aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/md/dm-verity-target.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-08-23dm verity: add root hash pkcs#7 signature verificationJaskaran Khurana1-5/+38
The verification is to support cases where the root hash is not secured by Trusted Boot, UEFI Secureboot or similar technologies. One of the use cases for this is for dm-verity volumes mounted after boot, the root hash provided during the creation of the dm-verity volume has to be secure and thus in-kernel validation implemented here will be used before we trust the root hash and allow the block device to be created. The signature being provided for verification must verify the root hash and must be trusted by the builtin keyring for verification to succeed. The hash is added as a key of type "user" and the description is passed to the kernel so it can look it up and use it for verification. Adds CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG which can be turned on if root hash verification is needed. Kernel commandline dm_verity module parameter 'require_signatures' will indicate whether to force root hash signature verification (for all dm verity volumes). Signed-off-by: Jaskaran Khurana <jaskarankhurana@linux.microsoft.com> Tested-and-Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-06-25dm verity: use message limit for data block corruption messageMilan Broz1-2/+2
DM verity should also use DMERR_LIMIT to limit repeat data block corruption messages. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428Thomas Gleixner1-2/+1
Based on 1 normalized pattern(s): this file is released under the gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 68 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-18dm verity: log the hash algorithm implementationEric Biggers1-0/+9
Log the hash algorithm's driver name when a dm-verity target is created. This will help people determine whether the expected implementation is being used. It can make an enormous difference; e.g., SHA-256 on ARM can be 8x faster with the crypto extensions than without. It can also be useful to know if an implementation using an external crypto accelerator is being used instead of a software implementation. Example message: [ 35.281945] device-mapper: verity: sha256 using implementation "sha256-ce" We've already found the similar message in fs/crypto/keyinfo.c to be very useful. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-09-04dm verity: fix crash on bufio buffer that was allocated with vmallocMikulas Patocka1-4/+20
Since commit d1ac3ff008fb ("dm verity: switch to using asynchronous hash crypto API") dm-verity uses asynchronous crypto calls for verification, so that it can use hardware with asynchronous processing of crypto operations. These asynchronous calls don't support vmalloc memory, but the buffer data can be allocated with vmalloc if dm-bufio is short of memory and uses a reserved buffer that was preallocated in dm_bufio_client_create(). Fix verity_hash_update() so that it deals with vmalloc'd memory correctly. Reported-by: "Xiao, Jin" <jin.xiao@intel.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: d1ac3ff008fb ("dm verity: switch to using asynchronous hash crypto API") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-06-12treewide: kvzalloc() -> kvcalloc()Kees Cook1-2/+3
The kvzalloc() function has a 2-factor argument form, kvcalloc(). This patch replaces cases of: kvzalloc(a * b, gfp) with: kvcalloc(a * b, gfp) as well as handling cases of: kvzalloc(a * b * c, gfp) with: kvzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvcalloc(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvzalloc( - sizeof(char) * COUNT + COUNT , ...) | kvzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvzalloc + kvcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvzalloc(C1 * C2 * C3, ...) | kvzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvzalloc(sizeof(THING) * C2, ...) | kvzalloc(sizeof(TYPE) * C2, ...) | kvzalloc(C1 * C2 * C3, ...) | kvzalloc(C1 * C2, ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvzalloc + kvcalloc ( - (E1) * E2 + E1, E2 , ...) | - kvzalloc + kvcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kvzalloc + kvcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-04dm: remove fmode_t argument from .prepare_ioctl hookMike Snitzer1-2/+1
Use the fmode_t that is passed to dm_blk_ioctl() rather than inconsistently (varies across targets) drop it on the floor by overriding it with the fmode_t stored in 'struct dm_dev'. All the persistent reservation functions weren't using the fmode_t they got back from .prepare_ioctl so remove them. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-04dm verity: make verity_for_io_block staticweiyongjun (A)1-2/+2
Fixes the following sparse warning: drivers/md/dm-verity-target.c:375:6: warning: symbol 'verity_for_io_block' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-04-03dm verity: add 'check_at_most_once' option to only validate hashes oncePatrik Torstensson1-5/+59
This allows platforms that are CPU/memory contrained to verify data blocks only the first time they are read from the data device, rather than every time. As such, it provides a reduced level of security because only offline tampering of the data device's content will be detected, not online tampering. Hash blocks are still verified each time they are read from the hash device, since verification of hash blocks is less performance critical than data blocks, and a hash block will not be verified any more after all the data blocks it covers have been verified anyway. This option introduces a bitset that is used to check if a block has been validated before or not. A block can be validated more than once as there is no thread protection for the bitset. These changes were developed and tested on entry-level Android Go devices. Signed-off-by: Patrik Torstensson <totte@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-14Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-61/+20
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...
2017-11-03dm: move dm-verity to generic async completionGilad Ben-Yossef1-61/+20
dm-verity is starting async. crypto ops and waiting for them to complete. Move it over to generic code doing the same. This also avoids a future potential data coruption bug created by the use of wait_for_completion_interruptible() without dealing correctly with an interrupt aborting the wait prior to the async op finishing, should this code ever move to a context where signals are not masked. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> CC: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()Mark Rutland1-1/+1
Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-14Merge tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds1-1/+1
Pull device mapper updates from Mike Snitzer: - Some request-based DM core and DM multipath fixes and cleanups - Constify a few variables in DM core and DM integrity - Add bufio optimization and checksum failure accounting to DM integrity - Fix DM integrity to avoid checking integrity of failed reads - Fix DM integrity to use init_completion - A couple DM log-writes target fixes - Simplify DAX flushing by eliminating the unnecessary flush abstraction that was stood up for DM's use. * tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dax: remove the pmem_dax_ops->flush abstraction dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK dm integrity: make blk_integrity_profile structure const dm integrity: do not check integrity for failed read operations dm log writes: fix >512b sectorsize support dm log writes: don't use all the cpu while waiting to log blocks dm ioctl: constify ioctl lookup table dm: constify argument arrays dm integrity: count and display checksum failures dm integrity: optimize writing dm-bufio buffers that are partially changed dm rq: do not update rq partially in each ending bio dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior dm mpath: complain about unsupported __multipath_map_bio() return values dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through
2017-08-28dm: constify argument arraysEric Biggers1-1/+1
The arrays of 'struct dm_arg' are never modified by the device-mapper core, so constify them so that they are placed in .rodata. (Exception: the args array in dm-raid cannot be constified because it is allocated on the stack and modified.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-08-23block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig1-1/+1
This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-12Merge tag 'v4.12-rc5' into for-4.13/blockJens Axboe1-2/+2
We've already got a few conflicts and upcoming work depends on some of the changes that have gone into mainline as regression fixes for this series. Pull in 4.12-rc5 to resolve these conflicts and make it easier on down stream trees to continue working on 4.13 changes. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-09block: switch bios to blk_status_tChristoph Hellwig1-5/+5
Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09dm: don't return errnos from ->mapChristoph Hellwig1-3/+3
Instead use the special DM_MAPIO_KILL return value to return -EIO just like we do for the request based path. Note that dm-log-writes returned -ENOMEM in a few places, which now becomes -EIO instead. No consumer treats -ENOMEM special so this shouldn't be an issue (and it should use a mempool to start with to make guaranteed progress). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-22dm verity: fix no salt use caseGilad Ben-Yossef1-2/+2
DM-Verity has an (undocumented) mode where no salt is used. This was never handled directly by the DM-Verity code, instead working due to the fact that calling crypto_shash_update() with a zero length data is an implicit noop. This is no longer the case now that we have switched to crypto_ahash_update(). Fix the issue by introducing explicit handling of the no salt use case to DM-Verity. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Reported-by: Marian Csontos <mcsontos@redhat.com> Fixes: d1ac3ff ("dm verity: switch to using asynchronous hash crypto API") Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24dm verity: switch to using asynchronous hash crypto APIGilad Ben-Yossef1-60/+141
Use of the synchronous digest API limits dm-verity to using pure CPU based algorithm providers and rules out the use of off CPU algorithm providers which are normally asynchronous by nature, potentially freeing CPU cycles. This can reduce performance per Watt in situations such as during boot time when a lot of concurrent file accesses are made to the protected volume. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> CC: Eric Biggers <ebiggers3@gmail.com> CC: Ondrej Mosnáček <omosnacek+linux-crypto@gmail.com> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21dm verity: fix incorrect error messageEric Biggers1-1/+1
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-02-22dm: rename target's per_bio_data_size to per_io_data_sizeMike Snitzer1-6/+6
Request-based DM will also make use of per_bio_data_size. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-12-10dm verity: add ignore_zero_blocks featureSami Tolvanen1-8/+79
If ignore_zero_blocks is enabled dm-verity will return zeroes for blocks matching a zero hash without validating the content. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-12-10dm verity: add support for forward error correctionSami Tolvanen1-7/+48
Add support for correcting corrupted blocks using Reed-Solomon. This code uses RS(255, N) interleaved across data and hash blocks. Each error-correcting block covers N bytes evenly distributed across the combined total data, so that each byte is a maximum distance away from the others. This makes it possible to recover from several consecutive corrupted blocks with relatively small space overhead. In addition, using verity hashes to locate erasures nearly doubles the effectiveness of error correction. Being able to detect corrupted blocks also improves performance, because only corrupted blocks need to corrected. For a 2 GiB partition, RS(255, 253) (two parity bytes for each 253-byte block) can correct up to 16 MiB of consecutive corrupted blocks if erasures can be located, and 8 MiB if they cannot, with 16 MiB space overhead. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-12-10dm verity: factor out verity_for_bv_block()Sami Tolvanen1-23/+49
verity_for_bv_block() will be re-used by optional dm-verity object. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-12-10dm verity: factor out structures and functions useful to separate objectSami Tolvanen1-100/+16
Prepare for an optional verity object to make use of existing dm-verity structures and functions. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-12-10dm verity: move dm-verity.c to dm-verity-target.cSami Tolvanen1-0/+1039
Prepare for extending dm-verity with an optional object. Follows the naming convention used by other DM targets (e.g. dm-cache and dm-era). Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.