| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since the sysfs attribute hangs off the RMI bus, which doesn't go away during
firmware flash, it needs to be explicitly removed, otherwise we would try and
register the same attribute twice.
This reverts commit 36a44af5c176d619552d99697433261141dd1296.
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The newer trackpoints from ALPS, Elan and NXP implement a very limited
subset of extended commands and controls that the original trackpoints
implemented, so we should not be exposing not working controls in sysfs.
The newer trackpoints also do not implement "Power On Reset" or "Read
Extended Button Status", so we should not be using these commands during
initialization.
While we are at it, let's change "unsigned char" to u8 for byte data or
bool for booleans and use better suited error codes instead of -1.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Lenovo introduced trackpoint compatible sticks with minimum PS/2 commands.
They supposed to reply with 0x02, 0x03, or 0x04 in response to the
"Read Extended ID" command, so we would know not to try certain extended
commands. Unfortunately even some trackpoints reporting the original IBM
version (0x01 firmware 0x0e) now respond with incorrect data to the "Get
Extended Buttons" command:
thinkpad_acpi: ThinkPad BIOS R0DET87W (1.87 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad E470, model 20H1004SGE
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 0/0
Since there are no trackpoints without buttons, let's assume the trackpoint
has 3 buttons when we get 0 response to the extended buttons query.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196253
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Adds support for the current lineup of Xbox One controllers from PDP
(Performance Designed Products). These controllers are very picky with
their initialization sequence and require an additional 2 packets before
they send any input reports.
Signed-off-by: Mark Furneaux <mark@furneaux.ca>
Reviewed-by: Cameron Gutman <aicommander@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Replace the original license statement with the SPDX identifier.
Update also the copyright owner adding myself as co-owner of the
copyright.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
KASAN found a UAF due to dangling pointer. As the report below says,
rmi_f11_attention() accesses drvdata->attn_data.data, which was freed in
rmi_irq_fn.
[ 311.424062] BUG: KASAN: use-after-free in rmi_f11_attention+0x526/0x5e0 [rmi_core]
[ 311.424067] Read of size 27 at addr ffff88041fd610db by task irq/131-i2c_hid/1162
[ 311.424075] CPU: 0 PID: 1162 Comm: irq/131-i2c_hid Not tainted 4.15.0-rc8+ #2
[ 311.424076] Hardware name: Razer Blade Stealth/Razer, BIOS 6.05 01/26/2017
[ 311.424078] Call Trace:
[ 311.424086] dump_stack+0xae/0x12d
[ 311.424090] ? _atomic_dec_and_lock+0x103/0x103
[ 311.424094] ? show_regs_print_info+0xa/0xa
[ 311.424099] ? input_handle_event+0x10b/0x810
[ 311.424104] print_address_description+0x65/0x229
[ 311.424108] kasan_report.cold.5+0xa7/0x281
[ 311.424117] rmi_f11_attention+0x526/0x5e0 [rmi_core]
[ 311.424123] ? memcpy+0x1f/0x50
[ 311.424132] ? rmi_f11_attention+0x526/0x5e0 [rmi_core]
[ 311.424143] ? rmi_f11_probe+0x1e20/0x1e20 [rmi_core]
[ 311.424153] ? rmi_process_interrupt_requests+0x220/0x2a0 [rmi_core]
[ 311.424163] ? rmi_irq_fn+0x22c/0x270 [rmi_core]
[ 311.424173] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core]
[ 311.424177] ? free_irq+0xa0/0xa0
[ 311.424180] ? irq_finalize_oneshot.part.39+0xeb/0x180
[ 311.424190] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core]
[ 311.424193] ? irq_thread_fn+0x3d/0x80
[ 311.424197] ? irq_finalize_oneshot.part.39+0x180/0x180
[ 311.424200] ? irq_thread+0x21d/0x290
[ 311.424203] ? irq_thread_check_affinity+0x170/0x170
[ 311.424207] ? remove_wait_queue+0x150/0x150
[ 311.424212] ? kasan_unpoison_shadow+0x30/0x40
[ 311.424214] ? __init_waitqueue_head+0xa0/0xd0
[ 311.424218] ? task_non_contending.cold.55+0x18/0x18
[ 311.424221] ? irq_forced_thread_fn+0xa0/0xa0
[ 311.424226] ? irq_thread_check_affinity+0x170/0x170
[ 311.424230] ? kthread+0x19e/0x1c0
[ 311.424233] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 311.424237] ? ret_from_fork+0x32/0x40
[ 311.424244] Allocated by task 899:
[ 311.424249] kasan_kmalloc+0xbf/0xe0
[ 311.424252] __kmalloc_track_caller+0xd9/0x1f0
[ 311.424255] kmemdup+0x17/0x40
[ 311.424264] rmi_set_attn_data+0xa4/0x1b0 [rmi_core]
[ 311.424269] rmi_raw_event+0x10b/0x1f0 [hid_rmi]
[ 311.424278] hid_input_report+0x1a8/0x2c0 [hid]
[ 311.424283] i2c_hid_irq+0x146/0x1d0 [i2c_hid]
[ 311.424286] irq_thread_fn+0x3d/0x80
[ 311.424288] irq_thread+0x21d/0x290
[ 311.424291] kthread+0x19e/0x1c0
[ 311.424293] ret_from_fork+0x32/0x40
[ 311.424296] Freed by task 1162:
[ 311.424300] kasan_slab_free+0x71/0xc0
[ 311.424303] kfree+0x90/0x190
[ 311.424311] rmi_irq_fn+0x1b2/0x270 [rmi_core]
[ 311.424319] rmi_irq_fn+0x257/0x270 [rmi_core]
[ 311.424322] irq_thread_fn+0x3d/0x80
[ 311.424324] irq_thread+0x21d/0x290
[ 311.424327] kthread+0x19e/0x1c0
[ 311.424330] ret_from_fork+0x32/0x40
[ 311.424334] The buggy address belongs to the object at ffff88041fd610c0 which belongs to the cache kmalloc-64 of size 64
[ 311.424340] The buggy address is located 27 bytes inside of 64-byte region [ffff88041fd610c0, ffff88041fd61100)
[ 311.424344] The buggy address belongs to the page:
[ 311.424348] page:ffffea00107f5840 count:1 mapcount:0 mapping: (null) index:0x0
[ 311.424353] flags: 0x17ffffc0000100(slab)
[ 311.424358] raw: 0017ffffc0000100 0000000000000000 0000000000000000 00000001802a002a
[ 311.424363] raw: dead000000000100 dead000000000200 ffff8804228036c0 0000000000000000
[ 311.424366] page dumped because: kasan: bad access detected
[ 311.424369] Memory state around the buggy address:
[ 311.424373] ffff88041fd60f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 311.424377] ffff88041fd61000: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb
[ 311.424381] >ffff88041fd61080: fb fb fb fb fc fc fc fc fb fb fb fb fb fb fb fb
[ 311.424384] ^
[ 311.424387] ffff88041fd61100: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc
[ 311.424391] ffff88041fd61180: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb
Cc: stable@vger.kernel.org
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The fix for handling two-finger scroll (i4a646580f793 - "Input: ALPS -
fix two-finger scroll breakage in right side on ALPS touchpad")
introduced a minor "typo" that broke decoding of multi-touch events are
decoded on some ALPS touchpads. For example, tapping with three-fingers
can no longer be used to emulate middle-mouse-button (the kernel doesn't
recognize this as the proper event, and doesn't report it correctly to
userspace). This affects touchpads that use SS4 "plus" protocol
variant, like those found on Dell E7270 & E7470 laptops (tested on
E7270).
First, probably the code in alps_decode_ss4_v2() for case
SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see
0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part.
Second, in the previous patch, new macros were introduced to decode X
coordinates specific to the SS4 "plus" variant, but the macro to
define the maximum X value wasn't changed accordingly. The macros to
decode X values for "plus" variant are effectively shifted right by 1
bit, but the max wasn't shifted too. This causes the driver to
incorrectly handle "no data" cases, which also interfered with how
multi-touch was handled.
Fixes: 4a646580f793 ("Input: ALPS - fix two-finger scroll breakage...")
Signed-off-by: Nir Perry <nirperry@gmail.com>
Reviewed-by: Masaki Ota <masaki.ota@jp.alps.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The tpouchpad/trackpoint on Lenovo Thinkpad T460p work with smbus/RMI.
Signed-off-by: Zhenjie Wang <zhenjie.wang@sjtu.edu.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The lack of the MODULE_LICENSE tag can lead to a warning here:
WARNING: modpost: missing MODULE_LICENSE() in drivers/input/touchscreen/of_touchscreen.o
I'm adding a license and description tag, but no MODULE_AUTHOR()
as this file is a collection of standalone helper functions that
were all added by different developers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Fix child node-lookup during probe, which ended up searching the whole
device tree depth-first starting at parent rather than just matching on
its children.
To make things worse, the parent node was prematurely freed, while the
child node was leaked.
Fixes: 2e57d56747e6 ("mfd: 88pm860x: Device tree support")
Cc: stable <stable@vger.kernel.org> # 3.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at parent rather than just matching on
its children.
Later sanity checks on node properties (which would likely be missing)
should prevent this from causing much trouble however, especially as the
original premature free of the parent node has already been fixed
separately (but that "fix" was apparently never backported to stable).
Fixes: e7ec014a47e4 ("Input: twl6040-vibra - update for device tree support")
Fixes: c52c545ead97 ("Input: twl6040-vibra - fix DT node memory management")
Cc: stable <stable@vger.kernel.org> # 3.6
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com> (on Pyra OMAP5 hardware)
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
A helper purported to look up a child node based on its name was using
the wrong of-helper and ended up prematurely freeing the parent of-node
while searching the whole device tree depth-first starting at the parent
node.
Fixes: 64b9e4d803b1 ("input: twl4030-vibra: Support for DT booted kernel")
Fixes: e661d0a04462 ("Input: twl4030-vibra - fix ERROR: Bad of_node_put() warning")
Cc: stable <stable@vger.kernel.org> # 3.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Some user-space applications expect multi-touch pressure
on contact to be reported if it is advertised in device
properties. Otherwise, such applications may treat reports
not as actual touches, but hovering. Currently this is
only advertised, but not reported.
Fix this by not advertising that ABS_MT_PRESSURE is supported.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
Patchwork-Id: 10140017
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
gpiod_() API requires including "linux/gpio/consumer.h". Also, we are not
using the legacy API nor the static board files descriptions, so no need to
include gpio.h nor gpio/machine.h.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Anthony Kim <anthony.kim@hideep.com>
Patchwork-Id: 10094831
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This is similar to commit a4b0a58bb142 ("Input: elan_i2c - do not
clobber interrupt trigger on x86")
On x86 we historically used falling edge interrupts in the driver
because that's how first Chrome devices were configured. They also
did not use ACPI to enumerate I2C devices (because back then there
was no kernel support for that), so trigger was hard-coded in the
driver. However the controller behavior is much more reliable if
we use level triggers, and that is how we configured ARM devices,
and how want to configure newer x86 devices as well. All newer
x86 boxes have their I2C devices enumerated in ACPI.
Let's see if platform code (ACPI, DT) described interrupt and
specified particular trigger type, and if so, let's use it instead
of always clobbering trigger with IRQF_TRIGGER_FALLING. We will
still use this trigger type as a fallback if platform code left
interrupt trigger unconfigured.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Fixes:
drivers/input/joystick/analog.c:176:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp]
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The touchpad of Lenovo Thinkpad L480 reports it's version as 15.
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
1. change "to" to "too".
2. move ")" to the front of "\n", which discovered by Joe Perches.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Joe Perches <joe@perches.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Prepare input updates for 4.15 merge window.
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114761
Addresses-Coverity-ID: 114762
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114763
Addresses-Coverity-ID: 114764
Addresses-Coverity-ID: 114765
Addresses-Coverity-ID: 114766
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114767
Addresses-Coverity-ID: 114768
Addresses-Coverity-ID: 114769
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
We have to unlock before returning if input_allocate_device() fails.
Fixes: 04ce40a61a91 ("Input: uinput - remove uinput_allocate_device()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The S6SY761 touchscreen is a capicitive multi-touch controller
for mobile use. It's connected with i2c at the address 0x48.
This commit provides a basic version of the driver which can
handle only initialization, touch events and power states.
The controller is controlled by a firmware which, in the version
I currently have, doesn't provide all the possible
functionalities mentioned in the datasheet.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The HiDeep touchscreen device is a capacitive multi-touch controller
mainly for multi-touch supported devices use. It use I2C interface for
communication to IC and provide axis X, Y, Z locations for ten finger
touch through input event interface to userspace.
It support the Crimson and the Lime two type IC. They are different
the number of channel supported and FW size. But the working protocol
is same.
Signed-off-by: Anthony Kim <anthony.kim@hideep.com>
Acked-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Commit 1fa59bda21c7fa36 ("ARM: shmobile: Remove legacy board code for
Armadillo-800 EVA"), removed the last user of st1232_pdata and the
"st1232-ts" platform device. All remaining users use DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Merge with mainline to bring in SPDX markings to avoid annoying merge
problems when some header files get deleted.
|
|
Some Synaptics devices, such as LEN0073, use SMBUS version 3.
Signed-off-by: Yiannis Marangos <yiannis.marangos@gmail.com>
Acked-by: Benjamin Tissoires <benjamion.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
If INPUT_PROP_DIRECT is set, userspace doesn't have to fall back to old
ways of identifying touchscreen devices.
In order to identify a touchscreen device, Android for example, seems to
already depend on INPUT_PROP_DIRECT to be present in drivers. udev still
checks for either BTN_TOUCH or INPUT_PROP_DIRECT. Checking for BTN_TOUCH
however can quite easily lead to false positives; it's a code that not only
touchscreen device drivers use.
According to the documentation, touchscreen drivers should have this
property set and in order to make life easy for userspace, let's set it.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
ELAN060C touchpad uses elan_i2c as its driver. It can be
found on Lenovo ideapad 320-14AST.
BugLink: https://bugs.launchpad.net/bugs/1727544
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull input fixes from Dmitry Torokhov:
"Just a couple of fixups to the sparse-keymap module and the Microchip
AR1021 touchscreen driver"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: sparse-keymap - send sync event for KE_SW/KE_VSW
Input: ar1021_i2c - set INPUT_PROP_DIRECT
|
|
Sync events are sent by sparse_keymap_report_entry for normal KEY_*
events, and are generated by several drivers after generating
SW_* events, so sparse_keymap_report_entry should do the same.
Without the sync, events are accumulated in the kernel.
Currently, no driver uses sparse-keymap for SW_* events, but
it is required for the intel-vbtn platform driver to generate
SW_TABLET_MODE events.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
If INPUT_PROP_DIRECT is set, userspace doesn't have to fall back to old
ways of identifying touchscreen devices. Let's add it.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There are several places to perform subtraction to calculate buffer
size such as:
si->si_ofs.cydata_size = si->si_ofs.test_ofs - si->si_ofs.cydata_ofs;
...
p = krealloc(si->si_ptrs.cydata, si->si_ofs.cydata_size, GFP_KERNEL);
Actually, data types of above variables during subtraction are size_t, so
it is unsigned. That means if second operand(si->si_ofs.cydata_ofs) is
greater than the first operand(si->si_ofs.test_ofs), then resulting
si->si_ofs.cydata_size could result in an unsigned integer wrap which is
not desirable.
The proper way to correct this problem is to perform a test of both
operands to avoid having unsigned wrap.
Signed-off-by: Vince Kim <vince.k.kim@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull input fixes from Dmitry Torokhov:
- fix gtco tablet driver, tightening parsing of HID descriptors
- add ACPI ID added to Elan driver to be able to handle touchpads found
in Lenovo Ideapad 320/520
- fix the Symaptics RMI4 driver to adjust handling of buttons
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - limit the range of what GPIOs are buttons
Input: gtco - fix potential out-of-bound access
Input: elan_i2c - add ELAN0611 to the ACPI table
|
|
The pointer 'input' is being initialized with ts->ts_input and this
value is not being read as it is updated a few lines later with the
return value from the call to devm_input_allocate_device. Remove the
redundant initialization assignment. Cleans up clang warning:
drivers/input/touchscreen/mxs-lradc-ts.c:587:20: warning: Value Xi
stored to 'input' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
By convention the first 6 bits of F30 Ctrl 2 and 3 are used to signify
GPIOs which are connected to buttons. Additional GPIOs may be used as
input GPIOs to signal the touch controller of some event
(ie disable touchpad). These additional GPIOs may meet the criteria of
a button in rmi_f30_is_valid_button() but should not be considered
buttons. This patch limits the GPIOs which are mapped to buttons to just
the first 6.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reported-by: Daniel Martin <consume.noise@gmail.com>
Tested-by: Daniel Martin <consume.noise@gmail.com>
Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
parse_hid_report_descriptor() has a while (i < length) loop, which
only guarantees that there's at least 1 byte in the buffer, but the
loop body can read multiple bytes which causes out-of-bounds access.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The 3000 series have a new protocol which allows to report up to 5 points
in a single 66 byte frame. One must always read in 66 byte frames.
To support up to 10 points, two consecutive frames need to be read:
The first frame says how many points until sync.
The second frame must say zero points or both frames must be discarded.
To be able to work with the higher 400KHz I2C bus rate, one must
successfully send a special package prior _each_ read or the controller
will refuse to cooperate.
This is a minimal implementation based on egalax_i2c.c (which can be found
on the internet) and egalax_ts.c but without the vendor interface and no
power management support.
Signed-off-by: Ahmet Inan <inan@distec.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Support was added based on Goodix GitHub repo [1]. There are two major
differences between gt1151 and currently supported devices (gt9x):
* CONFIG_DATA register has 0x8050 address instead of 0x8047,
* config data checksum has 16-bit width instead of 8-bit.
Also update goodix_i2c_test() function, so it reads ID register (which
has the same address for all devices) instead of CONFIG_DATA (because
its address is known only after reading ID of the device).
[1] https://github.com/goodix/gt1x_driver_generic
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
ELAN0611 touchpad uses elan_i2c as its driver. It can be found
on Lenovo ideapad 320-15IKB.
So add it to ACPI table to enable the touchpad.
[Ido Adiv <idoad123@gmail.com> reports that the same ACPI ID is used for
Elan touchpad in ideapad 520].
BugLink: https://bugs.launchpad.net/bugs/1723736
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
We've been missing a goto to the unwind path...
Acked-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There is nothing in the uinput kernel header that is of use to anyone in
the kernel besides the uinput driver itself, so let's fold it into the
driver code (leaving uapi part intact).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
Nick Dyer
Dmitry Torokhov
Aaron Ma
Mark Furneaux
Andi Shyti
Nick Desaulniers
Nir Perry
王振杰
Arnd Bergmann
Johan Hovold
Oleksandr Andrushchenko
Anthony Kim
Olof Johansson
Zhen Lei
Gustavo A. R. Silva
Dan Carpenter
Geert Uytterhoeven
Yiannis Marangos
Martin Kepplinger
Kai-Heng Feng
Linus Torvalds
Stefan Brüns
Kees Cook
Vince Kim
Greg Kroah-Hartman
Colin Ian King
Andrew Duggan
Ahmet Inan
Marcin Niestroj