aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/touchscreen (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-03-23Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-0/+3
Pull input fixes from Dmitry Torokhov: "Fixes to various USB drivers to validate existence of endpoints before trying to use them, fixes to APLS v8 protocol, and a couple of i8042 quirks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ALPS - fix trackstick button handling on V8 devices Input: ALPS - fix V8+ protocol handling (73 03 28) Input: sur40 - validate number of endpoints before using them Input: kbtab - validate number of endpoints before using them Input: hanwang - validate number of endpoints before using them Input: yealink - validate number of endpoints before using them Input: ims-pcu - validate number of endpoints before using them Input: cm109 - validate number of endpoints before using them Input: iforce - validate number of endpoints before using them Input: elan_i2c - add ASUS EeeBook X205TA special touchpad fw Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list Input: synaptics-rmi4 - prevent null pointer dereference in f30 Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000
2017-03-16Input: sur40 - validate number of endpoints before using themJohan Hovold1-0/+3
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory that lie beyond the end of the endpoint array should a malicious device lack the expected endpoints. Fixes: bdb5c57f209c ("Input: add sur40 driver for Samsung SUR40... ") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 3.13 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-27lib/vsprintf.c: remove %Z supportAlexey Dobriyan1-31/+31
Now that %z is standartised in C99 there is no reason to support %Z. Unlike %L it doesn't even make format strings smaller. Use BUILD_BUG_ON in a couple ATM drivers. In case anyone didn't notice lib/vsprintf.o is about half of SLUB which is in my opinion is quite an achievement. Hopefully this patch inspires someone else to trim vsprintf.c more. Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-20Merge branch 'next' into for-linusDmitry Torokhov29-786/+339
Prepare input updates for 4.11 merge window.
2017-02-20Input: zet6223 - export OF device ID as module aliasesJavier Martinez Canillas1-0/+1
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Before this patch: $ modinfo drivers/input/touchscreen/zet6223.ko | grep alias alias: i2c:zet6223 After this patch: $ modinfo drivers/input/touchscreen/zet6223.ko | grep alias alias: of:N*T*Czeitec,zet6223C* alias: of:N*T*Czeitec,zet6223 alias: i2c:zet6223 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-12Input: tsc2004/5 - switch to using generic device propertiesDmitry Torokhov1-63/+30
Instead of supporting legacy platform data (of which we have no mainline users) and OF-based properties, let's switch to generic device properties. This will still allow legacy boards to use the driver (by defining property sets and attaching them to the drivers) and will simplify probe and make driver usable on ACPI-based systems as well. Reviewed-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-12Input: tsc2004/5 - fix regulator handlingDmitry Torokhov1-12/+7
In case of an optional regulator missing, regulator core will return ERR_PTR(-ENOENT) and not NULL, so the check for missing regulator is incorrect. Also, the regulator is not optional, it may simply be missing from platform description, so let's use devm_regulator_get() and rely on regulator core to give us dummy supply when real one is not available. Fixes: d257f2980feb ("Input: tsc2005 - convert to gpiod") Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-12Input: tsc2005 - add OF device tableDmitry Torokhov1-1/+11
To be prepared for SPI module loading using full compatible strings from device tree, let's add OF module device table data. Reviewed-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-09Input: add driver for Zeitec ZET6223Jelle van der Waa3-0/+279
This is a basic driver for the Zeitec ZET6223 I2C touchscreen controllers. The driver does not support firmware loading, which is not required for all tablets which contain this chip. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-24Merge tag 'v4.10-rc5' into nextDmitry Torokhov2-3/+3
Sync up with mainline to bring up improvements in various subsystems.
2017-01-24Input: wm97xx - make missing platform data non-fatalManuel Lauss1-1/+1
Commit 6480af4915d6 ("power_supply: wm97xx_battery: use power_supply_get_drvdata") made wm97xx platform data mandatory, although it's still optional. This patch fixes an oops during driver probe on one of my MIPS boards with a wm9712. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: touchscreen - drop unnecessary calls to input_set_drvdataGuenter Roeck6-9/+0
Since there is no call to dev_get_drvdata() or input_get_drvdata(), the call to input_set_drvdata() is unnecessary and can be dropped. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-22Input: max11801_ts - drop call to input_set_drvdata()Dmitry Torokhov1-1/+0
Nobody calls input_get_drvdata() so setting it is not required. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: touchscreen - drop unnecessary calls to device_init_wakeupGuenter Roeck5-7/+0
Calling device_init_wakeup in the remove function is unnecessary since the device is going away, and thus won't be able to cause any wakeups under any circumstances. Besides, the driver cleanup code already handles the necessary cleanup. Similarly, disabling wakeup in the probe error path is unnecessary, as is disabling wakeup in the probe function in the first place. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: touchscreen - use local variables consistentlyGuenter Roeck6-8/+7
If a function declares a variable to access a structure element, use it consistently. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-21Input: touchscreen - drop calls to platform_set_drvdata and i2c_set_clientdataGuenter Roeck5-8/+0
There is no call to i2c_get_clientdata(), platform_get_drvdata(), or dev_get_drvdata() in any of the drivers in this patch. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: sis_i2c - drop unnecessary call to i2c_set_clientdataGuenter Roeck1-1/+0
There is no call to i2c_get_clientdata() or dev_get_drvdata(). Drop the unnecessary call to i2c_set_clientdata(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: eeti_ts - drop goto to return statementGuenter Roeck1-3/+1
Replace 'goto l; ... l: return e;' with 'return e;' Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: atmel-wm97xx - drop unnecessary error messagesGuenter Roeck1-3/+1
Error messages after memory allocation failures are unnecessary and can be dropped, especially give that they were emitted as dev_dbg() so noone except person actively debugging the driver would see them. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-18Input: ar1021_i2c - drop unnecessary call to i2c_set_clientdataGuenter Roeck1-1/+0
There is no call to i2c_get_clientdata() or dev_get_drvdata(). Drop the unnecessary call to i2c_set_clientdata(). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-13Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-2/+2
Pull input updates from Dmitry Torokhov: "Small driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elants_i2c - avoid divide by 0 errors on bad touchscreen data Input: adxl34x - make it enumerable in ACPI environment Input: ALPS - fix TrackStick Y axis handling for SS5 hardware Input: synaptics-rmi4 - fix F03 build error when serio is module Input: xpad - use correct product id for x360w controllers Input: synaptics_i2c - change msleep to usleep_range for small msecs Input: i8042 - add Pegatron touchpad to noloop table Input: joydev - remove unused linux/miscdevice.h include
2017-01-06Input: intel-mid-touch - remove driverAndy Shevchenko3-667/+0
The Moorestown support was removed by commit 1a8359e411eb ("x86/mid: Remove Intel Moorestown"). Remove this leftover. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-06Input: edt_ft5x06 - change msleep to usleep_range for small msecsAniroop Mathur1-2/+2
msleep(1~20) may not do what the caller intends, and will often sleep longer (~20 ms actual sleep for any value given in the 1~20ms range). This is not the desired behaviour for many cases like device resume time, device suspend time, device enable time, retry logic, etc. Thus, change msleep to usleep_range for precise wakeups. Signed-off-by: Aniroop Mathur <a.mathur@samsung.com> Acked-by: Simon Budig <simon.budig@kernelconcepts.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-05Input: elants_i2c - avoid divide by 0 errors on bad touchscreen dataGuenter Roeck1-2/+2
The following crash may be seen if bad data is received from the touchscreen. [ 2189.425150] elants_i2c i2c-ELAN0001:00: unknown packet ff ff ff ff [ 2189.430738] divide error: 0000 [#1] PREEMPT SMP [ 2189.434679] gsmi: Log Shutdown Reason 0x03 [ 2189.434689] Modules linked in: ip6t_REJECT nf_reject_ipv6 rfcomm evdi uinput uvcvideo cmac videobuf2_vmalloc videobuf2_memops snd_hda_codec_hdmi i2c_dev videobuf2_core snd_soc_sst_cht_bsw_rt5645 snd_hda_intel snd_intel_sst_acpi btusb btrtl btbcm btintel bluetooth snd_soc_sst_acpi snd_hda_codec snd_intel_sst_core snd_hwdep snd_soc_sst_mfld_platform snd_hda_core snd_soc_rt5645 memconsole_x86_legacy memconsole zram snd_soc_rl6231 fuse ip6table_filter iwlmvm iwlwifi iwl7000_mac80211 cfg80211 iio_trig_sysfs joydev cros_ec_sensors cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf industrialio snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun [ 2189.434866] CPU: 0 PID: 106 Comm: irq/184-ELAN000 Tainted: G W 3.18.0-13101-g57e8190 #1 [ 2189.434883] Hardware name: GOOGLE Ultima, BIOS Google_Ultima.7287.131.43 07/20/2016 [ 2189.434898] task: ffff88017a0b6d80 ti: ffff88017a2bc000 task.ti: ffff88017a2bc000 [ 2189.434913] RIP: 0010:[<ffffffffbecc48d5>] [<ffffffffbecc48d5>] elants_i2c_irq+0x190/0x200 [ 2189.434937] RSP: 0018:ffff88017a2bfd98 EFLAGS: 00010293 [ 2189.434948] RAX: 0000000000000000 RBX: ffff88017a967828 RCX: ffff88017a9678e8 [ 2189.434962] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000000 [ 2189.434975] RBP: ffff88017a2bfdd8 R08: 00000000000003e8 R09: 0000000000000000 [ 2189.434989] R10: 0000000000000000 R11: 000000000044a2bd R12: ffff88017a991800 [ 2189.435001] R13: ffffffffbe8a2a53 R14: ffff88017a0b6d80 R15: ffff88017a0b6d80 [ 2189.435011] FS: 0000000000000000(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000 [ 2189.435022] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2189.435030] CR2: 00007f678d94b000 CR3: 000000003f41a000 CR4: 00000000001007f0 [ 2189.435039] Stack: [ 2189.435044] ffff88017a2bfda8 ffff88017a9678e8 646464647a2bfdd8 0000000006e09574 [ 2189.435060] 0000000000000000 ffff88017a088b80 ffff88017a921000 ffffffffbe8a2a53 [ 2189.435074] ffff88017a2bfe08 ffffffffbe8a2a73 ffff88017a0b6d80 0000000006e09574 [ 2189.435089] Call Trace: [ 2189.435101] [<ffffffffbe8a2a53>] ? irq_thread_dtor+0xa9/0xa9 [ 2189.435112] [<ffffffffbe8a2a73>] irq_thread_fn+0x20/0x40 [ 2189.435123] [<ffffffffbe8a2be1>] irq_thread+0x14e/0x222 [ 2189.435135] [<ffffffffbee8cbeb>] ? __schedule+0x3b3/0x57a [ 2189.435145] [<ffffffffbe8a29aa>] ? wake_threads_waitq+0x2d/0x2d [ 2189.435156] [<ffffffffbe8a2a93>] ? irq_thread_fn+0x40/0x40 [ 2189.435168] [<ffffffffbe87c385>] kthread+0x10e/0x116 [ 2189.435178] [<ffffffffbe87c277>] ? __kthread_parkme+0x67/0x67 [ 2189.435189] [<ffffffffbee900ac>] ret_from_fork+0x7c/0xb0 [ 2189.435199] [<ffffffffbe87c277>] ? __kthread_parkme+0x67/0x67 [ 2189.435208] Code: ff ff eb 73 0f b6 bb c1 00 00 00 83 ff 03 7e 13 49 8d 7c 24 20 ba 04 00 00 00 48 c7 c6 8a cd 21 bf eb 4d 0f b6 83 c2 00 00 00 99 <f7> ff 83 f8 37 75 15 48 6b f7 37 4c 8d a3 c4 00 00 00 4c 8d ac [ 2189.435312] RIP [<ffffffffbecc48d5>] elants_i2c_irq+0x190/0x200 [ 2189.435323] RSP <ffff88017a2bfd98> [ 2189.435350] ---[ end trace f4945345a75d96dd ]--- [ 2189.443841] Kernel panic - not syncing: Fatal exception [ 2189.444307] Kernel Offset: 0x3d800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 2189.444519] gsmi: Log Shutdown Reason 0x02 The problem was seen with a 3.18 based kernel, but there is no reason to believe that the upstream code is safe. Fixes: 66aee90088da2 ("Input: add support for Elan eKTH I2C touchscreens") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-12-17Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds5-25/+141
Pull input subsystem updates from Dmitry Torokhov: - updated support for Synaptics RMI4 devices, including support for SMBus controllers, firmware update support, sensor tuning, and PS/2 guest support - ALPS driver now supports tracksticks on SS5 controllers - i8042 now uses chassis info to skip selftest on Asus laptops as list of individual models became too unwieldy - miscellaneous fixes to other drivers * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (67 commits) Input: imx6ul_tsc - generalize the averaging property Input: drv260x - use generic device properties Input: drv260x - use temporary for &client->dev Input: drv260x - fix input device's parent assignment Input: synaptics-rmi4 - add support for F34 V7 bootloader Input: drv260x - fix initializing overdrive voltage Input: ALPS - fix protcol -> protocol Input: i8042 - comment #else/#endif of CONFIG_PNP Input: lpc32xx-keys - fix invalid error handling of a requested irq Input: synaptics-rmi4 - fix debug for sensor clip Input: synaptics-rmi4 - store the attn data in the driver Input: synaptics-rmi4 - allow to add attention data Input: synaptics-rmi4 - f03 - grab data passed by transport device Input: synaptics-rmi4 - add support for F03 Input: imx6ul_tsc - convert int to u32 Input: imx6ul_tsc - add mask when set REG_ADC_CFG Input: synaptics-rmi4 - have only one struct platform data Input: synaptics-rmi4 - remove EXPORT_SYMBOL_GPL for internal functions Input: synaptics-rmi4 - remove mutex calls while updating the firmware Input: drv2667 - fix misuse of regmap_update_bits ...
2016-12-15Merge branch 'synaptics-rmi4' into nextDmitry Torokhov3-34/+638
Merge updated Synaptics RMI4 support, including support for SMBus controllers and flashing firmware.
2016-12-15Input: imx6ul_tsc - generalize the averaging propertyGuy Shapiro1-11/+27
Make the avarage-samples property a general touchscreen property rather than imx6ul device specific. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: imx6ul_tsc - convert int to u32Guy Shapiro1-21/+21
The code uses of_property_read_u32 and expects positive values. However, the values are stored in signed int variables. Additionally, the registers values are also stored in signed variables without a good reason (readl/writel expect u32). The only time this caused a real bug was in the new average-samples property, in which the property is numerically compared and implicitly expected to be positive. I believe it's better to change all the properties and registers to u32, for consistency and warnings reduction. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Reported-by: Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-30Input: imx6ul_tsc - add mask when set REG_ADC_CFGHaibo Chen1-1/+10
Add mask of each function bits of REG_ADC_CFG, and clear these function bits first, otherwise use '|=' operation may get the wrong setting which depends on the original value of REG_ADC_CFG. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-27Input: imx6ul_tsc - add support for sample averagingGuy Shapiro1-0/+18
The i.MX6UL internal touchscreen controller contains an option to average upon samples. This feature reduces noise from the produced touch locations. This patch adds sample averaging support to the imx6ul_tsc device driver. Signed-off-by: Guy Shapiro <guy.shapiro@mobi-wize.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-23power_supply: wm97xx_battery: use power_supply_get_drvdataRobert Jarzmik1-1/+1
As the power supply framework provides a way to store and retrieve private supply data, use it. In the process, change the platform data for wm97xx_battery from a container of a single struct wm97xx_batt_pdata to the direct point to wm97xx_batt_pdata. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-11-16Input: raydium_i2c_ts - fix spelling mistake in dev_err messageColin Ian King1-1/+1
Trivial fix to spelling mistake "failied" to "failed" in dev_err message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-16Input: silead - add regulator supportHans de Goede1-0/+29
On some tablets the touchscreen controller is powered by separate regulators, add support for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-11-08Input: melfas_mip4 - add product ID reportingSangwon Jee1-1/+2
Add reporting product ID through input_id. Signed-off-by: Sangwon Jee <jeesw@melfas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-26Input: fsl-imx25-tcq - fix module autoload when registered via OFJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/input/touchscreen/fsl-imx25-tcq.ko | grep alias After this patch: $ modinfo drivers/input/touchscreen/fsl-imx25-tcq.ko | grep alias alias: of:N*T*Cfsl,imx25-tcqC* alias: of:N*T*Cfsl,imx25-tcq Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-26Input: melfas_mip4 - use product id for firmware nameSangwon Jee1-3/+9
Use product id for firmware name to request compatible firmware. Signed-off-by: Sangwon Jee <jeesw@melfas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-21Input: melfas_mip4 - add product_id sysfs attributeSangwon Jee1-2/+38
Add product_id sysfs attribute and update protocol version to support it. Signed-off-by: Sangwon Jee <jeesw@melfas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-14Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-2/+36
Pull some more input subsystem updates from Dmitry Torokhov: "An update to the ALPS driver to support the V8 protocol with touchstick, a change for i8042 to skip selftest on many Asus laptops which helps to keep their touchpads working after resume, and a couple other driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - skip selftest on ASUS laptops Input: melfas_mip4 - add ic_name sysfs attribute Input: melfas_mip4 - add maintainer information Input: melfas_mip4 - add devicetree binding documentations Input: elantech - add Fujitsu Lifebook E556 to force crc_enabled Input: synaptics-rmi4 - fix error handling in I2C transport driver Input: synaptics-rmi4 - fix error handling in SPI transport driver Input: ALPS - add V8 protocol documentation Input: ALPS - set DualPoint flag for 74 03 28 devices Input: ALPS - allow touchsticks to report pressure Input: ALPS - handle 0-pressure 1F events Input: ALPS - add touchstick support for SS5 hardware Input: elantech - force needed quirks on Fujitsu H760 Input: elantech - fix Lenovo version typo
2016-10-13Merge tag 'v4.8' into nextDmitry Torokhov11-48/+48
Sync up with mainline to bring in I2C host notify changes and other updates.
2016-10-13Merge branch 'next' into for-linusDmitry Torokhov1-2/+36
Prepare second round of input updates for 4.9 merge window.
2016-10-11Input: melfas_mip4 - add ic_name sysfs attributeSangwon Jee1-2/+36
Add ic_name sysfs attribute for retrieving IC model name. Signed-off-by: Sangwon Jee <jeesw@melfas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-10-11Merge tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds3-34/+638
Pull media updates from Mauro Carvalho Chehab: - Documentation improvements: conversion of all non-DocBook documents to Sphinx and lots of fixes to the uAPI media book - New PCI driver for Techwell TW5864 media grabber boards - New SoC driver for ATMEL Image Sensor Controller - Removal of some obsolete SoC drivers (s5p-tv driver and soc_camera drivers) - Addition of ST CEC driver - Lots of drivers fixes, improvements and additions * tag 'media/v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits) [media] ttusb_dec: avoid the risk of go past buffer [media] cx23885: Fix some smatch warnings [media] si2165: switch to regmap [media] si2165: use i2c_client->dev instead of i2c_adapter->dev for logging [media] si2165: Remove legacy attach [media] cx231xx: attach si2165 driver via i2c_client [media] cx231xx: Prepare for attaching new style i2c_client DVB demod drivers [media] cx23885: attach si2165 driver via i2c_client [media] si2165: support i2c_client attach [media] si2165: avoid division by zero [media] rcar-vin: add R-Car gen2 fallback compatibility string [media] lgdt3306a: remove 20*50 msec unnecessary timeout [media] cx25821: Remove deprecated create_singlethread_workqueue [media] cx25821: Drop Freeing of Workqueue [media] cxd2841er: force 8MHz bandwidth for DVB-C if specified bw not supported [media] redrat3: hardware-specific parameters [media] redrat3: remove hw_timeout member [media] cxd2841er: BER and SNR reading for ISDB-T [media] dvb-usb: avoid link error with dib3000m{b,c| [media] dvb-usb: split out common parts of dibusb ...
2016-10-07Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds11-390/+403
Pull input subsystem updates from Dmitry Torokhov: "You will get - a new driver for Elan eKTF2127 touchscreen controllers - a new "gpio-decoder" driver to read and report state of several GPIO lines - an ADC resistor ladder driver - the ft6326 driver is removed because edt-ft5x06 handles the same devices just fine. .. plus the regular slew of driver fixes/enhancements" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits) Input: elan_i2c - fix return tests of i2c_smbus_read_block_data() Input: ektf2127 - mark PM functions as __maybe_unused Input: snvs_pwrkey - drop input_free_device call if input_register_device fails Input: add support for Elan eKTF2127 touchscreen controller Input: serio - add hangup support Input: tps65218-pwrbutton - add support for tps65217 variant Input: jornada720_ts - get rid of mach/irqs.h and mach/hardware.h includes Input: jornada720_kbd - remove unneeded mach/hardware.h include Input: focaltech - mark focaltech_set_resolution() static Input: wdt87xx_i2c - fix the flash erase issue Input: gpio-keys-polled - don't use unit-address with button nodes Input: add generic input driver to read encoded GPIO lines Input: add ADC resistor ladder driver Input: pegasus_notetaker - directly include workqueue header Input: elants_i2c - get product id on recovery mode for FW update Input: wm97xx - remove deprecated create_singletheread_workqueue Input: mc13783_ts - remove deprecated create_singletheread_workqueue Input: psmouse - remove deprecated create_singletheread_workqueue Input: jornada720_kbd - switch to using dev_dbg Input: jornada720_kbd - get rid of mach/irqs.h include ...
2016-10-05Merge tag 'v4.8' into patchworkMauro Carvalho Chehab2-9/+10
Linux 4.8 * tag 'v4.8': (1761 commits) Linux 4.8 ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7 MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems include/linux/property.h: fix typo/compile error ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock() mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page() MAINTAINERS: Switch to kernel.org email address for Javi Merino x86/entry/64: Fix context tracking state warning when load_gs_index fails x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID x86/vdso: Fix building on big endian host x86/boot: Fix another __read_cr4() case on 486 sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock sctp: change to check peer prsctp_capable when using prsctp polices sctp: remove prsctp_param from sctp_chunk sctp: move sent_count to the memory hole in sctp_chunk tg3: Avoid NULL pointer dereference in tg3_io_error_detected() x86/init: Fix cr4_init_shadow() on CR4-less machines MIPS: Fix detection of unsupported highmem with cache aliases MIPS: Malta: Fix IOCU disable switch read for MIPS64 MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS ...
2016-10-03Merge branch 'next' into for-linusDmitry Torokhov11-390/+403
Prepare first round of input updates for 4.9 merge window.
2016-10-03Input: ektf2127 - mark PM functions as __maybe_unusedArnd Bergmann1-2/+2
The newly added ektf2127 driver uses the SIMPLE_DEV_PM_OPS macro to conditionally refer to the resume/suspend functions, which causes a warning when CONFIG_PM_SLEEP is disabled: drivers/input/touchscreen/ektf2127.c:168:12: error: 'ektf2127_resume' defined but not used [-Werror=unused-function] drivers/input/touchscreen/ektf2127.c:156:12: error: 'ektf2127_suspend' defined but not used [-Werror=unused-function] We could either put these functions inside of an #ifdef or add __maybe_unused annotations. This uses the second approach, which is generally more foolproof. Fixes: 9ca5bf5029b6 ("Input: add support for Elan eKTF2127 touchscreen controller") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-26Input: add support for Elan eKTF2127 touchscreen controllerSiebren Vroegindeweij3-0/+349
This adds a driver for the Elan eKTF2127 touchscreen controller, which speaks an i2c protocol which is distinctly different from the already supported eKTH controllers. Signed-off-by: Michel Verlaan <michel.verl@gmail.com> Signed-off-by: Siebren Vroegindeweij <siebren.vroegindeweij@hotmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-23Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-7/+9
Pull input updates from Dmitry Torokhov: "Just a fix up for the firmware handling to the Silead driver (which is a new driver in this release)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: silead_gsl1680 - use "silead/" prefix for firmware loading Input: silead_gsl1680 - document firmware-name, fix implementation
2016-09-19[media] Input: v4l-touch - add copyright linesNick Dyer1-0/+1
Add copyright lines for Zodiac who paid for the V4L touch work. Signed-off-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19[media] Input: atmel_mxt: disallow impossible configurationArnd Bergmann1-1/+2
The newnly added debug mode for the atmel_mxt_ts driver relies on the v4l2 interface and vb2_vmalloc, but those might be configured as loadable modules when the driver itself is built-in, resulting in a link failure: drivers/input/touchscreen/atmel_mxt_ts.o: In function `mxt_vidioc_querycap': atmel_mxt_ts.c:(.text.mxt_vidioc_querycap+0x10): undefined reference to `video_devdata' drivers/input/touchscreen/atmel_mxt_ts.o: In function `mxt_buffer_queue': atmel_mxt_ts.c:(.text.mxt_buffer_queue+0x20): undefined reference to `vb2_plane_vaddr' atmel_mxt_ts.c:(.text.mxt_buffer_queue+0x164): undefined reference to `vb2_buffer_done' drivers/input/touchscreen/atmel_mxt_ts.o: In function `mxt_free_object_table': atmel_mxt_ts.c:(.text.mxt_free_object_table+0x18): undefined reference to `video_unregister_device' atmel_mxt_ts.c:(.text.mxt_free_object_table+0x20): undefined reference to `v4l2_device_unregister' The best workaround I could come up with is to disallow the debug mode unless it's actually possible to call it. Fixes: ecfdd7e2660e ("[media] Input: atmel_mxt_ts - output diagnostic debug via V4L2 device") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nick Dyer <nick@shmanahar.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.