aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/irqchip (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-07-05irqchip/mips-gic: Match IPI IRQ domain by bus token onlyPaul Burton1-1/+1
Commit fbde2d7d8290 ("MIPS: Add generic SMP IPI support") introduced code which calls irq_find_matching_host with a NULL node parameter in order to discover IPI IRQ domains which are not associated with the DT root node's interrupt parent. This suggests that implementations of IPI IRQ domains should effectively ignore the node parameter if it is NULL and search purely based upon the bus token. Commit 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") did not do this when implementing the GIC IPI IRQ domain, and on MIPS Boston boards this leads to no IPI domain being discovered and a NULL pointer dereference when attempting to send an IPI: CPU 0 Unable to handle kernel paging request at virtual address 0000000000000040, epc == ffffffff8016e70c, ra == ffffffff8010ff5c Oops[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc6-00223-gad0d1b6 #945 task: a8000000ff066fc0 ti: a8000000ff068000 task.ti: a8000000ff068000 $ 0 : 0000000000000000 0000000000000001 ffffffff80730000 0000000000000003 $ 4 : 0000000000000000 ffffffff8057e5b0 a800000001e3ee00 0000000000000000 $ 8 : 0000000000000000 0000000000000023 0000000000000001 0000000000000001 $12 : 0000000000000000 ffffffff803323d0 0000000000000000 0000000000000000 $16 : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc $20 : 0000000000000000 ffffffff8057e5b0 0000000000000001 0000000000000000 $24 : 0000000000000000 ffffffff8012de28 $28 : a8000000ff068000 a8000000ff06fbc0 0000000000000000 ffffffff8010ff5c Hi : ffffffff8014c174 Lo : a800000001e1e140 epc : ffffffff8016e70c __ipi_send_mask+0x24/0x11c ra : ffffffff8010ff5c mips_smp_send_ipi_mask+0x68/0x178 Status: 140084e2 KX SX UX KERNEL EXL Cause : 00800008 (ExcCode 02) BadVA : 0000000000000040 PrId : 0001a920 (MIPS I6400) Process swapper/0 (pid: 1, threadinfo=a8000000ff068000, task=a8000000ff066fc0, tls=0000000000000000) Stack : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc 0000000000000000 ffffffff8057e5b0 0000000000000001 ffffffff8010ff5c 0000000000000001 0000000000000020 0000000000000000 0000000000000000 0000000000000000 ffffffff801108fc 0000000000000000 0000000000000001 0000000000000001 0000000000000000 0000000000000000 ffffffff801865e8 a8000000ff0c7500 a8000000ff06fc90 0000000000000001 0000000000000002 ffffffff801108fc ffffffff801868b8 0000000000000000 ffffffff801108fc 0000000000000000 0000000000000003 ffffffff8068c700 0000000000000001 ffffffff80730000 0000000000000001 a8000000ff00a290 ffffffff80110c50 0000000000000003 a800000001e48308 0000000000000003 0000000000000008 ... Call Trace: [<ffffffff8016e70c>] __ipi_send_mask+0x24/0x11c [<ffffffff8010ff5c>] mips_smp_send_ipi_mask+0x68/0x178 [<ffffffff801865e8>] generic_exec_single+0x150/0x170 [<ffffffff801868b8>] smp_call_function_single+0x108/0x160 [<ffffffff80110c50>] cps_boot_secondary+0x328/0x394 [<ffffffff80110534>] __cpu_up+0x38/0x90 [<ffffffff8012de4c>] bringup_cpu+0x24/0xac [<ffffffff8012df40>] cpuhp_up_callbacks+0x58/0xdc [<ffffffff8012e648>] cpu_up+0x118/0x18c [<ffffffff806dc158>] smp_init+0xbc/0xe8 [<ffffffff806d4c18>] kernel_init_freeable+0xa0/0x228 [<ffffffff8056c908>] kernel_init+0x10/0xf0 [<ffffffff80105098>] ret_from_kernel_thread+0x14/0x1c Fix this by allowing the GIC IPI IRQ domain to match purely based upon the bus token if the node provided is NULL. Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Qais Yousef <qsyousef@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160705132600.27730-2-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-05irqchip/mips-gic: Map to VPs using HW VPNumPaul Burton1-1/+1
When mapping an interrupt to a VP(E) we must use the identifier for the VP that the hardware expects, and this does not always match up with the Linux CPU number. Commit d46812bb0bef ("irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDR") corrected this for the cases that existed at the time it was written, but commit 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") added another case before the former patch was merged. This leads to incorrectly using Linux CPU numbers when mapping interrupts to VPs, which breaks on certain systems such as those with multi-core I6400 CPUs. Fix by adding the appropriate call to mips_cm_vp_id() to retrieve the expected VP identifier. Fixes: d46812bb0bef ("irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDR") Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Qais Yousef <qsyousef@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160705132600.27730-1-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-14irqchip/mips-gic: Fix IRQs in gic_dev_domainHarvey Hunt1-1/+11
When allocating a new device IRQ, gic_dev_domain_alloc() correctly calls irq_domain_set_hwirq_and_chip(), but gic_irq_domain_alloc() does not. This means that gic_irq_domain believes all IRQs from the dev domain have an hwirq of 0 and creates incorrect mappings in the linear_revmap. As gic_irq_domain is a parent of the gic_dev_domain, this leads to an inability to boot on devices with a GIC. Excerpt of the error: [ 2.297649] irq 0: nobody cared (try booting with the "irqpoll" option) ... [ 2.436963] handlers: [ 2.439492] Disabling IRQ #0 Fix this by calling irq_domain_set_hwirq_and_chip() for both the dev and irq domain. Now that we are modifying the parent domain, be sure to clear it up in case of an allocation error. Fixes: c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Tested-by: Govindraj Raja <Govindraj.Raja@imgtec.com> # On Pistachio SoC Reviewed-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Qais Yousef <qsyousef@gmail.com> Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1464001552-31174-1-git-send-email-harvey.hunt@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-02irqchip/irq-pic32-evic: Fix bug with external interrupts.Joshua Henderson1-1/+1
The wrong external interrupt bits are being set, offset by 1. Signed-off-by: Joshua Henderson <digitalpeer@digitalpeer.com> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-02irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144Ganapatrao Kulkarni1-2/+47
The erratum fixes the hang of ITS SYNC command by avoiding inter node io and collections/cpu mapping on thunderx dual-socket platform. This fix is only applicable for Cavium's ThunderX dual-socket platform. Reviewed-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-02irqchip/gic-v3: Fix quiescence check in gic_enable_redistAndrew Jones1-1/+1
Make sure the two sides of the bitwise operation are bool. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-28Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-1/+9
Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ...
2016-05-28irqchip: mips-gic: Setup EIC mode on each CPU if it's in usePaul Burton1-1/+9
When EIC mode is in use (cpu_has_veic is true) enable it on each CPU during GIC initialisation. Otherwise there may be a mismatch between the hardware default interrupt model & that expected by the kernel. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: Matt Redfearn <matt.redfearn@imgtec.com> Tested-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13274/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-27remove lots of IS_ERR_VALUE abusesArnd Bergmann4-4/+4
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20irqchip: nps: add 64BIT dependencyArnd Bergmann1-0/+1
The newly added nps irqchip driver causes build warnings on ARM64. include/soc/nps/common.h: In function 'nps_host_reg_non_cl': include/soc/nps/common.h:148:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] As the driver is only used on ARC, we don't need to see it without COMPILE_TEST elsewhere, and we can avoid the warnings by only building on 32-bit architectures even with CONFIG_COMPILE_TEST. Acked-by: Marc Zyngier <narc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds4-34/+246
Pull KVM updates from Paolo Bonzini: "Small release overall. x86: - miscellaneous fixes - AVIC support (local APIC virtualization, AMD version) s390: - polling for interrupts after a VCPU goes to halted state is now enabled for s390 - use hardware provided information about facility bits that do not need any hypervisor activity, and other fixes for cpu models and facilities - improve perf output - floating interrupt controller improvements. MIPS: - miscellaneous fixes PPC: - bugfixes only ARM: - 16K page size support - generic firmware probing layer for timer and GIC Christoffer Dall (KVM-ARM maintainer) says: "There are a few changes in this pull request touching things outside KVM, but they should all carry the necessary acks and it made the merge process much easier to do it this way." though actually the irqchip maintainers' acks didn't make it into the patches. Marc Zyngier, who is both irqchip and KVM-ARM maintainer, later acked at http://mid.gmane.org/573351D1.4060303@arm.com ('more formally and for documentation purposes')" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (82 commits) KVM: MTRR: remove MSR 0x2f8 KVM: x86: make hwapic_isr_update and hwapic_irr_update look the same svm: Manage vcpu load/unload when enable AVIC svm: Do not intercept CR8 when enable AVIC svm: Do not expose x2APIC when enable AVIC KVM: x86: Introducing kvm_x86_ops.apicv_post_state_restore svm: Add VMEXIT handlers for AVIC svm: Add interrupt injection via AVIC KVM: x86: Detect and Initialize AVIC support svm: Introduce new AVIC VMCB registers KVM: split kvm_vcpu_wake_up from kvm_vcpu_kick KVM: x86: Introducing kvm_x86_ops VCPU blocking/unblocking hooks KVM: x86: Introducing kvm_x86_ops VM init/destroy hooks KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_reg KVM: x86: Misc LAPIC changes to expose helper functions KVM: shrink halt polling even more for invalid wakeups KVM: s390: set halt polling to 80 microseconds KVM: halt_polling: provide a way to qualify wakeups during poll KVM: PPC: Book3S HV: Re-enable XICS fast path for irqfd-generated interrupts kvm: Conditionally register IRQ bypass consumer ...
2016-05-19Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-5/+17
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.7. Here's the summary of the changes: - ATH79: Support for DTB passuing using the UHI boot protocol - ATH79: Remove support for builtin DTB. - ATH79: Add zboot debug serial support. - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega and DPT-Module. - ATH79: Update devicetree clock support for AR9132 and AR9331. - ATH79: Cleanup the DT code. - ATH79: Support newer SOCs in ath79_ddr_ctrl_init. - ATH79: Fix regression in PCI window initialization. - BCM47xx: Move SPROM driver to drivers/firmware/ - BCM63xx: Enable partition parser in defconfig. - BMIPS: BMIPS5000 has I cache filing from D cache - BMIPS: BMIPS: Add cpu-feature-overrides.h - BMIPS: Add Whirlwind support - BMIPS: Adjust mips-hpt-frequency for BCM7435 - BMIPS: Remove maxcpus from BCM97435SVMB DTS - BMIPS: Add missing 7038 L1 register cells to BCM7435 - BMIPS: Various tweaks to initialization code. - BMIPS: Enable partition parser in defconfig. - BMIPS: Cache tweaks. - BMIPS: Add UART, I2C and SATA devices to DT. - BMIPS: Add BCM6358 and BCM63268support - BMIPS: Add device tree example for BCM6358. - BMIPS: Improve Improve BCM6328 and BCM6368 device trees - Lantiq: Add support for device tree file from boot loader - Lantiq: Allow build with no built-in DT. - Loongson 3: Reserve 32MB for RS780E integrated GPU. - Loongson 3: Fix build error after ld-version.sh modification - Loongson 3: Move chipset ACPI code from drivers to arch. - Loongson 3: Speedup irq processing. - Loongson 3: Add basic Loongson 3A support. - Loongson 3: Set cache flush handlers to nop. - Loongson 3: Invalidate special TLBs when needed. - Loongson 3: Fast TLB refill handler. - MT7620: Fallback strategy for invalid syscfg0. - Netlogic: Fix CP0_EBASE redefinition warnings - Octeon: Initialization fixes - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig - Octeon: Correctly handle endian-swapped initramfs images. - Octeon: Support CN73xx, CN75xx and CN78xx. - Octeon: Remove dead code from cvmx-sysinfo. - Octeon: Extend number of supported CPUs past 32. - Octeon: Remove some code limiting NR_IRQS to 255. - Octeon: Simplify octeon_irq_ciu_gpio_set_type. - Octeon: Mark some functions __init in smp.c - Octeon: Octeon: Add Octeon III CN7xxx interface detection - PIC32: Add serial driver and bindings for it. - PIC32: Add PIC32 deadman timer driver and bindings. - PIC32: Add PIC32 clock timer driver and bindings. - Pistachio: Determine SoC revision during boot - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER. - Sibyte: Strip redundant comments from bcm1480_regs.h. - Panic immediately if panic_on_oops is set. - module: fix incorrect IS_ERR_VALUE macro usage. - module: Make consistent use of pr_* - Remove no longer needed work_on_cpu() call. - Remove CONFIG_IPV6_PRIVACY from defconfigs. - Fix registers of non-crashing CPUs in dumps. - Handle MIPSisms in new vmcore_elf32_check_arch. - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work. - Allow RIXI to be used on non-R2 or R6 cores. - Reserve nosave data for hibernation - Fix siginfo.h to use strict POSIX types. - Don't unwind user mode with EVA. - Fix watchpoint restoration - Ptrace watchpoints for R6. - Sync icache when it fills from dcache - I6400 I-cache fills from dcache. - Various MSA fixes. - Cleanup MIPS_CPU_* definitions. - Signal: Move generic copy_siginfo to signal.h - Signal: Fix uapi include in exported asm/siginfo.h - Timer fixes for sake of KVM. - XPA TLB refill fixes. - Treat perf counter feature - Update John Crispin's email address - Add PIC32 watchdog and bindings. - Handle R10000 LL/SC bug in set_pte() - cpufreq: Various fixes for Longson1. - R6: Fix R2 emulation. - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes - ELF: ABI and FP fixes. - Allow for relocatable kernel and use that to support KASLR. - Fix CPC_BASE_ADDR mask - Plenty fo smp-cps, CM, R6 and M6250 fixes. - Make reset_control_ops const. - Fix kernel command line handling of leading whitespace. - Cleanups to cache handling. - Add brcm, bcm6345-l1-intc device tree bindings. - Use generic clkdev.h header - Remove CLK_IS_ROOT usage. - Misc small cleanups. - CM: Fix compilation error when !MIPS_CM - oprofile: Fix a preemption issue - Detect DSP ASE v3 support:1" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits) MIPS: pic32mzda: fix getting timer clock rate. MIPS: ath79: fix regression in PCI window initialization MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs MIPS: Fix VZ probe gas errors with binutils <2.24 MIPS: perf: Fix I6400 event numbers MIPS: DEC: Export `ioasic_ssr_lock' to modules MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC MIPS: CM: Fix compilation error when !MIPS_CM MIPS: Fix genvdso error on rebuild USB: ohci-jz4740: Remove obsolete driver MIPS: JZ4740: Probe OHCI platform device via DT MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant MIPS: pistachio: Determine SoC revision during boot MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435 mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type MIPS: Prevent "restoration" of MSA context in non-MSA kernels MIPS: cevt-r4k: Dynamically calculate min_delta_ns MIPS: malta-time: Take seconds into account MIPS: malta-time: Start GIC count before syncing to RTC MIPS: Force CPUs to lose FP context during mode switches ...
2016-05-19Merge tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds3-0/+172
Pull ARC updates from Vineet Gupta: "We have a relatively big changeset for ARC for 4.7. The highlight is support for EZChip (now Mellanox) NPS-400 network processor, a 400-Gb throughput C-programmable packet processor based on ARC700 cores from Synopsys. See http://www.mellanox.com/related-docs/prod_npu/PB_NPS-400.pdf Also present are irqchip and clocksource drivers for NPS as agreed with respective maintainers to go via ARC tree due to an soc header dependency. I have the needed ACKs from Jason, Marc, Daniel. You might run into a trivial merge conflict in drivers/irqchip/* This EZChip platform support required some deep changes in ARC architecture code and also opportunity to cleanup past sins (legacy irq domains, missing irq domain lookup, hard coded timer irqs...) Summary: - Support for EZChip (now Mellanox) NPS-400 Network processor based on ARC700 - NPS interrupt controller and clocksource drivers - ARC timers probed off DT - ARC iqrchips switching to linear domain (upgrade from legacy domains)" * tag 'arc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (37 commits) arc: axs103_smp: Fix CPU frequency to 100MHz for dual-core arc: axs10x: Add DT bindings for I2S PLL Clock ARC: pae: STRICT_MM_TYPECHECKS was broken ARC: Add eznps platform to Kconfig and Makefile ARC: [plat-eznps] Use dedicated COMMAND_LINE_SIZE ARC: [plat-eznps] Use dedicated cpu_relax() ARC: [plat-eznps] Use dedicated identity auxiliary register. ARC: [plat-eznps] Use dedicated SMP barriers ARC: [plat-eznps] Use dedicated atomic/bitops/cmpxchg ARC: [plat-eznps] Use dedicated user stack top ARC: [plat-eznps] Add eznps platform ARC: [plat-eznps] Add eznps board defconfig and dts ARC: Mark secondary cpu online only after all HW setup is done ARC: rwlock: disable interrupts in !LLSC variant ARC: Make vmalloc size configurable ARC: clean out UAPI byteorder.h clean off Kconfig symbol irqchip: add nps Internal and external irqchips clocksource: Add NPS400 timers driver soc: Support for EZchip SoC Documentation: Add EZchip vendor to binding list ...
2016-05-18Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+1
Pull ARM SoC platform updates from Arnd Bergmann: "We get support for three new 32-bit SoC platforms this time. The amount of changes in arch/arm for any of them is miniscule, as all the interesting code is in device driver subsystems (irqchip, clk, pinctrl, ...) these days. I'm listing them here, as the addition of the Kconfig statement is the main relevant milestone for a new platform. In each case, some drivers are are shared with existing platforms, while other drivers are added for v4.7 as well, or come in a later release. - The Aspeed platform is probably the most interesting one, this is what most whitebox servers use as their baseboard management controller. We get support for the very common ast2400 and ast2500 SoCs. The OpenBMC project focuses on this chip, and the LWN article about their ELC 2016 presentation at https://lwn.net/Articles/683320/ triggered the submission, but the code comes from IBM's OpenPOWER team rather than the team at Facebook. There are still a lot more drivers that need to get added over time, and I hope both teams can work together on that. - OXNAS is an old platform for Network Attached Storage devices from Oxford Semiconductor. There are models with ARM10 (!) and ARM11MPCore cores, but for now, we only support the original ARM9 based versions. The product lineup was subsequently part of PLX, Avago and now the new Broadcom Ltd. https://wiki.openwrt.org/doc/hardware/soc/soc.oxnas has some more information. - V2M-MPS2 is a prototyping platform from ARM for their Cortex-M cores and is related to the existing Realview / Versatile Express lineup, but without MMU. We now support various NOMMU platforms, so adding a new one is fairly straightforward. http://infocenter.arm.com/help/topic/com.arm.doc.100112_0100_03_en/ has detailed information about the platform. Other noteworthy updates: - Work on LPC32xx has resumed, and Vladimir Zapolskiy and Sylvain Lemieux are now maintaining the platform. This is an older ARM9 based platform from NXP (not Freescale), but it remains in use in embedded markets. - Kevin Hilman is now co-maintaining the Amlogic Meson platform for both 32-bit and 64-bit ARM, and started contributing some patches. - As is often the case, work on the OMAP platforms makes up the bulk of the actual SoC code changes in arch/arm, but there isn't a lot of that either" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) MAINTAINERS: ARM/Amlogic: add co-maintainer, misc. updates MAINTAINERS: add ARM/NXP LPC32XX SoC specific drivers to the section MAINTAINERS: add new maintainers of NXP LPC32xx SoC MAINTAINERS: move ARM/NXP LPC32xx record to ARM section arm: Add Aspeed machine ARM: lpc32xx: remove duplicate const on lpc32xx_auxdata_lookup ARM: lpc32xx: remove leftovers of legacy clock source and provider drivers ARM: lpc32xx: remove reboot header file ARM: dove: Remove CLK_IS_ROOT ARM: orion5x: Remove CLK_IS_ROOT ARM: mv78xx0: Remove CLK_IS_ROOT ARM: davinci: da850: use clk->set_parent for async3 ARM: davinci: Move clock init after ioremap. MAINTAINERS: Update ARM Versatile Express platform entry ARM: vexpress/mps2: introduce MPS2 platform MAINTAINERS: add maintainer entry for ARM/OXNAS platform ARM: Add new mach-oxnas irqchip: versatile-fpga: add new compatible for OX810SE SoC ARM: uniphier: correct the call order of of_node_put() MAINTAINERS: fix stale TI DaVinci entries ...
2016-05-17Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds15-135/+1229
Pull irq updates from Thomas Gleixner: "This update delivers: - Yet another interrupt chip diver (LPC32xx) - Core functions to handle partitioned per-cpu interrupts - Enhancements to the IPI core - Proper handling of irq type configuration - A large set of ARM GIC enhancements - The usual pile of small fixes, cleanups and enhancements" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) irqchip/bcm2836: Use a more generic memory barrier call irqchip/bcm2836: Fix compiler warning on 64-bit build irqchip/bcm2836: Drop smp_set_ops on arm64 builds irqchip/gic: Add helper functions for GIC setup and teardown irqchip/gic: Store GIC configuration parameters irqchip/gic: Pass GIC pointer to save/restore functions irqchip/gic: Return an error if GIC initialisation fails irqchip/gic: Remove static irq_chip definition for eoimode1 irqchip/gic: Don't initialise chip if mapping IO space fails irqchip/gic: WARN if setting the interrupt type for a PPI fails irqchip/gic: Don't unnecessarily write the IRQ configuration irqchip: Mask the non-type/sense bits when translating an IRQ genirq: Ensure IRQ descriptor is valid when setting-up the IRQ irqchip/gic-v3: Configure all interrupts as non-secure Group-1 irqchip/gic-v2m: Add workaround for Broadcom NS2 GICv2m erratum irqchip/irq-alpine-msi: Don't use <asm-generic/msi.h> irqchip/mbigen: Checking for IS_ERR() instead of NULL irqchip/gic-v3: Remove inexistant register definition irqchip/gicv3-its: Don't allow devices whose ID is outside range irqchip: Add LPC32xx interrupt controller driver ...
2016-05-16Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds1-3/+2
Pull arm64 updates from Will Deacon: - virt_to_page/page_address optimisations - support for NUMA systems described using device-tree - support for hibernate/suspend-to-disk - proper support for maxcpus= command line parameter - detection and graceful handling of AArch64-only CPUs - miscellaneous cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits) arm64: do not enforce strict 16 byte alignment to stack pointer arm64: kernel: Fix incorrect brk randomization arm64: cpuinfo: Missing NULL terminator in compat_hwcap_str arm64: secondary_start_kernel: Remove unnecessary barrier arm64: Ensure pmd_present() returns false after pmd_mknotpresent() arm64: Replace hard-coded values in the pmd/pud_bad() macros arm64: Implement pmdp_set_access_flags() for hardware AF/DBM arm64: Fix typo in the pmdp_huge_get_and_clear() definition arm64: mm: remove unnecessary EXPORT_SYMBOL_GPL arm64: always use STRICT_MM_TYPECHECKS arm64: kvm: Fix kvm teardown for systems using the extended idmap arm64: kaslr: increase randomization granularity arm64: kconfig: drop CONFIG_RTC_LIB dependency arm64: make ARCH_SUPPORTS_DEBUG_PAGEALLOC depend on !HIBERNATION arm64: hibernate: Refuse to hibernate if the boot cpu is offline arm64: kernel: Add support for hibernate/suspend-to-disk PM / Hibernate: Call flush_icache_range() on pages restored in-place arm64: Add new asm macro copy_page arm64: Promote KERNEL_START/KERNEL_END definitions to a header file arm64: kernel: Include _AC definition in page.h ...
2016-05-13irqchip: mips-gic: Provide VP ID accessorPaul Burton1-0/+8
Provide a gic_read_local_vp_id() function to read the VCNUM field of the GICs local VP_IDENT register. This will be used by a further patch to check that the value reported by the GIC matches up with the kernels calculation. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12334/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDRPaul Burton1-5/+9
The Linux CPU number doesn't necessarily match up with the ID used for a VP by hardware. Convert the CPU number to the HW ID using mips_cm_vp_id when writing to the VP(E)_OTHER_ADDR register in order to ensure that we correctly access registers for the VPs of secondary cores. This most notably affects systems using CM3, such as those based around I6400. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12333/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-11irqchip/bcm2836: Use a more generic memory barrier callEric Anholt1-1/+1
dsb() requires an argument on arm64, so we needed to add "sy". Instead, take this opportunity to switch to the same smp_wmb() call that gic uses for its IPIs. This is a less strong barrier than we were doing before (dmb(ishst) compared to dsb(sy)), but it seems to be the correct one. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/bcm2836: Fix compiler warning on 64-bit buildEric Anholt1-1/+1
Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/bcm2836: Drop smp_set_ops on arm64 buildsEric Anholt1-1/+5
For arm64, the bootloader will instead be implementing the spin-table enable method. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Add helper functions for GIC setup and teardownJon Hunter1-19/+42
Move the code that sets-up a GIC via device-tree into it's own function and add a generic function for GIC teardown that can be used for both device-tree and ACPI to unmap the GIC memory. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Store GIC configuration parametersJon Hunter1-49/+65
Store the GIC configuration parameters in the GIC chip data structure. This will allow us to simplify the code by reducing the number of parameters passed between functions. Update the __gic_init_bases() function so that we only need to pass a pointer to the GIC chip data structure and no longer need to pass the GIC index in order to look-up the chip data. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Pass GIC pointer to save/restore functionsJon Hunter1-35/+39
Instead of passing the GIC index to the save/restore functions pass a pointer to the GIC chip data. This will allow these save/restore functions to be re-used by a platform driver where the GIC chip data structure is allocated dynamically and so there is no applicable index for identifying the GIC. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Return an error if GIC initialisation failsJon Hunter1-26/+73
If the GIC initialisation fails, then currently we do not return an error or clean-up afterwards. Although for root controllers, this failure may be fatal anyway, for secondary controllers, it may not be fatal and so return an error on failure and clean-up. Update the functions gic_cpu_init() and gic_pm_init() to return an error instead of calling BUG() and perform any necessary clean-up. For non-banked GIC controllers, make sure that we free any memory allocated if we fail to initialise the IRQ domain. Please note that free_percpu() only frees memory if the pointer passed to it is not NULL and so it is unnecessary to check if both pointers are valid or not. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Remove static irq_chip definition for eoimode1Jon Hunter1-16/+6
There are only 3 differences (not including the name) in the definitions of the gic_chip and gic_eoimode1_chip structures. Instead of statically defining the gic_eoimode1_chip structure, remove it and populate the eoimode1 functions dynamically for the appropriate GIC irqchips. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Don't initialise chip if mapping IO space failsJon Hunter1-2/+6
If we fail to map the address space for the GIC distributor or CPU interface, then don't attempt to initialise the chip, just WARN and return. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: WARN if setting the interrupt type for a PPI failsJon Hunter1-4/+12
Setting the interrupt type for private peripheral interrupts (PPIs) may not be supported by a given GIC because it is IMPLEMENTATION DEFINED whether this is allowed. There is no way to know if setting the type is supported for a given GIC and so the value written is read back to verify it matches the desired configuration. If it does not match then an error is return. There are cases where the interrupt configuration read from firmware (such as a device-tree blob), has been incorrect and hence gic_configure_irq() has returned an error. This error has gone undetected because the error code returned was ignored but the interrupt still worked fine because the configuration for the interrupt could not be overwritten. Given that this has done undetected and that failing to set the configuration for a PPI may not be a catastrophic, don't return an error but WARN if we fail to configure a PPI. This will allows us to fix up any places in the kernel where we should be checking the return status and maintain backward compatibility with firmware images that may have incorrect PPI configurations. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Don't unnecessarily write the IRQ configurationJon Hunter1-2/+6
If the interrupt configuration matches the current configuration, then don't bother writing the configuration again. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip: Mask the non-type/sense bits when translating an IRQJon Hunter2-2/+2
The firmware parameter that contains the IRQ sense bits may also contain other data. When return the IRQ type, bits outside of these sense bits should be masked. If these bits are not masked and irq_create_fwspec_mapping() is called to map an IRQ, then the comparison of the type returned from irq_domain_translate() will never match that returned by irq_get_trigger_type() (because this function masks the none sense bits) and so we will always call irq_set_irq_type() to program the type even if it was not really necessary. Currently, the downside to this is unnecessarily re-programmming the type but nevertheless this should be avoided. The Tegra LIC and TI Crossbar irqchips all have client instances (from reviewing the device-tree sources) where bits outside the IRQ sense bits are set, but do not mask these bits. Therefore, ensure these bits are masked for these irqchips. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic-v3: Configure all interrupts as non-secure Group-1Marc Zyngier1-0/+12
The GICv3 driver wrongly assumes that it runs on the non-secure side of a secure-enabled system, while it could be on a system with a single security state, or a GICv3 with GICD_CTLR.DS set. Either way, it is important to configure this properly, or interrupts will simply not be delivered on this HW. Cc: stable@vger.kernel.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic-v2m: Add workaround for Broadcom NS2 GICv2m erratumRay Jui1-2/+17
Alex Barba <alex.barba@broadcom.com> discovered Broadcom NS2 GICv2m implementation has an erratum where the MSI data needs to be the SPI number subtracted by an offset of 32, for the correct MSI interrupt to be triggered. Here we are adding the workaround based on readings from the MSI_IIDR register, which contains a value unique to Broadcom NS2 GICv2m Reported-by: Alex Barba <alex.barba@broadcom.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/irq-alpine-msi: Don't use <asm-generic/msi.h>Christoph Hellwig1-1/+1
Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/mbigen: Checking for IS_ERR() instead of NULLDan Carpenter1-2/+2
of_platform_device_create() returns NULL on error, it never returns error pointers. Fixes: ed2a1002d25c ('irqchip/mbigen: Handle multiple device nodes in a mbigen module') Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gicv3-its: Don't allow devices whose ID is outside rangeShanker Donthineni1-4/+38
We are not checking whether the requested device identifier fits into the device table memory or not. The function its_create_device() assumes that enough memory has been allocated for whole DevID space (reported by ITS_TYPER.Devbits) during the ITS probe() and continues to initialize ITS hardware. This assumption is not perfect, sometimes we reduce memory size either because of its size crossing MAX_ORDER-1 or BASERn max size limit. The MAPD command fails if 'Device ID' is outside of device table range. Add a simple validation check to avoid MAPD failures since we are not handling ITS command errors. This change also helps to return an error -ENOMEM instead of success to caller. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip: Add LPC32xx interrupt controller driverVladimir Zapolskiy2-0/+239
The change adds improved support of NXP LPC32xx MIC, SIC1 and SIC2 interrupt controllers. This is a list of new features in comparison to the legacy driver: * irq types are taken from device tree settings, no more need to hardcode them, * old driver is based on irq_domain_add_legacy, which causes problems with handling MIC hardware interrupt 0 produced by SIC1, * there is one driver for MIC, SIC1 and SIC2, no more need to handle them separately, e.g. have two separate handlers for SIC1 and SIC2, * the driver does not have any dependencies on hardcoded register offsets, * the driver is much simpler for maintenance, * SPARSE_IRQS option is supported. Legacy LPC32xx interrupt controller driver was broken since commit 76ba59f8366f ("genirq: Add irq_domain-aware core IRQ handler"), which requires a private interrupt handler, otherwise any SIC1 generated interrupt (mapped to MIC hwirq 0) breaks the kernel with the message "unexpected IRQ trap at vector 00". The change disables compilation of a legacy driver found at arch/arm/mach-lpc32xx/irq.c, the file will be removed in a separate commit. Fixes: 76ba59f8366f ("genirq: Add irq_domain-aware core IRQ handler") Tested-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-11irqchip/gic: Ensure ordering between read of INTACK and shared dataWill Deacon2-0/+15
When an IPI is generated by a CPU, the pattern looks roughly like: <write shared data> smp_wmb(); <write to GIC to signal SGI> On the receiving CPU we rely on the fact that, once we've taken the interrupt, then the freshly written shared data must be visible to us. Put another way, the CPU isn't going to speculate taking an interrupt. Unfortunately, this assumption turns out to be broken. Consider that CPUx wants to send an IPI to CPUy, which will cause CPUy to read some shared_data. Before CPUx has done anything, a random peripheral raises an IRQ to the GIC and the IRQ line on CPUy is raised. CPUy then takes the IRQ and starts executing the entry code, heading towards gic_handle_irq. Furthermore, let's assume that a bunch of the previous interrupts handled by CPUy were SGIs, so the branch predictor kicks in and speculates that irqnr will be <16 and we're likely to head into handle_IPI. The prefetcher then grabs a speculative copy of shared_data which contains a stale value. Meanwhile, CPUx gets round to updating shared_data and asking the GIC to send an SGI to CPUy. Internally, the GIC decides that the SGI is more important than the peripheral interrupt (which hasn't yet been ACKed) but doesn't need to do anything to CPUy, because the IRQ line is already raised. CPUy then reads the ACK register on the GIC, sees the SGI value which confirms the branch prediction and we end up with a stale shared_data value. This patch fixes the problem by adding an smp_rmb() to the IPI entry code in gic_handle_irq. As it turns out, the combination of a control dependency and an ISB instruction from the EOI in the GICv3 driver is enough to provide the ordering we need, so we add a comment there justifying the absence of an explicit smp_rmb(). Cc: stable@vger.kernel.org Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-09irqchip: add nps Internal and external irqchipsNoam Camus3-0/+172
Adding EZchip NPS400 support. Internal interrupts are handled by Multi Thread Manager (MTM) Once interrupt is serviced MTM is acked for deactivating the interrupt. External interrupts are handled by MTM as well as at Global Interrupt Controller (GIC) e.g. serial and network devices. Signed-off-by: Noam Camus <noamc@ezchip.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de>
2016-05-04irqchip: Add Layerscape SCFG MSI controller supportMinghuan Lian3-0/+246
Some kind of Freescale Layerscape SoC provides a MSI implementation which uses two SCFG registers MSIIR and MSIR to support 32 MSI interrupts for each PCIe controller. The patch is to support it. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-05-03irqchip/gic-v3: Parse and export virtual GIC informationJulien Grall1-1/+113
Fill up the recently introduced gic_kvm_info with the hardware information used for virtualization. Signed-off-by: Julien Grall <julien.grall@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-03irqchip/gic-v3: Gather all ACPI specific data in a single structureJulien Grall1-27/+33
The ACPI code requires to use global variables in order to collect information from the tables. To make clear those variables are ACPI specific, gather all of them in a single structure. Furthermore, even if some of the variables are not marked with __initdata, they are all only used during the initialization. Therefore, the new variable, which hold the structure, can be marked with __initdata. Signed-off-by: Julien Grall <julien.grall@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-03irqchip/gic-v3: Prefix all pr_* messages by "GICv3: "Julien Grall1-0/+2
Currently, most of the pr_* messages in the GICv3 driver don't have a prefix. Add one to make clear where the messages come from. Signed-off-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-03irqchip/gic-v2: Parse and export virtual GIC informationJulien Grall3-1/+91
For now, the firmware tables are parsed 2 times: once in the GIC drivers, the other timer when initializing the vGIC. It means code duplication and make more tedious to add the support for another firmware table (like ACPI). Introduce a new structure and set of helpers to get/set the virtual GIC information. Also fill up the structure for GICv2. Signed-off-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-03irqchip/gic-v2: Gather ACPI specific data in a single structureJulien Grall1-4/+7
The ACPI code requires to use global variables in order to collect information from the tables. For now, a single global variable is used, but more will be added in a subsequent patch. To make clear they are ACPI specific, gather all the information in a single structure. Signed-off-by: Julien Grall <julien.grall@arm.com> Acked-by: Christofer Dall <christoffer.dall@linaro.org> Acked-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-05-02irqchip/gic-v3: Add support for partitioned PPIsMarc Zyngier2-2/+175
Plug the partitioning layer into the GICv3 PPI code, parsing the DT and building the partition affinities and providing the generic code with partition data and callbacks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Will Deacon <will.deacon@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/1460365075-7316-5-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-02irqchip: Add per-cpu interrupt partitioning libraryMarc Zyngier3-0/+260
We've unfortunately started seeing a situation where percpu interrupts are partitioned in the system: one arbitrary set of CPUs has an interrupt connected to a type of device, while another disjoint set of CPUs has the same interrupt connected to another type of device. This makes it impossible to have a device driver requesting this interrupt using the current percpu-interrupt abstraction, as the same interrupt number is now potentially claimed by at least two drivers, and we forbid interrupt sharing on per-cpu interrupt. A solution to this is to turn things upside down. Let's assume that our system describes all the possible partitions for a given interrupt, and give each of them a unique identifier. It is then possible to create a namespace where the affinity identifier itself is a form of interrupt number. At this point, it becomes easy to implement a set of partitions as a cascaded irqchip, each affinity identifier being the HW irq. This allows us to keep a number of nice properties: - Each partition results in a separate percpu-interrupt (with a restrictied affinity), which keeps drivers happy. - Because the underlying interrupt is still per-cpu, the overhead of the indirection can be kept pretty minimal. - The core code can ignore most of that crap. For that purpose, we implement a small library that deals with some of the boilerplate code, relying on platform-specific drivers to provide a description of the affinity sets and a set of callbacks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Will Deacon <will.deacon@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/1460365075-7316-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-26irqchip: versatile-fpga: add new compatible for OX810SE SoCNeil Armstrong1-0/+1
Under the OX810SE, this exact same interface is used as "Reference Peripheral Specification" Interrupt Controller, so add a new compatible string in order to support the Oxford Semiconductor OX810SE SoC interrupt controller. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-04-25irqchip/gic: Restore CPU interface checkingMarc Zyngier1-3/+2
When introducing the whole CPU feature detection framework, we lost the capability to detect a mismatched GIC configuration (using the GICv2 MMIO interface, but having the system register interface enabled). In order to solve this, use the new this_cpu_has_cap() helper. Also move the check to the CPU interface path in order to catch systems where the first CPU has been correctly configured, but the secondaries are not. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-21irqchip/mips-gic: Don't overrun pcpu_masks arrayPaul Burton1-2/+2
Commit 2a0787051182 ("irqchip/mips-gic: Use gic_vpes instead of NR_CPUS") & commit 78930f09b940 ("irqchip/mips-gic: Clear percpu_masks correctly when mapping") both introduce code which accesses gic_vpes entries in the pcpu_masks array. However, this array has length NR_CPUS. If NR_CPUS is less than gic_vpes (ie. the kernel supports use of less CPUs than are present in the system) then we overrun the array, clobber some other data & generally die pretty promptly. Most notably this affects uniprocessor kernels running on any multicore or multithreaded Malta with a GIC (ie. the vast majority of real Malta boards). Fix this by only accessing up to min(gic_vpes, NR_CPUS) entries in the pcpu_masks array, preventing the array overrun. Fixes: 2a0787051182 ("irqchip/mips-gic: Use gic_vpes instead of NR_CPUS") Fixes: 78930f09b940 ("irqchip/mips-gic: Clear percpu_masks correctly when mapping") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/1461234714-9975-1-git-send-email-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-23irqchip/mbigen: Make CONFIG_HISILICON_IRQ_MBIGEN a hidden optionMaJun1-8/+6
This config is selected by CONFIG_ARCH_HISI, so there is no point to have it user configurable. While at it move the config option to the proper place in the alphabetically sorted option list. Requested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ma Jun <majun258@huawei.com> Cc: mark.rutland@arm.com Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: Catalin.Marinas@arm.com Cc: guohanjun@huawei.com Cc: Will.Deacon@arm.com Cc: huxinwei@huawei.com Cc: lizefan@huawei.com Cc: dingtianhong@huawei.com Cc: zhaojunhua@hisilicon.com Cc: liguozhu@hisilicon.com Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1458723993-21044-3-git-send-email-majun258@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.