aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/mouse (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-07-12Merge branch 'next' into for-linusDmitry Torokhov1-8/+9
Bring in second round of updates for 3.11.
2013-07-06Input: elantech - fix for newer hardware versions (v7)Matteo Delfino1-8/+9
* Fix version recognition in elantech_set_properties The new hardware reports itself as v7 but the packets' structure is unaltered. * Fix packet type recognition in elantech_packet_check_v4 The bitmask used for v6 is too wide, only the last three bits of the third byte in a packet (packet[3] & 0x03) are actually used to distinguish between packet types. Starting from v7, additional information (to be interpreted) is stored in the remaining bits (packets[3] & 0x1c). In addition, the value stored in (packet[0] & 0x0c) is no longer a constant but contains additional information yet to be deciphered. This change should be backwards compatible with v6 hardware. Additional-author: Giovanni Frigione <gio.frigione@gmail.com> Signed-off-by: Matteo Delfino <kendatsuba@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-02Input: bcm5974 - add support for the 2013 MacBook AirDmitry Torokhov1-2/+34
The June 2013 Macbook Air (13'') has a new trackpad protocol; four new values are inserted in the header, and the mode switch is no longer needed. This patch adds support for the new devices. Cc: stable@vger.kernel.org Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-27Merge branch 'for-next' of git://github.com/rydberg/linux into nextDmitry Torokhov2-1/+3
Pull in changes from Henrik: "a trivial MT documentation fix".
2013-06-05Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-0/+2
Pull input fixes from Dmitry Torokhov: "Just a 2 small driver fixups here" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - fix a typo for Cintiq 22HDT Input: synaptics - fix sync lost after resume on some laptops
2013-06-04Input: synaptics - fix sync lost after resume on some laptopsEric Miao1-0/+2
In summary, the symptom is intermittent key events lost after resume on some machines with synaptics touchpad (seems this is synaptics _only_), and key events loss is due to serio port reconnect after psmouse sync lost. Removing psmouse and inserting it back during the suspend/resume process is able to work around the issue, so the difference between psmouse_connect() and psmouse_reconnect() is the key to the root cause of this problem. After comparing the two different paths, synaptics driver has its own implementation of synaptics_reconnect(), and the missing psmouse_probe() seems significant, the patch below added psmouse_probe() to the reconnect process, and has been verified many times that the issue could not be reliably reproduced. There are two PS/2 commands in psmouse_probe(): 1. PSMOUSE_CMD_GETID 2. PSMOUSE_CMD_RESET_DIS Only the PSMOUSE_CMD_GETID seems to be significant. The PSMOUSE_CMD_RESET_DIS is irrelevant to this issue after trying several times. So we have only implemented this patch to issue the PSMOUSE_CMD_GETID so far. Tested-by: Daniel Manrique <daniel.manrique@canonical.com> Signed-off-by: James M Leddy <james.leddy@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-23Input: navpoint - pass correct pointer to free_irq()Lars-Peter Clausen1-1/+1
free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: <smpl> @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-1/+1
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-05-05Input: gpio_mouse - remove redundant platform_set_drvdata()Sachin Kamat1-3/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-05-05Input: amimouse - remove redundant platform_set_drvdata()Sachin Kamat1-1/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-19Input: trackpoint - Optimize trackpoint init to use power-on resetShawn Nematbakhsh2-87/+166
The trackpoint driver sets various parameter default values, all of which happen to be power-on defaults (Source: IBM TrackPoint Engineering Specification, Version 4.0. Also confirmed by empirical data). By sending the power-on reset command to reset all parameters to power-on state, we can skip the lengthy process of programming all parameters. In testing, ~2.5 secs of time writing parameters was reduced to .35 seconds waiting for power-on reset to complete. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-16Convert selectors of GENERIC_GPIO to GPIOLIBAlexandre Courbot1-1/+1
GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-15Input: ALPS - use %ph to print buffersDmitry Torokhov1-7/+5
This form is more concise. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-17Input: amimouse - use module_platform_driver_probe macroSachin Kamat1-13/+1
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-22Input: ALPS - add "Dolphin V1" touchpad supportDave Turvene2-2/+66
These touchpads use a different protocol; they have been seen on Dell N5110, Dell 17R SE, and others. The official ALPS driver identifies them by looking for an exact match on the E7 report: 73 03 50. Dolphin V1 returns an EC report of 73 01 xx (02 and 0d have been seen); Dolphin V2 returns an EC report of 73 02 xx (02 has been seen). Dolphin V2 probably needs a different initialization sequence and/or report parser, so it is left for a future commit. Signed-off-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-22Input: ALPS - remove unused argument to alps_enter_command_mode()Kevin Cernekee1-11/+7
Now that alps_identify() explicitly issues an EC report using alps_rpt_cmd(), we no longer need to look at the magic numbers returned by alps_enter_command_mode(). Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-22Input: cypress_ps2 - fix trackpadi found in Dell XPS12Kamal Mostafa1-6/+13
Avoid firmware glitch in Cypress PS/2 Trackpad firmware version 11 (as observed in Dell XPS12) which prevents driver from recognizing the trackpad. BugLink: http://launchpad.net/bugs/1103594 Signed-off-by: Kamal Mostafa <kamal@canonical.com> Cc: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-19Merge branch 'next' into for-linusDmitry Torokhov10-368/+2528
Prepare first set of updates for 3.9 merge window.
2013-02-15Input: synaptics - initialize pointer emulation usageHenrik Rydberg1-1/+1
To properly setup event parameters for emulated events, pass the appropriate flag to the slot initialization function. Also, all MT-related events should be setup before initialization. Incidentally, this solves the issue of doubly filtered pointer events. Reported-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - enable trackstick on Rushmore touchpadsKevin Cernekee1-70/+115
Separate out the common trackstick probe/setup sequences, then call them from each of the v3 init functions. Credits: Emmanual Thome furnished the information on the trackstick init and how it affected the report format. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - add support for "Rushmore" touchpadsKevin Cernekee1-0/+52
Rushmore touchpads are found on Dell E6230/E6430/E6530. They use the V3 protocol with slightly tweaked init sequences and report formats. The E7 report is 73 03 0a, and the EC report is 88 08 1d Credits: Emmanuel Thome reported the MT bitmap changes. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - make the V3 packet field decoder "pluggable"Kevin Cernekee2-44/+95
A number of different ALPS touchpad protocols can reuse alps_process_touchpad_packet_v3() with small tweaks to the bitfield decoding. Create a new priv->decode_fields() callback that handles the per-model differences. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - move pixel and bitmap info into alps_data structKevin Cernekee2-22/+33
Newer touchpads use different constants, so make them runtime- configurable. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - fix command mode checkKevin Cernekee1-1/+1
Pinnacle class devices should return "88 07 xx" or "88 08 xx" when entering command mode. If either the first byte or the second byte is invalid, return an error. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - rework detection of Pinnacle AGx touchpadsKevin Cernekee1-3/+12
The official ALPS driver uses the EC report, not the E7 report, to detect these devices. Also, they check for a range of values; the original table-based code only checked for two specific ones. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - move {addr,nibble}_command settings into alps_set_defaults()Kevin Cernekee1-8/+4
This allows alps_identify() to override these settings based on the device characteristics, if it is ever necessary. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - use function pointers for different protocol handlersKevin Cernekee2-54/+54
In anticipation of adding more ALPS protocols and more per-device quirks, use function pointers instead of switch statements to call functions that differ from one device to the next. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - rework detection sequenceKevin Cernekee2-76/+56
If the E6 report test passes, get the E7 and EC reports right away and then try to match an entry in the table. Pass in the alps_data struct, so that the detection code will be able to set operating parameters based on information found during detection. Change the version (psmouse->model) to report the protocol version only, in preparation for supporting models that do not show up in the ID table. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - introduce helper function for repeated commandsKevin Cernekee1-41/+30
Several ALPS driver init sequences repeat a command three times, then issue PSMOUSE_CMD_GETINFO to read the result. Move this into a helper function to simplify the code. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - move alps_get_model() down below hw_init codeKevin Cernekee1-93/+93
This will minimize the number of forward declarations needed when alps_get_model() starts assigning function pointers. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - copy "model" info into alps_data structKevin Cernekee2-34/+43
Not every type of ALPS touchpad is well-suited to table-based detection. Start moving the various alps_model_data attributes into the alps_data struct so that we don't need a unique table entry for every possible permutation of protocol version, flags, byte0/mask0, etc. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-14Input: ALPS - document the alps.h data structuresKevin Cernekee1-13/+61
Add kernel-doc markup. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Dave Turvene <dturvene@dahetral.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-13Input: cyapa - add support for smbus protocolBenson Leung1-5/+174
This patch adds support for the Cypress APA Smbus Trackpad type, which uses a modified register map that fits within the limitations of the smbus protocol. Devices that use this protocol include: CYTRA-116001-00 - Samsung Series 5 550 Chromebook trackpad CYTRA-103002-00 - Acer C7 Chromebook trackpad CYTRA-101003-00 - HP Pavilion 14 Chromebook trackpad Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Benson Leung <bleung@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-13Input: synaptics - fix 1->3 contact transition reportingDaniel Kurtz1-3/+27
Investigating the following gesture highlighted two slight implementation errors with choosing which slots to report in which slot when multiple contacts are present: Action SGM AGM (MTB slot:Contact) 1. Touch contact 0 (0:0) 2. Touch contact 1 (0:0, 1:1) 3. Lift contact 0 (1:1) 4. Touch contacts 2,3 (0:2, 1:3) In step 4, slot 1 was not being cleared first, which means the same tracking ID was being used for reporting both the old contact 1 and the new contact 3. This could result in "drumroll", where the old contact 1 would appear to suddenly jump to new finger 3 position. Similarly, if contacts 2 & 3 are not detected at the same sample, step 4 is split into two: Action SGM AGM (MTB slot:contact) 1. Touch contact 0 (0:0) 2. Touch contact 1 (0:0, 1:1) 3. Lift contact 0 (1:1) 4. Touch contact 2 (0:2, 1:1) 5. Touch contact 3 (0:2, 1:3) In this case, there was also a bug. In step 4, when contact 1 moves from SGM to AGM and contact 2 is first reported in SGM, slot 0 was actually empty. So slot 0 can be used to report the new SGM (contact 0), immediately. Since it was empty, contact 2 in slot 0 will get a new tracking ID. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-17Input: add driver for Cypress APA I2C TrackpadBenson Leung3-0/+817
This patch introduces a driver for Cypress All Points Addressable I2C Trackpad, including the ones in 2012 Samsung Chromebooks. This device is compatible with MT protocol type B, providing identifiable contacts. Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Benson Leung <bleung@chromium.org> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-17Input: add support for Cypress PS/2 TrackpadsDudley Du6-0/+960
This driver, submitted on behalf of Cypress Semiconductor Corporation and additional contributors, provides support for the Cypress PS/2 Trackpad. Original code contributed by Dudley Du (Cypress Semiconductor Corporation), modified by Kamal Mostafa and Kyle Fazzari. BugLink: http://launchpad.net/bugs/978807 Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Kyle Fazzari <git@status.e4ward.com> Signed-off-by: Mario Limonciello <mario_limonciello@dell.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Herton Krzesinski <herton.krzesinski@canonical.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-24Input: sentelic - only report position of first finger as ST coordinatesChristophe TORDEUX1-1/+1
Report only the position of the first finger as absolute non-MT coordinates, instead of reporting both fingers alternatively. Actual MT events are unaffected. This fixes horizontal and improves vertical scrolling with the touchpad. Cc: stable@vger.kernel.org Signed-off-by: Christophe TORDEUX <christophe@tordeux.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexitBill Pemberton5-5/+5
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitBill Pemberton5-5/+5
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexit_pBill Pemberton5-5/+5
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-08Merge tag 'v3.7-rc4' into next to sync up Wacom bitsDmitry Torokhov1-0/+21
Linux 3.7-rc4
2012-10-31Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds1-0/+21
Pull HID updates from Jiri Kosina: "This contains fixes for two devices by Jiri Slaby and Xianhan Yu, new device IDs for MacBook Pro 10,2 from Dirk Hohndel and generic multitouch code fix from Alan Cox." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Add support for the MacBook Pro 10,2 keyboard / touchpad HID: multitouch: fix maxcontacts problem on GeneralTouch HID: multitouch: put the case in the right switch statement HID: microsoft: fix invalid rdesc for 3k kbd
2012-10-31HID: Add support for the MacBook Pro 10,2 keyboard / touchpadDirk Hohndel1-0/+21
This enables the existing drivers for keyboard and touchpad with the new USB IDs found on the MBP 13" Reasonable Resolution (also known as the Retina Display). Added entries to both keyboard and mouse ignore lists. Signed-off-by: Dirk Hohndel <dirk@hohndel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-30Input: ALPS - print small buffers via %*phAndy Shevchenko1-6/+4
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-02Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds2-14/+26
Pull input updates from Dmitry Torokhov: "A few drivers were updated with device tree bindings and others got a few small cleanups and fixes." Fix trivial conflict in drivers/input/keyboard/omap-keypad.c due to changes clashing with a whitespace cleanup. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits) Input: wacom - mark Intuos5 pad as in-prox when touching buttons Input: synaptics - adjust threshold for treating position values as negative Input: hgpk - use %*ph to dump small buffer Input: gpio_keys_polled - fix dt pdata->nbuttons Input: Add KD[GS]KBDIACRUC ioctls to the compatible list Input: omap-keypad - fixed formatting Input: tegra - move platform data header Input: wacom - add support for EMR on Cintiq 24HD touch Input: s3c2410_ts - make s3c_ts_pmops const Input: samsung-keypad - use of_get_child_count() helper Input: samsung-keypad - use of_match_ptr() Input: uinput - fix formatting Input: uinput - specify exact bit sizes on userspace APIs Input: uinput - mark failed submission requests as free Input: uinput - fix race that can block nonblocking read Input: uinput - return -EINVAL when read buffer size is too small Input: uinput - take event lock when fetching events from buffer Input: get rid of MATCH_BIT() macro Input: rotary-encoder - add DT bindings Input: rotary-encoder - constify platform data pointers ...
2012-10-02Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds1-6/+1
Pull workqueue changes from Tejun Heo: "This is workqueue updates for v3.7-rc1. A lot of activities this round including considerable API and behavior cleanups. * delayed_work combines a timer and a work item. The handling of the timer part has always been a bit clunky leading to confusing cancelation API with weird corner-case behaviors. delayed_work is updated to use new IRQ safe timer and cancelation now works as expected. * Another deficiency of delayed_work was lack of the counterpart of mod_timer() which led to cancel+queue combinations or open-coded timer+work usages. mod_delayed_work[_on]() are added. These two delayed_work changes make delayed_work provide interface and behave like timer which is executed with process context. * A work item could be executed concurrently on multiple CPUs, which is rather unintuitive and made flush_work() behavior confusing and half-broken under certain circumstances. This problem doesn't exist for non-reentrant workqueues. While non-reentrancy check isn't free, the overhead is incurred only when a work item bounces across different CPUs and even in simulated pathological scenario the overhead isn't too high. All workqueues are made non-reentrant. This removes the distinction between flush_[delayed_]work() and flush_[delayed_]_work_sync(). The former is now as strong as the latter and the specified work item is guaranteed to have finished execution of any previous queueing on return. * In addition to the various bug fixes, Lai redid and simplified CPU hotplug handling significantly. * Joonsoo introduced system_highpri_wq and used it during CPU hotplug. There are two merge commits - one to pull in IRQ safe timer from tip/timers/core and the other to pull in CPU hotplug fixes from wq/for-3.6-fixes as Lai's hotplug restructuring depended on them." Fixed a number of trivial conflicts, but the more interesting conflicts were silent ones where the deprecated interfaces had been used by new code in the merge window, and thus didn't cause any real data conflicts. Tejun pointed out a few of them, I fixed a couple more. * 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits) workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending() workqueue: use cwq_set_max_active() helper for workqueue_set_max_active() workqueue: introduce cwq_set_max_active() helper for thaw_workqueues() workqueue: remove @delayed from cwq_dec_nr_in_flight() workqueue: fix possible stall on try_to_grab_pending() of a delayed work item workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback() workqueue: use __cpuinit instead of __devinit for cpu callbacks workqueue: rename manager_mutex to assoc_mutex workqueue: WORKER_REBIND is no longer necessary for idle rebinding workqueue: WORKER_REBIND is no longer necessary for busy rebinding workqueue: reimplement idle worker rebinding workqueue: deprecate __cancel_delayed_work() workqueue: reimplement cancel_delayed_work() using try_to_grab_pending() workqueue: use mod_delayed_work() instead of __cancel + queue workqueue: use irqsafe timer for delayed_work workqueue: clean up delayed_work initializers and add missing one workqueue: make deferrable delayed_work initializer names consistent workqueue: cosmetic whitespace updates for macro definitions workqueue: deprecate system_nrt[_freezable]_wq workqueue: deprecate flush[_delayed]_work_sync() ...
2012-10-01Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-01Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
2012-10-01Merge branch 'next' into for-linusDmitry Torokhov1-6/+3
Prepare first set of updates for 3.7 merge window.
2012-10-01Merge branches 'from-henrik', 'hidraw', 'logitech', 'picolcd', 'ps3', 'uclogic', 'wacom' and 'wiimote' into for-linusJiri Kosina1-0/+11
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.