aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/md/md-cluster.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 45Thomas Gleixner1-6/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 11 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170858.370933192@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18md-cluster: remove suspend_infoGuoqing Jiang1-71/+32
Previously, we allow multiple nodes can resync device, but we had changed it to only support one node can do resync at one time, but suspend_info is still used. Now, let's remove the structure and use suspend_lo/hi to record the range. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18md-cluster: send BITMAP_NEEDS_SYNC message if reshaping is interruptedGuoqing Jiang1-3/+16
We need to continue the reshaping if it was interrupted in original node. So original node should call resync_bitmap in case reshaping is aborted. Then BITMAP_NEEDS_SYNC message is broadcasted to other nodes, node which continues the reshaping should restart reshape from mddev->reshape_position instead of from the first beginning. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18md-cluster/bitmap: don't call md_bitmap_sync_with_cluster during reshaping stageGuoqing Jiang1-7/+20
When reshape is happening in one node, other nodes could receive lots of RESYNCING messages, so md_bitmap_sync_with_cluster is called. Since the resyncing window is typically small in these RESYNCING messages, so WARN is always triggered, so we should not call the func when reshape is happening. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18md-cluster: introduce resync_info_get interface for sanity checkGuoqing Jiang1-0/+14
Since the resync region from suspend_info means one node is reshaping this area, so the position of reshape_progress should be included in the area. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-10-18md-cluster/raid10: resize all the bitmaps before start reshapeGuoqing Jiang1-0/+81
To support add disk under grow mode, we need to resize all the bitmaps of each node before reshape, so that we can ensure all nodes have the same view of the bitmap of the clustered raid. So after the master node resized the bitmap, it broadcast a message to other slave nodes, and it checks the size of each bitmap are same or not by compare pages. We can only continue the reshaping after all nodes update the bitmap to the same size (by checking the pages), otherwise revert bitmap size to previous value. The resize_bitmaps interface and BITMAP_RESIZE message are introduced in md-cluster.c for the purpose. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-08-31md-cluster: release RESYNC lock after the last resync messageGuoqing Jiang1-5/+5
All the RESYNC messages are sent with resync lock held, the only exception is resync_finish which releases resync_lockres before send the last resync message, this should be changed as well. Otherwise, we can see deadlock issue as follows: clustermd2-gqjiang2:~ # cat /proc/mdstat Personalities : [raid10] [raid1] md0 : active raid1 sdg[0] sdf[1] 134144 blocks super 1.2 [2/2] [UU] [===================>.] resync = 99.6% (134144/134144) finish=0.0min speed=26K/sec bitmap: 1/1 pages [4KB], 65536KB chunk unused devices: <none> clustermd2-gqjiang2:~ # ps aux|grep md|grep D root 20497 0.0 0.0 0 0 ? D 16:00 0:00 [md0_raid1] clustermd2-gqjiang2:~ # cat /proc/20497/stack [<ffffffffc05ff51e>] dlm_lock_sync+0x8e/0xc0 [md_cluster] [<ffffffffc05ff7e8>] __sendmsg+0x98/0x130 [md_cluster] [<ffffffffc05ff900>] sendmsg+0x20/0x30 [md_cluster] [<ffffffffc05ffc35>] resync_info_update+0xb5/0xc0 [md_cluster] [<ffffffffc0593e84>] md_reap_sync_thread+0x134/0x170 [md_mod] [<ffffffffc059514c>] md_check_recovery+0x28c/0x510 [md_mod] [<ffffffffc060c882>] raid1d+0x42/0x800 [raid1] [<ffffffffc058ab61>] md_thread+0x121/0x150 [md_mod] [<ffffffff9a0a5b3f>] kthread+0xff/0x140 [<ffffffff9a800235>] ret_from_fork+0x35/0x40 [<ffffffffffffffff>] 0xffffffffffffffff clustermd-gqjiang1:~ # ps aux|grep md|grep D root 20531 0.0 0.0 0 0 ? D 16:00 0:00 [md0_raid1] root 20537 0.0 0.0 0 0 ? D 16:00 0:00 [md0_cluster_rec] root 20676 0.0 0.0 0 0 ? D 16:01 0:00 [md0_resync] clustermd-gqjiang1:~ # cat /proc/mdstat Personalities : [raid10] [raid1] md0 : active raid1 sdf[1] sdg[0] 134144 blocks super 1.2 [2/2] [UU] [===================>.] resync = 97.3% (131072/134144) finish=8076.8min speed=0K/sec bitmap: 1/1 pages [4KB], 65536KB chunk unused devices: <none> clustermd-gqjiang1:~ # cat /proc/20531/stack [<ffffffffc080974d>] metadata_update_start+0xcd/0xd0 [md_cluster] [<ffffffffc079c897>] md_update_sb.part.61+0x97/0x820 [md_mod] [<ffffffffc079f15b>] md_check_recovery+0x29b/0x510 [md_mod] [<ffffffffc0816882>] raid1d+0x42/0x800 [raid1] [<ffffffffc0794b61>] md_thread+0x121/0x150 [md_mod] [<ffffffff9e0a5b3f>] kthread+0xff/0x140 [<ffffffff9e800235>] ret_from_fork+0x35/0x40 [<ffffffffffffffff>] 0xffffffffffffffff clustermd-gqjiang1:~ # cat /proc/20537/stack [<ffffffffc0813222>] freeze_array+0xf2/0x140 [raid1] [<ffffffffc080a56e>] recv_daemon+0x41e/0x580 [md_cluster] [<ffffffffc0794b61>] md_thread+0x121/0x150 [md_mod] [<ffffffff9e0a5b3f>] kthread+0xff/0x140 [<ffffffff9e800235>] ret_from_fork+0x35/0x40 [<ffffffffffffffff>] 0xffffffffffffffff clustermd-gqjiang1:~ # cat /proc/20676/stack [<ffffffffc080951e>] dlm_lock_sync+0x8e/0xc0 [md_cluster] [<ffffffffc080957f>] lock_token+0x2f/0xa0 [md_cluster] [<ffffffffc0809622>] lock_comm+0x32/0x90 [md_cluster] [<ffffffffc08098f5>] sendmsg+0x15/0x30 [md_cluster] [<ffffffffc0809c0a>] resync_info_update+0x8a/0xc0 [md_cluster] [<ffffffffc08130ba>] raid1_sync_request+0xa9a/0xb10 [raid1] [<ffffffffc079b8ea>] md_do_sync+0xbaa/0xf90 [md_mod] [<ffffffffc0794b61>] md_thread+0x121/0x150 [md_mod] [<ffffffff9e0a5b3f>] kthread+0xff/0x140 [<ffffffff9e800235>] ret_from_fork+0x35/0x40 [<ffffffffffffffff>] 0xffffffffffffffff Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-08-18Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-10/+8
Pull input updates from Dmitry Torokhov: - a new driver for Rohm BU21029 touch controller - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free - updates to Atmel, eeti. pxrc and iforce drivers - assorted driver cleanups and fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) MAINTAINERS: Add PhoenixRC Flight Controller Adapter Input: do not use WARN() in input_alloc_absinfo() Input: mark expected switch fall-throughs Input: raydium_i2c_ts - use true and false for boolean values Input: evdev - switch to bitmap API Input: gpio-keys - switch to bitmap_zalloc() Input: elan_i2c_smbus - cast sizeof to int for comparison bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free() md: Avoid namespace collision with bitmap API dm: Avoid namespace collision with bitmap API Input: pm8941-pwrkey - add resin entry Input: pm8941-pwrkey - abstract register offsets and event code Input: iforce - reorganize joystick configuration lists Input: atmel_mxt_ts - move completion to after config crc is updated Input: atmel_mxt_ts - don't report zero pressure from T9 Input: atmel_mxt_ts - zero terminate config firmware file Input: atmel_mxt_ts - refactor config update code to add context struct Input: atmel_mxt_ts - config CRC may start at T71 Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE ...
2018-08-01md: Avoid namespace collision with bitmap APIAndy Shevchenko1-10/+8
bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-05md-cluster: don't send msg if array is closingGuoqing Jiang1-1/+9
If we close an array which resync thread is running, then we don't need the node to send msg since another node would launch the resync thread to continue the rest works. Also send a message is time consuming, we should avoid it. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-07-05md-cluster: show array's status more accurateGuoqing Jiang1-2/+16
When resync or recovery is happening in one node, other nodes don't show the appropriate info now. For example, when create an array in master node without "--assume-clean", then assemble the array in slave nodes, you can see "resync=PENDING" when read /proc/mdstat in slave nodes. However, the info is confusing since "PENDING" status is introduced for start array in read-only mode. We introduce RESYNCING_REMOTE flag to indicate that resync thread is running in remote node. The flags is set when node receive RESYNCING msg. And we clear the REMOTE flag in following cases: 1. resync or recover is finished in master node, which means slaves receive msg with both lo and hi are set to 0. 2. node continues resync/recovery in recover_bitmaps. 3. when resync_finish is called. Then we show accurate information in status_resync by check REMOTE flags and with other conditions. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-07-05md-cluster: clear another node's suspend_area after the copy is finishedGuoqing Jiang1-9/+10
When one node leaves cluster or stops the resyncing (resync or recovery) array, then other nodes need to call recover_bitmaps to continue the unfinished task. But we need to clear suspend_area later after other nodes copy the resync information to their bitmap (by call bitmap_copy_from_slot). Otherwise, all nodes could write to the suspend_area even the suspend_area is not handled by any node, because area_resyncing returns 0 at the beginning of raid1_write_request. Which means one node could write suspend_area while another node is resyncing the same area, then data could be inconsistent. So let's clear suspend_area later to avoid above issue with the protection of bm lock. Also it is straightforward to clear suspend_area after nodes have copied the resync info to bitmap. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-3/+3
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-01md-cluster: update document for raid10Guoqing Jiang1-1/+1
Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01md: remove special meaning of ->quiesce(.., 2)NeilBrown1-3/+3
The '2' argument means "wake up anything that is waiting". This is an inelegant part of the design and was added to help support management of suspend_lo/suspend_hi setting. Now that suspend_lo/hi is managed in mddev_suspend/resume, that need is gone. These is still a couple of places where we call 'quiesce' with an argument of '2', but they can safely be changed to call ->quiesce(.., 1); ->quiesce(.., 0) which achieve the same result at the small cost of pausing IO briefly. This removes a small "optimization" from suspend_{hi,lo}_store, but it isn't clear that optimization served a useful purpose. The code now is a lot clearer. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-16md: rename some drivers/md/ files to have an "md-" prefixMike Snitzer1-1/+1
Motivated by the desire to illiminate the imprecise nature of DM-specific patches being unnecessarily sent to both the MD maintainer and mailing-list. Which is born out of the fact that DM files also reside in drivers/md/ Now all MD-specific files in drivers/md/ start with either "raid" or "md-" and the MAINTAINERS file has been updated accordingly. Shaohua: don't change module name Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-16md-cluster: make function cluster_check_sync_size staticColin Ian King1-1/+1
The function cluster_check_sync_size is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'cluster_check_sync_size' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-05-21md-cluster: fix potential lock issue in add_new_diskGuoqing Jiang1-1/+3
The add_new_disk returns with communication locked if __sendmsg returns failure, fix it with call unlock_comm before return. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> CC: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-04-14md-cluster: Fix a memleak in an error handling pathChristophe JAILLET1-1/+1
We know that 'bm_lockres' is NULL here, so 'lockres_free(bm_lockres)' is a no-op. According to resource handling in case of error a few lines below, it is likely that 'bitmap_free(bitmap)' was expected instead. Fixes: b98938d16a10 ("md-cluster: introduce cluster_check_sync_size") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-16md-cluster: add the support for resizeGuoqing Jiang1-0/+76
To update size for cluster raid, we need to make sure all nodes can perform the change successfully. However, it is possible that some of them can't do it due to failure (bitmap_resize could fail). So we need to consider the issue before we set the capacity unconditionally, and we use below steps to perform sanity check. 1. A change the size, then broadcast METADATA_UPDATED msg. 2. B and C receive METADATA_UPDATED change the size excepts call set_capacity, sync_size is not update if the change failed. Also call bitmap_update_sb to sync sb to disk. 3. A checks other node's sync_size, if sync_size has been updated in all nodes, then send CHANGE_CAPACITY msg otherwise send msg to revert previous change. 4. B and C call set_capacity if receive CHANGE_CAPACITY msg, otherwise pers->resize will be called to restore the old value. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-16md-cluster: introduce cluster_check_sync_sizeGuoqing Jiang1-0/+60
Support resize is a little complex for clustered raid, since we need to ensure all the nodes share the same knowledge about the size of raid. We achieve the goal by check the sync_size which is in each node's bitmap, we can only change the capacity after cluster_check_sync_size returns 0. Also, get_bitmap_from_slot is added to get a slot's bitmap. And we exported some funcs since they are used in cluster_check_sync_size(). We can also reuse get_bitmap_from_slot to remove redundant code existed in bitmap_copy_from_slot. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-16md-cluster: add CHANGE_CAPACITY message typeGuoqing Jiang1-0/+5
The msg type CHANGE_CAPACITY is introduced to support resize clustered raid in later patch, and it is sent after all the nodes have the same sync_size, receiver node just need to set new capacity once received this msg. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-16md-cluster: use sync way to handle METADATA_UPDATED msgGuoqing Jiang1-16/+66
Previously, when node received METADATA_UPDATED msg, it just need to wakeup mddev->thread, then md_reload_sb will be called eventually. We taken the asynchronous way to avoid a deadlock issue, the deadlock issue could happen when one node is receiving the METADATA_UPDATED msg (wants reconfig_mutex) and trying to run the path: md_check_recovery -> mddev_trylock(hold reconfig_mutex) -> md_update_sb-metadata_update_start (want EX on token however token is got by the sending node) Since we will support resizing for clustered raid, and we need the metadata update handling to be synchronous so that the initiating node can detect failure, so we need to change the way for handling METADATA_UPDATED msg. But, we obviously need to avoid above deadlock with the sync way. To make this happen, we considered to not hold reconfig_mutex to call md_reload_sb, if some other thread has already taken reconfig_mutex and waiting for the 'token', then process_recvd_msg() can safely call md_reload_sb() without taking the mutex. This is because we can be certain that no other thread will take the mutex, and we also certain that the actions performed by md_reload_sb() won't interfere with anything that the other thread is in the middle of. To make this more concrete, we added a new cinfo->state bit MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD Which is set in lock_token() just before dlm_lock_sync() is called, and cleared just after. As lock_token() is always called with reconfig_mutex() held (the specific case is the resync_info_update which is distinguished well in previous patch), if process_recvd_msg() finds that the new bit is set, then the mutex must be held by some other thread, and it will keep waiting. So process_metadata_update() can call md_reload_sb() if either mddev_trylock() succeeds, or if MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is set. The tricky bit is what to do if neither of these apply. We need to wait. Fortunately mddev_unlock() always calls wake_up() on mddev->thread->wqueue. So we can get lock_token() to call wake_up() on that when it sets the bit. There are also some related changes inside this commit: 1. remove RELOAD_SB related codes since there are not valid anymore. 2. mddev is added into md_cluster_info then we can get mddev inside lock_token. 3. add new parameter for lock_token to distinguish reconfig_mutex is held or not. And, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD in below: 1. set it before unregister thread, otherwise a deadlock could appear if stop a resyncing array. This is because md_unregister_thread(&cinfo->recv_thread) is blocked by recv_daemon -> process_recvd_msg -> process_metadata_update. To resolve the issue, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is also need to be set before unregister thread. 2. set it in metadata_update_start to fix another deadlock. a. Node A sends METADATA_UPDATED msg (held Token lock). b. Node B wants to do resync, and is blocked since it can't get Token lock, but MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD is not set since the callchain (md_do_sync -> sync_request -> resync_info_update -> sendmsg -> lock_comm -> lock_token) doesn't hold reconfig_mutex. c. Node B trys to update sb (held reconfig_mutex), but stopped at wait_event() in metadata_update_start since we have set MD_CLUSTER_SEND_LOCK flag in lock_comm (step 2). d. Then Node B receives METADATA_UPDATED msg from A, of course recv_daemon is blocked forever. Since metadata_update_start always calls lock_token with reconfig_mutex, we need to set MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD here as well, and lock_token don't need to set it twice unless lock_token is invoked from lock_comm. Finally, thanks to Neil for his great idea and help! Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md-cluster: remove useless memset from gather_all_resync_infoGuoqing Jiang1-1/+0
This memset is not needed. The lvb is already zeroed because it was recently allocated by lockres_init, which uses kzalloc(), and read_resync_info() doesn't need it to be zero anyway. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md-cluster: free md_cluster_info if node leave clusterGuoqing Jiang1-0/+1
To avoid memory leak, we need to free the cinfo which is allocated when node join cluster. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-09-21md-cluster: make resync lock also could be interrupttedGuoqing Jiang1-2/+3
When one node is perform resync or recovery, other nodes can't get resync lock and could block for a while before it holds the lock, so we can't stop array immediately for this scenario. To make array could be stop quickly, we check MD_CLOSING in dlm_lock_sync_interruptible to make us can interrupt the lock request. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-09-21md-cluster: introduce dlm_lock_sync_interruptible to fix tasks hangGuoqing Jiang1-1/+39
When some node leaves cluster, then it's bitmap need to be synced by another node, so "md*_recover" thread is triggered for the purpose. However, with below steps. we can find tasks hang happened either in B or C. 1. Node A create a resyncing cluster raid1, assemble it in other two nodes (B and C). 2. stop array in B and C. 3. stop array in A. linux44:~ # ps aux|grep md|grep D root 5938 0.0 0.1 19852 1964 pts/0 D+ 14:52 0:00 mdadm -S md0 root 5939 0.0 0.0 0 0 ? D 14:52 0:00 [md0_recover] linux44:~ # cat /proc/5939/stack [<ffffffffa04cf321>] dlm_lock_sync+0x71/0x90 [md_cluster] [<ffffffffa04d0705>] recover_bitmaps+0x125/0x220 [md_cluster] [<ffffffffa052105d>] md_thread+0x16d/0x180 [md_mod] [<ffffffff8107ad94>] kthread+0xb4/0xc0 [<ffffffff8152a518>] ret_from_fork+0x58/0x90 linux44:~ # cat /proc/5938/stack [<ffffffff8107afde>] kthread_stop+0x6e/0x120 [<ffffffffa0519da0>] md_unregister_thread+0x40/0x80 [md_mod] [<ffffffffa04cfd20>] leave+0x70/0x120 [md_cluster] [<ffffffffa0525e24>] md_cluster_stop+0x14/0x30 [md_mod] [<ffffffffa05269ab>] bitmap_free+0x14b/0x150 [md_mod] [<ffffffffa0523f3b>] do_md_stop+0x35b/0x5a0 [md_mod] [<ffffffffa0524e83>] md_ioctl+0x873/0x1590 [md_mod] [<ffffffff81288464>] blkdev_ioctl+0x214/0x7d0 [<ffffffff811dd3dd>] block_ioctl+0x3d/0x40 [<ffffffff811b92d4>] do_vfs_ioctl+0x2d4/0x4b0 [<ffffffff811b9538>] SyS_ioctl+0x88/0xa0 [<ffffffff8152a5c9>] system_call_fastpath+0x16/0x1b The problem is caused by recover_bitmaps can't reliably abort when the thread is unregistered. So dlm_lock_sync_interruptible is introduced to detect the thread's situation to fix the problem. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-09-21md-cluster: convert the completion to wait queueGuoqing Jiang1-5/+9
Previously, we used completion to sync between require dlm lock and sync_ast, however we will have to expose completion.wait and completion.done in dlm_lock_sync_interruptible (introduced later), it is not a common usage for completion, so convert related things to wait queue. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-09-21md-cluster: protect md_find_rdev_nr_rcu with rcu lockGuoqing Jiang1-4/+8
We need to use rcu_read_lock/unlock to avoid potential race. Reported-by: Shaohua Li <shli@fb.com> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-09-21md-cluster: remove some unnecessary dlm_unlock_syncGuoqing Jiang1-5/+1
Since DLM_LKF_FORCEUNLOCK is used in lockres_free, we don't need to call dlm_unlock_sync before free lock resource. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-09-21md-cluster: use FORCEUNLOCK in lockres_freeGuoqing Jiang1-15/+11
For dlm_unlock, we need to pass flag to dlm_unlock as the third parameter instead of set res->flags. Also, DLM_LKF_FORCEUNLOCK is more suitable for dlm_unlock since it works even the lock is on waiting or convert queue. Acked-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-08-24md-cluster: fix error return code in join()Wei Yongjun1-3/+9
Fix to return error code -ENOMEM from the lockres_init() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-09md-cluster: check the return value of process_recvd_msgGuoqing Jiang1-3/+10
We don't need to run the full path of recv_daemon if process_recvd_msg doesn't return 0. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-09md-cluster: gather resync infos and enable recv_thread after bitmap is readyGuoqing Jiang1-6/+24
The in-memory bitmap is not ready when node joins cluster, so it doesn't make sense to make gather_all_resync_info() called so earlier, we need to call it after the node's bitmap is setup. Also, recv_thread could be wake up after node joins cluster, but it could cause problem if node receives RESYNCING message without persionality since mddev->pers->quiesce is called in process_suspend_info. This commit introduces a new cluster interface load_bitmaps to fix above problems, load_bitmaps is called in bitmap_load where bitmap and persionality are ready, and load_bitmaps does the following tasks: 1. call gather_all_resync_info to load all the node's bitmap info. 2. set MD_CLUSTER_ALREADY_IN_CLUSTER bit to recv_thread could be wake up, and wake up recv_thread if there is pending recv event. Then ack_bast only wakes up recv_thread after IN_CLUSTER bit is ready otherwise MD_CLUSTER_PENDING_RESYNC_EVENT is set. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-04md-cluster: sync bitmap when node received RESYNCING msgGuoqing Jiang1-0/+27
If the node received RESYNCING message which means another node will perform resync with the area, then we don't want to do it again in another node. Let's set RESYNC_MASK and clear NEEDED_MASK for the region from old-low to new-low which has finished syncing, and the region from old-hi to new-hi is about to syncing, bitmap_sync_with_cluste is introduced for the purpose. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-04md-cluster: fix locking when node joins cluster during message broadcastGuoqing Jiang1-3/+10
If a node joins the cluster while a message broadcast is under way, a lock issue could happen as follows. For a cluster which included two nodes, if node A is calling __sendmsg before up-convert CR to EX on ack, and node B released CR on ack. But if a new node C joins the cluster and it doesn't receive the message which A sent before, so it could hold CR on ack before A up-convert CR to EX on ack. So a node joining the cluster should get an EX lock on the "token" first to ensure no broadcast is ongoing, then release it after held CR on ack. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-04md-cluster: unregister thread if err happenedGuoqing Jiang1-0/+2
The two threads need to be unregistered if a node can't join cluster successfully. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-04md-cluster: wake up thread to continue recoveryGuoqing Jiang1-3/+6
In recovery case, we need to set MD_RECOVERY_NEEDED and wake up thread only if recover is not finished. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-04md-cluster: change resync lock from asynchronous to synchronousGuoqing Jiang1-2/+0
If multiple nodes choose to attempt do resync at the same time they need to be serialized so they don't duplicate effort. This serialization is done by locking the 'resync' DLM lock. Currently if a node cannot get the lock immediately it doesn't request notification when the lock becomes available (i.e. DLM_LKF_NOQUEUE is set), so it may not reliably find out when it is safe to try again. Rather than trying to arrange an async wake-up when the lock becomes available, switch to using synchronous locking - this is a lot easier to think about. As it is not permitted to block in the 'raid1d' thread, move the locking to the resync thread. So the rsync thread is forked immediately, but it blocks until the resync lock is available. Once the lock is locked it checks again if any resync action is needed. A particular symptom of the current problem is that a node can get stuck with "resync=pending" indefinitely. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-01-24md-cluster: fix missing memory freeShaohua Li1-1/+5
There are several places we allocate dlm_lock_resource, but not free it. leave() need free a lock resource too (from Guoqing) Cc: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Guoqing Jiang <gqjiang@suse.com> Cc: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2016-01-06md-cluster: update comments for MD_CLUSTER_SEND_LOCKED_ALREADYGuoqing Jiang1-5/+18
1. fix unbalanced parentheses. 2. add more description about that MD_CLUSTER_SEND_LOCKED_ALREADY will be cleared after set it in add_new_disk. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06md-cluster: Protect communication with mutexesGuoqing Jiang1-10/+63
Communication can happen through multiple threads. It is possible that one thread steps over another threads sequence. So, we use mutexes to protect both the send and receive sequences. Send communication is locked through state bit, MD_CLUSTER_SEND_LOCK. Communication is locked with bit manipulation in order to allow "lock and hold" for the add operation. In case of an add operation, if the lock is held, MD_CLUSTER_SEND_LOCKED_ALREADY is set. When md_update_sb() calls metadata_update_start(), it checks (in a single statement to avoid races), if the communication is already locked. If yes, it merely returns zero, else it locks the token lockresource. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06md-cluster: Defer MD reloading to mddev->threadGuoqing Jiang1-1/+3
Reloading of superblock must be performed under reconfig_mutex. However, this cannot be done with md_reload_sb because it would deadlock with the message DLM lock. So, we defer it in md_check_recovery() which is executed by mddev->thread. This introduces a new flag, MD_RELOAD_SB, which if set, will reload the superblock. And good_device_nr is also added to 'struct mddev' which is used to get the num of the good device within cluster raid. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06md-cluster: append some actions when change bitmap from clustered to noneGuoqing Jiang1-0/+57
For clustered raid, we need to do extra actions when change bitmap to none. 1. check if all the bitmap lock could be get or not, if yes then we can continue the change since cluster raid is only active in current node. Otherwise return fail and unlock the related bitmap locks 2. set nodes to 0 and then leave cluster environment. 3. release other nodes's bitmap lock. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06md-cluster: Fix the remove sequence with the new MD reload codeGoldwyn Rodrigues1-1/+1
The remove disk message does not need metadata_update_start(), but can be an independent message. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06md-cluster: remove a disk asynchronously from cluster environmentGuoqing Jiang1-2/+5
For cluster raid, if one disk couldn't be reach in one node, then other nodes would receive the REMOVE message for the disk. In receiving node, we can't call md_kick_rdev_from_array to remove the disk from array synchronously since the disk might still be busy in this node. So let's set a ClusterRemove flag on the disk, then let the thread to do the removal job eventually. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06md-cluster: Avoid the resync ping-pongGoldwyn Rodrigues1-0/+8
If a RESYNCING message with (0,0) has been sent before, do not send it again. This avoids a resync ping pong between the nodes. We read the bitmap lockresource's LVB to figure out the previous value of the RESYNCING message. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-24md-cluster: remove mddev arg from add_resync_info()NeilBrown1-3/+3
The arg isn't used, so its presence is only confusing. Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-24md-cluster: don't cast void pointers when assigning them.NeilBrown1-2/+2
It is common practice in the kernel to leave out this case. It isn't needed and adds little if any value. Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-24md-cluster: discard unused sb_mutex.NeilBrown1-2/+0
Signed-off-by: NeilBrown <neilb@suse.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.