| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Warn if a host bridge has no NUMA info (Yunsheng Lin)
- Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
Efremov)
Resource management:
- Fix boot-time Embedded Controller GPE storm caused by incorrect
resource assignment after ACPI Bus Check Notification (Mika
Westerberg)
- Protect pci_reassign_bridge_resources() against concurrent
addition/removal (Benjamin Herrenschmidt)
- Fix bridge dma_ranges resource list cleanup (Rob Herring)
- Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
the MMIO and prefetchable MMIO window sizes of hotplug bridges
independently (Nicholas Johnson)
- Fix MMIO/MMIO_PREF window assignment that assigned more space than
desired (Nicholas Johnson)
- Only enforce bus numbers from bridge EA if the bridge has EA
devices downstream (Subbaraya Sundeep)
- Consolidate DT "dma-ranges" parsing and convert all host drivers to
use shared parsing (Rob Herring)
Error reporting:
- Restore AER capability after resume (Mayurkumar Patel)
- Add PoisonTLPBlocked AER counter (Rajat Jain)
- Use for_each_set_bit() to simplify AER code (Andy Shevchenko)
- Fix AER kernel-doc (Andy Shevchenko)
- Add "pcie_ports=dpc-native" parameter to allow native use of DPC
even if platform didn't grant control over AER (Olof Johansson)
Hotplug:
- Avoid returning prematurely from sysfs requests to enable or
disable a PCIe hotplug slot (Lukas Wunner)
- Don't disable interrupts twice when suspending hotplug ports (Mika
Westerberg)
- Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
Westerberg)
Power management:
- Remove unnecessary ASPM locking (Bjorn Helgaas)
- Add support for disabling L1 PM Substates (Heiner Kallweit)
- Allow re-enabling Clock PM after it has been disabled (Heiner
Kallweit)
- Add sysfs attributes for controlling ASPM link states (Heiner
Kallweit)
- Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
sysfs files (Heiner Kallweit)
- Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
USB 2.0 or 1.1 connect events (Kai-Heng Feng)
- Move power state check out of pci_msi_supported() (Bjorn Helgaas)
- Fix incorrect MSI-X masking on resume and revert related nvme quirk
for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)
- Always return devices to D0 when thawing to fix hibernation with
drivers like mlx4 that used legacy power management (previously we
only did it for drivers with new power management ops) (Dexuan Cui)
- Clear PCIe PME Status even for legacy power management (Bjorn
Helgaas)
- Fix PCI PM documentation errors (Bjorn Helgaas)
- Use dev_printk() for more power management messages (Bjorn Helgaas)
- Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)
- Convert xen-platform from legacy to generic power management (Bjorn
Helgaas)
- Removed unused .resume_early() and .suspend_late() legacy power
management hooks (Bjorn Helgaas)
- Rearrange power management code for clarity (Rafael J. Wysocki)
- Decode power states more clearly ("4" or "D4" really refers to
"D3cold") (Bjorn Helgaas)
- Notice when reading PM Control register returns an error (~0)
instead of interpreting it as being in D3hot (Bjorn Helgaas)
- Add missing link delays required by the PCIe spec (Mika Westerberg)
Virtualization:
- Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
Helgaas)
- Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
previously didn't recognize that) (Kuppuswamy Sathyanarayanan)
- Allow VFs to use PASID (the PF PASID capability is shared by the
VFs, but the code previously didn't recognize that) (Kuppuswamy
Sathyanarayanan)
- Disconnect PF and VF ATS enablement, since ATS in PFs and
associated VFs can be enabled independently (Kuppuswamy
Sathyanarayanan)
- Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)
- Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)
- Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
Wilczynski)
- Remove unused PRI and PASID stubs (Bjorn Helgaas)
- Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
interfaces that are only used by built-in IOMMU drivers (Bjorn
Helgaas)
- Hide PRI and PASID state restoration functions used only inside the
PCI core (Bjorn Helgaas)
- Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)
- Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)
- Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
Cherian)
- Fix the UPDCR register address in the Intel ACS quirk (Steffen
Liebergeld)
- Unify ACS quirk implementations (Bjorn Helgaas)
Amlogic Meson host bridge driver:
- Fix meson PERST# GPIO polarity problem (Remi Pommarel)
- Add DT bindings for Amlogic Meson G12A (Neil Armstrong)
- Fix meson clock names to match DT bindings (Neil Armstrong)
- Add meson support for Amlogic G12A SoC with separate shared PHY
(Neil Armstrong)
- Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
combo PHY (Neil Armstrong)
- Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)
- Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
(Neil Armstrong)
Broadcom iProc host bridge driver:
- Invalidate iProc PAXB address mapping before programming it
(Abhishek Shah)
- Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)
Cadence host bridge driver:
- Refactor Cadence PCIe host controller to use as a library for both
host and endpoint (Tom Joseph)
Freescale Layerscape host bridge driver:
- Add layerscape LS1028a support (Xiaowei Bao)
Intel VMD host bridge driver:
- Add VMD bus 224-255 restriction decode (Jon Derrick)
- Add VMD 8086:9A0B device ID (Jon Derrick)
- Remove Keith from VMD maintainer list (Keith Busch)
Marvell ARMADA 3700 / Aardvark host bridge driver:
- Use LTSSM state to build link training flag since Aardvark doesn't
implement the Link Training bit (Remi Pommarel)
- Delay before training Aardvark link in case PERST# was asserted
before the driver probe (Remi Pommarel)
- Fix Aardvark issues with Root Control reads and writes (Remi
Pommarel)
- Don't rely on jiffies in Aardvark config access path since
interrupts may be disabled (Remi Pommarel)
- Fix Aardvark big-endian support (Grzegorz Jaszczyk)
Marvell ARMADA 370 / XP host bridge driver:
- Make mvebu_pci_bridge_emul_ops static (Ben Dooks)
Microsoft Hyper-V host bridge driver:
- Add hibernation support for Hyper-V virtual PCI devices (Dexuan
Cui)
- Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
Cui)
- Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)
Mobiveil host bridge driver:
- Change mobiveil csr_read()/write() function names that conflict
with riscv arch functions (Kefeng Wang)
NVIDIA Tegra host bridge driver:
- Fix Tegra CLKREQ dependency programming (Vidya Sagar)
Renesas R-Car host bridge driver:
- Remove unnecessary header include from rcar (Andrew Murray)
- Tighten register index checking for rcar inbound range programming
(Marek Vasut)
- Fix rcar inbound range alignment calculation to improve packing of
multiple entries (Marek Vasut)
- Update rcar MACCTLR setting to match documentation (Yoshihiro
Shimoda)
- Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
(Yoshihiro Shimoda)
- Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
Horman)
Rockchip host bridge driver:
- Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
Murphy)
Socionext UniPhier host bridge driver:
- Set uniphier to host (RC) mode always (Kunihiko Hayashi)
Endpoint drivers:
- Fix endpoint driver sign extension problem when shifting page
number to phys_addr_t (Alan Mikhak)
Misc:
- Add NumaChip SPDX header (Krzysztof Wilczynski)
- Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)
- Remove unused includes (Krzysztof Wilczynski)
- Removed unused sysfs attribute groups (Ben Dooks)
- Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)
- Add PCIe Link Control 2 register field definitions to replace magic
numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)
- Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)
- Use pcie_capability_read_word() instead of pci_read_config_word()
in AMDGPU and Radeon CIK/SI (Frederick Lawler)
- Remove unused pci_irq_get_node() Greg Kroah-Hartman)
- Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
(Palmer Dabbelt, Michal Simek)
- Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
Helgaas)
- Fix bridge emulation big-endian support (Grzegorz Jaszczyk)
- Fix dwc find_next_bit() usage (Niklas Cassel)
- Fix pcitest.c fd leak (Hewenliang)
- Fix typos and comments (Bjorn Helgaas)
- Fix Kconfig whitespace errors (Krzysztof Kozlowski)"
* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
asm-generic: Make msi.h a mandatory include/asm header
Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
PCI/MSI: Fix incorrect MSI-X masking on resume
PCI/MSI: Move power state check out of pci_msi_supported()
PCI/MSI: Remove unused pci_irq_get_node()
PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
PCI: hv: Change pci_protocol_version to per-hbus
PCI: hv: Add hibernation support
PCI: hv: Reorganize the code in preparation of hibernation
MAINTAINERS: Remove Keith from VMD maintainer
PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
PCI/ASPM: Add sysfs attributes for controlling ASPM link states
PCI: Fix indentation
drm/radeon: Prefer pcie_capability_read_word()
drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
drm/radeon: Correct Transmit Margin masks
drm/amdgpu: Prefer pcie_capability_read_word()
PCI: uniphier: Set mode register to host mode
drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
...
|
|
Pull iommu updates from Joerg Roedel:
- Conversion of the AMD IOMMU driver to use the dma-iommu code for
imlementing the DMA-API. This gets rid of quite some code in the
driver itself, but also has some potential for regressions (non are
known at the moment).
- Support for the Qualcomm SMMUv2 implementation in the SDM845 SoC.
This also includes some firmware interface changes, but those are
acked by the respective maintainers.
- Preparatory work to support two distinct page-tables per domain in
the ARM-SMMU driver
- Power management improvements for the ARM SMMUv2
- Custom PASID allocator support
- Multiple PCI DMA alias support for the AMD IOMMU driver
- Adaption of the Mediatek driver to the changed IO/TLB flush interface
of the IOMMU core code.
- Preparatory patches for the Renesas IOMMU driver to support future
hardware.
* tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (62 commits)
iommu/rockchip: Don't provoke WARN for harmless IRQs
iommu/vt-d: Turn off translations at shutdown
iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved
iommu/arm-smmu: Remove duplicate error message
iommu/arm-smmu-v3: Don't display an error when IRQ lines are missing
iommu/ipmmu-vmsa: Add utlb_offset_base
iommu/ipmmu-vmsa: Add helper functions for "uTLB" registers
iommu/ipmmu-vmsa: Calculate context registers' offset instead of a macro
iommu/ipmmu-vmsa: Add helper functions for MMU "context" registers
iommu/ipmmu-vmsa: tidyup register definitions
iommu/ipmmu-vmsa: Remove all unused register definitions
iommu/mediatek: Reduce the tlb flush timeout value
iommu/mediatek: Get rid of the pgtlock
iommu/mediatek: Move the tlb_sync into tlb_flush
iommu/mediatek: Delete the leaf in the tlb_flush
iommu/mediatek: Use gather to achieve the tlb range flush
iommu/mediatek: Add a new tlb_lock for tlb_flush
iommu/mediatek: Correct the flush_iotlb_all callback
iommu/io-pgtable-arm: Rename IOMMU_QCOM_SYS_CACHE and improve doc
iommu/io-pgtable-arm: Rationalise MAIR handling
...
|
|
Pull Hyper-V updates from Sasha Levin:
- support for new VMBus protocols (Andrea Parri)
- hibernation support (Dexuan Cui)
- latency testing framework (Branden Bonaby)
- decoupling Hyper-V page size from guest page size (Himadri Pandya)
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic
drivers/hv: Replace binary semaphore with mutex
drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86
HID: hyperv: Add the support of hibernation
hv_balloon: Add the support of hibernation
x86/hyperv: Implement hv_is_hibernation_supported()
Drivers: hv: balloon: Remove dependencies on guest page size
Drivers: hv: vmbus: Remove dependencies on guest page size
x86: hv: Add function to allocate zeroed page for Hyper-V
Drivers: hv: util: Specify ring buffer size using Hyper-V page size
Drivers: hv: Specify receive buffer size using Hyper-V page size
tools: hv: add vmbus testing tool
drivers: hv: vmbus: Introduce latency testing
video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver
video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host
hv_netvsc: Add the support of hibernation
hv_sock: Add the support of hibernation
video: hyperv_fb: Add the support of hibernation
scsi: storvsc: Add the support of hibernation
Drivers: hv: vmbus: Add module parameter to cap the VMBus version
...
|
|
Pull dma-mapping updates from Christoph Hellwig:
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using DMA offsets
(Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:
* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
dma-mapping: treat dev->bus_dma_mask as a DMA limit
dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
dma-direct: don't check swiotlb=force in dma_direct_map_resource
dma-debug: clean up put_hash_bucket()
powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
dma-direct: avoid a forward declaration for phys_to_dma
dma-direct: unify the dma_capable definitions
dma-mapping: drop the dev argument to arch_sync_dma_for_*
x86/PCI: sta2x11: use default DMA address translation
dma-direct: check for overflows on 32 bit DMA addresses
dma-debug: increase HASH_SIZE
dma-debug: reorder struct dma_debug_entry fields
xtensa: use the generic uncached segment support
dma-mapping: merge the generic remapping helpers into dma-direct
dma-direct: provide mmap and get_sgtable method overrides
dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
dma-direct: remove __dma_direct_free_pages
usb: core: Remove redundant vmap checks
kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
dma-debug: add a schedule point in debug_dma_dump_mappings()
...
|
|
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
Helgaas)
- Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas)
- Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
previously didn't recognize that) (Kuppuswamy Sathyanarayanan)
- Allow VFs to use PASID (the PF PASID capability is shared by the VFs,
but the code previously didn't recognize that) (Kuppuswamy
Sathyanarayanan)
- Disconnect PF and VF ATS enablement, since ATS in PFs and associated
VFs can be enabled independently (Kuppuswamy Sathyanarayanan)
- Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)
- Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)
- Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski)
- Remove unused PRI and PASID stubs (Bjorn Helgaas)
- Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas)
- Hide PRI and PASID state restoration functions used only inside the PCI
core (Bjorn Helgaas)
- Fix the UPDCR register address in the Intel ACS quirk (Steffen
Liebergeld)
- Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)
- Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)
- Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian)
- Unify ACS quirk implementations (Bjorn Helgaas)
* pci/virtualization:
PCI: Unify ACS quirk desired vs provided checking
PCI: Make ACS quirk implementations more uniform
PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3
PCI/IOV: Serialize sysfs sriov_numvfs reads vs writes
PCI: Add DMA alias quirk for Intel VCA NTB
PCI: Fix Intel ACS quirk UPDCR register address
PCI/ATS: Make pci_restore_pri_state(), pci_restore_pasid_state() private
PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL()
PCI/ATS: Remove unused PRI and PASID stubs
PCI/ATS: Consolidate ATS declarations in linux/pci-ats.h
PCI/ATS: Cache PRI PRG Response PASID Required bit
PCI/ATS: Cache PASID Capability offset
PCI/ATS: Cache PRI Capability offset
PCI/ATS: Disable PF/VF ATS service independently
PCI/ATS: Handle sharing of PF PASID Capability with all VFs
PCI/ATS: Handle sharing of PF PRI Capability with all VFs
PCI/ATS: Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI
iommu/vt-d: Select PCI_PRI for INTEL_IOMMU_SVM
|
|
- Add NumaChip SPDX header (Krzysztof Wilczynski)
- Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)
- Remove unused includes (Krzysztof Wilczynski)
- Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB
2.0 or 1.1 connect events (Kai-Heng Feng)
- Removed unused sysfs attribute groups (Ben Dooks)
- Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)
- Add PCIe Link Control 2 register field definitions to replace magic
numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)
- Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon
CIK/SI PCIe Gen3 link training (Bjorn Helgaas)
- Use pcie_capability_read_word() instead of pci_read_config_word() in
AMDGPU and Radeon CIK/SI (Frederick Lawler)
* pci/misc:
drm/radeon: Prefer pcie_capability_read_word()
drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
drm/radeon: Correct Transmit Margin masks
drm/amdgpu: Prefer pcie_capability_read_word()
drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
drm/amdgpu: Correct Transmit Margin masks
PCI: Add #defines for Enter Compliance, Transmit Margin
PCI: Allow building PCIe things without PCIEPORTBUS
PCI: Remove PCIe Kconfig dependencies on PCI
PCI/ASPM: Remove dependency on PCIEPORTBUS
PCI/PTM: Remove dependency on PCIEPORTBUS
PCI/PTM: Remove spurious "d" from granularity message
PCI: sysfs: Remove unused attribute groups
x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect
PCI: Remove unused includes and superfluous struct declaration
x86/PCI: Replace deprecated EXTRA_CFLAGS with ccflags-y
x86/PCI: Correct SPDX comment style
x86/PCI: Add NumaChip SPDX GPL-2.0 to replace COPYING boilerplate
|
|
* acpi-utils:
iommu/amd: Switch to use acpi_dev_hid_uid_match()
mmc: sdhci-acpi: Switch to use acpi_dev_hid_uid_match()
ACPI / LPSS: Switch to use acpi_dev_hid_uid_match()
ACPI / utils: Introduce acpi_dev_hid_uid_match() helper
ACPI / utils: Move acpi_dev_get_first_match_dev() under CONFIG_ACPI
ACPI / utils: Describe function parameters in kernel-doc
* acpi-platform:
ACPI: platform: Unregister stale platform devices
ACPI: Always build evged in
* acpi-video:
ACPI: video: update doc for acpi_video_bus_DOS()
* acpi-doc:
ACPI: Documentation: Minor spelling fix in namespace.rst
|
|
Currently hyperv-iommu is implemented in a x86 specific way, for
example, apic is used. So make the HYPERV_IOMMU Kconfig depend on X86
as a preparation for enabling HyperV on architecture other than x86.
Cc: Lan Tianyu <Tianyu.Lan@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: linux-hyperv@vger.kernel.org
Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Using a mask to represent bus DMA constraints has a set of limitations.
The biggest one being it can only hold a power of two (minus one). The
DMA mapping code is already aware of this and treats dev->bus_dma_mask
as a limit. This quirk is already used by some architectures although
still rare.
With the introduction of the Raspberry Pi 4 we've found a new contender
for the use of bus DMA limits, as its PCIe bus can only address the
lower 3GB of memory (of a total of 4GB). This is impossible to represent
with a mask. To make things worse the device-tree code rounds non power
of two bus DMA limits to the next power of two, which is unacceptable in
this case.
In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all
over the tree and treat it as such. Note that dev->bus_dma_limit should
contain the higher accessible DMA address.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Remove <linux/pci.h> and <linux/msi.h> from being included directly as part
of the include/linux/of_pci.h, and remove superfluous declaration of struct
of_phandle_args.
Move users of include <linux/of_pci.h> to include <linux/pci.h> and
<linux/msi.h> directly rather than rely on both being included transitively
through <linux/of_pci.h>.
Link: https://lore.kernel.org/r/20190903113059.2901-1-kw@linux.com
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
These are pure cache maintainance routines, so drop the unused
struct device argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
|
|
Although we don't generally expect IRQs to fire for a suspended IOMMU,
there are certain situations (particularly with debug options) where
we might legitimately end up with the pm_runtime_get_if_in_use() call
from rk_iommu_irq() returning 0. Since this doesn't represent an actual
error, follow the other parts of the driver and save the WARN_ON()
condition for a genuine negative value. Even if we do have spurious
IRQs due to a wedged VOP asserting the shared line, it's not this
driver's job to try to second-guess the IRQ core to warn about that.
Reported-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The intel-iommu driver assumes that the iommu state is
cleaned up at the start of the new kernel.
But, when we try to kexec boot something other than the
Linux kernel, the cleanup cannot be relied upon.
Hence, cleanup before we go down for reboot.
Keeping the cleanup at initialization also, in case BIOS
leaves the IOMMU enabled.
I considered turning off iommu only during kexec reboot, but a clean
shutdown seems always a good idea. But if someone wants to make it
conditional, such as VMM live update, we can do that. There doesn't
seem to be such a condition at this time.
Tested that before, the info message
'DMAR: Translation was enabled for <iommu> but we are not in kdump mode'
would be reported for each iommu. The message will not appear when the
DMA-remapping is not enabled on entry to the kernel.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
VT-d RMRR (Reserved Memory Region Reporting) regions are reserved
for device use only and should not be part of allocable memory pool of OS.
BIOS e820_table reports complete memory map to OS, including OS usable
memory ranges and BIOS reserved memory ranges etc.
x86 BIOS may not be trusted to include RMRR regions as reserved type
of memory in its e820 memory map, hence validate every RMRR entry
with the e820 memory map to make sure the RMRR regions will not be
used by OS for any other purposes.
ia64 EFI is working fine so implement RMRR validation as a dummy function
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Yian Chen <yian.chen@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Since commit 7723f4c5ecdb ("driver core: platform: Add an error message
to platform_get_irq*()"), platform_get_irq() displays an error when the
IRQ isn't found. Remove the error print from the SMMU driver. Note the
slight change of behaviour: no message is printed if platform_get_irq()
returns -EPROBE_DEFER, which probably doesn't concern the SMMU.
Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Since commit 7723f4c5ecdb ("driver core: platform: Add an error message
to platform_get_irq*()"), platform_get_irq_byname() displays an error
when the IRQ isn't found. Since the SMMUv3 driver uses that function to
query which interrupt method is available, the message is now displayed
during boot for any SMMUv3 that doesn't implement the combined
interrupt, or that implements MSIs.
[ 20.700337] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ combined not found
[ 20.706508] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ eventq not found
[ 20.712503] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ priq not found
[ 20.718325] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ gerror not found
Use platform_get_irq_byname_optional() to avoid displaying a spurious
error.
Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Since we will have changed memory mapping of the IPMMU in the future,
this patch adds a utlb_offset_base into struct ipmmu_features
for IMUCTR and IMUASID registers. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Since we will have changed memory mapping of the IPMMU in the future,
This patch adds helper functions ipmmu_utlb_reg() and
ipmmu_imu{asid,ctr}_write() for "uTLB" registers. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Since we will have changed memory mapping of the IPMMU in the future,
this patch uses ipmmu_features values instead of a macro to
calculate context registers offset. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Since we will have changed memory mapping of the IPMMU in the future,
This patch adds helper functions ipmmu_ctx_{reg,read,write}()
for MMU "context" registers. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
To support different registers memory mapping hardware easily
in the future, this patch tidies up the register definitions
as below:
- Add comments to state to which SoCs or SoC families they apply
- Add categories about MMU "context" and uTLB registers
No change behavior.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
To support different registers memory mapping hardware easily
in the future, this patch removes all unused register
definitions.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Reduce the tlb timeout value from 100000us to 1000us. The original value
would make the kernel stuck for 100 ms with interrupts disabled, which
could have other side effects. The flush is expected to always take much
less than 1 ms, so use that instead.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Now we have tlb_lock for the HW tlb flush, then pgtable code hasn't
needed the external "pgtlock" for a while. this patch remove the
"pgtlock".
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Right now, the tlb_add_flush_nosync and tlb_sync always appear together.
we merge the two functions into one(also move the tlb_lock into the new
function). No functional change.
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In our tlb range flush, we don't care the "leaf". Remove it to simplify
the code. no functional change.
"granule" also is unnecessary for us, Keep it satisfy the format of
tlb_flush_walk.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Use the iommu_gather mechanism to achieve the tlb range flush.
Gather the iova range in the "tlb_add_page", then flush the merged iova
range in iotlb_sync.
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The commit 4d689b619445 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API
TLB sync") help move the tlb_sync of unmap from v7s into the iommu
framework. It helps add a new function "mtk_iommu_iotlb_sync", But it
lacked the lock, then it will cause the variable "tlb_flush_active"
may be changed unexpectedly, we could see this warning log randomly:
mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to
full flush
The HW requires tlb_flush/tlb_sync in pairs strictly, this patch adds
a new tlb_lock for tlb operations to fix this issue.
Fixes: 4d689b619445 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Use the correct tlb_flush_all instead of the original one.
Fixes: 4d689b619445 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The 'IOMMU_QCOM_SYS_CACHE' IOMMU protection flag is exposed to all
users of the IOMMU API. Despite its name, the idea behind it isn't
especially tied to Qualcomm implementations and could conceivably be
used by other systems.
Rename it to 'IOMMU_SYS_CACHE_ONLY' and update the comment to describe
a bit better the idea behind it.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Isaac J. Manjarres" <isaacm@codeaurora.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Between VMSAv8-64 and the various 32-bit formats, there is either one
64-bit MAIR or a pair of 32-bit MAIR0/MAIR1 or NMRR/PMRR registers.
As such, keeping two 64-bit values in io_pgtable_cfg has always been
overkill.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The nature of the LPAE format means that data->pg_shift is always
redundant with data->bits_per_level, since they represent the size of a
page and the number of PTEs per page respectively, and the size of a PTE
is constant. Thus it works out more efficient to only store the latter,
and derive the former via a trivial addition where necessary.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: Reworked granule check in iopte_to_paddr()]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We use data->pgd_size directly for the one-off allocation and freeing of
the top-level table, but otherwise it serves for ARM_LPAE_PGD_IDX() to
repeatedly re-calculate the effective number of top-level address bits
it represents. Flip this around so we store the form we most commonly
need, and derive the lesser-used one instead. This cuts a whole bunch of
code out of the map/unmap/iova_to_phys fast-paths.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Beyond a couple of allocation-time calculations, data->levels is only
ever used to derive the start level. Storing the start level directly
leads to a small reduction in object code, which should help eke out a
little more efficiency, and slightly more readable source to boot.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We're merely checking that the relevant upper bits of each address
are all zero, so there are cheaper ways to achieve that.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
It makes little sense to only validate the requested size after we think
we've found a matching block size - making the check up-front is simple,
and far more logical than waiting to walk off the bottom of the table to
infer that we must have been passed a bogus size to start with.
We're missing an equivalent check on the unmap path, so add that as well
for consistency.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The selftests run as an initcall, but the annotation of the various
callbacks and data seems to be somewhat arbitrary. Add it consistently
for everything related to the selftests.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Merge in ARM SMMU fixes to avoid conflicts in the ARM io-pgtable code.
* for-joerg/arm-smmu/fixes:
iommu/io-pgtable-arm: Support all Mali configurations
iommu/io-pgtable-arm: Correct Mali attributes
iommu/arm-smmu: Free context bitmap in the err path of arm_smmu_init_domain_context
|
|
Add reset hook for sdm845 based platforms to turn off
the wait-for-safe sequence.
Understanding how wait-for-safe logic affects USB and UFS performance
on MTP845 and DB845 boards:
Qcom's implementation of arm,mmu-500 adds a WAIT-FOR-SAFE logic
to address under-performance issues in real-time clients, such as
Display, and Camera.
On receiving an invalidation requests, the SMMU forwards SAFE request
to these clients and waits for SAFE ack signal from real-time clients.
The SAFE signal from such clients is used to qualify the start of
invalidation.
This logic is controlled by chicken bits, one for each - MDP (display),
IFE0, and IFE1 (camera), that can be accessed only from secure software
on sdm845.
This configuration, however, degrades the performance of non-real time
clients, such as USB, and UFS etc. This happens because, with wait-for-safe
logic enabled the hardware tries to throttle non-real time clients while
waiting for SAFE ack signals from real-time clients.
On mtp845 and db845 devices, with wait-for-safe logic enabled by the
bootloaders we see degraded performance of USB and UFS when kernel
enables the smmu stage-1 translations for these clients.
Turn off this wait-for-safe logic from the kernel gets us back the perf
of USB and UFS devices until we re-visit this when we start seeing perf
issues on display/camera on upstream supported SDM845 platforms.
The bootloaders on these boards implement secure monitor callbacks to
handle a specific command - QCOM_SCM_SVC_SMMU_PROGRAM with which the
logic can be toggled.
There are other boards such as cheza whose bootloaders don't enable this
logic. Such boards don't implement callbacks to handle the specific SCM
call so disabling this logic for such boards will be a no-op.
This change is inspired by the downstream change from Patrick Daly
to address performance issues with display and camera by handling
this wait-for-safe within separte io-pagetable ops to do TLB
maintenance. So a big thanks to him for the change and for all the
offline discussions.
Without this change the UFS reads are pretty slow:
$ time dd if=/dev/sda of=/dev/zero bs=1048576 count=10 conv=sync
10+0 records in
10+0 records out
10485760 bytes (10.0MB) copied, 22.394903 seconds, 457.2KB/s
real 0m 22.39s
user 0m 0.00s
sys 0m 0.01s
With this change they are back to rock!
$ time dd if=/dev/sda of=/dev/zero bs=1048576 count=300 conv=sync
300+0 records in
300+0 records out
314572800 bytes (300.0MB) copied, 1.030541 seconds, 291.1MB/s
real 0m 1.03s
user 0m 0.00s
sys 0m 0.54s
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When games, browser, or anything using a lot of GPU buffers exits, there
can be many hundreds or thousands of buffers to unmap and free. If the
GPU is otherwise suspended, this can cause arm-smmu to resume/suspend
for each buffer, resulting 5-10 seconds worth of reprogramming the
context bank (arm_smmu_write_context_bank()/arm_smmu_write_s2cr()/etc).
To the user it would appear that the system just locked up.
A simple solution is to use pm_runtime_put_autosuspend() instead, so we
don't immediately suspend the SMMU device.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Remove the variable of return. Issue found by
coccicheck(scripts/coccinelle/misc/returnvar.cocci)
Signed-off-by: Cristiane Naves <cristianenavescardoso09@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Non-Transparent Bridge (NTB) devices (among others) may have many DMA
aliases seeing the hardware will send requests with different device ids
depending on their origin across the bridged hardware.
See commit ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi Switchtec
NTB") for more information on this.
The AMD IOMMU IRQ remapping functionality ignores all PCI aliases for
IRQs so if devices send an interrupt from one of their aliases they
will be blocked on AMD hardware with the IOMMU enabled.
To fix this, ensure IRQ remapping is enabled for all aliases with
MSI interrupts.
This is analogous to the functionality added to the Intel IRQ remapping
code in commit 3f0c625c6ae7 ("iommu/vt-d: Allow interrupts from the entire
bus for aliased devices")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Non-Transparent Bridge (NTB) devices (among others) may have many DMA
aliases seeing the hardware will send requests with different device ids
depending on their origin across the bridged hardware.
See commit ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi
Switchtec NTB") for more information on this.
The AMD IOMMU ignores all the PCI aliases except the last one so DMA
transfers from these aliases will be blocked on AMD hardware with the
IOMMU enabled.
To fix this, ensure the DTEs are cloned for every PCI alias. This is
done by copying the DTE data for each alias as well as the IVRS alias
every time it is changed.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This cures a panic on restart after a kexec operation on 5.3 and 5.4
kernels.
The underlying state of the iommu registers (iommu->flags &
VTD_FLAG_TRANS_PRE_ENABLED) on a restart results in a domain being marked as
"DEFER_DEVICE_DOMAIN_INFO" that produces an Oops in identity_mapping().
[ 43.654737] BUG: kernel NULL pointer dereference, address:
0000000000000056
[ 43.655720] #PF: supervisor read access in kernel mode
[ 43.655720] #PF: error_code(0x0000) - not-present page
[ 43.655720] PGD 0 P4D 0
[ 43.655720] Oops: 0000 [#1] SMP PTI
[ 43.655720] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
5.3.2-1940.el8uek.x86_64 #1
[ 43.655720] Hardware name: Oracle Corporation ORACLE SERVER
X5-2/ASM,MOTHERBOARD,1U, BIOS 30140300 09/20/2018
[ 43.655720] RIP: 0010:iommu_need_mapping+0x29/0xd0
[ 43.655720] Code: 00 0f 1f 44 00 00 48 8b 97 70 02 00 00 48 83 fa ff
74 53 48 8d 4a ff b8 01 00 00 00 48 83 f9 fd 76 01 c3 48 8b 35 7f 58 e0
01 <48> 39 72 58 75 f2 55 48 89 e5 41 54 53 48 8b 87 28 02 00 00 4c 8b
[ 43.655720] RSP: 0018:ffffc9000001b9b0 EFLAGS: 00010246
[ 43.655720] RAX: 0000000000000001 RBX: 0000000000001000 RCX:
fffffffffffffffd
[ 43.655720] RDX: fffffffffffffffe RSI: ffff8880719b8000 RDI:
ffff8880477460b0
[ 43.655720] RBP: ffffc9000001b9e8 R08: 0000000000000000 R09:
ffff888047c01700
[ 43.655720] R10: 00002194036fc692 R11: 0000000000000000 R12:
0000000000000000
[ 43.655720] R13: ffff8880477460b0 R14: 0000000000000cc0 R15:
ffff888072d2b558
[ 43.655720] FS: 0000000000000000(0000) GS:ffff888071c00000(0000)
knlGS:0000000000000000
[ 43.655720] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 43.655720] CR2: 0000000000000056 CR3: 000000007440a002 CR4:
00000000001606b0
[ 43.655720] Call Trace:
[ 43.655720] ? intel_alloc_coherent+0x2a/0x180
[ 43.655720] ? __schedule+0x2c2/0x650
[ 43.655720] dma_alloc_attrs+0x8c/0xd0
[ 43.655720] dma_pool_alloc+0xdf/0x200
[ 43.655720] ehci_qh_alloc+0x58/0x130
[ 43.655720] ehci_setup+0x287/0x7ba
[ 43.655720] ? _dev_info+0x6c/0x83
[ 43.655720] ehci_pci_setup+0x91/0x436
[ 43.655720] usb_add_hcd.cold.48+0x1d4/0x754
[ 43.655720] usb_hcd_pci_probe+0x2bc/0x3f0
[ 43.655720] ehci_pci_probe+0x39/0x40
[ 43.655720] local_pci_probe+0x47/0x80
[ 43.655720] pci_device_probe+0xff/0x1b0
[ 43.655720] really_probe+0xf5/0x3a0
[ 43.655720] driver_probe_device+0xbb/0x100
[ 43.655720] device_driver_attach+0x58/0x60
[ 43.655720] __driver_attach+0x8f/0x150
[ 43.655720] ? device_driver_attach+0x60/0x60
[ 43.655720] bus_for_each_dev+0x74/0xb0
[ 43.655720] driver_attach+0x1e/0x20
[ 43.655720] bus_add_driver+0x151/0x1f0
[ 43.655720] ? ehci_hcd_init+0xb2/0xb2
[ 43.655720] ? do_early_param+0x95/0x95
[ 43.655720] driver_register+0x70/0xc0
[ 43.655720] ? ehci_hcd_init+0xb2/0xb2
[ 43.655720] __pci_register_driver+0x57/0x60
[ 43.655720] ehci_pci_init+0x6a/0x6c
[ 43.655720] do_one_initcall+0x4a/0x1fa
[ 43.655720] ? do_early_param+0x95/0x95
[ 43.655720] kernel_init_freeable+0x1bd/0x262
[ 43.655720] ? rest_init+0xb0/0xb0
[ 43.655720] kernel_init+0xe/0x110
[ 43.655720] ret_from_fork+0x24/0x50
Fixes: 8af46c784ecfe ("iommu/vt-d: Implement is_attach_deferred iommu ops entry")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Acer Aspire A315-41 requires the very same workaround as the existing
quirk for Dell Latitude 5495. Add the new entry for that.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1137799
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The compiler is not smart enough to realize that iommu->cmd_buf_tail
can't be modified across memcpy:
41 8b 45 74 mov 0x74(%r13),%eax # iommu->cmd_buf_tail
44 8d 78 10 lea 0x10(%rax),%r15d # += sizeof(*cmd)
41 81 e7 ff 1f 00 00 and $0x1fff,%r15d # %= CMD_BUFFER_SIZE
49 03 45 68 add 0x68(%r13),%rax # target = iommu->cmd_buf + iommu->cmd_buf_tail
45 89 7d 74 mov %r15d,0x74(%r13) # store to iommu->cmd_buf_tail
49 8b 34 24 mov (%r12),%rsi # memcpy
49 8b 7c 24 08 mov 0x8(%r12),%rdi # memcpy
48 89 30 mov %rsi,(%rax) # memcpy
48 89 78 08 mov %rdi,0x8(%rax) # memcpy
49 8b 55 38 mov 0x38(%r13),%rdx # iommu->mmio_base
41 8b 45 74 mov 0x74(%r13),%eax # redundant load of iommu->cmd_buf_tail
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
89 82 08 20 00 00 mov %eax,0x2008(%rdx) # writel
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Joerg Roedel <jroedel@suse.de>
CC: linux-kernel@vger.kernel.org
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
platform_get_irq() will call dev_err() itself on failure,
so there is no need for the driver to also do this.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Pull dma-mapping fix from Christoph Hellwig:
"Fix a regression in the intel-iommu get_required_mask conversion
(Arvind Sankar)"
* tag 'dma-mapping-5.4-2' of git://git.infradead.org/users/hch/dma-mapping:
iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMU
|
|
We must return a mask covering the full physical RAM when bypassing the
IOMMU mapping. Also, in iommu_need_mapping, we need to check using
dma_direct_get_required_mask to ensure that the device's dma_mask can
cover physical RAM before deciding to bypass IOMMU mapping.
Based on an earlier patch from Christoph Hellwig.
Fixes: 249baa547901 ("dma-mapping: provide a better default ->get_required_mask")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
Linus Torvalds
Bjorn Helgaas
Rafael J. Wysocki
Boqun Feng
Nicolas Saenz Julienne
Krzysztof Wilczynski
Christoph Hellwig
Joerg Roedel
Robin Murphy
Deepa Dinamani
Yian Chen
Jean-Philippe Brucker
Yoshihiro Shimoda
Yong Wu
Will Deacon
Vivek Gautam
Rob Clark
Cristiane Naves
Logan Gunthorpe
John Donnelly
Takashi Iwai
Denys Vlasenko
YueHaibing
Arvind Sankar