aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/irqchip (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-12-29genirq/irqdomain: Rename early argument of irq_domain_activate_irq()Thomas Gleixner1-2/+2
The 'early' argument of irq_domain_activate_irq() is actually used to denote reservation mode. To avoid confusion, rename it before abuse happens. No functional change. Fixes: 72491643469a ("genirq/irqdomain: Update irq_domain_ops.activate() signature") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexandru Chirvasitu <achirvasub@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org
2017-12-28kernel/irq: Extend lockdep class for request mutexAndrew Lunn1-1/+5
The IRQ code already has support for lockdep class for the lock mutex in an interrupt descriptor. Extend this to add a second class for the request mutex in the descriptor. Not having a class is resulting in false positive splats in some code paths. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: linus.walleij@linaro.org Cc: grygorii.strashko@ti.com Cc: f.fainelli@gmail.com Link: https://lkml.kernel.org/r/1512234664-21555-1-git-send-email-andrew@lunn.ch
2017-11-26Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds8-12/+28
Pull irq fixes from Thomas Glexiner: - unbreak the irq trigger type check for legacy platforms - a handful fixes for ARM GIC v3/4 interrupt controllers - a few trivial fixes all over the place * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/matrix: Make - vs ?: Precedence explicit irqchip/imgpdc: Use resource_size function on resource object irqchip/qcom: Fix u32 comparison with value less than zero irqchip/exiu: Fix return value check in exiu_init() irqchip/gic-v3-its: Remove artificial dependency on PCI irqchip/gic-v4: Add forward definition of struct irq_domain_ops irqchip/gic-v3: pr_err() strings should end with newlines irqchip/s3c24xx: pr_err() strings should end with newlines irqchip/gic-v3: Fix ppi-partitions lookup irqchip/gic-v4: Clear IRQ_DISABLE_UNLAZY again if mapping fails genirq: Track whether the trigger type has been set
2017-11-23irqchip/imgpdc: Use resource_size function on resource objectVasyl Gomonovych1-1/+1
drivers/irqchip/irq-imgpdc.c:327:20-23: WARNING: Suspicious code. resource_size is maybe missing with res_regs Generated by: scripts/coccinelle/api/resource_size.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Link: https://lkml.kernel.org/r/1511215361-8279-1-git-send-email-gomonovych@gmail.com
2017-11-23irqchip/qcom: Fix u32 comparison with value less than zeroColin Ian King1-1/+1
The comparison of u32 nregs being less than zero is never true since nregs is unsigned. Fix this by making nregs a signed integer. Fixes: f20cc9b00c7b ("irqchip/qcom: Add IRQ combiner driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Link: https://lkml.kernel.org/r/20171117183553.2739-1-colin.king@canonical.com
2017-11-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-77/+2
Pull ARM SoC platform updates from Arnd Bergmann: "Most of the commits are for defconfig changes, to enable newly added drivers or features that people have started using. For the changed lines lines, we have mostly cleanups, the affected platforms are OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions. The largest single change is the introduction of the TI "sysc" bus driver, with the intention of cleaning up more legacy code. Two new SoC platforms get added this time: - Allwinner R40 is a modernized version of the A20 chip, now with a Quad-Core ARM Cortex-A7. According to the manufacturer, it is intended for "Smart Hardware" - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of chips meant for managed gigabit ethernet switches, based around a Cortex-A9 CPU. Finally, we gain SMP support for two platforms: Renesas R-Car E2 and Amlogic Meson8/8b, which were previously added but only supported uniprocessor operation" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER arm64: defconfig: enable CONFIG_GPIO_UNIPHIER ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b ARM: meson: Add SMP bringup code for Meson8 and Meson8b ARM: smp_scu: allow the platform code to read the SCU CPU status ARM: smp_scu: add a helper for powering on a specific CPU dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init() ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init() ARM: defconfig: select the right SX150X driver arm64: defconfig: Enable QCOM_IOMMU arm64: Add ThunderX drivers to defconfig arm64: defconfig: Enable Tegra PCI controller cpufreq: imx6q: Move speed grading check to cpufreq driver arm64: defconfig: re-enable Qualcomm DB410c USB ARM: configs: stm32: Add MDMA support in STM32 defconfig ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1 bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove bus: ti-sysc: mark PM functions as __maybe_unused ...
2017-11-16Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-4/+10
Pull KVM updates from Radim Krčmář: "First batch of KVM changes for 4.15 Common: - Python 3 support in kvm_stat - Accounting of slabs to kmemcg ARM: - Optimized arch timer handling for KVM/ARM - Improvements to the VGIC ITS code and introduction of an ITS reset ioctl - Unification of the 32-bit fault injection logic - More exact external abort matching logic PPC: - Support for running hashed page table (HPT) MMU mode on a host that is using the radix MMU mode; single threaded mode on POWER 9 is added as a pre-requisite - Resolution of merge conflicts with the last second 4.14 HPT fixes - Fixes and cleanups s390: - Some initial preparation patches for exitless interrupts and crypto - New capability for AIS migration - Fixes x86: - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and after-reset state - Refined dependencies for VMX features - Fixes for nested SMI injection - A lot of cleanups" * tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits) KVM: s390: provide a capability for AIS state migration KVM: s390: clear_io_irq() requests are not expected for adapter interrupts KVM: s390: abstract conversion between isc and enum irq_types KVM: s390: vsie: use common code functions for pinning KVM: s390: SIE considerations for AP Queue virtualization KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup KVM: PPC: Book3S HV: Cosmetic post-merge cleanups KVM: arm/arm64: fix the incompatible matching for external abort KVM: arm/arm64: Unify 32bit fault injection KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared KVM: arm/arm64: vgic-its: New helper functions to free the caches KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device arm/arm64: KVM: Load the timer state when enabling the timer KVM: arm/arm64: Rework kvm_timer_should_fire KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit KVM: arm/arm64: Move phys_timer_emulate function KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps ...
2017-11-15Merge tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-0/+1
Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-14irqchip/exiu: Fix return value check in exiu_init()Wei Yongjun1-2/+2
In case of error, the function of_iomap() returns NULL pointer not ERR_PTR(). Replace the IS_ERR() test of the return value with NULL test and return a proper error code. Fixes: 706cffc1b912 ("irqchip/exiu: Add support for Socionext Synquacer EXIU controller") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: https://lkml.kernel.org/r/1510642648-123574-1-git-send-email-weiyongjun1@huawei.com
2017-11-14Merge tag 'irqchip-4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgentThomas Gleixner5-8/+24
Pull irqchip updates for 4.15, take #4 from Marc Zyngier - A core irq fix for legacy cases where the irq trigger is not reported by firmware - A couple of GICv3/4 fixes (Kconfig, of-node refcount, error handling) - Trivial pr_err fixes
2017-11-13Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds15-322/+1489
Pull irq core updates from Thomas Gleixner: "A rather large update for the interrupt core code and the irq chip drivers: - Add a new bitmap matrix allocator and supporting changes, which is used to replace the x86 vector allocator which comes with separate pull request. This allows to replace the convoluted nested loop allocation function in x86 with a facility which supports the recently added property of managed interrupts proper and allows to switch to a best effort vector reservation scheme, which addresses problems with vector exhaustion. - A large update to the ARM GIC-V3-ITS driver adding support for range selectors. - New interrupt controllers: - Meson and Meson8 GPIO - BCM7271 L2 - Socionext EXIU If you expected that this will stop at some point, I have to disappoint you. There are new ones posted already. Sigh! - STM32 interrupt controller support for new platforms. - A pile of fixes, cleanups and updates to the MIPS GIC driver - The usual small fixes, cleanups and updates all over the place. Most visible one is to move the irq chip drivers Kconfig switches into a separate Kconfig menu" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) genirq: Fix type of shifting literal 1 in __setup_irq() irqdomain: Drop pointless NULL check in virq_debug_show_one genirq/proc: Return proper error code when irq_set_affinity() fails irq/work: Use llist_for_each_entry_safe irqchip: mips-gic: Print warning if inherited GIC base is used irqchip/mips-gic: Add pr_fmt and reword pr_* messages irqchip/stm32: Move the wakeup on interrupt mask irqchip/stm32: Fix initial values irqchip/stm32: Add stm32h7 support dt-bindings/interrupt-controllers: Add compatible string for stm32h7 irqchip/stm32: Add multi-bank management irqchip/stm32: Select GENERIC_IRQ_CHIP irqchip/exiu: Add support for Socionext Synquacer EXIU controller dt-bindings: Add description of Socionext EXIU interrupt controller irqchip/gic-v3-its: Fix VPE activate callback return value irqchip: mips-gic: Make IPI bitmaps static irqchip: mips-gic: Share register writes in gic_set_type() irqchip: mips-gic: Remove gic_vpes variable irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs irqchip: mips-gic: Configure EIC when CPUs come online ...
2017-11-13Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds3-0/+206
Pull OpenRISC updates from Stafford Horne: "The OpenRISC work is a bit more interesting this time, adding SMP support and a few general cleanups. Small Things: - Move OpenRISC docs into Documentation and clean them up - Document previously undocumented devicetree bindings - Update the or1ksim dts to use stdout-path OpenRISC SMP support details: - First the "use shadow registers" and "define CPU_BIG_ENDIAN as true" get the architecture ready for SMP. - The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and qrwlocks" add the SMP locking infrastructure as needed. Using the qspinlocks and qrwlocks as suggested by Peter Z while reviewing the original spinlocks implementation. - The "support for ompic" adds a new irqchip device which is used for IPI communication to support SMP. - The "initial SMP support" adds smp.c and makes changes to all of the necessary data-structures to be per-cpu. The remaining patches are bug fixes and debug helpers which I wanted to keep separate from the "initial SMP support" in order to allow them to be reviewed on their own. This includes: - add cacheflush support to fix icache aliasing - fix initial preempt state for secondary cpu tasks - sleep instead of spin on secondary wait - support framepointers and STACKTRACE_SUPPORT - enable LOCKDEP_SUPPORT and irqflags tracing - timer sync: Add tick timer sync logic - fix possible deadlock in timer sync, pointed out by mips guys Note: the irqchip patch was reviewed with Marc and we agreed to push it together with these patches" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: fix possible deadlock scenario during timer sync openrisc: pass endianness info to sparse openrisc: add tick timer multi-core sync logic openrisc: enable LOCKDEP_SUPPORT and irqflags tracing openrisc: support framepointers and STACKTRACE_SUPPORT openrisc: add simple_smp dts and defconfig for simulators openrisc: add cacheflush support to fix icache aliasing openrisc: sleep instead of spin on secondary wait openrisc: fix initial preempt state for secondary cpu tasks openrisc: initial SMP support irqchip: add initial support for ompic dt-bindings: add openrisc to vendor prefixes list openrisc: use qspinlocks and qrwlocks openrisc: add 1 and 2 byte cmpxchg support openrisc: use shadow registers to save regs on exception dt-bindings: openrisc: Add OpenRISC platform SoC Documentation: openrisc: Updates to README Documentation: Move OpenRISC docs out of arch/ MAINTAINERS: Add OpenRISC pic maintainer openrisc: dts: or1ksim: Add stdout-path
2017-11-13irqchip/gic-v3-its: Remove artificial dependency on PCIMarc Zyngier2-1/+9
The GICv3 ITS doesn't really depend on PCI. Only the PCI/MSI part of it does, and there is no reason not to blow away most of the irqchip stack because PCI is not selected (though not selecting PCI seem to be asking for punishment, but hey...). So let's split the PCI-specific part from the ITS in the Kconfig file, and let's make that part depend on PCI. Architecture specific hacks (arch/arm{,64}/Kconfig) will be addressed in a separate patch. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-13irqchip/gic-v3: pr_err() strings should end with newlinesArvind Yadav1-1/+1
pr_err() messages should end with a new-line to avoid other messages being concatenated. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-13irqchip/s3c24xx: pr_err() strings should end with newlinesArvind Yadav1-2/+2
pr_err() messages should end with a new-line to avoid other messages being concatenated. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-12irqchip/gic-v3: Fix ppi-partitions lookupJohan Hovold1-3/+6
Fix child-node lookup during initialisation, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent gic node was prematurely freed, while the ppi-partitions node was leaked. Fixes: e3825ba1af3a ("irqchip/gic-v3: Add support for partitioned PPIs") Cc: stable <stable@vger.kernel.org> # 4.7 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-10irqchip/gic-v4: Clear IRQ_DISABLE_UNLAZY again if mapping failsMarc Zyngier1-1/+6
Should the call to irq_set_vcpu_affinity() fail at map time, we should restore the normal lazy-disable behaviour instead of staying with the eager disable that GICv4 requires. Reported-by: Eric Auger <eric.auger@redhat.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-09Merge tag 'irqchip-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/coreThomas Gleixner6-54/+396
Pull irqchip updates for 4.15, take #3 from Marc Zyngier: - New Socionext Synquacer EXIU driver - stm32 new platform support and fixes - One GICv4 bugfix - A couple of MIPS GIC cleanups
2017-11-09irqchip: mips-gic: Print warning if inherited GIC base is usedMatt Redfearn1-0/+2
If the physical address of the GIC resource cannot be read from device tree, then the code falls back to reading it from the gcr_gic_base register. Hopefully this has been set to a sane value by the bootloader or some platform code, but is defined by the hardware manual to have "undefined" reset state. Using it as the address at which the GIC will be mapped into physical memory space can therefore be risky if it has not been initialised, since it may result in the GIC being mapped to an effectively random address anywhere in physical memory, where it might conflict with peripherals or RAM and lead to weird crashes. Since a "sane value" is very platform specific because it is particular to the platform's memory map, it is difficult to test for. At the very least, a warning message should be printed in the case that we trust the inherited value. Reported-by: Amit Kama <amit.kama@satixfy.com> Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Reviewed-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-09irqchip/mips-gic: Add pr_fmt and reword pr_* messagesMatt Redfearn1-4/+7
Several messages from the MIPS GIC driver include the text "GIC", but the format is not standard. Add a pr_fmt of "irq-mips-gic: " and reword the messages now that they will be prefixed with the driver name. Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Reviewed-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-07irqchip/stm32: Move the wakeup on interrupt maskLudovic Barre1-5/+5
Move irq_set_wake on interrupt mask, needed to wake up from low power mode as the event mask is not able to do so. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-07irqchip/stm32: Fix initial valuesLudovic Barre1-0/+9
-After cold boot, imr default value depends on hardware configuration. -After hot reboot the registers must be cleared to avoid residue. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-07irqchip/stm32: Add stm32h7 supportLudovic Barre1-0/+42
stm32h7 has up to 96 inputs (3 banks of 32 inputs max). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-07irqchip/stm32: Add multi-bank managementLudovic Barre1-46/+103
-Prepare to manage multi-bank of external interrupts (N banks of 32 inputs). -Prepare to manage registers offsets by compatible (registers offsets could be different follow per stm32 platform). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-07irqchip/stm32: Select GENERIC_IRQ_CHIPLudovic Barre1-0/+1
This patch adds GENERIC_IRQ_CHIP to stm32 exti config. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-07irqchip/exiu: Add support for Socionext Synquacer EXIU controllerArd Biesheuvel2-0/+228
The Socionext Synquacer SoC has an external interrupt unit (EXIU) that forwards a block of 32 configurable input lines to 32 adjacent level-high type GICv3 SPIs. The EXIU has per-interrupt level/edge and polarity controls, and mask bits that keep the outgoing lines de-asserted, even though the controller may still latch interrupt conditions that occur while the line is masked. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-07irqchip/gic-v3-its: Fix VPE activate callback return valueMarc Zyngier1-1/+1
its_vpe_irq_domain_activate should always return 0. Really. There is not a single case why it wouldn't. So this "return true;" is really a copy/paste issue that got revealed now that we actually check the return value of the activate method. Brown paper bag day. Fixes: 2247e1bf7063 ("irqchip/gic-v3-its: Limit scope of VPE mapping to be per ITS") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-06KVM: arm/arm64: Check that system supports split eoi/deactivateChristoffer Dall2-4/+10
Some systems without proper firmware and/or hardware description data don't support the split EOI and deactivate operation. On such systems, we cannot leave the physical interrupt active after the timer handler on the host has run, so we cannot support KVM with an in-kernel GIC with the timer changes we are about to introduce. This patch makes sure that trying to initialize the KVM GIC code will fail on such systems. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-11-05Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-0/+1
Pull irq fix from Ingo Molnar: "An irqchip driver init fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-mvebu-gicp: Add missing spin_lock init
2017-11-03irqchip: add initial support for ompicStafford Horne3-0/+206
IPI driver for the Open Multi-Processor Interrupt Controller (ompic) as described in the Multi-core support section of the OpenRISC 1.2 architecture specification: https://github.com/openrisc/doc/raw/master/openrisc-arch-1.2-rev0.pdf Each OpenRISC core contains a full interrupt controller which is used in the SMP architecture for interrupt balancing. This IPI device, the ompic, is the only external device required for enabling SMP on OpenRISC. Pending ops are stored in a memory bit mask which can allow multiple pending operations to be set and serviced at a time. This is mostly borrowed from the alpha IPI implementation. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: converted ops to bitmask, wrote commit message] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-11-02Merge tag 'irqchip-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/coreThomas Gleixner4-114/+204
Pull the second batch of irqchip updates for 4.15 from marc Zyngier: - A number of MIPS GIC updates and cleanups - One GICv4 update - Another firmware workaround for GICv2 - Support for Mason8 GPIOs - Tiny documentation fix
2017-11-02irqchip: mips-gic: Make IPI bitmaps staticPaul Burton1-2/+2
We have 2 bitmaps used to keep track of interrupts dedicated to IPIs in the MIPS GIC irqchip driver. These bitmaps are only used from the one compilation unit of that driver, and so can be made static. Do so in order to avoid polluting the symbol table & global namespace. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02irqchip: mips-gic: Share register writes in gic_set_type()Paul Burton1-23/+23
The gic_set_type() function included writes to the MIPS GIC polarity, trigger & dual-trigger registers in each case of a switch statement determining the IRQs type. This is all well & good when we only have a single cluster & thus a single GIC whose register we want to update. It will lead to significant duplication once we have multi-cluster support & multiple GICs to update. Refactor this such that we determine values for the polarity, trigger & dual-trigger registers and then have a single set of register writes following the switch statement. This will allow us to write the same values to each GIC in a multi-cluster system in a later patch, rather than needing to duplicate more register writes in each case. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02irqchip: mips-gic: Remove gic_vpes variablePaul Burton1-5/+0
Following the past few patches nothing uses the gic_vpes variable any longer. Remove the dead code. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02irqchip: mips-gic: Use num_possible_cpus() to reserve IPIsPaul Burton1-5/+7
Reserving a number of IPIs based upon the number of VPs reported by the GIC makes little sense for a few reasons: - The kernel may have been configured with NR_CPUS less than the number of VPs in the cluster, in which case using gic_vpes causes us to reserve more interrupts for IPIs than we will possibly use. - If a kernel is configured without support for multi-threading & runs on a system with multi-threading & multiple VPs per core then we'll similarly reserve more interrupts for IPIs than we will possibly use. - In systems with multiple clusters the GIC can only provide us with the number of VPs in its cluster, not across all clusters. In this case we'll reserve fewer interrupts for IPIs than we need. Fix these issues by using num_possible_cpus() instead, which in all cases is actually indicative of how many IPIs we may need. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02irqchip: mips-gic: Configure EIC when CPUs come onlinePaul Burton1-7/+5
Rather than configuring EIC mode for all CPUs during boot, configure it locally on each when they come online. This will become important with multi-cluster support, since clusters may be powered on & off (for example via hotplug) and would lose the EIC configuration when powered off. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02irqchip: mips-gic: Mask local interrupts when CPUs come onlinePaul Burton1-10/+4
We currently walk through the range 0..gic_vpes-1, expecting these values all to be valid Linux CPU numbers to provide to mips_cm_vp_id(), and masking all routable local interrupts during boot. This approach has a few drawbacks: - In multi-cluster systems we won't have access to all CPU's GIC local registers when the driver is probed, since clusters (and their GICs) may be powered down at this point & only brought online later. - In multi-cluster systems we may power down clusters at runtime, for example if we offline all CPUs within it via hotplug, and the cluster's GIC may lose state. We therefore need to reinitialise it when powering back up, which this approach does not take into account. - The range 0..gic_vpes-1 may not all be valid Linux CPU numbers, for example if we run a kernel configured to support fewer CPUs than the system it is running on actually has. In this case we'll get garbage values from mips_cm_vp_id() as we read past the end of the cpu_data array. Fix this and simplify the code somewhat by writing an all-bits-set value to the VP-local reset mask register when a CPU is brought online, before any local interrupts are configured for it. This removes the need for us to access all CPUs during driver probe, removing all of the problems described above. In the name of simplicity we drop the checks for routability of interrupts and simply clear the mask bits for all interrupts. Bits for non-routable local interrupts will have no effect so there's no point performing extra work to avoid modifying them. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02irqchip: mips-gic: Use irq_cpu_online to (un)mask all-VP(E) IRQsPaul Burton1-16/+56
The gic_all_vpes_local_irq_controller chip currently attempts to operate on all CPUs/VPs in the system when masking or unmasking an interrupt. This has a few drawbacks: - In multi-cluster systems we may not always have access to all CPUs in the system. When all CPUs in a cluster are powered down that cluster's GIC may also power down, in which case we cannot configure its state. - Relatedly, if we power down a cluster after having configured interrupts for CPUs within it then the cluster's GIC may lose state & we need to reconfigure it. The current approach doesn't take this into account. - It's wasteful if we run Linux on fewer VPs than are present in the system. For example if we run a uniprocessor kernel on CPU0 of a system with 16 CPUs then there's no point in us configuring CPUs 1-15. - The implementation is also lacking in that it expects the range 0..gic_vpes-1 to represent valid Linux CPU numbers which may not always be the case - for example if we run on a system with more VPs than the kernel is configured to support. Fix all of these issues by only configuring the affected interrupts for CPUs which are online at the time, and recording the configuration in a new struct gic_all_vpes_chip_data for later use by CPUs being brought online. We register a CPU hotplug state (reusing CPUHP_AP_IRQ_GIC_STARTING which the ARM GIC driver uses, and which seems suitably generic for reuse with the MIPS GIC) and execute irq_cpu_online() in order to configure the interrupts on the newly onlined CPU. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02irqchip: mips-gic: Inline gic_local_irq_domain_map()Paul Burton1-36/+22
The gic_local_irq_domain_map() function has only one callsite in gic_irq_domain_map(), and the split between the two functions makes it unclear that they duplicate calculations & checks. Inline gic_local_irq_domain_map() into gic_irq_domain_map() in order to clean this up. Doing this makes the following small issues obvious, and the patch tidies them up: - Both functions used GIC_HWIRQ_TO_LOCAL() to convert a hwirq number to a local IRQ number. We now only do this once. Although the compiler ought to have optimised this away before anyway, the change leaves us with less duplicate code. - gic_local_irq_domain_map() had a check for invalid local interrupt numbers (intr > GIC_LOCAL_INT_FDC). This condition can never occur because any hwirq higher than those used for local interrupts is a shared interrupt, which gic_irq_domain_map() already handles separately. We therefore remove this check. - The decision of whether to map the interrupt to gic_cpu_pin or timer_cpu_pin can be handled within the existing switch statement in gic_irq_domain_map(), shortening the code a little. The change additionally prepares us nicely for the following patch of the series which would otherwise need to duplicate the check for whether a local interrupt should be percpu_devid or just percpu (ie. the switch statement from gic_irq_domain_map()) in gic_local_irq_domain_map(). Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02irqchip/meson-gpio: add support for Meson8 SoCsMartin Blumenstingl1-0/+5
Meson8 uses the same GPIO interrupt controller IP block as the other Meson SoCs. A total of 134 pins can be spied on, which is the sum of: - 22 pins on bank GPIOX - 17 pins on bank GPIOY - 30 pins on bank GPIODV - 10 pins on bank GPIOH - 15 pins on bank GPIOZ - 7 pins on bank CARD - 19 pins on bank BOOT - 14 pins in the AO domain Acked-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02irqchip/gic: Deal with broken firmware exposing only 4kB of GICv2 CPU interfaceMarc Zyngier1-9/+62
There is a lot of broken firmware out there that don't really expose the information the kernel requires when it comes with dealing with GICv2: (1) Firmware that only describes the first 4kB of GICv2 (2) Firmware that describe 128kB of CPU interface, while the usable portion of the address space is between 60 and 68kB So far, we only deal with (2). But we have platforms exhibiting behaviour (1), resulting in two sub-cases: (a) The GIC is occupying 8kB, as required by the GICv2 architecture (b) It is actually spread 128kB, and this is likely to be a version of (2) This patch tries to work around both (a) and (b) by poking at the outside of the described memory region, and try to work out what is actually there. This is of course unsafe, and should only be enabled if there is no way to otherwise fix the DT provided by the firmware (we provide a "irqchip.gicv2_force_probe" option to that effect). Note that for the time being, we restrict ourselves to GICv2 implementations provided by ARM, since there I have no knowledge of an alternative implementations. This could be relaxed if such an implementation comes to light on a broken platform. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02irqchip/gic-v3-its: Setup VLPI properties at map timeMarc Zyngier1-2/+16
So far, we require the hypervisor to update the VLPI properties once the the VLPI mapping has been established. While this makes it easy for the ITS driver, it creates a window where an incoming interrupt can be delivered with an unknown set of properties. Not very nice. Instead, let's add a "properties" field to the mapping structure, and use that to configure the VLPI before it actually gets mapped. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02Merge tag 'v4.14-rc3' into irq/irqchip-4.15Marc Zyngier1-5/+8
Required merge to get mainline irqchip updates. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman10-0/+10
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01irqchip/irq-mvebu-gicp: Add missing spin_lock initAntoine Tenart1-0/+1
A spin lock is used in the irq-mvebu-gicp driver, but it is never initialized. This patch adds the missing spin_lock_init() call in the driver's probe function. Fixes: a68a63cb4dfc ("irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP") Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: gregory.clement@free-electrons.com Acked-by: marc.zyngier@arm.com Cc: thomas.petazzoni@free-electrons.com Cc: andrew@lunn.ch Cc: jason@lakedaemon.net Cc: nadavh@marvell.com Cc: miquel.raynal@free-electrons.com Cc: linux-arm-kernel@lists.infradead.org Cc: sebastian.hesselbarth@gmail.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20171025072326.21030-1-antoine.tenart@free-electrons.com
2017-10-20irqchip/meson: Disable COMPILE_TESTThomas Gleixner1-1/+1
The driver fails to compile with CONFIG_COMPILE_TEST=y on x86: irq-meson-gpio.c: In function ‘meson_gpio_irq_parse_dt’: irq-meson-gpio.c:343:8: error: implicit declaration of function ‘of_property_read_variable_u32_array’ ret = of_property_read_variable_u32_array(node, Adding COMPILE_TEST to a driver requires at least compile testing it for x86.... Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19Merge tag 'arm-soc/for-4.15/soc' of http://github.com/Broadcom/stblinux into next/socArnd Bergmann1-77/+2
Pull "Broadcom soc changes for 4.15 (part 1)" from Florian Fainelli: This pull request contains Broadcom ARM-based SoC/Kconfig changes for 4.15 please pull the following: - Danilo removes the clock provider driver stubs which are no longer needed now that we have a proper CPRMAN clock provider driver - Stefan moves the SMP startup code for BCM2836 from the interrupt controller driver down to where it belongs in the architecture code, this was requested by Marc Zyngier before comitting any fixes to that code - Phil provides a fix for a future Raspberry Pi firmware which will make the secondary cores wait for an event and therefore requires the CPU onlining other cores to send such event (along with the appropriate barrier) - Florian fixes the BRCMSTB UART debug stub to work correctly when using an ARM BE8 kernel since there were some missing register read swapping needed * tag 'arm-soc/for-4.15/soc' of http://github.com/Broadcom/stblinux: ARM: brcmstb: Add appropriate ARM_BE8() macros for swapping ARM: bcm2836: Send event when onlining other cores irqchip: bcm2836: Move SMP startup code to arch/arm (v2) clk: bcm2835: remove remains from stub clk driver
2017-10-19irqchip/aspeed-i2c-ic: Fix return value check in aspeed_i2c_ic_of_init()Wei Yongjun1-2/+2
In case of error, the function of_iomap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test.. Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/meson: Add support for gpio interrupt controllerJerome Brunet3-0/+423
Add support for the interrupt gpio controller found on Amlogic's meson SoC family. This controller is a separate controller from the gpio controller. It is able to spy on the SoC pad. It is essentially a 256 to 8 router with a filtering block to select level or edge and polarity. The number of actual mappable inputs depends on the SoC. Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqchip/gic-v3-its: Update effective affinity on VPE mappingMarc Zyngier1-0/+6
When setting the affinity of a VPE (either because we map or move it), make sure the effective affinity is correctly reported back to the core kernel. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.