aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/rmi4
AgeCommit message (Collapse)AuthorFilesLines
2016-07-19Input: synaptics-rmi4 - fix maximum size check for F12 control register 8Andrew Duggan1-4/+5
According to the RMI4 spec the maximum size of F12 control register 8 is 15 bytes. The current code incorrectly reports an error if control 8 is greater then 14. Making sensors with a control register 8 with 15 bytes unusable. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reported-by: Chris Healy <cphealy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-19Merge branch 'for-linus' into nextDmitry Torokhov1-2/+2
Sync up to bring in wacom_w8001 changes to avoid merge conflicts later.
2016-07-14Input: synaptics-rmi4 - use the RMI_F11_REL_BYTES define in rmi_f11_rel_pos_reportAndrew Duggan1-2/+2
The size of relative data in F11 is already defined by RMI_F11_REL_BYTES. Use the define in rmi_f11_rel_pos_report() to be consistent. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: synaptics-rmi4 - remove unneeded variableAndrew Duggan1-4/+1
Remove the data_base_addr_offset variable in rmi_f11_attention(). The f11 data is read as a single block so there is no need to store an offset to the data address. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: synaptics-rmi4 - remove pointer to rmi_function in f12_dataAndrew Duggan1-1/+0
The pointer to struct rmi_function in f12_data is never set and was never used. The fn pointer is also stored in rmi_2d_sensor which is a member of f12_data. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Input: synaptics-rmi4 - use of_get_child_by_name() to fix refcountAndrew Duggan1-2/+2
Calling of_find_node_by_name() assumes that the caller has incremented the refcount of the of_node being passed in. Currently, the caller is not incrementing the refcount of the of_node which results in the node being prematurely freed when of_find_node_by_name() calls of_node_put() on it. Instead use of_get_child_by_name() which does not call put on the of_node. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-13Input: synaptics-rmi4 - support regulator suppliesBjorn Andersson1-0/+46
Support the two supplies - vdd and vio - to make it possible to control power to the Synaptics chip. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-19Input: synaptics-rmi4 - fix spelling in definesNick Dyer1-11/+11
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-17Input: synaptics-rmi4 - remove check of Non-NULL arrayAndrew Duggan1-3/+2
Originally the irq_mask member of rmi_function was a pointer. Then it was switched to being a zero length array. However, the checks for a NULL pointer where not removed. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-15Input: synaptics-rmi4 - using logical instead of bitwise ANDDan Carpenter1-2/+2
There is a typo so we have && instead of &. Fixes: ff8f83708b3e ('Input: synaptics-rmi4 - add support for 2D sensors and F11') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add device tree support to the SPI transport driverAndrew Duggan1-1/+43
Add devicetree binding for SPI devices. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add SPI transport driverAndrew Duggan3-0/+557
Add the transport driver for devices using RMI4 over SPI. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add support for F30Andrew Duggan5-0/+421
RMI4 F30 supports input from clickpad buttons and controls LEDs located on the touchpad PCB. This patch adds support of the clickpad buttons and defers supporting LEDs for the future. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add support for F12Andrew Duggan5-0/+473
Function 12 implements 2D touch position sensor for newer Synaptics touch devices. It replaces F11 and no device will contain both functions. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add device tree support for 2d sensors and F11Andrew Duggan3-1/+117
2D sensors have several parameter which can be set in the platform data. This patch adds support for getting those values from devicetree. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add support for 2D sensors and F11Andrew Duggan7-1/+1641
RMI4 currently defines two functions for reporting data for 2D sensors (F11 and F12). This patch adds the common functionality which is shared by devices with 2D reporting along with implementing functionality for F11. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add device tree support for RMI4 I2C devicesAndrew Duggan5-5/+124
Add devicetree binding for I2C devices and add bindings for optional parameters in the function drivers. Parameters for function drivers are defined in child nodes for each of the functions. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add I2C transport driverAndrew Duggan3-0/+399
Add the transport driver for devices using RMI4 over I2C. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-10Input: synaptics-rmi4 - add support for Synaptics RMI4 devicesAndrew Duggan7-0/+2277
Synaptics uses the Register Mapped Interface (RMI) protocol as a communications interface for their devices. This driver adds the core functionality needed to interface with RMI4 devices. RMI devices can be connected to the host via several transport protocols and can supports a wide variety of functionality defined by RMI functions. Support for transport protocols and RMI functions are implemented in individual drivers. The RMI4 core driver uses a bus architecture to facilitate the various combinations of transport and function drivers needed by a particular device. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Christopher Heiny <cheiny@synaptics.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.