for external PS/2 mouse. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2009-05-02Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds6-42/+150
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document the multi-touch (MT) protocol Input: add detailed multi-touch finger data report protocol Input: allow certain EV_ABS events to bypass all filtering Input: bcm5974 - add documentation for the driver Input: bcm5974 - augment debug information Input: bcm5974 - Add support for the Macbook 5 (Unibody) Input: bcm5974 - add quad-finger tapping Input: bcm5974 - prepare for a new trackpad header type Input: appletouch - fix DMA to/from stack buffer Input: wacom - fix TabletPC touch bug Input: lifebook - add DMI entry for Fujitsu B-2130 Input: ALPS - add signature for Toshiba Satellite Pro M10 Input: elantech - make sure touchpad is really in absolute mode Input: elantech - provide a workaround for jumpy cursor on firmware 2.34 Input: ucb1400 - use disable_irq_nosync() in irq handler Input: tsc2007 - use disable_irq_nosync() in irq handler Input: sa1111ps2 - use disable_irq_nosync() in irq handlers Input: omap-keypad - use disable_irq_nosync() in irq handler
2009-04-28Input: bcm5974 - augment debug informationHenrik Rydberg1-4/+10
Add more button and finger data to the debug output. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28Input: bcm5974 - Add support for the Macbook 5 (Unibody)Henrik Rydberg1-2/+43
This patch adds support for the new unibody Macbook, with physically integrated button and trackpad. Since the integrated button changes the logic for touch-and-click, a device capability bit mask is now reported in input_id.version, which can be picked up by user space via a EVIOCGID call. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: David M. Lary <dmlary@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28Input: bcm5974 - add quad-finger tappingHenrik Rydberg1-1/+3
The integrated button on the new unibody Macbooks presents a need to report explicit four-finger actions. Evidently, the finger pressing the button is also touching the trackpad, so in order to fully support three-finger actions, the driver must be able to report four-finger actions. This patch adds a new button, BTN_TOOL_QUADTAP, which achieves this. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28Input: bcm5974 - prepare for a new trackpad header typeHenrik Rydberg1-21/+26
The new unibody Macbooks are equipped with an integrated button and trackpad. The package header of the trackpad interface has changed to also contain information about the integrated button. This patch performs the necessary preparations to allow for the new package header. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28Input: appletouch - fix DMA to/from stack bufferBob Copeland1-6/+18
CONFIG_DMA_API_DEBUG spotted an instance of appletouch using an array on the stack as a DMA buffer for certain hardware. Change it to use a kmalloc()ed buffer instead. Signed-off-by: Bob Copeland <me@bobcopeland.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-27maple: input: fix up maple mouse driverAdrian McMenamin1-20/+23
The maple mouse driver currently in mainline is broken: bash-3.1# modprobe maplemouse [ 56.886378] input: Dreamcast Mouse as /devices/virtual/input/input3 [ 56.918379] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 56.930543] pc = c003304e [ 56.934973] *pde = 00000000 [ 56.944948] Oops: 0000 [#1] [ 56.947867] Modules linked in: maplemouse(+) [ 56.952353] [ 56.953921] Pid : 1157, Comm: \0x09\0x09modprobe [ 56.958021] CPU : 0 \0x09\0x09Not tainted (2.6.30-rc2-00130-g3e98f9f #1) [ 56.958052] [ 56.966567] PC is at dc_mouse_open+0xe/0x40 [maplemouse] [ 56.972125] PR is at input_open_device+0x8a/0xc0 [ 56.976944] PC : c003304e SP : 8c88bdcc SR : 40008100 TEA : c0033834 [ 56.983854] R0 : 000006c4 R1 : 00000000 R2 : 40008101 R3 : 00000000 [ 56.990744] R4 : 8c8db800 R5 : c0033080 R6 : 00000005 R7 : 00000200 [ 56.997635] R8 : 8c8db800 R9 : 8c8dbe3c R10 : 00000000 R11 : 8c98881c [ 57.004525] R12 : 8c8dbe64 R13 : 8ca50140 R14 : 8c88bdd4 [ 57.010063] MACH: 00000497 MACL: 00000348 GBR : 29674440 PR : 8c1b4d0a [ 57.016939] ... Here is a fix for this, keeping an open and close, so reducing the load on the system when the mouse is not in use, and also properly referencing the maple device buffer following the recent update. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-24Input: lifebook - add DMI entry for Fujitsu B-2130Dmitry Torokhov1-0/+6
Although we already have entry for ZEPHYR the match is done on product name whereas B-2130 BIOS has it in board name. Reported-by: Yuriy Zhuravlev <stalkerg@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-23Input: ALPS - add signature for Toshiba Satellite Pro M10Dmitry Torokhov1-0/+1
This toshiba has a touchpad with trackpoint and 2 sets of left and right buttons (above and below touchpad). Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-18Input: elantech - make sure touchpad is really in absolute modeArjan Opmeer1-5/+16
There exist laptops with Elantech touchpads where switching to absolute mode does not happen, although writing the configuration register succeeds without error. Reading back the register afterwards reveils that the absolute mode bit is not set as if masked out by the touchpad firmware. Always read back register 0x10, make sure that for hardware version 1 the absolute mode bit is actually set and fail otherwise. This prevents the case where the touchpad is claimed by the Elantech driver but is nonetheless not working. Signed-off-by: Arjan Opmeer <arjan@opmeer.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-18Input: elantech - provide a workaround for jumpy cursor on firmware 2.34Arjan Opmeer2-4/+28
It seems that Elantech touchpad firmware version 2.34 on the Hercules eCAFÉ suffers from a problem where bogus coordinates get reported at the beginning of a touch action. This causes the mouse cursor or the scrolled page to jump. Included patch provides a workaround that discards mouse packets that are likely to contain bogus coordinates. The workaround is activated when we detect touchpad with fimware version 2.34. Signed-off-by: Arjan Opmeer <arjan@opmeer.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-16Merge branch 'next' into for-linusDmitry Torokhov1-1/+0
2009-04-15Input: pc110pad - remove unused variable devIlpo Järvinen1-1/+0
dev is leftover from b0ee0d3eb31a163c958f2960906c44bcdfdc607b (Input: pc110pad - use no_pci_devices()). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-08Merge branch 'next' into for-linusDmitry Torokhov5-9/+165
2009-04-03Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-1/+1
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) trivial: Update my email address trivial: NULL noise: drivers/mtd/tests/mtd_*test.c trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h trivial: Fix misspelling of "Celsius". trivial: remove unused variable 'path' in alloc_file() trivial: fix a pdlfush -> pdflush typo in comment trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL trivial: wusb: Storage class should be before const qualifier trivial: drivers/char/bsr.c: Storage class should be before const qualifier trivial: h8300: Storage class should be before const qualifier trivial: fix where cgroup documentation is not correctly referred to trivial: Give the right path in Documentation example trivial: MTD: remove EOL from MODULE_DESCRIPTION trivial: Fix typo in bio_split()'s documentation trivial: PWM: fix of #endif comment trivial: fix typos/grammar errors in Kconfig texts trivial: Fix misspelling of firmware trivial: cgroups: documentation typo and spelling corrections trivial: Update contact info for Jochen Hein trivial: fix typo "resgister" -> "register" ...
2009-04-02workqueue: add to_delayed_work() helper functionJean Delvare1-1/+1
It is a fairly common operation to have a pointer to a work and to need a pointer to the delayed work it is contained in. In particular, all delayed works which want to rearm themselves will have to do that. So it would seem fair to offer a helper function for this operation. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-30trivial: fix typo "varaible" -> "variable"Uwe Kleine-Koenig1-1/+1
This patch was created by git grep -l '[vV]araible' | xargs -r -t perl -p -i -e 's/\b([Vv]ar)ai(bles?)\b/$1ia$2/g' Signed-off-by: Uwe Kleine-Koenig <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-28Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-1/+1
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits) [ARM] 5435/1: fix compile warning in sanity_check_meminfo() [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0 [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins imxfb: Fix TFT mode i.MX21/27: remove ifdef CONFIG_FB_IMX imxfb: add clock support mxc: add arch_reset() function clkdev: add possibility to get a clock based on the device name i.MX1: remove fb support from mach-imx [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined Gemini: Add support for Teltonika RUT100 Gemini: gpiolib based GPIO support v2 MAINTAINERS: add myself as Gemini architecture maintainer ARM: Add Gemini architecture v3 [ARM] OMAP: Fix compile for omap2_init_common_hw() MAINTAINERS: Add myself as Faraday ARM core variant maintainer ARM: Add support for FA526 v2 [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h [ARM] collie: fix two minor formatting nits ...
2009-03-25[ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.hRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-08Merge commit 'v2.6.29-rc7' into nextDmitry Torokhov4-15/+30
2009-03-04Merge branches 'x86/apic', 'x86/cpu', 'x86/fixmap', 'x86/mm', 'x86/sched', 'x86/setup-lzma', 'x86/signal' and 'x86/urgent' into x86/coreIngo Molnar4-15/+30
2009-03-02Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds4-15/+30
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - touchpad driver miss-recognising logitech mice Input: synaptics - ensure we reset the device on resume Input: usbtouchscreen - fix eGalax HID ignoring Input: ambakmi - fix timeout handling in amba_kmi_write() Input: pxa930_trkball - fix write timeout handling Input: struct device - replace bus_id with dev_name(), dev_set_name() Input: bf54x-keys - fix debounce time validation Input: spitzkbd - mark probe function as __devinit Input: omap-keypad - mark probe function as __devinit Input: corgi_ts - mark probe function as __devinit Input: corgikbd - mark probe function as __devinit Input: uvc - the button on the camera is KEY_CAMERA Input: psmouse - make MOUSE_PS2_LIFEBOOK depend on X86 Input: atkbd - make forced_release_keys[] static Input: usbtouchscreen - allow reporting calibrated data
2009-02-28Input: psmouse - add newline to OLPC HGPK touchpad debuggingAndy Whitcroft1-1/+1
When probing for the OLPC HGPK touchpad the ID of the probed touchpad is emitted, but the debug is missing the terminating newline. This causes later information to run into it, and for that to be categorised incorrectly at KERN_DBG. Fix this up. Reported-by: Matt Zimmerman <mdz@canonical.com> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28Input: elantech - touchpad driver miss-recognising logitech miceArjan Opmeer1-8/+24
Some Logitech mice react to the magic knock like Elantech touchpad would. This leads to those mice being misdetected as Elantech touchpads. Add a version query to elantech_detect() to distinguish the two. [dtor@mail.ru: - lower severity of some messages - when we are not sure yet if device is Elantech or not not responding to knock is not an error. ] Signed-off-by: Arjan Opmeer <arjan@opmeer.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-28Input: synaptics - ensure we reset the device on resumeAndy Whitcroft1-5/+4
When resuming from suspend newer Synaptics touchpads do not recover correctly. Analysis of the resume sequence as applied in Linux was compared to that of other operating systems. This indicated that the other OSs were resetting the mouse before attempting to detect it (for all Synaptics touchpads, old and new). Applying this same modification fixes these newer Synaptics touchpads and brings the driver into line with common OS reset behaviour. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-01Input: pxa930_trkball - fix write timeout handlingRoel Kluin1-1/+1
With a postfix decrement i reaches -1 rather than 0, but after the loop it is tested whether it has become 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-01-29Input: pc110pad - use no_pci_devices()Roel Kluin1-4/+1
Use no_pci_devices() helper instead of doing explicit get/put. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-01-29Input: add support for the Maple mouse on the SEGA DreamcastAdrian McMenamin3-4/+163
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-01-30x86: allow more than 8 cpus to be used on 32-bitYinghai Lu1-1/+1
X86_PC is the only remaining 'sub' architecture, so we dont need it anymore. This also cleans up a few spurious references to X86_PC in the driver space - those certainly should be X86. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-10Input: psmouse - make MOUSE_PS2_LIFEBOOK depend on X86Jean Delvare1-1/+1
All Fujitsu-Siemens Lifebook systems are x86-based, so we might as well make MOUSE_PS2_LIFEBOOK depend on X86. This will avoid surprising things like: arch/arm/configs/s3c2410_defconfig:CONFIG_MOUSE_PS2_LIFEBOOK=y Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-01-08[ARM] fix pxa930_trkball build errorsRussell King1-2/+2
drivers/input/mouse/pxa930_trkball.c: In function `pxa930_trkball_probe': drivers/input/mouse/pxa930_trkball.c:189: error: `ret' undeclared (first use in this function) drivers/input/mouse/pxa930_trkball.c:230: error: `ret' undeclared (first use in this function) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.