| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
An Open-Channel SSD can work on two modes: (i) hybrid mode, where the
L2P table is maintained both by the host and by the device; and (ii)
full host-based, where the L2P table is uniquely maintained by the host.
In the advent of a new target implementing the full host-based mode, do
not assume that the L2P table must be loaded on the generic media
manager; check device properties loaded on the identify command instead.
Signed-off-by: Javier González <javier@cnexlabs.com>
Moved into the following statement.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When the l2p table is loaded, addresses are checked for the lun they
belong to and luns are reserved accordingly. This assumes that metadata
is being stored in the backend device to recover the previous target
configuration. Since this is not yet implemented, this check collides
with some of the core initialization (e.g., sysblock initialization when
a page is formed by several sectors).
We take this check out and for now rely on that the right target will be
created instead. When metadata is stored to recover a target, this check
will come natural as part of the recovery strategy.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Add a bitmap of luns to indicate the status
of luns: inuse/available. When create targets
do the necessary check to avoid allocating luns
that are already allocated.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Freed dev->lun_map if nvm_core_init later failed in the init process.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
We can create more than one target on a lightnvm
device by specifying its begin lun and end lun.
But only specify the physical address area is not
enough, we need to get the corresponding non-
intersection logical address area division from
the backend device's logcial address space.
Otherwise the targets on the device might use
the same logical addresses cause incorrect
information in the device's l2p table.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Pull block driver updates from Jens Axboe:
"This is the block driver pull request for this merge window. It sits
on top of for-4.6/core, that was just sent out.
This contains:
- A set of fixes for lightnvm. One from Alan, fixing an overflow,
and the rest from the usual suspects, Javier and Matias.
- A set of fixes for nbd from Markus and Dan, and a fixup from Arnd
for correct usage of the signed 64-bit divider.
- A set of bug fixes for the Micron mtip32xx, from Asai.
- A fix for the brd discard handling from Bart.
- Update the maintainers entry for cciss, since that hardware has
transferred ownership.
- Three bug fixes for bcache from Eric Wheeler.
- Set of fixes for xen-blk{back,front} from Jan and Konrad.
- Removal of the cpqarray driver. It has been disabled in Kconfig
since 2013, and we were initially scheduled to remove it in 3.15.
- Various updates and fixes for NVMe, with the most important being:
- Removal of the per-device NVMe thread, replacing that with a
watchdog timer instead. From Christoph.
- Exposing the namespace WWID through sysfs, from Keith.
- Set of cleanups from Ming Lin.
- Logging the controller device name instead of the underlying
PCI device name, from Sagi.
- And a bunch of fixes and optimizations from the usual suspects
in this area"
* 'for-4.6/drivers' of git://git.kernel.dk/linux-block: (49 commits)
NVMe: Expose ns wwid through single sysfs entry
drivers:block: cpqarray clean up
brd: Fix discard request processing
cpqarray: remove it from the kernel
cciss: update MAINTAINERS
NVMe: Remove unused sq_head read in completion path
bcache: fix cache_set_flush() NULL pointer dereference on OOM
bcache: cleaned up error handling around register_cache()
bcache: fix race of writeback thread starting before complete initialization
NVMe: Create discard zero quirk white list
nbd: use correct div_s64 helper
mtip32xx: remove unneeded variable in mtip_cmd_timeout()
lightnvm: generalize rrpc ppa calculations
lightnvm: remove struct nvm_dev->total_blocks
lightnvm: rename ->nr_pages to ->nr_sects
lightnvm: update closed list outside of intr context
xen/blback: Fit the important information of the thread in 17 characters
lightnvm: fold get bb tbl when using dual/quad plane mode
lightnvm: fix up nonsensical configure overrun checking
xen-blkback: advertise indirect segment support earlier
...
|
|
In rrpc, some calculations assume a certain configuration (e.g., 1 LUN,
1 sector per page). The reason behind this was that LightNVM used a
simple configuration with QEMU to test core features in the beginning.
This patch relaxes these assumptions and generalizes calculation,
allowing multiple luns to be used.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The struct nvm_dev->total_blocks was only used for calculating total
sectors. Remove and instead calculate total sectors from the number of
luns and its sectors.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The struct rrpc->nr_pages can easily be interpreted as the number of
flash pages allocated to rrpc, while it is the nr_sects. Make sure that
this is reflected from the variable name.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When an I/O finishes, full blocks are moved from the open to the closed
list - a lock is taken to protect the list. This happens at the moment
in the interrupt context, which is not correct.
This patch moves this logic to the block workqueue instead, avoiding
holding a spinlock without interrupt save in an interrupt context.
Signed-off-by: Javier González <javier@cnexlabs.com>
Fixes: ff0e498bfa18 ("lightnvm: manage open and closed blocks sepa...")
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When the media manager runs in dual or quad plane mode, lightnvm
abstracts away plane specific commands. This poses a problem for
get bad block table, as it reports bad blocks per plane, making the
table either two or four times bigger than expected. Fold the bad block
list before returning.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Instead of checking a constant 0 actually check the space available. Even
better remember to allow for the header and also check the right amount of
space is needed.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
System block allows the device to initialize with its configured media
manager. The system blocks is written to disk, and read again when media
manager is determined. For this to work, the backend must store the
data. Device drivers, such as null_blk, does not have any backend
storage. This patch allows the media manager to be initialized without a
storage backend.
It also fix incorrect configuration of capabilities in null_blk, as it
does not support get/set bad block interface.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This patch fixes an error on the calculation of intersecting logical
addresses; it contemplates the case where a new request including
several addresses intersects with a single locked address. This case is
typical when multiple pages are sent in a new request, while GC - which
at the moment sends one address at the time - is running.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Add a warning if irqs are disabled when locking a new address in rrpc.
The typical path to a new request does not disable irqs, but this is not
guaranteed in the future.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The bio is not returned if the data page cannot be allocated.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Now that a device can be managed using the system blocks, a method to
reset the device is necessary as well. This patch introduces logic to
reset the device easily to factory state and exposes it through an
ioctl.
The ioctl takes the following flags:
NVM_FACTORY_ERASE_ONLY_USER
By default all blocks, except host-reserved blocks are erased upon
factory reset. Instead of this, only erase host-reserved blocks.
NVM_FACTORY_RESET_HOST_BLKS
Mark host-reserved blocks to be erased and set their type to free.
NVM_FACTORY_RESET_GRWN_BBLKS
Mark "grown bad blocks" to be erased and set their type to free.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Use system block information to register the appropriate media manager.
This enables the LightNVM subsystem to instantiate a media manager
selected by the user, instead of relying on automatic detection by each
media manager loaded in the kernel.
A device must now be initialized before it can proceed to initialize its
media manager. Upon initialization, the configured media manager is
automatically initialized as well.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Based on the previous patch, we now introduce an ioctl to initialize the
device using nvm_init_sysblock and create the necessary system blocks.
The user may specify the media manager that they wish to instantiate on
top. Default from user-space will be "gennvm".
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
An Open-Channel SSD shall be initialized before use. To initialize, we
define an on-disk format, that keeps a small set of metadata to bring up
the media manager on top of the device.
The initial step is introduced to allow a user to format the disks for a
given media manager. During format, a system block is stored on one to
three separate luns on the device. Each lun has the system block
duplicated. During initialization, the system block can be retrieved and
the appropriate media manager can initialized.
The on-disk format currently covers (struct nvm_system_block):
- Magic value "NVMS".
- Monotonic increasing sequence number.
- The physical block erase count.
- Version of the system block format.
- Media manager type.
- Media manager superblock physical address.
The interface provides three functions to manage the system block:
int nvm_init_sysblock(struct nvm_dev *, struct nvm_sb_info *)
int nvm_get_sysblock(struct nvm *dev, struct nvm_sb_info *)
int nvm_update_sysblock(struct nvm *dev, struct nvm_sb_info *)
Each implement a part of the logic to manage the system block. The
initialization creates the first system blocks and mark them on the
device. Get retrieves the latest system block by scanning all pages in
the associated system blocks. The update sysblock writes new metadata
and allocates new block if necessary.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
NAND MLC memories have both lower and upper pages. When programming,
both of these must be written, before data can be read. However,
these lower and upper pages might not placed at even and odd flash
pages, but can be skipped. Therefore each flash memory has its lower
pages defined, which can then be used when programming and to know when
padding are necessary.
This patch implements the lower page definition in the specification,
and exposes it through a simple lookup table at dev->lptbl.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Some flash media has extended capabilities, such as programming SLC
pages on MLC/TLC flash, erase/program suspend, scramble and encryption.
MCCAP is introduced to detect support for these capabilities in the
command set.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
LightNVM targets need to know the state of the flash block when doing
flash optimizations. An example is implementing a write buffer to
respect the flash page size. Currently, block state is not accounted
for; the media manager only differentiates among free, bad and in-use
blocks.
This patch adds the logic in the generic media manager to enable
targets manage blocks into open and close separately, and it implements
such management in rrpc. It also adds a set of flags to describe the
state of the block (open, closed, free, bad).
In order to avoid taking two locks (nvm_lun and rrpc_lun) consecutively,
we introduce lockless get_/put_block primitives so that the open and
close list locks and future common logic is handled within the nvm_lun
lock.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Currently, a rrpc block only points to its nvm_lun. If a user wants to
find the associated rrpc lun, it will have to calculate the index and
look it up manually. By referencing the rrpc lun directly, this step can
be omitted, at the cost of a larger memory footprint.
This is important for upcoming patches that implement write buffering in
rrpc.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Internal logic for both core and media managers, does not have a
backing bio for issuing I/Os. Introduce nvm_submit_ppa to allow raw
I/Os to be submitted to the underlying device driver.
The function request the device, ppa, data buffer and its length and
will submit the I/O synchronously to the device. The return value may
therefore be used to detect any errors regarding the issued I/O.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Instead of passing request error into the LightNVM modules, incorporate
it into the nvm_rq.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Sometimes a user want to erase multiple PPAs at the same time. Extend
nvm_erase_ppa to take multiple ppas and number of ppas to be erased.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
There is no need to check whether dev's pages per block is
beyond rrpc support every time we init a lun, we only need
to check it once before enter the lun init loop.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The Westlake controller requires that the PPA list has sectors defined
sequentially. Currently, the PPA list is created with planes first, then
sectors. Change this to sectors first, then planes.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This patch fix two issues in rrpc_lun_gc
1. prio_list is protected by rrpc_lun's lock not nvm_lun's, so
acquire rlun's lock instead of lun's before operate on the list.
2. we delete block from prio_list before allocating gcb, but gcb
allocation may fail, we end without putting it back to the list,
this makes the block won't get reclaimed in the future. To solve
this issue, delete block after gcb allocation.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
We delete a block from the gc list before reclaim it, so
put it back to the list on its reclaim fail, otherwise
this block will not get reclaimed and be programmable
in the future.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
We should check last io completion status before
starting another one.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
To implement sync I/O support within the LightNVM core, the end_io
functions are refactored to take an end_io function pointer instead of
testing for initialized media manager, followed by calling its end_io
function.
Sync I/O can then be implemented using a callback that signal I/O
completion. This is similar to the logic found in blk_to_execute_io().
By implementing it this way, the underlying device I/Os submission logic
is abstracted away from core, targets, and media managers.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
A device may be driven in single, double or quad plane mode. In that
case, the rqd must have either one, two, or four PPAs set for a single
PPA sent to the device. Refactor this logic into their own
functions to be shared by program/erase/read in the core.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
A device may function in single, dual or quad plane mode. The gennvm
media manager manages this with explicit helpers. They convert a single
ppa to 1, 2 or 4 separate ppas in a ppa list. To aid implementation of
recovery and system blocks, this functionality can be moved directly
into the core.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When rrpc_write_ppalist_rq and rrpc_read_ppalist_rq succeed, we setup
rq correctly, but nvm_submit_io may afterward fail since it cannot
allocate request or nvme_nvm_command, we return error but forget to
cleanup the previous work.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The mempool allocation might fail. Make sure to return error when it
does, instead of causing a kernel panic.
Signed-off-by: Javier Gonzalez <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When initing bad block list in gennvm_block_bb, once we move bad block
from free_list to bb_list, we should maintain both stat info
nr_free_blocks and nr_bad_blocks. So this patch fixes to add missing
operation related to nr_free_blocks.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Put bio when submission fails, since we get it
before submission. And return error when backend
device driver doesn't provide a submit_io method,
thus we can end IO properly.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
dev->nr_luns reports the total number of luns available in a device
while dev->luns_per_chnl is the number of luns per channel.
When multiple channels are available, the offset is calculated from a
channel and lun id into a linear array. As it multiplies with
the total number of luns, we go out of bound when channel id > 0 and
causes the kernel to panic when we read a protected kernel memory area.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The LightNVM module exposes a debug interface when CONFIG_NVM_DEBUG is
set. This interfaces takes a string to configure media managers and
targets. Make sure this interface is only exposed when chosen
deliberately.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
After the gennvm module has been initialized. It might be attached to
one or several devices. In that case, the module is in use. Make sure
that it can not be unloaded.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This patch fixes two issues during media manager registration.
1. The ppa pool can be used at media manager registration. Allocate the
ppa pool before that.
2. If a media manager can't be found, this should not lead to the
device being unallocated. A media manager can be registered later, that
can manage the device. Only warn if a media manager fails
initialization.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
In the case where a request queue is passed to the low lever lightnvm
device drive integration, the device driver might pass its admin
commands through another queue. Instead pass nvm_dev, and let the
low level drive the appropriate queue.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The spin_unlock is duplicated multiple times. Jump to a single unlock
to improve the code flow.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Put the allocated blocks back to the free list
when the luns configure failed, to make these
blocks useable to others.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
rrpc_get_blk use constant 0 as the input parameter
of nvm_get_blk, this may result in getting gc block
failed unexpectedly.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
To avoid race conditions, traverse dev, media manager,
and target lists and also register, unregister entries
to/from them, should be always under the nvm_lock control.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The get_bb_tbl function takes ppa as a generic address, which is
converted to the ppa device address within the device driver. When
the update_bbtbl callback is called from get_bb_tbl, the device
specific ppa is used, instead of the generic ppa.
Make sure to pass the generic ppa.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
do device max_phys_sect boundary check first, otherwise
we will allocate dma_pools for devices whose max sectors
are beyond lightnvm support and register them.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
If copy_to_user() fails we returned error but we missed releasing
devices.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
Javier González
Wenwei Tao
Linus Torvalds
Javier González
Matias Bjørling
Alan
Javier González
Chao Yu
Sudip Mukherjee