aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2011-05-17Input: tsc2007 - debounce pressure measurementThierry Reding1-1/+3
When the controller signals a pen-down event via the platform-specific GPIO, while the sample values indicate an invalid measurement, the measurement needs to be repeated. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: ad714x - fix captouch wheel option algorithmMichael Hennerich1-88/+17
As reported by Jean-Francois Dagenais, the wheel algorithm caused a divide by zero exception due to missing variable pre-initialization. In fact it turned out that the whole algorithm had several problems. It is therefore replaced with something that is known working. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: ad714x - allow platform code to specify irqflagsMichael Hennerich1-1/+3
Add option to specify irqflags in platfrom data. Also update copyright notice. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: ad714x - fix threshold and completion interrupt masksMichael Hennerich1-4/+4
Fix two issues in the threshold and completion interrupt mask and unmask functions. According to the AD714x datasheets the highest stage completion interrupt should be enabled. Fix mask computation. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: ad714x - fix up input configurationMichael Hennerich1-0/+8
Add missing input name and set up parent devices so input devices will show in proper places in sysfs tree. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: elantech - remove support for proprietary X driverÉric Piel1-12/+0
Apparently somewhere someone had a proprietary X driver. To get the multitouch info, it uses some hack on the normal API instead of using the multitouch protocol. Now that the multitouch info is transmitted correctly it makes not much sense to keep it. Especially because it's impossible to find this proprietary X driver anywhere, so the number of users must be very low. Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: elantech - report multitouch with proper ABS_MT messagesÉric Piel1-5/+34
Multitouch info was reported only via a old protocol used by the proprietary X driver from elantech. Let's report the multitouch info also following the official MT protocol. It's semi-mt because the device only reports the lowest/highest coordinates. This was done following the multi-touch-protocol.txt documentation, and inspired by the bcm5974 and elantech implementations. Testing was light as there is not many applications using this protocol yet, but the X synaptics driver didn't complain and the X multitouch driver behaved correctly. Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-16Input: elantech - export pressure and width when supportedÉric Piel2-1/+28
Using the info of the Dell/Ubuntu driver, described in the protocol document, report both width and pressure when pressing 1 and 3 fingers, for the versions of the touchpad which support it. Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-14Input: atmel_tsadcc - correct call to input_free_deviceJulia Lawall1-1/+1
This error handling code can be reached before ts_dev->input is initialized, so it is safer to always use the original name, input_dev. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12arch/tile: finish enabling support for TILE-Gx 64-bit chipChris Metcalf1-1/+1
This support was partially present in the existing code (look for "__tilegx__" ifdefs) but with this change you can build a working kernel using the TILE-Gx toolchain and ARCH=tilegx. Most of these files are new, generally adding a foo_64.c file where previously there was just a foo_32.c file. The ARCH=tilegx directive redirects to arch/tile, not arch/tilegx, using the existing SRCARCH mechanism in the top-level Makefile. Changes to existing files: - <asm/bitops.h> and <asm/bitops_32.h> changed to factor the include of <asm-generic/bitops/non-atomic.h> in the common header. - <asm/compat.h> and arch/tile/kernel/compat.c changed to remove the "const" markers I had put on compat_sys_execve() when trying to match some recent similar changes to the non-compat execve. It turns out the compat version wasn't "upgraded" to use const. - <asm/opcode-tile_64.h> and <asm/opcode_constants_64.h> were previously included accidentally, with the 32-bit contents. Now they have the proper 64-bit contents. Finally, I had to hack the existing hacky drivers/input/input-compat.h to add yet another "#ifdef" for INPUT_COMPAT_TEST (same as x86_64). Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [drivers/input]
2011-05-12Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-3/+10
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ads7846 - remove unused variable from struct ads7845_ser_req Input: ads7846 - make transfer buffers DMA safe
2011-05-12Input: add driver FSL MPR121 capacitive touch sensorZhang Jiejing3-0/+352
This patch adds basic support for Freescale MPR121 capacitive touch sensor. It's an i2c controller with up to 12 capacitance sensing inputs. Product information (data sheet, application notes) can be found here: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPR121 Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12Input: remove useless synchronize_rcu() callsEric Dumazet4-5/+0
There is no need to call synchronize_rcu() after a list insertion, or a NULL->ptr assignment. However, the reverse operations do need this call. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12Input: ads7846 - fix gpio_pendown configurationIgor Grinberg1-0/+7
The pendown gpio was requested but not configured for input. Configure it for input. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12Input: ads7846 - add possibility to use external vref on ads7846Alexander Stein1-8/+11
Just set vref_mv in your platform config to use external vref. Otherwise the internal one is used. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-12Input: rotary-encoder - add support for half-period encodersJohan Hovold1-3/+39
Add support for encoders that have two detents per input signal period. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-11Input: rotary-encoder - refactor and clean upJohan Hovold1-32/+43
Refactor state retrieval and event reporting in interrupt handler. Remove a few empty lines. Signed-off-by: Johan Hovold <jhovold@gmail.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-11Input: tegra-kbc - change wakeup logic to be all or nothingRakesh Iyer1-22/+2
Tegra hardware design cannot reliably support an arbitrary set of keys waking up the system. Modify wakeup logic so either any key wakes the system up or none will do. Signed-off-by: Rakesh Iyer <riyer@nvidia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05Input: ads7846 - remove unused variable from struct ads7845_ser_reqAlexander Stein1-1/+0
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05Input: ads7846 - make transfer buffers DMA safeAlexander Stein1-2/+10
req.sample needs its own cacheline otherwise accessing req.msg fetches it in again. Note: This effect doesn't occur if the underlying SPI driver doesn't use DMA at all. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05Input: ati_remote2 - return the error code from sysfs channel_mask storeVille Syrjala1-3/+6
If the channel_mask setup fails when configuring it through sysfs, return the error code to the caller instead of claiming success. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-05Input: sh_keysc - only compile PM code if PM is enabledDmitry Torokhov1-4/+4
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-03Input: h3600_ts_input - fix a leak of the IRQ during init failureAxel Lin1-4/+4
Make sure we are passing the same cookie in all calls to request_irq() and free_irq(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-03Input: sh_keysc - make sh_keysc_device_driver staticDmitry Torokhov1-1/+1
This variable is not used outside of the module so we should mark it as static. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-02Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-11/+64
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wm831x-ts - move BTN_TOUCH reporting to data transfer Input: wm831x-ts - allow IRQ flags to be specified Input: wm831x-ts - fix races with IRQ management
2011-04-28Input: sh_keysc - switch to threaded IRQ handlerMagnus Damm1-1/+2
Update the KEYSC driver to make use of threaded IRQs with IRQF_ONESHOT to improve interrupt latency. The driver is using udelay() in the ISR to make sure the hardware has stabilized. Without using interrupt threads this delay may affect the latency of the rest of the system. Also pass dev_name() as string for /proc/interrupts. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-28Input: sh_keysc - implement runtime PM supportMagnus Damm1-25/+15
Convert the KEYSC driver from MSTP bit control through a magic clock string to making use of Runtime PM. Also, update the system suspend/resume callbacks to drop the Runtime PM reference in the case of wakeup disabled. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: input-polldev - use system-wide freezable workqueueDmitry Torokhov1-53/+3
With introduction of concurrency-managed work queues there is rarely a point in creating private workqueues. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: tegra-kbc - add ghost key filterRakesh Iyer1-0/+36
Add ghost key filtering support for the Nvidia Tegra matrix keyboard. Signed-off-by: Rakesh Iyer <riyer@nvidia.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: wm831x-ts - move BTN_TOUCH reporting to data transferMark Brown1-3/+2
Don't report BTN_TOUCH until we've got data as some less robust applications can be confused by getting a touch event by itself and it doesn't seem unreasonable for them to expect coordinates along with a touch. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: wm831x-ts - allow IRQ flags to be specifiedMark Brown1-3/+13
This allows maximum flexibility for configuring the direct GPIO based interrupts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: wm831x-ts - fix races with IRQ managementMark Brown1-5/+49
If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: twl4030-pwrbutton - fix a leak of the IRQ during init failureAxel Lin1-1/+1
In twl4030_pwrbutton_probe error path, free_irq() was using NULL rather than the driver data as the data pointer so free_irq() wouldn't have matched. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: omap-keypad - fix a wrong free_irq() parameterAxel Lin1-3/+3
In current implementation, free_irq() was using NULL rather than the driver data as the data pointer so free_irq() wouldn't have matched. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: qt1070 - add MODULE_DEVICE_TABLEAxel Lin1-0/+1
Adding the necessary MODULE_DEVICE_TABLE() information allows the driver to be automatically loaded by udev Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-26Input: evdev - only signal polls on full packetsJeff Brown1-6/+11
This patch modifies evdev so that it only becomes readable when the buffer contains an EV_SYN/SYN_REPORT event. On SMP systems, it is possible for an evdev client blocked on poll() to wake up and read events from the evdev ring buffer at the same rate as they are enqueued. This can result in high CPU usage, particularly for MT devices, because the client ends up reading events one at a time instead of reading complete packets. We eliminate this problem by making the device readable only when the buffer contains at least one complete packet. This causes clients to block until the entire packet is available. Signed-off-by: Jeff Brown <jeffbrown@android.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-22Merge commit 'v2.6.39-rc4' into nextDmitry Torokhov54-265/+611
2011-04-22tty: make receive_buf() return the amout of bytes receivedFelipe Balbi1-2/+8
it makes it simpler to keep track of the amount of bytes received and simplifies how flush_to_ldisc counts the remaining bytes. It also fixes a bug of lost bytes on n_tty when flushing too many bytes via the USB serial gadget driver. Tested-by: Stefan Bigler <stefan.bigler@keymile.com> Tested-by: Toby Gray <toby.gray@realvnc.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-18Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds5-22/+87
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xen-kbdfront - fix mouse getting stuck after save/restore Input: estimate number of events per packet Input: evdev - indicate buffer overrun with SYN_DROPPED Input: document event types and codes and their intended use Input: add KEY_IMAGES specifically for AL Image Browser Input: twl4030_keypad - fix potential NULL dereference in twl4030_kp_probe() Input: h3600_ts - fix error handling at connect Input: twl4030_keypad - avoid potential NULL-pointer dereference
2011-04-18Input: xen-kbdfront - fix mouse getting stuck after save/restoreIgor Mammedov1-1/+12
Mouse gets "stuck" after restore of PV guest but buttons are in working condition. If driver has been configured for ABS coordinates at start it will get XENKBD_TYPE_POS events and then suddenly after restore it'll start getting XENKBD_TYPE_MOTION events, that will be dropped later and they won't get into user-space. Regression was introduced by hunk 5 and 6 of 5ea5254aa0ad269cfbd2875c973ef25ab5b5e9db ("Input: xen-kbdfront - advertise either absolute or relative coordinates"). Driver on restore should ask xen for request-abs-pointer again if it is available. So restore parts that did it before 5ea5254. Acked-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Igor Mammedov <imammedo@redhat.com> [v1: Expanded the commit description] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-18Input: estimate number of events per packetJeff Brown1-0/+40
Calculate a default based on the number of ABS axes, REL axes, and MT slots for the device during input device registration. Signed-off-by: Jeff Brown <jeffbrown@android.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-12Input: evdev - indicate buffer overrun with SYN_DROPPEDJeff Brown1-12/+21
Add a new EV_SYN code, SYN_DROPPED, to inform the client when input events have been dropped from the evdev input buffer due to a buffer overrun. The client should use this event as a hint to reset its state or ignore all following events until the next packet begins. Signed-off-by: Jeff Brown <jeffbrown@android.com> [dtor@mail.ru: Implement Henrik's suggestion and drop old events in case of overflow.] Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-12Input: atmel_mxt_ts - convert to MT protocol BJoonyoung Shim1-12/+15
Atmel touchscreen chips can use MT protocol B because they can assign unique id to ABS_MT_TRACKING_ID from finger id provided by hardware. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-12Input: atmel_mxt_ts - make CHG line high after enabling interruptsIiro Valkonen1-4/+8
Make the CHG line (interrupt line) go high after the interrupts have been enabled to make sure we don't miss the falling edge. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-12Input: atmel_mxt_ts - support 12bit resolutionJoonyoung Shim1-14/+39
Atmel touchscreen chip can support 12bit resolution and this patch modifies to get maximum x and y size from platform data. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-11Input: add driver for Maxim max11801 touchscreen controllerZhang Jiejing3-0/+285
Add MAXI max11801 resistive touchscreen controller driver. This driver uses Auto Mode and Aperture Mode. Support for other max1180x devices can be added to this driver as well, as they use almost the same register addresses and codes. You can find data sheet here: http://www.maxim-ic.com/datasheet/index.mvp/id/5943 Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-11Input: gpio-keys - add support for setting device nameAlexander Stein1-1/+1
This patch allows to set a device name which helps distinguishing several gpio-keys devices. Signed-off-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-11Input: gpio_keys - add support for EV_ABSAlexander Stein1-2/+7
With this patch you can setup a group of GPIOs representing a specific position on an EV_ABS axis. Signed-off-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-11Input: twl4030_keypad - fix potential NULL dereference in twl4030_kp_probe()Axel Lin1-1/+3
We should first check whether platform data is NULL or not, before dereferencing it to get the keymap. Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds17-20/+20
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.