aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-04-13rtnetlink: Do not generate notifications for PRECHANGEUPPER eventDavid Ahern1-1/+0
PRECHANGEUPPER is an internal event; do not generate userspace notifications. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rtnetlink: Do not generate notifications for POST_TYPE_CHANGE eventDavid Ahern1-1/+0
Changing the master device for a link generates many messages; the one generated for POST_TYPE_CHANGE is redundant: [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master br1 state UNKNOWN group default link/ether 02:02:02:02:02:03 brd ff:ff:ff:ff:ff:ff [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue master br1 state UNKNOWN group default link/ether 02:02:02:02:02:03 brd ff:ff:ff:ff:ff:ff Remove POST_TYPE_CHANGE from the list of notifiers that generate notifications. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rtnetlink: Do not generate notifications for CHANGEADDR eventDavid Ahern1-1/+0
Changing hardware address generates redundant messages: [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default link/ether 02:02:02:02:02:02 brd ff:ff:ff:ff:ff:ff [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default link/ether 02:02:02:02:02:02 brd ff:ff:ff:ff:ff:ff Do not send a notification for the CHANGEADDR notifier. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rtnetlink: Do not generate notification for UDP_TUNNEL_PUSH_INFODavid Ahern1-1/+0
NETDEV_UDP_TUNNEL_PUSH_INFO is an internal notifier; nothing userspace can do so don't generate a netlink notification. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13rtnetlink: Do not generate notifications for MTU eventsDavid Ahern1-2/+0
Changing MTU on a link currently causes 3 messages to be sent to userspace: [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1490 qdisc noqueue state UNKNOWN group default link/ether f2:52:5c:6d:21:f3 brd ff:ff:ff:ff:ff:ff [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default link/ether f2:52:5c:6d:21:f3 brd ff:ff:ff:ff:ff:ff [LINK]11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default link/ether f2:52:5c:6d:21:f3 brd ff:ff:ff:ff:ff:ff Remove the messages sent for PRE_CHANGE_MTU and CHANGE_MTU netdev events. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13tools: bpf_jit_disasm: Add option to dump JIT image to a file.David Daney1-4/+36
When debugging the JIT on an embedded platform or cross build environment, libbfd may not be available, making it impossible to run bpf_jit_disasm natively. Add an option to emit a binary image of the JIT code to a file. This file can then be disassembled off line. Typical usage in this case might be (pasting mips64 dmesg output to cat command): $ cat > jit.raw $ bpf_jit_disasm -f jit.raw -O jit.bin $ mips64-linux-gnu-objdump -D -b binary -m mips:isa64r2 -EB jit.bin Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: stmmac: set total length of the packet to be transmitted in TDES3Niklas Cassel7-12/+17
Field FL/TPL in register TDES3 is not correctly set on GMAC4. TX appears to be functional on GMAC 4.10a even if this field is not set, however, to avoid relying on undefined behavior, set the length in TDES3. The field has a different meaning depending on if the TSE bit in TDES3 is set or not (TSO). However, regardless of the TSE bit, the field is not optional. The field is already set correctly when the TSE bit is set. Since there is no limit for the number of descriptors that can be used for a single packet, the field should be set to the sum of the buffers contained in: [<desc with First Descriptor bit set> ... <desc n> ... <desc with Last Descriptor bit set>], which should be equal to skb->len. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13cxgb4: save tid while creating server filterGanesh Goudar1-0/+4
Save the filter tid while creating the server filter, which is used later to retrieve the corresponding filter instance while handling the filter reply. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201Daniele Palmas1-1/+1
Telit LE920A4 uses the same pid 0x1201 of LE920, but modem implementation is different, since it requires DTR to be set for answering to qmi messages. This patch replaces QMI_FIXED_INTF with QMI_QUIRK_SET_DTR: tests on LE920 have been performed in order to verify backward compatibility. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13Revert "ACPICA: Resources: Not a valid resource if buffer length too long"Rafael J. Wysocki1-12/+5
Revert commit 57707a9a7780 (ACPICA: Resources: Not a valid resource if buffer length too long) as it is reported to prevent the TPM module from loading on Lenovo X60 with Coreboot. It also causes new confusing warnings to show up in the kernel log. Link: https://bugzilla.kernel.org/show_bug.cgi?id=195311 Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-13CIFS: Fix SMB3 mount without specifying a security mechanismPavel Shilovsky1-1/+3
Commit ef65aaede23f ("smb2: Enforce sec= mount option") changed the behavior of a mount command to enforce a specified security mechanism during mounting. On another hand according to the spec if SMB3 server doesn't respond with a security context it implies that it supports NTLMSSP. The current code doesn't keep it in mind and fails a mount for such servers if no security mechanism is specified. Fix this by indicating that a server supports NTLMSSP if a security context isn't returned during negotiate phase. This allows the code to use NTLMSSP by default for SMB3 mounts. Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com>
2017-04-13net: mvmdio: allow up to three clocks to be specified for orion-mdioRussell King1-9/+24
Allow up to three clocks to be specified and enabled for the orion-mdio interface, which are required for this interface to be accessible on Armada 8k platforms. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13dt-bindings: allow up to three clocks for orion-mdioRussell King1-1/+1
Armada 8040 needs three clocks to be enabled for MDIO accesses to work. Update the binding to allow the extra clocks to be specified. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: mvmdio: disable interrupt if resource size is too smallRussell King1-0/+6
Disable the MDIO interrupt, falling back to polled mode, if the resource size does not allow us to access the interrupt registers. All current DT bindings use a size of 0x84, which allows access, but verifying it is good practice. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13dt-bindings: correct marvell orion MDIO binding documentRussell King1-2/+15
Correct the Marvell Orion MDIO binding document to properly reflect the cases where an interrupt is present. Augment the examples to show this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: mvmdio: fix interrupt disable in remove pathRussell King1-1/+2
The pre-existing write to disable interrupts on the remove path happens whether we have an interrupt or not. While this may seem to be a good idea, this driver is re-used in many different implementations, some where the binding only specifies four bytes of register space. This access causes us to access registers outside of the binding. Make it conditional on the interrupt being present, which is the same condition used when enabling the interrupt in the first place. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: mvmdio: disable interrupts in driver failure pathRussell King1-0/+2
When the mvmdio driver has an interrupt, it enables the "done" interrupt after requesting its interrupt handler. However, probe failure results in the interrupt being left enabled. Disable it on the failure path. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13cpupower: Fix turbo frequency reporting for pre-Sandy Bridge coresBen Hutchings1-0/+1
The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both flags set and an assumed base clock of 100 MHz for turbo values. Reported-by: GSR <gsr.bugs@infernal-iceberg.com> Tested-by: GSR <gsr.bugs@infernal-iceberg.com> References: https://bugs.debian.org/859978 Fixes: 8fb2e440b223 (cpupower: Show Intel turbo ratio support via ...) Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-13x86/efi: Don't try to reserve runtime regionsOmar Sandoval1-0/+4
Reserving a runtime region results in splitting the EFI memory descriptors for the runtime region. This results in runtime region descriptors with bogus memory mappings, leading to interesting crashes like the following during a kexec: general protection fault: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1 #53 Hardware name: Wiwynn Leopard-Orv2/Leopard-DDR BW, BIOS LBM05 09/30/2016 RIP: 0010:virt_efi_set_variable() ... Call Trace: efi_delete_dummy_variable() efi_enter_virtual_mode() start_kernel() ? set_init_arg() x86_64_start_reservations() x86_64_start_kernel() start_cpu() ... Kernel panic - not syncing: Fatal exception Runtime regions will not be freed and do not need to be reserved, so skip the memmap modification in this case. Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: <stable@vger.kernel.org> # v4.9+ Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Dave Young <dyoung@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 8e80632fb23f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()") Link: http://lkml.kernel.org/r/20170412152719.9779-2-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-13ACPI / scan: Set the visited flag for all enumerated devicesRafael J. Wysocki1-7/+12
Commit 10c7e20b2ff3 (ACPI / scan: fix enumeration (visited) flags for bus rescans) attempted to fix a problem with ACPI-based enumerateion of I2C/SPI devices, but it forgot to ensure that the visited flag will be set for all of the other enumerated devices, so fix that. Fixes: 10c7e20b2ff3 (ACPI / scan: fix enumeration (visited) flags for bus rescans) Link: https://bugzilla.kernel.org/show_bug.cgi?id=194885 Reported-and-tested-by: Kevin Locke <kevin@kevinlocke.name> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: 4.8+ <stable@vger.kernel.org> # 4.8+
2017-04-13cpufreq: Bring CPUs up even if cpufreq_online() failedChen Yu1-2/+16
There is a report that after commit 27622b061eb4 ("cpufreq: Convert to hotplug state machine"), the normal CPU offline/online cycle fails on some platforms. According to the ftrace result, this problem was triggered on platforms using acpi-cpufreq as the default cpufreq driver, and due to the lack of some ACPI freq method (eg. _PCT), cpufreq_online() failed and returned a negative value, so the CPU hotplug state machine rolled back the CPU online process. Actually, from the user's perspective, the failure of cpufreq_online() should not prevent that CPU from being brought up, although cpufreq might not work on that CPU. BTW, during system startup cpufreq_online() is not invoked via CPU online but by the cpufreq device creation process, so the APs can be brought up even though cpufreq_online() fails in that stage. This patch ignores the return value of cpufreq_online/offline() and lets the cpufreq framework deal with the failure. cpufreq_online() itself will do a proper rollback in that case and if _PCT is missing, the ACPI cpufreq driver will print a warning if the corresponding debug options have been enabled. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194581 Fixes: 27622b061eb4 ("cpufreq: Convert to hotplug state machine") Reported-and-tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.9+ <stable@vger.kernel.org> # 4.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-12tools/power turbostat: update version numberLen Brown1-1/+1
Signed-off-by: Len Brown <len.brown@intel.com>
2017-04-12tools/power turbostat: fix impossibly large CPU%c1 valueLen Brown1-1/+1
Most CPUs do not have a hardware c1 counter, and so turbostat derives c1 residency: c1 = TSC - MPERF - other_core_cstate_counters As it is not possible to atomically read these coutners, measurement jitter can case this calcuation to "go negative" when very close to 0. Turbostat detect that case and simply prints c1 = 0.00% But that check neglected to account for systems where the TSC crystal clock domain and the MPERF BCLK domain are differ by a small amount. That allowed very small negative c1 numbers to escape this check and be printed as huge positve numbers. This code begs for a bit of cleanup, but this patch is the minimal change to fix the issue. Signed-off-by: Len Brown <len.brown@intel.com>
2017-04-12tools/power turbostat: turbostat.8 add missing column definitionsDoug Smythies1-0/+2
Add GFX%rc6 and GFXMHz to the column descriptions section of the turbostat man page. Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Len Brown <len.brown@intel.com>
2017-04-12tools/power turbostat: update HWP dump to decimal from hexLen Brown1-3/+3
Syntax only. The HWP CAPABILTIES and REQUEST ratios are more easily viewed in decimal -- just multiply by 100 and you get MHz... new: cpu0: MSR_HWP_CAPABILITIES: 0x010c1b23 (high 35 guar 27 eff 12 low 1) cpu0: MSR_HWP_REQUEST: 0x80002301 (min 1 max 35 des 0 epp 0x80 window 0x0 pkg 0x0) old: cpu0: MSR_HWP_CAPABILITIES: 0x010c1b23 (high 0x23 guar 0x1b eff 0xc low 0x1) cpu0: MSR_HWP_REQUEST: 0x80002301 (min 0x1 max 0x23 des 0x0 epp 0x80 window 0x0 pkg 0x0) Signed-off-by: Len Brown <len.brown@intel.com>
2017-04-12tools/power turbostat: enable package THERM_INTERRUPT dumpLen Brown1-6/+2
cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00641400 (100 C) cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x884b0800 (25 C) cpu0: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C) Enable the same per-core output, but hide it behind --debug because it is too verbose on big systems. Signed-off-by: Len Brown <len.brown@intel.com>
2017-04-12tools/power turbostat: show missing Core and GFX power on SKL and KBLLen Brown1-1/+3
While the current SDM is silent on the matter, the Core and GFX RAPL power meters on SKL and KBL appear to work -- so show them. Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2017-04-12mm: Tighten x86 /dev/mem with zeroing readsKees Cook2-41/+82
Under CONFIG_STRICT_DEVMEM, reading System RAM through /dev/mem is disallowed. However, on x86, the first 1MB was always allowed for BIOS and similar things, regardless of it actually being System RAM. It was possible for heap to end up getting allocated in low 1MB RAM, and then read by things like x86info or dd, which would trip hardened usercopy: usercopy: kernel memory exposure attempt detected from ffff880000090000 (dma-kmalloc-256) (4096 bytes) This changes the x86 exception for the low 1MB by reading back zeros for System RAM areas instead of blindly allowing them. More work is needed to extend this to mmap, but currently mmap doesn't go through usercopy, so hardened usercopy won't Oops the kernel. Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com> Tested-by: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2017-04-12net: make struct net_device::min_header_len 8-bitAlexey Dobriyan1-1/+1
This field is never big enough to warrant 16-bitness. 8-bit accesses enjoy shorted encoding on i386/x86_64 than 16-bit accesses: add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-10 (-10) function old new delta loopback_setup 169 164 -5 ether_setup 148 143 -5 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12net: neigh: make ->hh_len 32-bitAlexey Dobriyan2-4/+3
Using 16-bit ->hh_len doesn't save any memory, save some .text instead: add/remove: 0/0 grow/shrink: 1/6 up/down: 2/-19 (-17) function old new delta neigh_update 2312 2314 +2 fwnet_header_cache 199 197 -2 eth_header_cache 101 99 -2 ip6_finish_output2 2371 2368 -3 vrf_finish_output6 1522 1518 -4 vrf_finish_output 1413 1409 -4 ip_finish_output2 1627 1623 -4 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12gso: Support frag_list splitting with head_fragIlan Tayari1-1/+1
A driver may use build_skb() for received packets. These SKBs then have a head_frag. Since commit d7e8883cfcf4 ("net: make GRO aware of skb->head_frag"), GRO may build frag_list SKBs out of head_frag received SKBs. In such a case, the chained SKBs end up with a head_frag. Commit 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") adds partial segmentation of frag_list SKB chains into individual SKBs. However, this is not done if the chained SKBs have any linear part, because the device may not be able to DMA the private linear buffer. A chained frag_list SKB with head_frag is wrongfully detected in this case as having a private linear part and thus falls back to software GSO, while in fact the linear part is backed by a DMA page just like any other frag. This causes low performance when forwarding those packets that were built with build_skb() Allow partial segmentation at the frag_list pointer for chained SKBs with head_frag. Note that such SKBs can only be created by GRO, when applied to received packets with head_frag. Also note that this change only affects the data path that performs the partial segmentation at frag_list pointer, and not any of the other more common data paths. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ipv6: Fix idev->addr_list corruptionRabin Vincent1-4/+7
addrconf_ifdown() removes elements from the idev->addr_list without holding the idev->lock. If this happens while the loop in __ipv6_dev_get_saddr() is handling the same element, that function ends up in an infinite loop: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [test:1719] Call Trace: ipv6_get_saddr_eval+0x13c/0x3a0 __ipv6_dev_get_saddr+0xe4/0x1f0 ipv6_dev_get_saddr+0x1b4/0x204 ip6_dst_lookup_tail+0xcc/0x27c ip6_dst_lookup_flow+0x38/0x80 udpv6_sendmsg+0x708/0xba8 sock_sendmsg+0x18/0x30 SyS_sendto+0xb8/0xf8 syscall_common+0x34/0x58 Fixes: 6a923934c33 (Revert "ipv6: Revert optional address flusing on ifdown.") Signed-off-by: Rabin Vincent <rabinv@axis.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12drm/etnaviv: fix missing unlock on error in etnaviv_gpu_submit()Wei Yongjun1-1/+2
Add the missing unlock before return from function etnaviv_gpu_submit() in the error handling case. lst: fixed label name. Fixes: f3cd1b064f11 ("drm/etnaviv: (re-)protect fence allocation with GPU mutex") CC: stable@vger.kernel.org #4.9+ Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2017-04-12l2tp: define parameters of l2tp_tunnel_find*() as "const"Guillaume Nault2-4/+4
l2tp_tunnel_find() and l2tp_tunnel_find_nth() don't modify "net". Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12l2tp: define parameters of l2tp_session_get*() as "const"Guillaume Nault2-5/+7
Make l2tp_pernet()'s parameter constant, so that l2tp_session_get*() can declare their "net" variable as "const". Also constify "ifname" in l2tp_session_get_by_ifname(). Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12net: xdp: don't export dev_change_xdp_fd()Johannes Berg1-1/+0
Since dev_change_xdp_fd() is only used in rtnetlink, which must be built-in, there's no reason to export dev_change_xdp_fd(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Set default ring sizes to 128 entriesBenjamin Herrenschmidt1-2/+2
I haven't seen any improvement above that size on the machines I've tested with. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Make ring sizes configurable via ethtoolBenjamin Herrenschmidt1-56/+148
We set an arbitrary max at 1024 since we pre-allocate the actual descriptor arrays and skb arrays to the full size to keep the code a bit simpler and avoid allocation failures in the reset task. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Add more register inits in ftgmac100_init_hw()Benjamin Herrenschmidt1-0/+36
Clear stale interrupts on entry, configure FIFO sizes, set FIFO thresholds, configure interrupt mitigation. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Open code remaining register writesBenjamin Herrenschmidt1-33/+20
The helpers just take space but don't provide much value. Simple one line comments are more explanatory. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Rename ftgmac100_setup_mac to ftgmac100_initial_macBenjamin Herrenschmidt1-2/+2
To remove more confusion. This function is about obtaining the initial MAC address at driver probe time. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Rename ftgmac100_set_mac to ftgmac100_write_mac_addrBenjamin Herrenschmidt1-3/+3
To avoid confusion with the ndo callback and generally be clearer about the purpose of that function Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Set netdev->hw_featuresBenjamin Herrenschmidt1-3/+4
So features can be turned on/off via ethtool Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Disable HW checksum generation on AST2400, enable on othersBenjamin Herrenschmidt3-10/+6
We found out that HW checksum generation only works from AST2500 onward. This disables it on AST2400 and removes the "no-hw-checksum" properties in the device-trees. The problem we had wasn't related to NC-SI. Also rework the logic testing for that property so it can be used to disable HW checksum generation and checking regardless of whether NC-SI is used or not in case other variants out there need this. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Use device "compatible" property, not machine.Benjamin Herrenschmidt3-11/+13
We test for aspeed chips to handle a couple of special cases, but we do that by checking the machine type which isn't right. Instead check the actual device compatible property. This also updates the dtsi files for the aspeed SoC to match. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Upgrade to NETIF_F_HW_CSUMBenjamin Herrenschmidt1-15/+25
The documentation describes NETIF_F_IP_CSUM as deprecated so let's switch to NETIF_F_HW_CSUM and use the helper to handle unhandled protocols. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: do not use IB_SEND_INLINE together with mapped dataUrsula Braun2-2/+1
smc specifies IB_SEND_INLINE for IB_WR_SEND ib_post_send calls, but provides a mapped buffer to be sent. This is inconsistent, since IB_SEND_INLINE works without mapped buffer. Problem has not been detected in the past, because tests had been limited to Connect X3 cards from Mellanox, whose mlx4 driver just ignored the IB_SEND_INLINE flag. For now, the IB_SEND_INLINE flag is removed. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: destruct non-accepted socketsUrsula Braun2-6/+9
Make sure sockets never accepted are removed cleanly. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: remove duplicate unhashUrsula Braun1-1/+0
unhash is already called in sock_put_work. Remove the second call. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-11net/smc: guarantee ConnClosed send after shutdown SHUT_WRUrsula Braun1-11/+25
State SMC_CLOSED should be reached only, if ConnClosed has been sent to the peer. If ConnClosed is received from the peer, a socket with shutdown SHUT_WR done, switches errorneously to state SMC_CLOSED, which means the peer socket is dangling. The local SMC socket is supposed to switch to state APPFINCLOSEWAIT to make sure smc_close_final() is called during socket close. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.