aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/touchscreen/atmel_mxt_ts.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-09-10Input: atmel_mxt_ts - fix double free of input deviceStephen Warren1-5/+13
[Nick Dyer: reworked to move free of input device into separate function and only call in paths that require it.] Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-09Input: atmel_mxt_ts - downgrade warning about empty interruptsNick Dyer1-1/+6
In the case where the CHG/interrupt line mode is not configured correctly, this warning is output to dmesg output for each interrupt. Downgrade the message to debug. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-13Input: atmel_mxt_ts - fix a few issues reported by CoverityDmitry Torokhov1-6/+11
This should fix the following issues reported by Coverity: *** CID 1230625: Logically dead code (DEADCODE) /drivers/input/touchscreen/atmel_mxt_ts.c: 1692 in mxt_initialize() *** CID 1230627: Missing break in switch (MISSING_BREAK) /drivers/input/touchscreen/atmel_mxt_ts.c: 1436 in mxt_get_object_table() *** CID 1230629: Out-of-bounds write (OVERRUN) /drivers/input/touchscreen/atmel_mxt_ts.c: 1267 in mxt_update_cfg() *** CID 1230632: Unused pointer value (UNUSED_VALUE) /drivers/input/touchscreen/atmel_mxt_ts.c: 1211 in mxt_update_cfg() Acked-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-13Input: atmel_mxt_ts - split config update a bitDmitry Torokhov1-125/+145
Let's split config update code a bit so it is hopefully a bit easier to read. Also, the firmware update callback should be the entity releasing firmware blob, not lower layers. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
2014-08-13Input: atmel_mxt_ts - simplify mxt_initialize a bitDmitry Torokhov1-39/+42
I think having control flow with 2 goto/labels/flags is quite hard to read, this version is a bit more readable IMO. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
2014-08-07Input: atmel_mxt_ts - mXT224 DMA quirk was fixed in firmware v2.0.AANick Dyer1-3/+5
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: atmel_mxt_ts - use deep sleep mode when stoppedNick Dyer1-26/+73
By writing zero to both the active and idle cycle times the maXTouch device is put into a deep sleep mode when it consumes minimal power. It is unnecessary to change the configuration of any other objects (for example to disable T9 touchscreen). It is counterproductive to reset the chip on resume, it will result in a long delay. However it is necessary to issue a calibrate command after the chip has spent any time in deep sleep. This patch also deals with the situation where the power configuration is zero on probe, which would mean that the device never wakes up to execute commands. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - implement T44 message handlingNick Dyer1-32/+159
maXTouch chips allow the reading of multiple messages in a single I2C transaction, which reduces bus overhead and improves performance/latency. The number of messages available to be read is given by the value in the T44 object which is located directly before the T5 object. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - split message handler into separate functionsNick Dyer1-59/+64
This is in preparation for support of the T44 message count object. Also, cache T5 address to avoid lookup on every interrupt cycle. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - decode T6 status messagesNick Dyer1-20/+40
By storing the previous T6 status byte multiple debug output of the same status can be suppressed (for example CFGERR). Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - add support for dynamic message sizeNick Dyer1-52/+68
The T5 object may have various sizes depending on the objects used on the particular maXTouch chip and firmware version, therefore it can't be hardcoded in the driver. Allocate a buffer on probe instead. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - recover from bootloader on probeNick Dyer1-17/+50
The MXT device may be in bootloader mode on probe, due to: 1) APP CRC failure, either: a) flash corruption b) bad power or other intermittent problem while checking CRC 2) If the device has been reset 10 or more times without accessing comms 3) Warm probe, device was in bootloader mode already This code attempts to recover from 1(b) and 3. There is an additional complexity: we have to try two possible bootloader addresses because the mapping is not one-to-one and we don't know the exact model yet. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - add bootloader addresses for new chipsNick Dyer1-0/+6
Later chips (for example mXT1664S) different mappings for bootloader addresses. This means that we must look at the family ID to determine which address to use. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - handle bootloader previously unlockedNick Dyer1-9/+18
On a warm probe, the device might be in a state where an flash operation was not completed. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - handle APP_CRC_FAIL on startupNick Dyer1-10/+43
If the bootloader on the touchscreen controller fails to initialise the firmware image, it stays in bootloader mode and reports a failure. It is possible to reflash a working firmware image from this state. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - calculate and check CRC in config fileNick Dyer1-55/+177
By validating the checksum, we can identify if the configuration is corrupt. In addition, this patch writes the configuration in a short series of block writes rather than as many individual values. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - download device config using firmware loaderNick Dyer1-74/+204
The existing implementation which encodes the configuration as a binary blob in platform data is unsatisfactory since it requires a kernel recompile for the configuration to be changed, and it doesn't deal well with firmware changes that move values around on the chip. Atmel define an ASCII format for the configuration which can be exported from their tools. This patch implements a parser for that format which loads the configuration via the firmware loader and sends it to the MXT chip. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - implement device tree supportStephen Warren1-5/+63
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - set pointer emulation on touchpadsBenson Leung1-5/+6
Touchpads are pointers, so make sure to pass the correct values to input_mt_report_pointer_emulation(). Without this, tap-to-click doesn't work. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - move input device init into separate functionNick Dyer1-84/+107
It is useful to initialise the input device later: - Screen parameters may not be not known yet, for instance if waiting for firmware loader to return. - Device may be in bootloader mode on probe (but could still be recovered by firmware download). In addition, later devices have a different touchscreen object (T100) which requires handling differently. This also reduces the complexity of the probe function. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - initialise IRQ before probingNick Dyer1-39/+62
The maXTouch chips use the CHG line to generate status events in bootloader mode, and during configuration download, before there is enough information to configure the input device. Therefore set up the interrupt handler earlier. However, this introduces states where parts of the interrupt processing must not run. Use data->object_table as a way to tell whether the chip information is valid, and data->input_dev as a way to tell whether it is valid to generate input report. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-06-07Input: atmel_mxt_ts - fix invalid return from mxt_get_bootloader_versionNick Dyer1-1/+1
The patch e57a66aa8534: "Input: atmel_mxt_ts - read and report bootloader version" from May 18, 2014, leads to the following static checker warning: drivers/input/touchscreen/atmel_mxt_ts.c:437 mxt_get_bootloader_version() warn: signedness bug returning '(-5)' drivers/input/touchscreen/atmel_mxt_ts.c 429 static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val) 430 { 431 struct device *dev = &data->client->dev; 432 u8 buf[3]; 433 434 if (val & MXT_BOOT_EXTENDED_ID) { 435 if (mxt_bootloader_read(data, &buf[0], 3) != 0) { 436 dev_err(dev, "%s: i2c failure\n", __func__); 437 return -EIO; ^^^^ This gets truncated into a number from 0-255 and anyway the caller doesn't check for errors. (reported by Dan Carpenter) Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: atmel_mxt_ts - handle multiple input reports in one messageNick Dyer1-8/+28
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: atmel_mxt_ts - rename touchscreen defines to include T9Nick Dyer1-23/+23
This avoids confusion with the newer T100 touchscreen object. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: atmel_mxt_ts - rename pressure to amplitude to match specNick Dyer1-4/+4
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-26Input: atmel_mxt_ts - read screen config from chipNick Dyer1-71/+65
By reading the touchscreen configuration from the settings that the maXTouch chip is actually using, we can remove some platform data. The matrix size is not used for anything, and results in some rather confusing code to re-read it because it may change when configuration is downloaded, so don't print it out. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - add check for incorrect firmware file formatNick Dyer1-0/+29
Atmel supplies firmware files in ASCII HEX format (.enc) which must be converted before they can be loaded by kernel driver. Try to detect the error and print a friendly error message rather than feeding junk to the bootloader. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - improve bootloader progress outputNick Dyer1-1/+7
By implementing a frame counter, print out fewer debug messages (the firmware may contain hundreds of frames). Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - implement bootloader frame retriesNick Dyer1-7/+20
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - read and report bootloader versionNick Dyer1-0/+26
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - add additional bootloader addressesNick Dyer1-45/+93
Move bootloaders reads/writes into separate functions. Instead of switching client->addr, define new field bootloader_addr in mxt_data. Implement lookup calculation for bootloader addresses. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - implement CRC check for configuration dataNick Dyer1-8/+52
The configuration is stored in NVRAM on the maXTouch chip. When the device is reset it reports a CRC of the stored configuration values. Therefore it isn't necessary to send the configuration on each probe - we can check the CRC matches and avoid a timeconsuming backup/reset cycle. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - improve error reporting and debugNick Dyer1-10/+23
- Add error messages for probe errors - Report type in invalid object type - Tweak some other debug output messages Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - make wait-after-reset period compatible with all chipsIiro Valkonen1-22/+87
The delay before the chip can be accessed after reset varies between different chips in maXTouch family. Waiting for an interrupt and a T6 status message with the RESET bit set is a better behaviour. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - wait for CHG after bootloader resetsBenson Leung1-7/+15
Rather than msleep for MXT_RESET_TIME and MXT_FWRESET_TIME during the transition to bootloader mode and the transition back from app, wait for the CHG assert to indicate that the transition is done. This change replaces the msleep with a wait for completion that the mxt_interrupt handler signals. Also add CHG poll after last firmware frame - some bootloader versions will assert the interrupt line after the final frame, in testing this meant that the driver attempts to read the info block too early whilst the chip is still resetting. This improves firmware update time as we no longer wait longer than necessary for each reset. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloaderBenson Leung1-21/+81
The driver should not immediately read bootloader status when in Application Update Mode. The CHG line will assert when the device has made a state transition and is ready to report a new status via i2c. This change adds a wait for completion in mxt_check_bootloader, and changes the mxt_interrupt handler to signal the completion. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - define helper functions for size and instancesDaniel Kurtz1-12/+25
These two object table entry fields are reported 1 less than their value. When used, however, we always want the actual size and instances. To keep the object size and instances 1-byte fields, and thus preserve the object-table struct's 6-byte packed alignment, add some convenient accessor functions that do the +1 every time these fields are accessed. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - return IRQ_NONE when interrupt handler failsNick Dyer1-2/+1
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - improve T19 GPIO keys handlingNick Dyer1-27/+17
* The mapping of the GPIO numbers into the T19 status byte varies between different maXTouch chips. Some have up to 7 GPIOs. Allowing a keycode array of up to 8 items is simpler and more generic. So replace #define with configurable number of keys which also allows the removal of is_tp. * Rename platform data parameters to include "t19" to prevent confusion with T15 key array. * Probe aborts early on when pdata is NULL, so no need to check. * Move "int i" to beginning of function (mixed declarations and code) * Use API calls rather than __set_bit() * Remove unused dev variable. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-05-18Input: atmel_mxt_ts - remove unnecessary platform dataNick Dyer1-50/+0
It is not necessary to download these values to the maXTouch chip on every probe, since they are stored in NVRAM. It makes life difficult when tuning the device to keep them in sync with the config array/file, and requires a new kernel build for minor tweaks. These parameters only represent a tiny subset of the available configuration options, tracking all of these options in platform data would be a endless task. In addition, different versions of maXTouch chips may have these values in different places or may not even have them at all. Having these values also makes life more complex for device tree and other platforms where having to define a static configuration isn't helpful. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-06Input: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-06Input: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-03-09Atmel MXT touchscreen: increase reset timeoutsLinus Torvalds1-2/+2
There is a more complete atmel patch-series out by Nick Dyer that fixes this and other things, but in the meantime this is the minimal thing to get the touchscreen going on (at least my) Pixel Chromebook. Not that I want my dirty fingers near that beautiful screen, but it seems that a non-initialized touchscreen will also end up being a constant wakeup source, so you have to disable it to go to sleep. And it's easier to just fix the initialization sequence. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-08Input: atmel_mxt_ts - Support for touchpad variantDaniel Kurtz1-2/+62
This same driver can be used by atmel based touchscreens and touchpads (buttonpads). Platform data may specify a device is a touchpad using the is_tp flag. This will cause the driver to perform some touchpad specific initializations, such as: * register input device name "Atmel maXTouch Touchpad" instead of Touchscreen. * register BTN_LEFT & BTN_TOOL_* event types. * register axis resolution (as a fixed constant, for now) * register BUTTONPAD property * process GPIO buttons using reportid T19 Input event GPIO mapping is done by the platform data key_map array. key_map[x] should contain the KEY or BTN code to send when processing GPIOx from T19. To specify a GPIO as not an input source, populate with KEY_RESERVED, or 0. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-24Input: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-04Input: atmel_mxt_ts - simplify mxt_dump_messageAndy Shevchenko1-4/+2
Use %*ph format specifier to print small buffer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-09-19Input: MT - Add flags to input_mt_init_slots()Henrik Rydberg1-1/+1
Preparing to move more repeated code into the mt core, add a flags argument to the input_mt_slots_init() function. Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: Ping Cheng <pingc@wacom.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-07-07Pull input changes from Henrik Rydberg, including large update toDmitry Torokhov1-222/+241
atmel_mxt_ts driver by Daniel and MT protocol addition for win8 devices. Conflicts: drivers/input/touchscreen/atmel_mxt_ts.c
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.