aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/tablet/wacom_wac.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-02-13Input: wacom - add support for DTH-2242Ping Cheng1-0/+1
It is a pen with 10 finger touch device. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-06Input: wacom - use new input-mt routinesPing Cheng1-1/+0
This patch brings wacom driver in-sync with input-mt changes made in release 3.7. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-08Input: wacom - add support for 2 new multi-touch tablets (0x100 and 0x101)Ping Cheng1-0/+2
This adds support for the two new multi-touch tablets. Signed-off-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25Input: wacom - add touch sensor support for Cintiq 24HD touchJason Gerecke1-0/+3
Decode multitouch reports from the touch sensor of the Cintiq 24HD touch. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-25Input: wacom - handle split-sensor devices with internal hubsJason Gerecke1-0/+2
Like our other pen-and-touch products, the Cintiq 24HD touch needs data to be shared between its two sensors to facilitate proximity-based palm rejection. Unlike other tablets that report sensor data through separate interfaces of the same USB device, the Cintiq 24HD touch has separate USB devices that are connected to an internal USB hub. This patch makes it possible to designate the USB VID/PID of the other device so that the two may share data. To ensure we don't accidentally link to a sensor from a physically separate device (if several have been plugged in), we limit the search to siblings (i.e., devices directly connected to the same hub). Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-24Input: wacom - add support to Cintiq 22HDPing Cheng1-1/+2
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-06-12Input: wacom - add two new devices (0xed and 0xef)Ping Cheng1-0/+2
0xed supports pen and one finger touch; 0xef is pen only. Signed-off-by: Ping Cheng <pingc@wacom.com> Acked-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-06-12Input: wacom - rearrange type enumPing Cheng1-3/+3
So we can simplify a few type related if statements Signed-off-by: Ping Cheng <pingc@wacom.com> Acked-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29Input: wacom - add 0xE5 (MT device) supportPing Cheng1-0/+8
Main part of patch is adding support for a new Wacom MT touch packet and labels these devices using MTSCREEN type. Other items of interest: Delete some duplicate code in HID parsing for Y info since its already done in X path. In wacom_query_tablet_data(), only invoke the set report that requests tablets to send Wacom Touch packets for Finger interfaces. Mostly, this is to make code intent clear. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29Input: wacom - retrieve maximum number of touch pointsPing Cheng1-0/+1
From the HID usage table when it is supported. Tested-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: wacom - add Intuos5 Touch Ring/ExpressKey supportJason Gerecke1-0/+1
Intuos5 uses a new report type for Touch Ring and ExpressKey data. Note that data from the capacitive sensors present on the ExpressKeys will be ignored until a proper way is found to expose it. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-04Input: wacom - add basic Intuos5 supportJason Gerecke1-0/+3
This patch adds support for the basic pen functions of Intuos5 tablets. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-25Input: wacom - wireless battery statusChris Bagwell1-0/+1
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-25Input: wacom - create inputs when wireless connectChris Bagwell1-0/+1
When a tablet connect or disconnect is detected, schedule work queue to register or unregister related input devices. When a wireless tablet connects, it reports same USB PID used if tablet is connected with USB cable. Use this to update features values, set input capabilities, and then register device. From there, the Pen and Touch interfaces will reuse the existing tablet's IRQ routines. Its possible that 1 receiver is shared with 2 tablets with different PID (small and medium Bamboo for example) so the input is unregister at disconnect to better support this case. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-25Input: wacom - wireless monitor frameworkChris Bagwell1-0/+4
The 3rd gen Bamboo Pen & Touch and Intuos5 tablets support an optional wireless module. When its receiver is plugged into USB, it presents 3 interfaces: 0) Monitor 1) Pen and 2) Touch. The exact capabilities of the Pen and Touch interfaces can not be determined until a tablet connection is established and reported over the Monitor interface. This patch detects this wireless receiver and enables interrupt packets to be processed for the Monitor interface. Processing the data in packets will be left to another patch. Since it doesn't make sense to create an input device for the Monitor interface, it is not created. Creation of Pen and Touch input device is also delayed until monitor packets can be processed. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Tested-by: Jason Gerecke <killertofu@gmail.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-31Input: wacom - use switch statement for wacom_tpc_irq()Ping Cheng1-0/+2
And add two new data formats. Tested-by: Chris Bagwell <chris@cnpbagwell.com> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: wacom - add support for Cintiq 24HDJason Gerecke1-0/+1
Adds support for the Cintiq 24HD. There are two quirks about this model that haven't been seen in prior tablets. First, a second touch ring is present on this display; it is being exposed via the ABS_THROTTLE axis. Second, three capacitive buttons at the top of the unit are available; though physically a touch strip, we report the use of these buttons with generic KEY_ events. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-26Input: wacom - 3rd gen Bamboo P&Touch packet supportChris Bagwell1-1/+2
3rd generation Bamboo Pen and Touch tablets reuse the older stylus packet but add an extra fixed zero pad byte to end. The touch packets are quite different since it supports tracking of up to 16 touches. The packet is 64-byte fixed size but contains up to 15 smaller messages indicating data for a single touch or for tablet button presses. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-26Input: wacom - read 3rd gen Bamboo Touch HID dataChris Bagwell1-0/+1
Override invalid pen based pktlen and x/y_max with touch values from HID report. Since active area of pen and touch are same on these devices, set physical x/y size while pen x/y_max and resolution are still valid. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-26Input: wacom - report resolution for pen devicesPing Cheng1-0/+2
Touch resolution is reported to the userland by retrieving the value from the HID descriptor. But pen resolution is not since it can not be retrieved. The current Wacom X driver has a resolution table. To centralize the source of these values, the resolution entries are added in the wacom_features struct for x and y coordinates respectively. The values are then reported to the userland. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wacom - support one finger touch the touchscreen wayPing Cheng1-0/+1
There are two types of 1FGT devices supported in wacom_wac.c. Changing them to follow the existing touchscreen format, i.e., only report BTN_TOUCH as a valid tool type. Touch data will be ignored if pen is in proximity. This requires a touch up event sent if touch was down when pen comes in. The touch up event should be sent before any pen events are emitted. Otherwise, two pointers would race for the cursor. However, we can not send a touch up inside wacom_tpc_pen since pen and touch are on different logical port. That is why we have to check if touch is up before sending pen events. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12Input: wacom - do not send 2FGT Tablet PC events in TAP formatPing Cheng1-3/+2
2FGT Tablet PC touch events were processed in _TAP_ format. Remove them so we can change to _MT_ format. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-12-16input: mt: Move tracking and pointer emulation to input-mtHenrik Rydberg1-4/+0
The drivers using the type B protocol all report tracking information the same way. The contact id is semantically equivalent to ABS_MT_SLOT, and the handling of ABS_MT_TRACKING_ID only complicates the driver. The situation can be improved upon by providing a common pointer emulation code, thereby removing the need for the tracking id in the driver. This patch moves all tracking event handling over to the input core, simplifying both the existing drivers and the ones currently in preparation. Acked-by: Ping Cheng <pingc@wacom.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2010-09-05Input: wacom - add a quirk for low resolution Bamboo devicesHenrik Rydberg1-0/+1
The Bamboo Touch reports a sub-screen resolution of 480x320. The signal-to-noise ratio is only about 100, so filtering is needed in order to reduce the jitter to a usable level. However, the low resolution leads to round-off errors in the EWMA filter, resulting in extremely jerky pointer motion. This patch explicitly sets a higher resolution for those devices, and tells this to the completion handler via a low-resolution quirk. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05Input: wacom - add support for the Bamboo Touch trackpadHenrik Rydberg1-0/+4
Add support for the Bamboo Touch trackpad, and make it work with both the Synaptics X Driver and the Multitouch X Driver. The device uses MT slots internally, so the choice of protocol is a given. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05Input: wacom - collect device quirks into single functionHenrik Rydberg1-0/+4
Collect device-specific code into a single function, and use quirks to flag specific behavior instead. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05Input: wacom - parse the Bamboo device familyPing Cheng1-0/+2
The Bamboo devices have multiple interfaces which need to be setup separately. Use the HID parsing mechanism to achieve that. Signed-off-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05Input: wacom - add fuzz parameters to featuresHenrik Rydberg1-0/+4
The signal-to-noise ratio varies between devices, but currently all devices are treated the same way. Add fuzz parameters to the feature struct, allowing for tailored treatment of devices. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-28Input: wacom - add support for DTU2231 and DTU1631Ping Cheng1-0/+1
Add support for the two new devices: DTU2231 and DTU1631. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-04Input: wacom - add Cintiq 21UX2 and Intuos4 WLPing Cheng1-0/+1
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-13Input: wacom - streamline 2-finger touch supportPing Cheng1-2/+3
Clean up 2-finger touch support. This still needs to be converted to proper multi-touch protocol. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-13Input: wacom - get rid of input event wrappersDmitry Torokhov1-0/+1
Input event interface is pretty stable so let's get rig of wrappers for input_event() and fiends and call them directly. This will simplify and speed up code a bit. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-13Input: wacom - do not allocate wacom_wac separatelyDmitry Torokhov1-0/+2
There is no reason for allocating struct wacom_wac separately from struct wacom since both have the same lifetime rules and are not shared. Also make 'open' field a boolean. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-13Input: wacom - share pen info with touch of the same IDPing Cheng1-0/+5
Touch enbaled devices share the same product ID with pen. However, we do not want to post touch events while pen is in prox. To do so, we used to keep a local static variable to keep track of if pen is in prox or not. This works fine for Tablet PC devices since there is only one device attached. With the newer touch enabled regular tablets, we can not make this assumption any more, i.e, one system may have more than one identical tablet plugged in. This patch adds an new entry, shared, into the struct wacom_wac so touch data can access pen data to locally. This solution assumes the two tools (touch and pen) of the same ID will be probed one after the other without interruption in between by another Wacom device of the same ID.
2010-03-01Input: wacom - replace WACOM_PKGLEN_PENABLEDPing Cheng1-1/+0
Replacing WACOM_PKGLEN_PENABLED with WACOM_PKGLEN_GRAPHIRE since they both represent the same value, 8. This value will be used for both Tablet PC and Bamboo with touch devices. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-20Input: wacom - add device type to device name stringPing Cheng1-3/+4
Devices supporting both pen and touch features share the same product ID, but presented as 2 separate input devices. By adding device type to device name string we can help userspace applications and users differentiate between them. 'Finger' is used for the touch since touch has been used as a suffix by userland hotplugging services. Signed-off-by: Jason Childs <oblivian@users.sourceforge.net> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-19Input: wacom - use per-device instance of wacom_featuresJason Childs1-5/+5
Since we mangle data in wacom_features when dealing with certain devices let's use a private (per-device) instance of wacom_features in wacom_wac. This way same product ID can support more than one type of device, such as pen and touch, and not interfere with each other. Signed-off-by: Jason Childs <oblivian@users.sourceforge.net> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15Input: wacom - add defines for data packet report IDsPing Cheng1-0/+8
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15Input: wacom - add support for new LCD tabletsPing Cheng1-2/+8
This adds support for the foolowing Wacom devices: - 0x9F - a single touch only LCD tablet; - 0xE2 - a two finger touch only LCD tablet; - 0xE3 - a two finger touch, penabled LCD tablet. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15Input: wacom - add defines for packet lengths of various devicesPing Cheng1-0/+11
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-08Input: wacom - add support for Intuos4 tabletsPing Cheng1-0/+3
Signed-oof-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-11-26Input: wacom - add support for new USB Tablet PCsPing Cheng1-0/+4
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14Input: wacom - add support for Bamboo1, BambooFun, and Cintiq 12WXPing Cheng1-0/+1
Add support for new wacom tablets - Bamboo1, BambooFun, and Cintiq 12WX Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wacom - add support for the new Bamboo tabletsPing Cheng1-0/+1
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-08Input: move USB tablets under drivers/input/tabletDmitry Torokhov1-0/+49
This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.