aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-05-18Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds12-169/+139
Pull input updates from Dmitry Torokhov: "First round of updates for the input subsystem. No new drivers here, just some driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: rotary-encoder - fix bare use of 'unsigned' Input: cm109 - spin_lock in complete() cleanup Input: cm109 - fix handling of volume and mute buttons Input: byd - don't wipe dynamically allocated memory twice Input: twl4030 - fix unsafe macro definition Input: twl6040-vibra - remove mutex Input: bcm_iproc_tsc - DT spelling s/clock-name/clock-names/ Input: bcm_iproc_tsc - use syscon to access shared registers Input: ti_am335x_tsc - use SIMPLE_DEV_PM_OPS Input: omap-keypad - remove set_col_gpio_val() and get_row_gpio_val() Input: omap-keypad - drop empty PM stubs Input: omap-keypad - remove adjusting of scan delay Input: gpio-keys - clean up device tree binding example Input: kbtab - stop saving struct usb_device Input: gtco - stop saving struct usb_device Input: aiptek - stop saving struct usb_device Input: acecad - stop saving struct usb_device
2016-05-17Merge tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds3-16/+16
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel cycle v4.7: Core infrastructural changes: - Support for natively single-ended GPIO driver stages. This means that if the hardware has registers to configure open drain or open source configuration, we use that rather than (as we did before) try to emulate it by switching the line to an input to get high impedance. This is also documented throughly in Documentation/gpio/driver.txt for those of you who did not understand one word of what I just wrote. - Start to do away with the unnecessarily complex and unitelligible ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from the time when the GPIO subsystem was unmaintained. Archs can now just select GPIOLIB and be done with it, cleanups to arches will trickle in for the next kernel. Some minor archs ACKed the changes immediately so these are included in this pull request. - Advancing the use of the data pointer inside the GPIO device for storing driver data by switching the PowerPC, Super-H Unicore and a few other subarches or subsystem drivers in ALSA SoC, Input, serial, SSB, staging etc to use it. - The initialization now reads the input/output state of the GPIO lines, so that each GPIO descriptor knows - if this callback is implemented - whether the line is input or output. This also reflects nicely in userspace "lsgpio". - It is now possible to name GPIO producer names, line names, from the device tree. (Platform data has been supported for a while). I bet we will get a similar mechanism for ACPI one of those days. This makes is possible to get sensible producer names for e.g. GPIO rails in "lsgpio" in userspace. New drivers: - New driver for the Loongson1. - The XLP driver now supports Broadcom Vulcan ARM64. - The IT87 driver now supports IT8620 and IT8628. - The PCA953X driver now supports Galileo Gen2. Driver improvements: - MCP23S08 was switched to use the gpiolib irqchip helpers and now also suppors level-triggered interrupts. - 74x164 and RCAR now supports the .set_multiple() callback - AMDPT was converted to use generic GPIO. - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994 support the new single ended callback for open drain and in some cases open source. - Implement the .get_direction() callback for a few more drivers like PL061, Xgene. Cleanups: - Paul Gortmaker combed through the drivers and de-modularized those who are not really modules. - Move the GPIO poweroff DT bindings to the power subdir where they belong. - Rename gpio-generic.c to gpio-mmio.c, which is much more to the point. That's what it is handling, nothing more, nothing less" * tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits) MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB gpio: zevio: make it explicitly non-modular gpio: timberdale: make it explicitly non-modular gpio: stmpe: make it explicitly non-modular gpio: sodaville: make it explicitly non-modular pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms gpio: dt-bindings: add wd,mbl-gpio bindings gpio: of: make it possible to name GPIO lines gpio: make gpiod_to_irq() return negative for NO_IRQ gpio: xgene: implement .get_direction() gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver gpio: tegra: Implement gpio_get_direction callback gpio: set up initial state from .get_direction() gpio: rename gpio-generic.c into gpio-mmio.c gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case gpio: dwapb: add gpio-signaled acpi event support gpio: dwapb: convert device node to fwnode gpio: dwapb: remove name from dwapb_port_property gpio/qoriq: select IRQ_DOMAIN ...
2016-05-17Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-1/+1
Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (21 commits) gitignore: fix wording mfd: ab8500-debugfs: fix "between" in printk memstick: trivial fix of spelling mistake on management cpupowerutils: bench: fix "average" treewide: Fix typos in printk IB/mlx4: printk fix pinctrl: sirf/atlas7: fix printk spelling serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/ w1: comment spelling s/minmum/minimum/ Blackfin: comment spelling s/divsor/divisor/ metag: Fix misspellings in comments. ia64: Fix misspellings in comments. hexagon: Fix misspellings in comments. tools/perf: Fix misspellings in comments. cris: Fix misspellings in comments. c6x: Fix misspellings in comments. blackfin: Fix misspelling of 'register' in comment. avr32: Fix misspelling of 'definitions' in comment. treewide: Fix typos in printk Doc: treewide : Fix typos in DocBook/filesystem.xml ...
2016-05-16Merge branch 'next' into for-linusDmitry Torokhov12-169/+139
Prepare first round of input updates for 4.7 merge window.
2016-05-16Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-3/+3
Pull x86 asm updates from Ingo Molnar: "The main changes in this cycle were: - MSR access API fixes and enhancements (Andy Lutomirski) - early exception handling improvements (Andy Lutomirski) - user-space FS/GS prctl usage fixes and improvements (Andy Lutomirski) - Remove the cpu_has_*() APIs and replace them with equivalents (Borislav Petkov) - task switch micro-optimization (Brian Gerst) - 32-bit entry code simplification (Denys Vlasenko) - enhance PAT handling in enumated CPUs (Toshi Kani) ... and lots of other cleanups/fixlets" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) x86/arch_prctl/64: Restore accidentally removed put_cpu() in ARCH_SET_GS x86/entry/32: Remove asmlinkage_protect() x86/entry/32: Remove GET_THREAD_INFO() from entry code x86/entry, sched/x86: Don't save/restore EFLAGS on task switch x86/asm/entry/32: Simplify pushes of zeroed pt_regs->REGs selftests/x86/ldt_gdt: Test set_thread_area() deletion of an active segment x86/tls: Synchronize segment registers in set_thread_area() x86/asm/64: Rename thread_struct's fs and gs to fsbase and gsbase x86/arch_prctl/64: Remove FSBASE/GSBASE < 4G optimization x86/segments/64: When load_gs_index fails, clear the base x86/segments/64: When loadsegment(fs, ...) fails, clear the base x86/asm: Make asm/alternative.h safe from assembly x86/asm: Stop depending on ptrace.h in alternative.h x86/entry: Rename is_{ia32,x32}_task() to in_{ia32,x32}_syscall() x86/asm: Make sure verify_cpu() has a good stack x86/extable: Add a comment about early exception handlers x86/msr: Set the return value to zero when native_rdmsr_safe() fails x86/paravirt: Make "unsafe" MSR accesses unsafe even if PARAVIRT=y x86/paravirt: Add paravirt_{read,write}_msr() x86/msr: Carry on after a non-"safe" MSR access fails ...
2016-05-12Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds3-2/+9
Pull input subsystem fixes from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: twl6040-vibra - fix DT node memory management Input: max8997-haptic - fix NULL pointer dereference Input: byd - update copyright header
2016-05-09Input: twl6040-vibra - fix DT node memory managementH. Nikolaus Schaller1-0/+1
commit e7ec014a47e4 ("Input: twl6040-vibra - update for device tree support") made the separate vibra DT node to a subnode of the twl6040. It now calls of_find_node_by_name() to locate the "vibra" subnode. This function has a side effect to call of_node_put on() for the twl6040 parent node passed in as a parameter. This causes trouble later on. Solution: we must call of_node_get() before of_find_node_by_name() Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-09Input: rotary-encoder - fix bare use of 'unsigned'Clifton Barnes1-4/+4
fix checkpatch.pl warning about 'Prefer 'unsigned int' to bare use of 'unsigned'' Signed-off-by: Clifton Barnes <clifton.a.barnes@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-09Input: max8997-haptic - fix NULL pointer dereferenceMarek Szyprowski1-2/+4
NULL pointer derefence happens when booting with DTB because the platform data for haptic device is not set in supplied data from parent MFD device. The MFD device creates only platform data (from Device Tree) for itself, not for haptic child. Unable to handle kernel NULL pointer dereference at virtual address 0000009c pgd = c0004000 [0000009c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM (max8997_haptic_probe) from [<c03f9cec>] (platform_drv_probe+0x4c/0xb0) (platform_drv_probe) from [<c03f8440>] (driver_probe_device+0x214/0x2c0) (driver_probe_device) from [<c03f8598>] (__driver_attach+0xac/0xb0) (__driver_attach) from [<c03f67ac>] (bus_for_each_dev+0x68/0x9c) (bus_for_each_dev) from [<c03f7a38>] (bus_add_driver+0x1a0/0x218) (bus_add_driver) from [<c03f8db0>] (driver_register+0x78/0xf8) (driver_register) from [<c0101774>] (do_one_initcall+0x90/0x1d8) (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc) (kernel_init_freeable) from [<c06bb5b4>] (kernel_init+0x8/0x114) (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c) Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: <stable@vger.kernel.org> Fixes: 104594b01ce7 ("Input: add driver support for MAX8997-haptic") [k.kozlowski: Write commit message, add CC-stable] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-09Input: byd - update copyright headerChris Diamand1-0/+4
As pointed out by Richard, the changes to the comment got missed off the absolute mode patch somehow. Signed-off-by: Chris Diamand <chris@diamand.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-05Merge tag 'v4.6-rc6' into x86/asm, to refresh the treeIngo Molnar6-13/+16
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-04Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds3-24/+24
Pull input fixes from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atmel_mxt_ts - use mxt_acquire_irq in mxt_soft_reset Input: zforce_ts - fix dual touch recognition Input: twl6040-vibra - fix atomic schedule panic
2016-05-04Input: cm109 - spin_lock in complete() cleanupMing Lei1-4/+6
Complete() will be run with interrupt enabled, so change to spin_lock_irqsave(). Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-04Input: cm109 - fix handling of volume and mute buttonsFlorian Euchner1-7/+30
The CM109 driver reported key press events of volume up / down and record / playback mute buttons, but no release events. Report those events properly by handling volume and mute keys seperately. For the record and playback mute buttons, only presses are registered by the CM109, therefore simulate press-n-release. This fixes the volume control buttons of various USB headsets. Signed-off-by: Florian Euchner <florian.euchner@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-29Input: byd - don't wipe dynamically allocated memory twiceVladimir Zapolskiy1-1/+0
Since memory for a private data is allocated by kzalloc() there is no need to fill it with zeroes immediately after the allocation. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-29Input: twl4030 - fix unsafe macro definitionRui Teng1-12/+16
The bitwise shift operator has lower priority than plus operator. So the values on macros should be enclosed in parentheses. For example, "(1 << 4 + 1)" means "(1 << (4 + 1))", but it is not expected by the macros. And also fix other two coding style problems reported by scripts/checkpatch.pl. Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-28treewide: Fix typos in printkMasanari Iida1-1/+1
This patch fix spelling typos in printk from various part of the codes. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-26input: adp5588-keys: use gpiochip data pointerLinus Walleij1-5/+5
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-25Input: atmel_mxt_ts - use mxt_acquire_irq in mxt_soft_resetNick Dyer1-14/+14
If using IRQF_TRIGGER_FALLING, then there is a race here: if the reset completes before we enable the IRQ, then CHG is already low and touch will be broken. This has been seen on Chromebook Pixel 2. A workaround is to reconfig T18 COMMSCONFIG to enable the RETRIGEN bit using mxt-app: mxt-app -W -T18 44 mxt-app --backup Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-25Input: zforce_ts - fix dual touch recognitionKnut Wohlrab1-2/+2
A wrong decoding of the touch coordinate message causes a wrong touch ID. Touch ID for dual touch must be 0 or 1. According to the actual Neonode nine byte touch coordinate coding, the state is transported in the lower nibble and the touch ID in the higher nibble of payload byte five. Signed-off-by: Knut Wohlrab <Knut.Wohlrab@de.bosch.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-25Input: twl6040-vibra - remove mutexH. Nikolaus Schaller1-13/+2
The mutex does not seem to be needed. twl4030-vibra doesn't use one either. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-25Input: twl6040-vibra - fix atomic schedule panicH. Nikolaus Schaller1-8/+8
commit c6f39257c952 ("mfd: twl6040: Use regmap for register cache") did remove the private cache for the vibra control registers and replaced access within twl6040_get_vibralr_status() by calls to regmap. This is OK, as long as twl6040_get_vibralr_status() uses already cached values or is not called from interrupt context. But we call this in vibra_play() for checking that the vibrator is not configured for audio mode. The result is a "BUG: scheduling while atomic" if the first use of the twl6040 is a vibra effect, because the first fetch is by reading the twl6040 registers through (blocking) i2c and not from the cache. As soon as the regmap has cached the status, further calls are fine. The solution is to move the condition to the work() function which runs in context that can block. The original code returns -EBUSY, but the return value of ->play() functions is ignored anyways. Hence, we do not loose functionality by not returning an error but just reporting the issue to INFO loglevel. Tested-on: Pyra (omap5) prototype Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-23Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds6-13/+16
Pull input subsystem fixes from Dmitry Torokhov: "Just minor driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: twl4030-vibra - do not reparent to grandparent Input: twl6040-vibra - do not reparent to grandparent Input: twl6040-vibra - ignore return value of schedule_work Input: twl6040-vibra - fix NULL pointer dereference by removing workqueue Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay Input: arizona-haptic - don't assign input_dev parent Input: clarify we want BTN_TOOL_<name> on proximity Input: xpad - add Mad Catz FightStick TE 2 VID/PID Input: gtco - fix crash on detecting device without endpoints
2016-04-20Input: twl4030-vibra - do not reparent to grandparentDmitry Torokhov1-1/+0
For devm-managed input devices we should not modify input device's parent, otherwise automatic release of resources will not work properly. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-20Input: twl6040-vibra - do not reparent to grandparentDmitry Torokhov1-1/+0
For devm-managed input devices we should not modify input device's parent, otherwise automatic release of resources will not work properly. Tested-by: "H. Nikolaus Schaller" <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-19Input: twl6040-vibra - ignore return value of schedule_workH. Nikolaus Schaller1-5/+1
Returning ret is wrong. And checking for an error as well. User space may call multiple times until the work is really scheduled. twl4030-vibra.c also ignores the return value. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-19Input: twl6040-vibra - fix NULL pointer dereference by removing workqueueH. Nikolaus Schaller1-2/+1
commit 21fb9f0d5e91 ("Input: twl6040-vibra - use system workqueue") says that it switches to use the system workqueue but it did neither - remove the workqueue struct variable - replace code to really use the system workqueue Instead it calls queue_work() on uninitialized info->workqueue. The result is a NULL pointer dereference in vibra_play(). Solution: use schedule_work Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-17Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delayStephen Boyd1-3/+4
The trigger delay algorithm that converts from microseconds to the register value looks incorrect. According to most of the PMIC documentation, the equation is delay (Seconds) = (1 / 1024) * 2 ^ (x + 4) except for one case where the documentation looks to have a formatting issue and the equation looks like delay (Seconds) = (1 / 1024) * 2 x + 4 Most likely this driver was written with the improper documentation to begin with. According to the downstream sources the valid delays are from 2 seconds to 1/64 second, and the latter equation just doesn't make sense for that. Let's fix the algorithm and the range check to match the documentation and the downstream sources. Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: 92d57a73e410 ("input: Add support for Qualcomm PMIC8XXX power key") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: John Stultz <john.stultz@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-17Input: arizona-haptic - don't assign input_dev parentCharles Keepax1-1/+0
We shouldn't assign the parent device of the input_dev to be the parent MFD device, because this will be used for devres which causes input_unregister_device to run after the haptics device has been removed, since it is itself a child of the MFD device. The default of using the haptics device itself as the parent is correct. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-13x86/cpufeature: Replace cpu_has_tsc with boot_cpu_has() usageBorislav Petkov1-3/+3
Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Sailer <t.sailer@alumni.ethz.ch> Link: http://lkml.kernel.org/r/1459801503-15600-7-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-06Input: bcm_iproc_tsc - use syscon to access shared registersRaveendra Padasalagi1-34/+43
In Cygnus SOC touch screen controller registers are shared with ADC and flex timer. Using readl/writel could lead to race condition. So touch screen driver is enhanced to support register access using syscon framework API's to take care of mutually exclusive access. Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-05Input: ti_am335x_tsc - use SIMPLE_DEV_PM_OPSDmitry Torokhov1-12/+4
Instead of doing the dance with macro that either resolves to a pointer or NULL, let's switch to using SIMPLE_DEV_PM_OPS(). Also let's mark suspend and resume methods as __maybe_unused instead of guarding them with an #ifdef and rely on linker to drop unused code. Doing so should allow better compile coverage. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-05Input: omap-keypad - remove set_col_gpio_val() and get_row_gpio_val()Dmitry Torokhov1-25/+0
Commit f799a3d8fe170159257b75c1baf48a7c1f625d1d ("Input: omap-keypad: Remove dependencies to mach includes") removed users of the above functions, but left them in the code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-05Input: omap-keypad - drop empty PM stubsDmitry Torokhov1-21/+0
There is no reason to have empty suspend and resume stubs. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-05Input: omap-keypad - remove adjusting of scan delayDmitry Torokhov1-5/+1
As of 35f8679f577ae5673a778598bcbe7b45cbec8923 ("Input: omap-keypad - remove dead check") we no longer declare keypresses as spurious, therefore we can use constant delay between scans. Suggested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-05Input: xpad - add Mad Catz FightStick TE 2 VID/PIDSilvan Jegen1-0/+2
This adds the VID/PID combination for the Xbox One version of the Mad Catz FightStick TE 2. The functionality that this provides is about on par with what the Windows drivers for the stick manage to deliver. What works: - Digital stick - 6 main buttons - Xbox button - The two buttons on the back - The locking buttons (preventing accidental Xbox button press) What doesn't work: - Two of the main buttons (don't work on Windows either) - The "Haptic" button setting does not have an effect (not sure if it works on Windows) I added the MAP_TRIGGERS_TO_BUTTONS option but in my (limited) testing there was no practical difference with or without. The FightStick does not have triggers though so adding it makes sense. Signed-off-by: Silvan Jegen <s.jegen@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-31Input: kbtab - stop saving struct usb_deviceOliver Neukum1-4/+4
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-31Input: gtco - stop saving struct usb_deviceOliver Neukum1-12/+12
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-31Input: aiptek - stop saving struct usb_deviceOliver Neukum1-9/+11
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-31Input: acecad - stop saving struct usb_deviceOliver Neukum1-6/+6
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-31Input: gtco - fix crash on detecting device without endpointsVladis Dronov1-1/+9
The gtco driver expects at least one valid endpoint. If given malicious descriptors that specify 0 for the number of endpoints, it will crash in the probe function. Ensure there is at least one endpoint on the interface before using it. Also let's fix a minor coding style issue. The full correct report of this issue can be found in the public Red Hat Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1283385 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-30input: ad7879: use gpiochip data pointerLinus Walleij1-5/+5
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30input: adp5589-keys: use gpiochip data pointerLinus Walleij1-6/+6
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-25Merge branch 'akpm' (patches from Andrew)Linus Torvalds4-9/+7
Merge fourth patch-bomb from Andrew Morton: "A lot more stuff than expected, sorry. A bunch of ocfs2 reviewing was finished off. - mhocko's oom-reaper out-of-memory-handler changes - ocfs2 fixes and features - KASAN feature work - various fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (42 commits) thp: fix typo in khugepaged_scan_pmd() MAINTAINERS: fill entries for KASAN mm/filemap: generic_file_read_iter(): check for zero reads unconditionally kasan: test fix: warn if the UAF could not be detected in kmalloc_uaf2 mm, kasan: stackdepot implementation. Enable stackdepot for SLAB arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections mm, kasan: add GFP flags to KASAN API mm, kasan: SLAB support kasan: modify kmalloc_large_oob_right(), add kmalloc_pagealloc_oob_right() include/linux/oom.h: remove undefined oom_kills_count()/note_oom_kill() mm/page_alloc: prevent merging between isolated and other pageblocks drivers/memstick/host/r592.c: avoid gcc-6 warning ocfs2: extend enough credits for freeing one truncate record while replaying truncate records ocfs2: extend transaction for ocfs2_remove_rightmost_path() and ocfs2_update_edge_lengths() before to avoid inconsistency between inode and et ocfs2/dlm: move lock to the tail of grant queue while doing in-place convert ocfs2: solve a problem of crossing the boundary in updating backups ocfs2: fix occurring deadlock by changing ocfs2_wq from global to local ocfs2/dlm: fix BUG in dlm_move_lockres_to_recovery_list ocfs2/dlm: fix race between convert and recovery ocfs2: fix a deadlock issue in ocfs2_dio_end_io_write() ...
2016-03-25Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds8-217/+449
Pull more input updates from Dmitry Torokhov: "Second round of updates for the input subsystem. The BYD PS/2 protocol driver now uses absolute reporting mode and should behave more like other touchpads; Synaptics driver needed to extend one of its quirks to a newer firmware version, and a few USB drivers got tightened up checks for the contents of their descriptors" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sur40 - fix DMA on stack Input: ati_remote2 - fix crashes on detecting device with invalid descriptor Input: synaptics - handle spurious release of trackstick buttons, again Input: synaptics-rmi4 - remove check of Non-NULL array Input: byd - enable absolute mode Input: ims-pcu - sanity check against missing interfaces Input: melfas_mip4 - add hw_version sysfs attribute
2016-03-25drivers/input: eliminate INPUT_COMPAT_TEST macroAndrew Morton4-9/+7
INPUT_COMPAT_TEST became much simpler after commit f4056b52845283 ("input: redefine INPUT_COMPAT_TEST as in_compat_syscall()") so we can cleanly eliminate it altogether. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-23Input: sur40 - fix DMA on stackOliver Neukum1-7/+14
During the initialisation the driver uses a buffer on the stack for DMA. That violates the cache coherency rules. The fix is to allocate the buffer with kmalloc(). Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-23Input: ati_remote2 - fix crashes on detecting device with invalid descriptorVladis Dronov1-6/+30
The ati_remote2 driver expects at least two interfaces with one endpoint each. If given malicious descriptor that specify one interface or no endpoints, it will crash in the probe function. Ensure there is at least two interfaces and one endpoint for each interface before using it. The full disclosure: http://seclists.org/bugtraq/2016/Mar/90 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-22input: redefine INPUT_COMPAT_TEST as in_compat_syscall()Andy Lutomirski1-11/+1
The input compat code should work like all other compat code: for 32-bit syscalls, use the 32-bit ABI and for 64-bit syscalls, use the 64-bit ABI. We have a helper for that (in_compat_syscall()): just use it. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-18Merge tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds3-0/+606
Pull MFD updates from Lee Jones: "New Drivers: - Freescale Touch Screen ADC - X-Powers AXP PMIC with RSB - TI TPS65086 Power Management IC (PMIC) New Device Support: - Supply device PCI IDs for Intel Broxton Fix-ups: - Move to clkdev_create() API; intel_quark_i2c_gpio - Complete re-write of TI's TPS65912 Power Management IC (PMIC) - Remove unnecessary function argument; axp20x - Separate out bus related code; axp20x - Coding Style changes; axp20x - Allow more drivers to be compiled as modules - Work around false positive 'used uninitialised' warning; db8500-prcmu Bug Fixes: - Remove do_div(); fsl-imx25-gcq - Fix driver init when built-in; tps65010 - Fix clock-unregister leak; intel-lpss" * tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: intel-lpss: Pass I2C configuration via properties on BXT mfd: imx6sx: Add PCIe register definitions for iomuxc gpr mfd: ipaq-micro: Use __maybe_unused to hide pm functions mfd: max77686: Add max77802 to I2C device ID table mfd: max77686: Export OF module alias information mfd: max77686: Allow driver to be built as a module mfd: stmpe: Add the proper PWM resources mfd: tps65090: Set regmap config reg counts properly mfd: syscon: Return ENOTSUPP instead of ENOSYS when disabled mfd: as3711: Set regmap config reg counts properly mfd: rc5t583: Set regmap config reg counts properly gpio: tps65086: Add GPO driver for the TPS65086 PMIC mfd: mt6397: Add platform device ID table mfd: da9063: Fix missing volatile registers in the core regmap_range volatile lists mfd: mt6397: Add MT6323 support to MT6397 driver mfd: mt6397: Add support for different Slave types mfd: mt6397: int_con and int_status may vary in location dt-bindings: mfd: Add bindings for the MediaTek MT6323 PMIC mfd: da9062: Fix missing volatile registers in the core regmap_range volatile lists mfd: Add documentation for ACT8945A DT bindings ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.