| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull chrome platform updates from Benson Leung:
- a series from Dmitry to remove platform data from chromeos_laptop.c,
which was the only user of platform data for the atmel_mxt_ts driver.
- a series to clean up sysfs and debugfs for cros_ec
- other misc cleanups
* tag 'chrome-platform-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: (22 commits)
platform/chrome: mfd/cros_ec_dev: Add sysfs entry to set keyboard wake lid angle
platform/chrome: cros_ec_debugfs: Add PD port info to debugfs
platform/chrome: cros_ec_debugfs: Use octal permissions '0444'
platform/chrome: cros_ec_sysfs: use permission-specific DEVICE_ATTR variants
platform/chrome: cros_ec_sysfs: introduce to_cros_ec_dev define.
platform/chrome: cros_ec_sysfs: Modify error handling
platform/chrome: cros_ec_lpc: Add support for Google devices using custom coreboot firmware
platform/chrome: cros_ec_lpc: wake up from s2idle on Chrome EC
Input: atmel_mxt_ts - remove platform data support
platform/chrome: chromeos_laptop - discard data for unneeded boards
platform/chrome: chromeos_laptop - use device properties for Pixel
platform/chrome: chromeos_laptop - rely on I2C to set up interrupt trigger
platform/chrome: chromeos_laptop - use I2C notifier to create devices
platform/chrome: chromeos_laptop - parse DMI IRQ data once
platform/chrome: chromeos_laptop - rework i2c peripherals initialization
platform/chrome: chromeos_laptop - factor out getting IRQ from DMI
platform/chrome: chromeos_laptop - introduce pr_fmt()
platform/chrome: chromeos_laptop - stop setting suspend mode for Atmel devices
platform/chrome: chromeos_laptop - add SPDX identifier
Input: atmel_mxt_ts - switch ChromeOS ACPI devices to generic props
...
|
|
Now that there are no users of custom Atmel platform data, and everyone
has switched to the generic device properties, we can remove support for
the platform data.
Acked-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
Move older ChromeOS devices describing Atmel controllers in ACPI, but not
providing enough details to configure the controllers properly, from
platform data over to generic device properties. This will allow us
remove support for platform data later on, leaving only generic device
properties in place.
Acked-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
Instead of using OF-specific APIs to fecth device properties, let's switch
to generic device properties API. This will allow us to use device
properties on legacy ChromeOS devices and get rid of platform data down
the road.
Acked-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
The way we are supposed to put controller to sleep and wake it up does not
depend on the platform, but rather on controller itself, so we want to get
rid of suspend mode in platform data (and eventually get rid of platform
data completely). Unfortunately some early chromebooks (the original Pixel,
Acer C720) were shipped with config that requires manually re-enabling
touch reporting in T9. We will sort it out, but in the meantime let's
switch to a simple DMI quirk.
We'll keep pdata->suspend_mode for now and remove it when we rework
chromeos-laptop driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
Pull input updates from Dmitry Torokhov:
- new driver for PhoenixRC Flight Controller Adapter
- new driver for RAVE SP Power button
- fixes for autosuspend-related deadlocks in a few unput USB dirvers
- support for 2nd wheel in ATech PS/2 mouse
- fix for ALPS trackpoint detection on Thinkpad L570 and Latitude 7370
- bunch of cleanups in various in PS/2 protocols
- other assorted changes and fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits)
Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad
Input: stmfts, s6sy761 - update my e-mail
Input: stmfts - use async probe & suspend/resume to avoid 2s delay
Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370
Input: xpad - add PDP device id 0x02a4
Input: alps - report pressure of v3 and v7 trackstick
Input: pxrc - new driver for PhoenixRC Flight Controller Adapter
Input: usbtouchscreen - do not rely on input_dev->users
Input: usbtouchscreen - fix deadlock in autosuspend
Input: pegasus_notetaker - do not rely on input_dev->users
Input: pagasus_notetaker - fix deadlock in autosuspend
Input: synaptics_usb - do not rely on input_dev->users
Input: synaptics_usb - fix deadlock in autosuspend
Input: gpio-keys - add support for wakeup event action
Input: appletouch - use true and false for boolean values
Input: silead - add Chuwi Hi8 support
Input: analog - use get_cycles() on PPC
Input: stmpe-keypad - remove VLA usage
Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list
Input: add RAVE SP Powerbutton driver
...
|
|
Prepare input updates for 4.17 merge window.
|
|
The touch sensor buttons on Sony VAIO VGN-CS series laptops (e.g.
VGN-CS31S) are a separate PS/2 device. As the MUX is disabled for all
VAIO machines by the nomux blacklist, the data from touch sensor
buttons and touchpad are combined. The protocol used by the buttons is
probably similar to the touchpad protocol (both are Synaptics) so both
devices get enabled. The controller combines the data, creating a mess
which results in random button clicks, touchpad stopping working and
lost sync error messages:
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request
Add a new i8042_dmi_forcemux_table whitelist with VGN-CS.
With MUX enabled, touch sensor buttons are detected as separate device
(and left disabled as there's currently no driver), fixing all touchpad
problems.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Pull time(r) updates from Thomas Gleixner:
"A small set of updates for timers and timekeeping:
- The most interesting change is the consolidation of clock MONOTONIC
and clock BOOTTIME.
Clock MONOTONIC behaves now exactly like clock BOOTTIME and does
not longer ignore the time spent in suspend. A new clock
MONOTONIC_ACTIVE is provived which behaves like clock MONOTONIC in
kernels before this change. This allows applications to
programmatically check for the clock MONOTONIC behaviour.
As discussed in the review thread, this has the potential of
breaking user space and we might have to revert this. Knock on wood
that we can avoid that exercise.
- Updates to the NTP mechanism to improve accuracy
- A new kernel internal data structure to aid the ongoing Y2038 work.
- Cleanups and simplifications of the clocksource code.
- Make the alarmtimer code play nicely with debugobjects"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Init nanosleep alarm timer on stack
y2038: Introduce struct __kernel_old_timeval
tracing: Unify the "boot" and "mono" tracing clocks
hrtimer: Unify MONOTONIC and BOOTTIME clock behavior
posix-timers: Unify MONOTONIC and BOOTTIME clock behavior
timekeeping: Remove boot time specific code
Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior
timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock
timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock
timekeeping/ntp: Determine the multiplier directly from NTP tick length
timekeeping/ntp: Don't align NTP frequency adjustments to ticks
clocksource: Use ATTRIBUTE_GROUPS
clocksource: Use DEVICE_ATTR_RW/RO/WO to define device attributes
clocksource: Don't walk the clocksource list for empty override
|
|
Pull media updates from Mauro Carvalho Chehab:
- new CEC pin injection code for testing purposes
- DVB frontend cxd2099 promoted from staging
- new platform driver for Sony cxd2880 DVB devices
- new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x,
tw9910.c
- removal of unused cx18 and ivtv alsa mixers
- the reneseas-ceu driver doesn't depend on soc_camera anymore and
moved from staging
- removed the mantis_vp3028 driver, unused since 2009
- s5p-mfc: add support for version 10 of the MSP
- added a decoder for imon protocol
- atomisp: lots of cleanups
- imx074 and mt9t031: don't depend on soc_camera anymore, being
promoted from staging
- added helper functions to better support DVB I2C binding
- lots of driver improvements and cleanups
* tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits)
media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd)
media: fimc-capture: get rid of two warnings
media: dvb-usb-v2: fix a missing dependency of I2C_MUX
media: uvc: to the right check at uvc_ioctl_enum_framesizes()
media: cec-core: fix a bug at cec_error_inj_write()
media: tda9840: cleanup a warning
media: tm6000: avoid casting just to print pointer address
media: em28xx-input: improve error handling code
media: zr364xx: avoid casting just to print pointer address
media: vivid-radio-rx: add a cast to avoid a warning
media: saa7134-alsa: don't use casts to print a buffer address
media: solo6x10: get rid of an address space warning
media: zoran: don't cast pointers to print them
media: ir-kbd-i2c: change the if logic to avoid a warning
media: ir-kbd-i2c: improve error handling code
media: saa7134-input: improve error handling
media: s2255drv: fix a casting warning
media: ivtvfb: Cleanup some warnings
media: videobuf-dma-sg: Fix a weird cast
soc_camera: fix a weird cast on printk
...
|
|
Pull parisc updates from Helge Deller:
"Lots of small enhancements and fixes in this patchset:
- improved the x86-64 compatibility for PCI cards by returning -1UL
for timed out MMIO transactions (instead of crashing)
- fixed HPMC handler for PAT machines: size needs to be multiple of 16
- prepare machine_power_off() to be able to turn rp3410 and c8000
machines off via IMPI
- added code to extract machine info for usage with qemu
- some init sections fixes
- lots of fixes for sparse-, ubsan- and uninitalized variables
warnings"
* 'parisc-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix out of array access in match_pci_device()
parisc: Add code generator for Qemu/SeaBIOS machine info
parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode
parisc: Fix HPMC handler by increasing size to multiple of 16 bytes
parisc: Directly call machine_power_off() in power button driver
parisc: machine_power_off() should call pm_power_off()
parisc/Kconfig: SMP kernels boot on all machines
parisc: Silence uninitialized variable warning in dbl_to_sgl_fcnvff()
parisc: Move various functions and strings to init section
parisc: Convert MAP_TYPE to cover 4 bits on parisc
parisc: Force to various endian types for sparse
parisc/gscps2: Fix sparse warnings
parisc/led: Fix sparse warnings
parisc/parport_gsc: Use NULL to avoid sparse warning
parisc/stifb: Use fb_memset() to avoid sparse warning
|
|
Pul removal of obsolete architecture ports from Arnd Bergmann:
"This removes the entire architecture code for blackfin, cris, frv,
m32r, metag, mn10300, score, and tile, including the associated device
drivers.
I have been working with the (former) maintainers for each one to
ensure that my interpretation was right and the code is definitely
unused in mainline kernels. Many had fond memories of working on the
respective ports to start with and getting them included in upstream,
but also saw no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company in
charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
seems that all the SoC product lines are still around, but have not
used the custom CPU architectures for several years at this point. In
contrast, CPU instruction sets that remain popular and have actively
maintained kernel ports tend to all be used across multiple licensees.
[ See the new nds32 port merged in the previous commit for the next
generation of "one company in charge of an SoC line, a CPU
microarchitecture and a software ecosystem" - Linus ]
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I
made sure that they are all unused. Some architectures (notably tile,
mn10300, and blackfin) are still being shipped in products with old
kernels, but those products will never be updated to newer kernel
releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing
their support or getting it added to mainline gcc in the first
place. They all have patched gcc-7.3 ports that work to some
degree, but complete upstream support won't happen before gcc-8.1.
Csky posted their first kernel patch set last week, their situation
will be similar
[ Palmer Dabbelt points out that RISC-V support is in mainline gcc
since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]"
This really says it all:
2498 files changed, 95 insertions(+), 467668 deletions(-)
* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
MAINTAINERS: UNICORE32: Change email account
staging: iio: remove iio-trig-bfin-timer driver
tty: hvc: remove tile driver
tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
serial: remove tile uart driver
serial: remove m32r_sio driver
serial: remove blackfin drivers
serial: remove cris/etrax uart drivers
usb: Remove Blackfin references in USB support
usb: isp1362: remove blackfin arch glue
usb: musb: remove blackfin port
usb: host: remove tilegx platform glue
pwm: remove pwm-bfin driver
i2c: remove bfin-twi driver
spi: remove blackfin related host drivers
watchdog: remove bfin_wdt driver
can: remove bfin_can driver
mmc: remove bfin_sdh driver
input: misc: remove blackfin rotary driver
input: keyboard: remove bf54x driver
...
|
|
Because I will be leaving Samsung soon, for reachability update
my reference e-mail to etezian.org.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Executing stmfts_power_on() function lasts over 2 seconds, what
significantly slows down the boot and resume processes if driver is
compiled in. Avoid this delay by forcing this driver to be probed
and suspended/resumed asynchronously.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The primary interface for the touchpad device in Thinkpad L570 is SMBus,
so ALPS overlooked PS2 interface Firmware setting of TrackStick, and
shipped with TrackStick otp bit is disabled.
The address 0xD7 contains device number information, so we can identify
the device by checking this value, but to access it we need to enable
Command mode, and then re-enable the device. Devices shipped in Thinkpad
L570 report either 0x0C or 0x1D as device numbers, if we see them we assume
that the devices are DualPoints.
The same issue exists on Dell Latitude 7370.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196929
Fixes: 646580f793 ("Input: ALPS - fix multi-touch decoding on SS4 plus touchpads")
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Tested-by: Jaak Ristioja <jaak@ristioja.ee>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Adds support for a PDP Xbox One controller with device ID
(0x06ef:0x02a4). The Product string for this device is "PDP Wired
Controller for Xbox One - Stealth Series | Phantom Black".
Signed-off-by: Francis Therien <frtherien@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
ALPS v3 and v7 packet formats reports trackstick pressure. This information
is already parsed in unused "z" variable.
ALPS SS4 S2 devices already reports trackstick pressure as ABS_PRESSURE
attribute, therefore reports pressure in the same way also for v3 and v7.
This patch also updates parsing v3 pressure information, it is also stored
in 7 bits.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This driver let you plug in your RC controller to the adapter and
use it as input device in various RC simulators.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
If the device is unused and suspended, a call to open will cause the
device to autoresume through the call to usb_autopm_get_interface().
input_dev->users is already incremented by the input subsystem,
therefore this expression will always be evaluated to true:
if (input->users || usbtouch->type->irq_always)
result = usb_submit_urb(usbtouch->irq, GFP_NOIO);
The same URB will then be fail when resubmitted in usbtouch_open().
Introduce usbtouch->is_open to keep track of the state instead.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
usb_autopm_get_interface() that is called in usbtouch_open() does an
autoresume if the device is suspended.
input_dev->mutex used in usbtouch_resume() is in this case already
taken by the input subsystem and will cause a deadlock.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The blackfin architecture is getting removed, so this
one is obsolete as well.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The blackfin architecture is getting removed, so this
driver is now obsolete.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A lot of Kconfig symbols have architecture specific dependencies.
In those cases that depend on architectures we have already removed,
they can be omitted.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If the device is unused and suspended, a call to open will cause the
device to autoresume through the call to usb_autopm_get_interface().
input_dev->users is already incremented by the input subsystem,
therefore this expression will always be evaluated to true:
if (pegasus->dev->users && usb_submit_urb(pegasus->irq, GFP_NOIO) < 0)
retval = -EIO;
The same URB will then be fail when resubmitted in pegasus_open().
Introduce pegasus->is_open to keep track of the state instead.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
usb_autopm_get_interface() that is called in pegasus_open() does an
autoresume if the device is suspended.
input_dev->mutex used in pegasus_resume() is in this case already
taken by the input subsystem and will cause a deadlock.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
If the device is unused and suspended, a call to open will cause the
device to autoresume through the call to usb_autopm_get_interface().
input_dev->users is already incremented by the input subsystem,
therefore this expression will always be evaluated to true:
if ((input_dev->users || (synusb->flags & SYNUSB_IO_ALWAYS)) &&
usb_submit_urb(synusb->urb, GFP_NOIO) < 0) {
retval = -EIO;
}
The same URB will then be fail when resubmitted in synusb_open().
Introduce synusb->is_open to keep track of the state instead.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
usb_autopm_get_interface() that is called in synusb_open() does an
autoresume if the device is suspended.
input_dev->mutex used in synusb_resume() is in this case already
taken by the input subsystem and will cause a deadlock.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Merge various PS/2 handling improvements.
|
|
Add support for specifying event actions to trigger wakeup when using
the gpio-keys input device as a wakeup source.
This would allow the device to configure when to wakeup the system. For
example a gpio-keys input device for pen insert, may only want to wakeup
the system when ejecting the pen.
Suggested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This commit add ACPI support for Chuwi Hi8 tablet. On the ACPI table of
the tablet, GSL1680 is registered as MSSL0001, so the driver does not
recognize the device. This commit resolve it.
Signed-off-by: Shohei Maruyama <cheat.sc.linux@outlook.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The analog joystick driver spits a warning at us:
drivers/input/joystick/analog.c:176:2: warning: #warning Precise timer
not defined for this architecture.
PPC has get_cycles() so use that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Now that the MONOTONIC and BOOTTIME clocks are indentical, remove all the
special casing.
The user space visible interfaces still support both clocks, but their behavior
is identical.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-input@vger.kernel.org
Link: http://lkml.kernel.org/r/20180301165150.155899327@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In preparation to enabling -Wvla, remove VLA and replace it with a
fixed-length array instead.
Fixed as part of the directive to remove all VLAs from the kernel:
https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Remove the MN10300 arch as the hardware is defunct.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Masahiro Yamada <yamada.masahiro@socionext.com>
cc: linux-am33-list@redhat.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Reset i8042 before probing because of insufficient BIOS initialisation of
the i8042 serial controller. This makes Synaptics touchpad detection
possible. Without resetting the Synaptics touchpad is not detected because
there are always NACK messages from AUX port.
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add driver that properly handles input event emitted by RAVE SP
devices.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Sync up with mainline to bring in RAVE MFD device core.
|
|
Pull input fixes from Dmitry Torokhov:
- we are reverting patch that was switched touchpad on Lenovo T460P
over to native RMI because on these boxes BIOS messes up with SMBus
controller state. We might re-enable it later once SMBus issue is
resolved
- disabling interrupts in matrix_keypad driver was racy
- mms114 now has SPDX header and matching MODULE_LICENSE
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI"
Input: matrix_keypad - fix race when disabling interrupts
Input: mms114 - add SPDX identifier
Input: mms114 - fix license module information
|
|
This reverts commit 48282969826b3d3c76e908182f69724d86d995fe which
caused the following issues:
1. On T460p with BIOS version 2.22 touchpad and trackpoint stop working
after suspend-resume cycle. Due to strange state of the device another
suspend is impossible.
The following dmesg errors can be observed:
thinkpad_acpi: EC reports that Thermal Table has changed
rmi4_smbus 7-002c: failed to get SMBus version number!
rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask.
rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -16.
rmi4_f01 rmi4-00.fn01: Resume failed with code -16.
rmi4_physical rmi4-00: Failed to suspend functions: -16
rmi4_smbus 7-002c: Failed to resume device: -16
PM: resume devices took 0.640 seconds
rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-16).
rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts!
rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts!
psmouse: probe of serio3 failed with error -1
2. On another T460p with BIOS version 2.15 two finger scrolling gesture
on the touchpad stops working after suspend-resume cycle (about 75%
reproducibility, when it still works, the scrolling gesture becomes
laggy). Nothing suspicious appears in the dmesg.
Analysis form Richard Schütz:
"RMI is unreliable on the ThinkPad T460p because the device is affected
by the firmware behavior addressed in a7ae81952cda ("i2c: i801: Allow
ACPI SystemIO OpRegion to conflict with PCI BAR")."
The affected devices often show:
i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers
i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited
Reported-by: Richard Schütz <rschuetz@uni-koblenz.de>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Tested-by: Martin Peres <martin.peres@linux.intel.com>
Tested-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This patch registers four standard control handlers using the corresponding
V4L2 framework.
Signed-off-by: Florian Echtler <floe@butterbrot.org>
[hans.verkuil@cisco.com: lower-cased 0x0F and 0xF0]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
These functions provide write access to the internal LCD panel registers
which also control the sensor. They can be used to disable the
preprocessor, set the illumination brightness, and adjust gain/contrast
(which are stored together in one register internally called "vsvideo").
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This patch adds parameter definitions and module parameters for the four
userspace controls that the SUR40 can currently provide.
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The SUR40 can recognize specific printed patterns directly in hardware;
this information (i.e. the pattern id) is present but currently unused
in the blob structure.
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If matrix_keypad_stop() is executing and the keypad interrupt is triggered,
disable_row_irqs() may be called by both matrix_keypad_interrupt() and
matrix_keypad_stop() at the same time, causing interrupts to be disabled
twice and the keypad being "stuck" after resuming.
Take lock when setting keypad->stopped to ensure that ISR will not race
with matrix_keypad_stop() disabling interrupts.
Signed-off-by: Zhang Bo <zbsdta@126.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
input_mt_init_slots() may fail, we need to handle this condition.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Instead of manipulating capability bits directly, use
input_set_capability().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
We do not need to call ps2_command() several times in a row, transmitting
every byte as it were a command byte, we can often pack it all in a single
command.
Also, now that ps2_command() handles retransmission, we do not need to do
it ourselves in trackpoint_power_on_reset().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
Linus Torvalds
Dmitry Torokhov
Ondrej Zary
Andi Shyti
Marek Szyprowski
Masaki Ota
Helge Deller
Francis Therien
Pali Rohár
Marcus Folkesson
Arnd Bergmann
Jeffy Chen
Gustavo A. R. Silva
Maruyama Shohei
Michael Ellerman
Thomas Gleixner
David Howells
Dennis Wassenberg
Andrey Smirnov
Arkadiusz Hiler
Florian Echtler
Zhang Bo