aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/irqchip/irq-gic-v3-its.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-7/+8
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-11Merge tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds1-1/+2
Pull IOMMU updates from Joerg Roedel: - OF_IOMMU support for the Rockchip iommu driver so that it can use generic DT bindings - rework of locking in the AMD IOMMU interrupt remapping code to make it work better in RT kernels - support for improved iotlb flushing in the AMD IOMMU driver - support for 52-bit physical and virtual addressing in the ARM-SMMU - various other small fixes and cleanups * tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits) iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_t iommu/rockchip: Support sharing IOMMU between masters iommu/rockchip: Add runtime PM support iommu/rockchip: Fix error handling in init iommu/rockchip: Use OF_IOMMU to attach devices automatically iommu/rockchip: Use IOMMU device for dma mapping operations dt-bindings: iommu/rockchip: Add clock property iommu/rockchip: Control clocks needed to access the IOMMU iommu/rockchip: Fix TLB flush of secondary IOMMUs iommu/rockchip: Use iopoll helpers to wait for hardware iommu/rockchip: Fix error handling in attach iommu/rockchip: Request irqs in rk_iommu_probe() iommu/rockchip: Fix error handling in probe iommu/rockchip: Prohibit unbind and remove iommu/amd: Return proper error code in irq_remapping_alloc() iommu/amd: Make amd_iommu_devtable_lock a spin_lock iommu/amd: Drop the lock while allocating new irq remap table iommu/amd: Factor out setting the remap table for a devid iommu/amd: Use `table' instead `irt' as variable name in amd_iommu_update_ga() iommu/amd: Remove the special case from alloc_irq_table() ...
2018-04-04Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-52/+215
Pull irq updates from Thomas Gleixner: "The usual pile of boring changes: - Consolidate tasklet functions to share code instead of duplicating it - The first step for making the low level entry handler management on multi-platform kernels generic - A new sysfs file which allows to retrieve the wakeup state of interrupts. - Ensure that the interrupt thread follows the effective affinity and not the programmed affinity to avoid cross core wakeups. - Two new interrupt controller drivers (Microsemi Ocelot and Qualcomm PDC) - Fix the wakeup path clock handling for Reneasas interrupt chips. - Rework the boot time register reset for ARM GIC-V2/3 - Better suspend/resume support for ARM GIV-V3/ITS - Add missing locking to the ARM GIC set_type() callback - Small fixes for the irq simulator code - SPDX identifiers for the irq core code and removal of boiler plate - Small cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) openrisc: Set CONFIG_MULTI_IRQ_HANDLER arm64: Set CONFIG_MULTI_IRQ_HANDLER genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER irqchip/gic: Take lock when updating irq type irqchip/gic: Update supports_deactivate static key to modern api irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling irqchip: Add a driver for the Microsemi Ocelot controller dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller irqchip/gic-v3: Probe for SCR_EL3 being clear before resetting AP0Rn irqchip/gic-v3: Don't try to reset AP0Rn irqchip/gic-v3: Do not check trigger configuration of partitionned LPIs genirq: Remove license boilerplate/references genirq: Add missing SPDX identifiers genirq/matrix: Cleanup SPDX identifier genirq: Cleanup top of file comments genirq: Pass desc to __irq_free instead of irq number irqchip/gic-v3: Loudly complain about the use of IRQ_TYPE_NONE irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER ...
2018-03-29Merge branches 'x86/amd', 'x86/vt-d', 'arm/rockchip', 'arm/omap', 'arm/mediatek', 'arm/exynos', 'arm/renesas', 'arm/smmu' and 'core' into nextJoerg Roedel1-8/+10
2018-03-23irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enablingShanker Donthineni1-14/+60
Booting with GICR_CTLR.EnableLPI=1 is usually a bad idea, and may result in subtle memory corruption. Detecting this is thus pretty important. On detecting that LPIs are still enabled, we taint the kernel (because we're not sure of anything anymore), and try to disable LPIs. This can fail, as implementations are allowed to implement GICR_CTLR.EnableLPI as a one-way enable, meaning the redistributors cannot be reprogrammed with new tables. Should this happen, we fail probing the redistributor and warn the user that things are pretty dire. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> [maz: reworded changelog, minor comment and message changes] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-14irqchip/gic-v3-its: Add ability to resend MAPC on resumeDerek Basehore1-38/+48
This adds functionality to resend the MAPC command to an ITS node on resume. If the ITS is powered down during suspend and the collections are not backed by memory, the ITS will lose that state. This just sets up the known state for the collections after the ITS is restored. Signed-off-by: Derek Basehore <dbasehore@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-14irqchip/gic-v3-its: Add ability to save/restore ITS stateDerek Basehore1-0/+107
Some platforms power off GIC logic in suspend, so we need to save/restore state. The distributor and redistributor registers need to be handled in firmware code due to access permissions on those registers, but the ITS registers can be restored in the kernel. We limit this to systems where the ITS collections are implemented in HW (as opposed to being backed by memory tables), as they are the only ones that cannot be dealt with by the firmware. Signed-off-by: Derek Basehore <dbasehore@chromium.org> [maz: fixed changelog, dropped DT property, limited to HCC being >0] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-11irqchip/gic-v3-its: Ensure nr_ites >= nr_lpisArd Biesheuvel1-5/+4
When struct its_device instances are created, the nr_ites member will be set to a power of 2 that equals or exceeds the requested number of MSIs passed to the msi_prepare() callback. At the same time, the LPI map is allocated to be some multiple of 32 in size, where the allocated size may be less than the requested size depending on whether a contiguous range of sufficient size is available in the global LPI bitmap. This may result in the situation where the nr_ites < nr_lpis, and since nr_ites is what we program into the hardware when we map the device, the additional LPIs will be non-functional. For bog standard hardware, this does not really matter. However, in cases where ITS device IDs are shared between different PCIe devices, we may end up allocating these additional LPIs without taking into account that they don't actually work. So let's make nr_ites at least 32. This ensures that all allocated LPIs are 'live', and that its_alloc_device_irq() will fail when attempts are made to allocate MSIs beyond what was allocated in the first place. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [maz: updated comment] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-02-16irqchip/gic-v3-its: Fix misplaced __iomem annotationsRobin Murphy1-2/+2
Save 26 lines worth of Sparse complaints by fixing up this minor mishap. The pointee lies in the __iomem space; the pointer does not. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-02-16irqchip/gic-v3: Ignore disabled ITS nodesStephen Boyd1-0/+2
On some platforms there's an ITS available but it's not enabled because reading or writing the registers is denied by the firmware. In fact, reading or writing them will cause the system to reset. We could remove the node from DT in such a case, but it's better to skip nodes that are marked as "disabled" in DT so that we can describe the hardware that exists and use the status property to indicate how the firmware has configured things. Cc: Stuart Yoder <stuyoder@gmail.com> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-02-14ACPI/IORT: Add msi address regions reservation helperShameer Kolothum1-1/+2
On some platforms msi parent address regions have to be excluded from normal IOVA allocation in that they are detected and decoded in a HW specific way by system components and so they cannot be considered normal IOVA address space. Add a helper function that retrieves ITS address regions - the msi parent - through IORT device <-> ITS mappings and reserves it so that these regions will not be translated by IOMMU and will be excluded from IOVA allocations. The function checks for the smmu model number and only applies the msi reservation if the platform requires it. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [For the ITS part] Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-12-29genirq/irqdomain: Rename early argument of irq_domain_activate_irq()Thomas Gleixner1-2/+2
The 'early' argument of irq_domain_activate_irq() is actually used to denote reservation mode. To avoid confusion, rename it before abuse happens. No functional change. Fixes: 72491643469a ("genirq/irqdomain: Update irq_domain_ops.activate() signature") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexandru Chirvasitu <achirvasub@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org
2017-11-13Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-80/+310
Pull irq core updates from Thomas Gleixner: "A rather large update for the interrupt core code and the irq chip drivers: - Add a new bitmap matrix allocator and supporting changes, which is used to replace the x86 vector allocator which comes with separate pull request. This allows to replace the convoluted nested loop allocation function in x86 with a facility which supports the recently added property of managed interrupts proper and allows to switch to a best effort vector reservation scheme, which addresses problems with vector exhaustion. - A large update to the ARM GIC-V3-ITS driver adding support for range selectors. - New interrupt controllers: - Meson and Meson8 GPIO - BCM7271 L2 - Socionext EXIU If you expected that this will stop at some point, I have to disappoint you. There are new ones posted already. Sigh! - STM32 interrupt controller support for new platforms. - A pile of fixes, cleanups and updates to the MIPS GIC driver - The usual small fixes, cleanups and updates all over the place. Most visible one is to move the irq chip drivers Kconfig switches into a separate Kconfig menu" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) genirq: Fix type of shifting literal 1 in __setup_irq() irqdomain: Drop pointless NULL check in virq_debug_show_one genirq/proc: Return proper error code when irq_set_affinity() fails irq/work: Use llist_for_each_entry_safe irqchip: mips-gic: Print warning if inherited GIC base is used irqchip/mips-gic: Add pr_fmt and reword pr_* messages irqchip/stm32: Move the wakeup on interrupt mask irqchip/stm32: Fix initial values irqchip/stm32: Add stm32h7 support dt-bindings/interrupt-controllers: Add compatible string for stm32h7 irqchip/stm32: Add multi-bank management irqchip/stm32: Select GENERIC_IRQ_CHIP irqchip/exiu: Add support for Socionext Synquacer EXIU controller dt-bindings: Add description of Socionext EXIU interrupt controller irqchip/gic-v3-its: Fix VPE activate callback return value irqchip: mips-gic: Make IPI bitmaps static irqchip: mips-gic: Share register writes in gic_set_type() irqchip: mips-gic: Remove gic_vpes variable irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs irqchip: mips-gic: Configure EIC when CPUs come online ...
2017-11-07irqchip/gic-v3-its: Fix VPE activate callback return valueMarc Zyngier1-1/+1
its_vpe_irq_domain_activate should always return 0. Really. There is not a single case why it wouldn't. So this "return true;" is really a copy/paste issue that got revealed now that we actually check the return value of the activate method. Brown paper bag day. Fixes: 2247e1bf7063 ("irqchip/gic-v3-its: Limit scope of VPE mapping to be per ITS") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02irqchip/gic-v3-its: Setup VLPI properties at map timeMarc Zyngier1-2/+16
So far, we require the hypervisor to update the VLPI properties once the the VLPI mapping has been established. While this makes it easy for the ITS driver, it creates a window where an incoming interrupt can be delivered with an unknown set of properties. Not very nice. Instead, let's add a "properties" field to the mapping structure, and use that to configure the VLPI before it actually gets mapped. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3-its: Update effective affinity on VPE mappingMarc Zyngier1-0/+6
When setting the affinity of a VPE (either because we map or move it), make sure the effective affinity is correctly reported back to the core kernel. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3-its: Only send VINVALL to a single ITSMarc Zyngier1-0/+5
Sending VINVALL to all ITSs is completely pointless, as all we're trying to achieve is to tell the redistributor that the property table for this VPE should be invalidated. Let's issue the command on the first valid ITS and be done with it. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3-its: Limit scope of VPE mapping to be per ITSMarc Zyngier1-0/+75
So far, we map all VPEs on all ITSs. While this is not wrong, this is quite a big hammer, as moving a VPE around requires all ITSs to be synchronized. Needles to say, this is an expensive proposition. Instead, let's switch to a mode where we issue VMAPP commands only on ITSs that are actually involved in reporting interrupts to the given VM. For that purpose, we refcount the number of interrupts are are mapped for this VM on each ITS, performing the map/unmap operations as required. It then allows us to use this refcount to only issue VMOVP to the ITSs that need to know about this VM. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3-its: Make its_send_vmapp operate on a single ITSMarc Zyngier1-11/+12
Currently, its_send_vmapp operates on all ITSs. As we're about to try and limit the amount of commands we send to ITSs that are not involved in dealing with a given VM, let's redefine that primitive so that it takes a target ITS as a parameter. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3-its: Make its_send_vinvall operate on a single ITSMarc Zyngier1-10/+24
Currently, its_send_vinvall operates on all ITSs. As we're about to try and limit the amount of commands we send to ITSs that are not involved in dealing with a given VM, let's redefine that primitive so that it takes a target ITS as a parameter. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3-its: Make GICv4_ITS_LIST_MAX globally availableMarc Zyngier1-8/+2
As we're about to make use of the maximum number of ITSs in a GICv4 system, let's make this value global (and rename it to GICv4_ITS_LIST_MAX). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3-its: Track per-ITS list numberMarc Zyngier1-0/+3
At boot time, we enumerate all the GICv4-capable ITSs, and build a mask of the available ITSs. Take this opportunity to store the ITS number in the its_node structure so that we can use it at a later time. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3-its: Workaround HiSilicon Hip07 redistributor addressingMarc Zyngier1-2/+28
The ITSes on the Hip07 (as present in the Huawei D05) are broken when it comes to addressing the redistributors, and need to be explicitely told to address the VLPI page instead of the redistributor base address. So let's add yet another quirk, fixing up the target address in the command stream. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3-its: Pass its_node pointer to each command builderMarc Zyngier1-20/+38
In order to be able to issue command variants depending on how broken an ITS is, let's pass the its pointer to all command building primitives. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3-its: Add post-mortem info on command timeoutMarc Zyngier1-6/+10
If the ITS stops processing commands, we're pretty much toasted as we cannot update the configuration anymore (and we're not even sure that the ITS still translates interrups). If that happens, let's dump some basic information about the state of affairs before moving on. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3: Add workaround for Synquacer pre-ITSArd Biesheuvel1-2/+70
The Socionext Synquacer SoC's implementation of GICv3 has a so-called 'pre-ITS', which maps 32-bit writes targeted at a separate window of size '4 << device_id_bits' onto writes to GITS_TRANSLATER with device ID taken from bits [device_id_bits + 1:2] of the window offset. Writes that target GITS_TRANSLATER directly are reported as originating from device ID #0. So add a workaround for this. Given that this breaks isolation, clear the IRQ_DOMAIN_FLAG_MSI_REMAP flag as well. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic: Make quirks matching conditional on init return valueArd Biesheuvel1-3/+9
As it turns out, the IIDR is not sufficient to distinguish between GICv3 implementations when it comes to enabling quirks. So update the prototype of the init() hook to return a bool, and interpret a 'false' return value as no match, in which case the 'enabling workaround' log message should not be printed. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3: Probe device ID space before quirks handlingArd Biesheuvel1-12/+6
Before adding another SoC whose device ID space deviates from the value presented in the GIC ID registers, let's slightly refactor the code so that the ID registers are probed before that quirks handling executes. This allows us to move the device ID override into the quirk handler itself. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-13irqchip/gic-v3-its: Add missing changes to support 52bit physical addressShanker Donthineni1-5/+21
The current ITS driver works fine as long as normal memory and GICR regions are located within the lower 48bit (>=0 && <2^48) physical address space. Some of the registers GICR_PEND/PROP, GICR_VPEND/VPROP and GITS_CBASER are handled properly but not all when configuring the hardware with 52bit physical address. This patch does the following changes to support 52bit PA. -Handle 52bit PA in GITS_BASERn. -Fix ITT_addr width to 52bits, bits[51:8]. -Fix RDbase width to 52bits, bits[51:16]. -Fix VPT_addr width to 52bits, bits[51:16]. Definition of the GITS_BASERn register when ITS PageSize is 64KB: -Bits[47:16] of the register provide bits[47:16] of the table PA. -Bits[15:12] of the register provide bits[51:48] of the table PA. -Bits[15:00] of the base physical address are 0. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-13irqchip/gic-v3-its: Fix the incorrect parsing of VCPU table sizeShanker Donthineni1-4/+11
The VCPU table consists of vPE entries, and its size provides the number of VPEs supported by GICv4 hardware. Unfortunately the maximum size of the VPE table is not discoverable like Device table. All VLPI commands limits the number of bits to 16 to hold VPEID, which is index into VCPU table. Don't apply DEVID bits for VCPU table instead assume maximum bits to 16. ITS log messages on QDF2400 without fix: allocated 524288 Devices (indirect, esz 8, psz 64K, shr 1) allocated 8192 Interrupt Collections (flat, esz 8, psz 64K, shr 1) Virtual CPUs Table too large, reduce ids 32->26 Virtual CPUs too large, reduce ITS pages 8192->256 allocated 2097152 Virtual CPUs (flat, esz 8, psz 64K, shr 1) ITS log messages on QDF2400 with fix: allocated 524288 Devices (indirect, esz 8, psz 64K, shr 1) allocated 8192 Interrupt Collections (flat, esz 8, psz 64K, shr 1) allocated 65536 Virtual CPUs (flat, esz 8, psz 64K, shr 1) Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-13irqchip/gic-v3-its: Fix the incorrect BUG_ON in its_init_vpe_domain()Shanker Donthineni1-1/+1
The driver probe path hits 'BUG_ON(entries != vpe_proxy.dev->nr_ites)' on systems where it has VLPI capability, doesn't support direct LPI feature and boot with a single CPU. Relax the BUG_ON() condition to fix the issue. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-09-25genirq/irqdomain: Update irq_domain_ops.activate() signatureThomas Gleixner1-4/+6
The irq_domain_ops.activate() callback has no return value and no way to tell the function that the activation is early. The upcoming changes to support a reservation scheme which allows to assign interrupt vectors on x86 only when the interrupt is actually requested requires: - A return value, so activation can fail at request_irq() time - Information that the activate invocation is early, i.e. before request_irq(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.848490816@linutronix.de
2017-09-04Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-116/+1380
Pull irq updates from Thomas Gleixner: "The interrupt subsystem delivers this time: - Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support - Initial GIC-V4 support - Consolidation of the FSL MSI support - Utilize the effective affinity interface in various ARM irqchip drivers - Yet another interrupt chip driver (UniPhier AIDET) - Bulk conversion of the irq chip driver to use %pOF - The usual small fixes and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) irqchip/ls-scfg-msi: Add MSI affinity support irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support irqchip/ls-scfg-msi: Add LS1046a MSI support arm64: dts: ls1046a: Add MSI dts node arm64: dts: ls1043a: Share all MSIs arm: dts: ls1021a: Share all MSIs arm64: dts: ls1043a: Fix typo of MSI compatible string arm: dts: ls1021a: Fix typo of MSI compatible string irqchip/ls-scfg-msi: Fix typo of MSI compatible strings irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask irqchip/mmp: Make mmp_intc_conf const irqchip/gic: Make irq_chip const irqchip/gic-v3: Advertise GICv4 support to KVM irqchip/gic-v4: Enable low-level GICv4 operations irqchip/gic-v4: Add some basic documentation irqchip/gic-v4: Add VLPI configuration interface irqchip/gic-v4: Add VPE command interface irqchip/gic-v4: Add per-VM VPE domain creation irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared ...
2017-08-31Merge tag 'irqchip-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/coreThomas Gleixner1-115/+1374
Pull irqchip updates for 4.14 from Marc Zyngier: - irqchip-specific part of the monster GICv4 series - new UniPhier AIDET irqchip driver - new variants of some Freescale MSI widget - blanket removal of of_node->full_name in printk - random collection of fixes
2017-08-31irqchip/gic-v4: Enable low-level GICv4 operationsMarc Zyngier1-1/+2
Get the show on the road... Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Set implementation defined bit to enable VLPIsMarc Zyngier1-2/+5
A long time ago, GITS_CTLR[1] used to be called GITC_CTLR.EnableVLPI. It has been subsequently deprecated and is now an "Implementation Defined" bit that may ot may not be set for GICv4. Brilliant. And the current crop of the FastModel requires that bit for VLPIs to be enabled. Oh well... Let's set it and find out what breaks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Allow doorbell interrupts to be injected/clearedMarc Zyngier1-0/+31
While the doorbell interrupts are usually driven by the HW itself, having a way to trigger them independently has proved to be a really useful debug feature. As it is actually very little code, let's add it to the VPE irqchip operations. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Move pending doorbell after VMOVPMarc Zyngier1-2/+32
After moving a VPE from a redistributor to another, we're still left with a potential pending doorbell interrupt on the old redistributor. That interrupt should be moved to the new one to be either cleared or take, depending on what the hypervisor wishes to do. So let's move it right after having execited VMOVP. This doesn't add much cost in the !DirectLPI case (we trade a DISCARD for a MOVI), and the cost of the DIRECTLPI case should be minimal (two extra MMIO accesses). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Add device proxy for VPE management if !DirectLpiMarc Zyngier1-6/+145
When we don't have the DirectLPI feature, we must work around the architecture shortcomings to be able to perform the required maintenance (interrupt masking, clearing and injection). For this, we create a fake device whose sole purpose is to provide a way to issue commands as if we were dealing with LPIs coming from that device (while they actually originate from the ITS). This fake device doesn't have LPIs allocated to it, but instead uses the VPE LPIs. Of course, this could be a real bottleneck, and a naive implementation would require 6 commands to issue an invalidation. Instead, let's allocate at least one event per physical CPU (rounded up to the next power of 2), and opportunistically map the VPE doorbell to an event. This doorbell will be mapped until we roll over and need to reallocate this slot. This ensures that most of the time, we only need 2 commands to issue an INV, INT or CLEAR, making the performance a lot better, given that we always issue a CLEAR on entry, and an INV on each side of a trapped WFI. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Make LPI allocation optional on device creationMarc Zyngier1-7/+14
The normal course of action when allocating the ITS' view of a device is to allocate the corresponding LPIs. But we're about to introduce devices that borrow their interrupts from some other entities. So let's make the allocation optional. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Add VPE interrupt maskingMarc Zyngier1-0/+33
When masking/unmasking a doorbell interrupt, it is necessary to issue an invalidation to the corresponding redistributor. We use the DirectLPI feature by writting directly to the corresponding redistributor. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Add VPE affinity changesMarc Zyngier1-0/+96
When we're about to run a vcpu, it is crucial that the redistributor associated with the physical CPU is being told about the new residency. This is abstracted by hijacking the irq_set_affinity method for the doorbell interrupt associated with the VPE. It is expected that the hypervisor will call this method before scheduling the VPE. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Add VPE invalidation hookMarc Zyngier1-0/+4
When a guest issues a INVALL command targetting a collection, it must be translated into a VINVALL for the VPE that has this collection. This patch implements a hook that offers this functionallity to the hypervisor. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Add VPE schedulingMarc Zyngier1-0/+85
When a VPE is scheduled to run, the corresponding redistributor must be told so, by setting VPROPBASER to the VM's property table, and VPENDBASER to the vcpu's pending table. When scheduled out, we preserve the IDAI and PendingLast bits. The latter is specially important, as it tells the hypervisor that there are pending interrupts for this vcpu. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Add VPE irq domain [de]activationMarc Zyngier1-0/+102
On activation, a VPE is mapped using the VMAPP command, followed by a VINVALL for a good measure. On deactivation, the VPE is simply unmapped. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Add VPE irq domain allocation/teardownMarc Zyngier1-0/+169
When creating a VM, the low level GICv4 code is responsible for: - allocating each VPE a unique VPEID - allocating a doorbell interrupt for each VPE - allocating the pending tables for each VPE - allocating the property table for the VM This of course has to be reversed when the VM is brought down. All of this is wired into the irq domain alloc/free methods. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Add VPE domain infrastructureMarc Zyngier1-1/+30
Add the basic GICv4 VPE (vcpu in GICv4 parlance) infrastructure (irqchip, irq domain) that is going to be populated in the following patches. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Add VLPI configuration handlingMarc Zyngier1-5/+70
When a VLPI is reconfigured (enabled, disabled, change in priority), the full configuration byte must be written, and the caches invalidated. Also, when using the irq_mask/irq_unmask methods, it is necessary to disable the doorbell for that particular interrupt (by mapping it to 1023) on top of clearing the Enable bit. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31irqchip/gic-v3-its: Add VLPI map/unmap operationsMarc Zyngier1-3/+247
In order to let a VLPI being injected into a guest, the VLPI must be mapped using the VMAPTI command. When moved to a different vcpu, it must be moved with the VMOVI command. These commands are issued via the irq_set_vcpu_affinity method, making sure we unmap the corresponding host LPI first. The reverse is also done when the VLPI is unmapped from the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.