aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/irqchip/irq-gic-v3-its.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-06-23Merge tag 'irqchip-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/coreThomas Gleixner1-19/+92
Pull irqchip updates for v4.13 from Marc Zyngier - support for the new Marvell wire-to-MSI bridge - support for the Aspeed I2C irqchip - Armada XP370 per-cpu interrupt fixes - GICv3 ITS ACPI NUMA support - sunxi-nmi cleanup and updates for new platform support - various GICv3 ITS cleanups and fixes - some constifying in various places
2017-06-23irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTIDShanker Donthineni1-14/+10
The current ITS driver is assuming every ITS hardware implementation supports minimum of 16bit INTID. But this is not true, as per GICv3 specification, INTID field is IMPLEMENTATION DEFINED in the range of 14-24 bits. We might see an unpredictable system behavior on systems where hardware support less than 16bits and software tries to use 64K LPI interrupts. On Qualcomm Datacenter Technologies QDF2400 platform, boot log shows confusing information about number of LPI chunks as shown below. The QDF2400 ITS hardware supports 24bit INTID. This patch allocates the memory resources for PEND/PROP tables based on discoverable value which is specified in GITS_TYPER.IDbits. Also it fixes the log message that reflects the correct number of LPI chunks were allocated. ITS@0xff7efe0000: allocated 524288 Devices @3c0400000 (indirect, esz 8, psz 64K, shr 1) ITS@0xff7efe0000: allocated 8192 Interrupt Collections @3c0130000 (flat, esz 8, psz 64K, shr 1) ITS@0xff7efe0000: allocated 8192 Virtual CPUs @3c0140000 (flat, esz 8, psz 64K, shr 1) ITS: Allocated 524032 chunks for LPIs PCI/MSI: ITS@0xff7efe0000 domain created Platform MSI: ITS@0xff7efe0000 domain created Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-23irqchip/gic-v3-its: Add ACPI NUMA node mappingGanapatrao Kulkarni1-1/+75
Add code to parse SRAT ITS Affinity sub table as defined in ACPI 6.2. Later in per device probe, ITS devices are mapped to numa node using ITS Id to proximity domain mapping. [maz: fix dependency on ACPICA, fixed structure name, minor cleanups] Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-23irqchip/gic-v3-its: Make of_device_ids constArvind Yadav1-1/+1
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-22irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded accessMarc Zyngier1-1/+1
Now that we have irq_domain_update_bus_token(), switch everyone over to it. The debugfs code thanks you for your continued support. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-22irqchip/gicv3-its: Skip irq affinity setting when target cpu is the same as current settingMaJun1-3/+6
Just skip the irq affinity setting when the target cpu is the same as current setting. This is a small optimization for irq affinity setting logic. Signed-off-by: MaJun <majun258@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07irqchip/gic-v3-its: Keep the include header files in alphabetic orderHanjun Guo1-1/+1
Rearrange header file includes in alphabetic order. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [lorenzo.pieralisi@arm.com: fixed commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Ming Lei <ming.lei@canonical.com> Tested-by: Wei Xu <xuwei5@hisilicon.com> Tested-by: Sinan Kaya <okaya@codeaurora.org> Cc: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-07irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065Shanker Donthineni1-0/+16
On Qualcomm Datacenter Technologies QDF2400 SoCs, the ITS hardware implementation uses 16Bytes for Interrupt Translation Entry (ITE), but reports an incorrect value of 8Bytes in GITS_TYPER.ITTE_size. It might cause kernel memory corruption depending on the number of MSI(x) that are configured and the amount of memory that has been allocated for ITEs in its_create_device(). This patch fixes the potential memory corruption by setting the correct ITE size to 16Bytes. Cc: stable@vger.kernel.org Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-20Merge tag 'iommu-updates-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds1-0/+1
Pull IOMMU UPDATES from Joerg Roedel: - KVM PCIe/MSI passthrough support on ARM/ARM64 - introduction of a core representation for individual hardware iommus - support for IOMMU privileged mappings as supported by some ARM IOMMUS - 16-bit SID support for ARM-SMMUv2 - stream table optimization for ARM-SMMUv3 - various fixes and other small improvements * tag 'iommu-updates-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (61 commits) vfio/type1: Fix error return code in vfio_iommu_type1_attach_group() iommu: Remove iommu_register_instance interface iommu/exynos: Make use of iommu_device_register interface iommu/mediatek: Make use of iommu_device_register interface iommu/msm: Make use of iommu_device_register interface iommu/arm-smmu: Make use of the iommu_register interface iommu: Add iommu_device_set_fwnode() interface iommu: Make iommu_device_link/unlink take a struct iommu_device iommu: Add sysfs bindings for struct iommu_device iommu: Introduce new 'struct iommu_device' iommu: Rename struct iommu_device iommu: Rename iommu_get_instance() iommu: Fix static checker warning in iommu_insert_device_resv_regions iommu: Avoid unnecessary assignment of dev->iommu_fwspec iommu/mediatek: Remove bogus 'select' statements iommu/dma: Remove bogus dma_supported() implementation iommu/ipmmu-vmsa: Restrict IOMMU Domain Geometry to 32-bit address space iommu/vt-d: Don't over-free page table directories iommu/vt-d: Tylersburg isoch identity map check is done too late. iommu/vt-d: Fix some macros that are incorrectly specified in intel-iommu ...
2017-02-08irqchip/gic-v3-its: Zero command on allocationMarc Zyngier1-0/+6
When reusing commands from the ring buffer, it would be better to zero them out, even if the ITS should ignore the unused fields. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08irqchip/gic-v3-its: Fix command buffer allocationRobert Richter1-2/+3
The its command buffer must be page aligned, but kzalloc() is not guaranteed to be (though it is mostly when allocating 64k). Use __get_free_pages() as this is used for other buffers as well. Signed-off-by: Robert Richter <rrichter@cavium.com> [Marc: fixed the error path] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08irqchip/gic-v3-its: Rename MAPVI to MAPTIMarc Zyngier1-14/+14
Back in the days when the GICv3/v4 architecture was drafted, the command to an event to an LPI number was called MAPVI. Later on, and to avoid confusion with the GICv4 command VMAPI, it was renamed MAPTI. We've carried the old name for a long time, but it gets in the way of people reading the code in the light of the public architecture specification. Just repaint all the references and kill the old definition. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08irqchip/gic-v3-its: Drop deprecated GITS_BASER_TYPE_CPUMarc Zyngier1-1/+1
During the development of the GICv3/v4 architecture, it was envisaged to have a CPU table, though the use for it was never completely clear (the collection table serves that role pretty well). It ended being dropped before the specification was published, though it lived on in the driver. In order to avoid people scratching their head too much, let's do the same in the kernel. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08irqchip/gic-v3-its: Refactor command encodingMarc Zyngier1-18/+16
The way we encode the various ITS command fields is both tedious and error prone. Let's introduce a helper function that performs the encoding, and convert the existing encoders to use that helper. It also has the advantage of expressing the encoding in a way that matches the architecture specification. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08irqchip/gic-v3-its: Enable cacheable attribute Read-allocate hintsShanker Donthineni1-5/+5
Read-allocation hints are not enabled for both the GIC-ITS and GICR tables. This forces the hardware to always read the table contents from an external memory (DDR) which is slow compared to cache memory. Most of the tables are often read by hardware. So, it's better to enable Read-allocate hints in addition to Write-allocate hints in order to improve the GICR_PEND, GICR_PROP, Collection, Device, and vCPU tables lookup time. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-23irqchip/gicv3-its: Sets IRQ_DOMAIN_FLAG_MSI_REMAPEric Auger1-0/+1
The GICv3 ITS is MSI remapping capable. Let's advertise this property so that VFIO passthrough can assess IRQ safety. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com> Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-11-29irqchip/gic-v3-its: Specialise readq and writeq accessesVladimir Murzin1-12/+12
readq and writeq type of assessors are not supported in AArch32, so we need to specialise them and glue later with series of 32-bit accesses on AArch32 side. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-29irqchip/gic-v3-its: Specialise flush_dcache operationVladimir Murzin1-9/+8
It'd be better to switch to CMA... but before that done redirect flush_dcache operation, so 32-bit implementation could be wired latter. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-29irqchip/gic-v3-its: Narrow down Entry Size when used as a dividerVladimir Murzin1-3/+3
GITS_BASER<n>'s Entry Size is much smaller than 64-bit, but when it used as a divider it forces compiler to generate __aeabi_uldivmod if build in 32-bit mode. So, casting it to int (like it is done in other places) where used as a divider would give a hint to compiler that 32-bit division can be used. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-29irqchip/gic-v3-its: Change unsigned types for AArch32 compatibilityVladimir Murzin1-14/+14
Make sure that constants which are supposed to be applied on 64-bit data is actually unsigned long long, so they won't be truncated when used in 32-bit mode. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-10-17irqchip/gic-v3-its: Fix 64bit GIC{R,ITS}_TYPER accessesMarc Zyngier1-5/+5
The GICv3 architecture specification mentions that a 64bit register can be accessed using two 32bit accesses. What it doesn't mention is that this is only guaranteed on a system that implements AArch32, and a pure AArch64 system is allowed not to support this. This causes issues with the GICR_TYPER and GITS_TYPER registers, which are both RO 64bit registers. In order to solve this, this patch switches the TYPER accesses to the gic_read_typer macro already used in other parts of the driver. This makes sure that we always use a 64bit access on 64bit systems, and two 32bit accesses on 32bit system. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-10-11Merge tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds1-0/+3
Pull IOMMU updates from Joerg Roedel: - support for interrupt virtualization in the AMD IOMMU driver. These patches were shared with the KVM tree and are already merged through that tree. - generic DT-binding support for the ARM-SMMU driver. With this the driver now makes use of the generic DMA-API code. This also required some changes outside of the IOMMU code, but these are acked by the respective maintainers. - more cleanups and fixes all over the place. * tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (40 commits) iommu/amd: No need to wait iommu completion if no dte irq entry change iommu/amd: Free domain id when free a domain of struct dma_ops_domain iommu/amd: Use standard bitmap operation to set bitmap iommu/amd: Clean up the cmpxchg64 invocation iommu/io-pgtable-arm: Check for v7s-incapable systems iommu/dma: Avoid PCI host bridge windows iommu/dma: Add support for mapping MSIs iommu/arm-smmu: Set domain geometry iommu/arm-smmu: Wire up generic configuration support Docs: dt: document ARM SMMU generic binding usage iommu/arm-smmu: Convert to iommu_fwspec iommu/arm-smmu: Intelligent SMR allocation iommu/arm-smmu: Add a stream map entry iterator iommu/arm-smmu: Streamline SMMU data lookups iommu/arm-smmu: Refactor mmu-masters handling iommu/arm-smmu: Keep track of S2CR state iommu/arm-smmu: Consolidate stream map entry state iommu/arm-smmu: Handle stream IDs more dynamically iommu/arm-smmu: Set PRIVCFG in stage 1 STEs iommu/arm-smmu: Support non-PCI devices with SMMUv3 ...
2016-09-16iommu/dma: Add support for mapping MSIsRobin Murphy1-0/+3
When an MSI doorbell is located downstream of an IOMMU, attaching devices to a DMA ops domain and switching on translation leads to a rude shock when their attempt to write to the physical address returned by the irqchip driver faults (or worse, writes into some already-mapped buffer) and no interrupt is forthcoming. Address this by adding a hook for relevant irqchip drivers to call from their compose_msi_msg() callback, to swizzle the physical address with an appropriatly-mapped IOVA for any device attached to one of our DMA ops domains. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-12irqchip/gicv3-its: Probe ITS in the ACPI wayTomasz Nowicki1-1/+60
ITS is prepared for being initialized different than DT, therefore we can initialize it in ACPI way. We collect register base address from MADT table and pass mandatory info to firmware-agnostic ITS init call. Use here IORT lib to register ITS domain which then can be found and used on to build another PCI MSI domain in hierarchical stack domain. NOTE: Waiting for proper ITS and NUMA node relation description in IORT table, we pass around NUMA_NO_NODE to the its_probe_one init call. This means that Cavium ThunderX erratum 23144 (pass1.1 only) is not supported for ACPI boot method yet. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPITomasz Nowicki1-27/+38
In order to add ACPI support we need to isolate ACPI&DT common code and move DT logic to corresponding functions. To achieve this we are using firmware agnostic handle which can be unpacked to either DT or ACPI node. No functional changes other than a very minor one: 1. Terminate its_init call with -ENODEV for non-DT case which allows to remove hack from its-gic-v3.c. 2. Fix ITS base register address type (from 'unsigned long' to 'phys_addr_t'), as a bonus we get nice string formatting. 3. Since there is only one of ITS parent domain convert it to static global variable and drop the parameter from its_probe_one. Users can refer to it in more convenient way then. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12irqchip/gicv3-its: Cleanup for ITS domain initializationTomasz Nowicki1-23/+34
There is no point to initialize ITS without having msi-controller property in corresponding DT node. However, its_probe is checking msi-controller presence at the end, so we can save our time and do that check prior to its_probe call. Also, for the code clarity purpose, we put domain initialization to separate function. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-08-19irqchip/gicv3-its: Disable the ITS before initializing itDavid Daney1-1/+6
When starting a kexec/kdump kernel, the GIC ITS will already have been enabled. According to the ARM Generic Interrupt Controller Architecture Specification (GIC architecture Version 3.0 and version 4.0), writing to GITS_BASER<n> or GITS_CBASER is "UNPREDICTABLE" when the ITS is enabled. On Cavium Thunder systems, this prevents the ITS from being initializing in the kexec/kdump kernel, resulting in failure to register/enable interrupts for all devices. The fix is to disable the ITS if it is not already in the disabled state. This allows the ITS to be properly initialized and then re-enabled in the kexec/kdump kernel. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-13irqchip/gicv3-its: Implement two-level(indirect) device table supportShanker Donthineni1-17/+90
Since device IDs are extremely sparse, the single, a.k.a flat table is not sufficient for the following two reasons. 1) According to ARM-GIC spec, ITS hw can access maximum of 256(pages)* 64K(pageszie) bytes. In the best case, it supports upto DEVid=21 sparse with minimum device table entry size 8bytes. 2) The maximum memory size that is possible without memblock depends on MAX_ORDER. 4MB on 4K page size kernel with default MAX_ORDER, so it supports DEVid range 19bits. The two-level device table feature brings us two advantages, the first is a very high possibility of supporting upto 32bit sparse, and the second one is the best utilization of memory allocation. The feature is enabled automatically during driver probe if the memory requirement is more than 2*ITS-pages and the hardware is capable of two-level table walk. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-13irqchip/gicv3-its: Remove an unused argument 'node_name'Shanker Donthineni1-2/+2
No references to argument 'node_name' after modifying pr_xxx() messages to include ITS base address instead of 'node_name'. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-13irqchip/gicv3-its: Split its_alloc_tables() into two functionsShanker Donthineni1-116/+126
The function is getting out of control, it has too many goto statements and would be too complicated for adding a feature two-level device table. So, it is time for us to cleanup and move some of the logic to a separate function without affecting the existing functionality. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-13irqchip/gicv3-its: Add a new function for parsing device table BASERnShanker Donthineni1-23/+26
Only the device table BASERn needs to be handled differently as compared to all other tables. So, adding a separate function for easy code maintenance and improved code readability. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-13irqchip/gicv3-its: Introduce two helper functions for accessing BASERnShanker Donthineni1-4/+20
This patch adds the two handy helper functions for reading and writing ITS BASERn register. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> [Marc: Folded its_write_baser_cache into its_write_baser] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-02irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144Ganapatrao Kulkarni1-2/+47
The erratum fixes the hang of ITS SYNC command by avoiding inter node io and collections/cpu mapping on thunderx dual-socket platform. This fix is only applicable for Cavium's ThunderX dual-socket platform. Reviewed-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gicv3-its: Don't allow devices whose ID is outside rangeShanker Donthineni1-4/+38
We are not checking whether the requested device identifier fits into the device table memory or not. The function its_create_device() assumes that enough memory has been allocated for whole DevID space (reported by ITS_TYPER.Devbits) during the ITS probe() and continues to initialize ITS hardware. This assumption is not perfect, sometimes we reduce memory size either because of its size crossing MAX_ORDER-1 or BASERn max size limit. The MAPD command fails if 'Device ID' is outside of device table range. Add a simple validation check to avoid MAPD failures since we are not handling ITS command errors. This change also helps to return an error -ENOMEM instead of success to caller. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-09irqchip/gic-v3-its: Mark its_init() and its children as __initTomasz Nowicki1-3/+4
gicv3_init_bases() is the only caller for its_init(), also it is a __init function, so mark its_init() as __init too, then recursively mark the functions called as __init. This will help to introduce ITS initialization using ACPI tables as we will use acpi_table_parse_entries family functions there which belong to __init section as well. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-09irqchip/gic-v3: Remove gic_root_node variable from the ITS codeHanjun Guo1-3/+0
The gic_root_node variable defined in ITS driver is not actually used, so just remove it. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-17irqchip/gicv3-its: Avoid cache flush beyond ITS_BASERn memory sizeShanker Donthineni1-5/+6
Function its_alloc_tables() maintains two local variables, "order" and and "alloc_size", to hold memory size that has been allocated to ITS_BASEn. We don't always refresh the variable alloc_size whenever value of the variable order changes, causing the following two problems. - Cache flush operation with size more than required. - Information reported by pr_info is not correct. Use a helper macro that converts page order to size in bytes instead of variable "alloc_size" to fix both the problems. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-11irqchip/gic-v3-its: Fix double ICC_EOIR write for LPI in EOImode==1Ashok Kumar1-6/+1
When the GIC is using EOImode==1, the EOI is done immediately, leaving the deactivation to be performed when the EOI was previously done. Unfortunately, the ITS is not aware of the EOImode at all, and blindly EOIs the interrupt again. On most systems, this is ignored (despite being a programming error), but some others do raise a SError exception as there is no priority drop to perform for this interrupt. The fix is to stop trying to be clever, and always call into the underlying GIC to perform the right access, irrespective of the more we're in. [Marc: Reworked commit message] Fixes: 0b996fd35957a ("irqchip/GICv3: Convert to EOImode == 1") Cc: stable@vger.kernel.org Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ashok Kumar <ashoks@broadcom.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-04irqchip/gicv3-its: Fix memory leak in its_free_tables()Shanker Donthineni1-6/+11
The current ITS driver has a memory leak in its_free_tables(). It happens on tear down path of the driver when its_probe() call fails. its_free_tables() should free the exact number of pages that have been allocated, not just a single page as current code does. This patch records the memory size for each ITS_BASERn at the time of page allocation and uses the same size information when freeing pages to fix the issue. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Vikram Sethi <vikrams@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1454379584-21772-1-git-send-email-shankerd@codeaurora.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-26irqchip/gic-v3-its: Recompute the number of pages on page size changeMarc Zyngier1-2/+6
When the programming of a GITS_BASERn register fails because of an unsupported ITS page size, we retry it with a smaller page size. Unfortunately, we don't recompute the number of allocated ITS pages, indicating the wrong value computed in the original allocation. A convenient fix is to free the pages we allocated, update the page size, and restart the allocation. This will ensure that we always allocate the right amount in the case of a device table, specially if we have to reduce the allocation order to stay within the boundaries of the ITS maximum allocation. Reported-and-tested-by: Ma Jun <majun258@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1453818255-1289-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqchip: Convert all alloc/xlate users from of_node to fwnodeMarc Zyngier1-8/+12
Since we now have a generic data structure to express an interrupt specifier, convert all hierarchical irqchips that are OF based to use a fwnode_handle as part of their alloc and xlate (which becomes translate) callbacks. As most of these drivers have dependencies (they exchange IRQ specifiers), change them all in a single, massive patch... Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-6-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13irqdomain: Use irq_domain_get_of_node() instead of direct field accessMarc Zyngier1-1/+1
The struct irq_domain contains a "struct device_node *" field (of_node) that is almost the only link between the irqdomain and the device tree infrastructure. In order to prepare for the removal of that field, convert all users to use irq_domain_get_of_node() instead. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-and-tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Graeme Gregory <graeme@xora.org.uk> Cc: Jake Oshins <jakeo@microsoft.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1444737105-31573-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13Merge branch 'linus' into irq/coreThomas Gleixner1-0/+3
Bring in upstream updates for patches which depend on them
2015-10-02irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlinedMarc Zyngier1-0/+3
More agressive inlining in recent versions of GCC have uncovered a new set of warnings: drivers/irqchip/irq-gic-v3-its.c: In function its_msi_prepare: drivers/irqchip/irq-gic-v3-its.c:1148:26: warning: lpi_base may be used uninitialized in this function [-Wmaybe-uninitialized] dev->event_map.lpi_base = lpi_base; ^ drivers/irqchip/irq-gic-v3-its.c:1116:6: note: lpi_base was declared here int lpi_base; ^ drivers/irqchip/irq-gic-v3-its.c:1149:25: warning: nr_lpis may be used uninitialized in this function [-Wmaybe-uninitialized] dev->event_map.nr_lpis = nr_lpis; ^ drivers/irqchip/irq-gic-v3-its.c:1117:6: note: nr_lpis was declared here int nr_lpis; ^ The warning is fairly benign (there is no code path that could actually use uninitialized variables), but let's silence it anyway by zeroing the variables on the error path. Reported-by: Alex Shi <alex.shi@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: David Daney <ddaney.cavm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1443800646-8074-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-29irqchip/gicv3-its: Workaround for Cavium ThunderX errata 22375, 24313Robert Richter1-4/+33
This implements two gicv3-its errata workarounds for ThunderX. Both with small impact affecting only ITS table allocation. erratum 22375: only alloc 8MB table size erratum 24313: ignore memory access type The fixes are in ITS initialization and basically ignore memory access type and table size provided by the TYPER and BASER registers. Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Reviewed-by: Marc Zygnier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Tirumalesh Chalamarla <tchalamarla@cavium.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1442869119-1814-6-git-send-email-rric@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-29irqchip/gicv3-its: Add HW revision detection and configurationRobert Richter1-0/+16
Some GIC revisions require an individual configuration to esp. add workarounds for HW bugs. This patch implements generic code to parse the hw revision provided by an IIDR register value and runs specific code if hw matches. A function is added that reads the IIDR registers for ITS (GITS_IIDR) and then goes through a list of init functions to be called for specific versions. Same could be done for GICV3 (GICD_IIDR), but there are no users yet for it. The patch is needed to implement workarounds for HW errata in Cavium's ThunderX GICV3 ITS. Signed-off-by: Robert Richter <rrichter@cavium.com> Reviewed-by: Marc Zygnier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Tirumalesh Chalamarla <tchalamarla@cavium.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1442869119-1814-5-git-send-email-rric@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-29irqchip/gicv3-its: Read typer register outside the loopRobert Richter1-3/+2
No need to read the typer register in the loop. Values do not change. This patch is basically a prerequisite for a follow-on patch that adds errata code for Cavium ThunderX. It moves the calculation of the number of id entries to the beginning of the function close to other setup values that are needed to allocate the its table. Now we have a central location to modify the setup parameters and the errata code can be implemented in a single block. Signed-off-by: Robert Richter <rrichter@cavium.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Tirumalesh Chalamarla <tchalamarla@cavium.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1442869119-1814-4-git-send-email-rric@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-29irqchip/gicv3-its: Add range check for number of allocated pagesRobert Richter1-1/+10
The number of pages for the its table may exceed the maximum of 256. Adding a range check and limitting the number to its maximum. Based on a patch from Tirumalesh Chalamarla <tchalamarla@cavium.com>. Signed-off-by: Tirumalesh Chalamarla <tchalamarla@cavium.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1442869119-1814-2-git-send-email-rric@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-15irqchip/gic-v3-its: Add missing cache flushesMarc Zyngier1-1/+5
When the ITS is configured for non-cacheable transactions, make sure that the allocated, zeroed memory is flushed to the Point of Coherency, allowing the ITS to observe the zeros instead of random garbage (or even get its own data overwritten by zeros being evicted from the cache...). Fixes: 241a386c7dbb "irqchip: gicv3-its: Use non-cacheable accesses when no shareability" Reported-and-tested-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Pavel Fedin <p.fedin@samsung.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1442142873-20213-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30irqchip/gicv3-its: Make the PCI/MSI code standaloneMarc Zyngier1-16/+32
We can now lookup the base ITS domain, making it possible to initialize the PCI/MSI code independently from the main ITS subsystem. This allows us to remove all the previously add hooks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-15-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.