aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/md/md-cluster.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-10-12md-cluster: Use a small window for resyncGoldwyn Rodrigues1-36/+5
Suspending the entire device for resync could take too long. Resync in small chunks. cluster's resync window (32M) is maintained in r1conf as cluster_sync_low and cluster_sync_high and processed in raid1's sync_request(). If the current resync is outside the cluster resync window: 1. Set the cluster_sync_low to curr_resync_completed. 2. Check if the sync will fit in the new window, if not issue a wait_barrier() and set cluster_sync_low to sector_nr. 3. Set cluster_sync_high to cluster_sync_low + resync_window. 4. Send a message to all nodes so they may add it in their suspension list. bitmap_cond_end_sync is modified to allow to force a sync inorder to get the curr_resync_completed uptodate with the sector passed. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-10-12md-cluster: complete all write requests before adding suspend_infoGoldwyn Rodrigues1-2/+5
process_suspend_info - which handles the RESYNCING request - must not reply until all writes which were initiated before the request arrived, have completed. As a by-product, all process_* functions now take mddev as their first arguement making it uniform. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31md-cluster: remove inappropriate try_module_get from join()NeilBrown1-4/+0
md_setup_cluster already calls try_module_get(), so this try_module_get isn't needed. Also, there is no matching module_put (except in error patch), so this leaves an unbalanced module count. Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31md-cluster: Read the disk bitmap sb and check if it needs recoveryGuoqing Jiang1-1/+15
In gather_all_resync_info, we need to read the disk bitmap sb and check if it needs recovery. Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31md-cluster: only call complete(&cinfo->completion) when node join clusterGuoqing Jiang1-1/+10
Introduce MD_CLUSTER_BEGIN_JOIN_CLUSTER flag to make sure complete(&cinfo->completion) is only be invoked when node join cluster. Otherwise node failure could also call the complete, and it doesn't make sense to do it. Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31md-cluster: add missed lockres_freeGuoqing Jiang1-1/+3
We also need to free the lock resource before goto out. Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31md-cluster: remove the unused sb_lockGuoqing Jiang1-9/+0
The sb_lock is not used anywhere, so let's remove it. Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31md-cluster: init suspend_list and suspend_lock early in joinGuoqing Jiang1-3/+2
If the node just join the cluster, and receive the msg from other nodes before init suspend_list, it will cause kernel crash due to NULL pointer dereference, so move the initializations early to fix the bug. md-cluster: Joined cluster 3578507b-e0cb-6d4f-6322-696cd7b1b10c slot 3 BUG: unable to handle kernel NULL pointer dereference at (null) ... ... ... Call Trace: [<ffffffffa0444924>] process_recvd_msg+0x2e4/0x330 [md_cluster] [<ffffffffa0444a06>] recv_daemon+0x96/0x170 [md_cluster] [<ffffffffa045189d>] md_thread+0x11d/0x170 [md_mod] [<ffffffff810768c4>] kthread+0xb4/0xc0 [<ffffffff8151927c>] ret_from_fork+0x7c/0xb0 ... ... ... RIP [<ffffffffa0443581>] __remove_suspend_info+0x11/0xa0 [md_cluster] Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31md-cluster: add the error check if failed to get dlm lockGuoqing Jiang1-6/+35
In complicated cluster environment, it is possible that the dlm lock couldn't be get/convert on purpose, the related err info is added for better debug potential issue. For lockres_free, if the lock is blocking by a lock request or conversion request, then dlm_unlock just put it back to grant queue, so need to ensure the lock is free finally. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31md-cluster: init completion within lockres_initGuoqing Jiang1-2/+1
We should init completion within lockres_init, otherwise completion could be initialized more than one time during it's life cycle. Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31md-cluster: fix deadlock issue on message lockGuoqing Jiang1-7/+7
There is problem with previous communication mechanism, and we got below deadlock scenario with cluster which has 3 nodes. Sender Receiver Receiver token(EX) message(EX) writes message downconverts message(CR) requests ack(EX) get message(CR) gets message(CR) reads message reads message requests EX on message requests EX on message To fix this problem, we do the following changes: 1. the sender downconverts MESSAGE to CW rather than CR. 2. and the receiver request PR lock not EX lock on message. And in case we failed to down-convert EX to CW on message, it is better to unlock message otherthan still hold the lock. Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Lidong Zhong <ldzhong@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31md-cluster: transfer the resync ownership to another nodeGuoqing Jiang1-0/+15
When node A stops an array while the array is doing a resync, we need to let another node B take over the resync task. To achieve the goal, we need the A send an explicit BITMAP_NEEDS_SYNC message to the cluster. And the node B which received that message will invoke __recover_slot to do resync. Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31md-cluster: split recover_slot for future code reuseGuoqing Jiang1-7/+16
Make recover_slot as a wraper to __recover_slot, since the logic of __recover_slot can be reused for the condition when other nodes need to take over the resync job. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-08-31md-cluster: use %pU to print UUIDsGuoqing Jiang1-14/+2
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-07-24Fix read-balancing during node failureGoldwyn Rodrigues1-1/+11
During a node failure, We need to suspend read balancing so that the reads are directed to the first device and stale data is not read. Suspending writes is not required because these would be recorded and synced eventually. A new flag MD_CLUSTER_SUSPEND_READ_BALANCING is set in recover_prep(). area_resyncing() will respond true for the entire devices if this flag is set and the request type is READ. The flag is cleared in recover_done(). Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reported-By: David Teigland <teigland@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-04-22md-cluster: re-add capabilitiesGoldwyn Rodrigues1-1/+47
When "re-add" is writted to /sys/block/mdXX/md/dev-YYY/state, the clustered md: 1. Sends RE_ADD message with the desc_nr. Nodes receiving the message clear the Faulty bit in their respective rdev->flags. 2. The node initiating re-add, gathers the bitmaps of all nodes and copies them into the local bitmap. It does not clear the bitmap from which it is copying. 3. Initiating node schedules a md recovery to sync the devices. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-22md-cluster: remove capabilitiesGoldwyn Rodrigues1-0/+30
This adds "remove" capabilities for the clustered environment. When a user initiates removal of a device from the array, a REMOVE message with disk number in the array is sent to all the nodes which kick the respective device in their own array. This facilitates the removal of failed devices. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-22md-cluster: correct the num for comparisonGuoqing Jiang1-3/+3
Since the node num of md-cluster is from zero, and cinfo->slot_number represents the slot num of dlm, no need to check for equality. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-03-21md/cluster: Communication Framework: fix semicolon.cocci warningskbuild test robot1-1/+1
drivers/md/md-cluster.c:328:2-3: Unneeded semicolon Removes unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-03-21md: recover_bitmaps() can be statickbuild test robot1-1/+1
drivers/md/md-cluster.c:190:6: sparse: symbol 'recover_bitmaps' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-03-21md: Fix stray --cluster-confirm crashGoldwyn Rodrigues1-1/+14
A --cluster-confirm without an --add (by another node) can crash the kernel. Fix it by guarding it using a state. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-02-23Add new disk to clustered arrayGoldwyn Rodrigues1-1/+103
Algorithm: 1. Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues ioctl(ADD_NEW_DISC with disc.state set to MD_DISK_CLUSTER_ADD) 2. Node 1 sends NEWDISK with uuid and slot number 3. Other nodes issue kobject_uevent_env with uuid and slot number (Steps 4,5 could be a udev rule) 4. In userspace, the node searches for the disk, perhaps using blkid -t SUB_UUID="" 5. Other nodes issue either of the following depending on whether the disk was found: ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CANDIDATE and disc.number set to slot number) ioctl(CLUSTERED_DISK_NACK) 6. Other nodes drop lock on no-new-devs (CR) if device is found 7. Node 1 attempts EX lock on no-new-devs 8. If node 1 gets the lock, it sends METADATA_UPDATED after unmarking the disk as SpareLocal 9. If not (get no-new-dev lock), it fails the operation and sends METADATA_UPDATED 10. Other nodes understand if the device is added or not by reading the superblock again after receiving the METADATA_UPDATED message. Signed-off-by: Lidong Zhong <lzhong@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Suspend writes in RAID1 if within rangeGoldwyn Rodrigues1-0/+20
If there is a resync going on, all nodes must suspend writes to the range. This is recorded in the suspend_info/suspend_list. If there is an I/O within the ranges of any of the suspend_info, should_suspend will return 1. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Resync start/Finish actionsGoldwyn Rodrigues1-0/+46
When a RESYNC_START message arrives, the node removes the entry with the current slot number and adds the range to the suspend_list. Simlarly, when a RESYNC_FINISHED message is received, node clears entry with respect to the bitmap number. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Send RESYNCING while performing resync start/stopGoldwyn Rodrigues1-0/+32
When a resync is initiated, RESYNCING message is sent to all active nodes with the range (lo,hi). When the resync is over, a RESYNCING message is sent with (0,0). A high sector value of zero indicates that the resync is over. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Reload superblock if METADATA_UPDATED is receivedGoldwyn Rodrigues1-0/+1
Re-reads the devices by invalidating the cache. Since we don't write to faulty devices, this is detected using events recorded in the devices. If it is old as compared to the mddev mark it is faulty. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23metadata_update sends message to other nodesGoldwyn Rodrigues1-0/+28
- request to send a message - make changes to superblock - send messages telling everyone that the superblock has changed - other nodes all read the superblock - other nodes all ack the messages - updating node release the "I'm sending a message" resource. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Communication Framework: Sending functionsGoldwyn Rodrigues1-0/+87
The sending part is split in two functions to make sure atomicity of the operations, such as the MD superblock update. Signed-off-by: Lidong Zhong <lzhong@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Communication Framework: ReceivingGoldwyn Rodrigues1-0/+102
1. receive status sender receiver receiver ACK:CR ACK:CR ACK:CR 2. sender get EX of TOKEN sender get EX of MESSAGE sender receiver receiver TOKEN:EX ACK:CR ACK:CR MESSAGE:EX ACK:CR 3. sender write LVB. sender down-convert MESSAGE from EX to CR sender try to get EX of ACK [ wait until all receiver has *processed* the MESSAGE ] [ triggered by bast of ACK ] receiver get CR of MESSAGE receiver read LVB receiver processes the message [ wait finish ] receiver release ACK sender receiver receiver TOKEN:EX MESSAGE:CR MESSAGE:CR MESSAGE:CR ACK:EX 4. sender down-convert ACK from EX to CR sender release MESSAGE sender release TOKEN receiver upconvert to EX of MESSAGE receiver get CR of ACK receiver release MESSAGE sender receiver receiver ACK:CR ACK:CR ACK:CR Signed-off-by: Lidong Zhong <lzhong@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Perform resync for cluster node failureGoldwyn Rodrigues1-1/+11
If bitmap_copy_slot returns hi>0, we need to perform resync. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Initiate recovery on node failureGoldwyn Rodrigues1-0/+58
The DLM informs us in case of node failure with the DLM slot number. cluster_info->recovery_map sets the bit corresponding to the slot number and wakes up the recovery thread. The recovery thread: 1. Derives the slot number from the recovery_map 2. Locks the bitmap corresponding to the slot 3. Copies the set bits to the node-local bitmap Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Gather on-going resync information of other nodesGoldwyn Rodrigues1-0/+111
When a node joins, it does not know of other nodes performing resync. So, each node keeps the resync information in it's LVB. When a new node joins, it reads the LVB of each "online" bitmap. [TODO] The new node attempts to get the PW lock on other bitmap, if it is successful, it reads the bitmap and performs the resync (if required) on it's behalf. If the node does not get the PW, it requests CR and reads the LVB for the resync information. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Lock bitmap while joining the clusterGoldwyn Rodrigues1-0/+14
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Use separate bitmaps for each nodes in the clusterGoldwyn Rodrigues1-0/+6
On-disk format: 0 4k 8k 12k ------------------------------------------------------------------- | idle | md super | bm super [0] + bits | | bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] | | bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits | | bm bits [3, contd] | | | Bitmap super has a field nodes, which defines the maximum number of nodes the device can use. While reading the bitmap super, if the cluster finds out that the number of nodes is > 0: 1. Requests the md-cluster module. 2. Calls md_cluster_ops->join(), which sets up clustering such as joining DLM lockspace. Since the first time, the first bitmap is read. After the call to the cluster_setup, the bitmap offset is adjusted and the superblock is re-read. This also ensures the bitmap is read the bitmap lock (when bitmap lock is introduced in later patches) Questions: 1. cluster name is repeated in all bitmap supers. Is that okay? Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Add node recovery callbacksGoldwyn Rodrigues1-5/+57
DLM offers callbacks when a node fails and the lock remastery is performed: 1. recover_prep: called when DLM discovers a node is down 2. recover_slot: called when DLM identifies the node and recovery can start 3. recover_done: called when all nodes have completed recover_slot recover_slot() and recover_done() are also called when the node joins initially in order to inform the node with its slot number. These slot numbers start from one, so we deduct one to make it start with zero which the cluster-md code uses. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Introduce md_cluster_infoGoldwyn Rodrigues1-3/+62
md_cluster_info stores the cluster information in the MD device. The join() is called when mddev detects it is a clustered device. The main responsibilities are: 1. Setup a DLM lockspace 2. Setup all initial locks such as super block locks and bitmap lock (will come later) The leave() clears up the lockspace and all the locks held. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Introduce md_cluster_operations to handle cluster functionsGoldwyn Rodrigues1-0/+18
This allows dynamic registering of cluster hooks. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23DLM lock and unlock functionsGoldwyn Rodrigues1-0/+102
A dlm_lock_resource is a structure which contains all information required for locking using DLM. The init function allocates the lock and acquires the lock in NL mode. The unlock function converts the lock resource to NL mode. This is done to preserve LVB and for faster processing of locks. The lock resource is DLM unlocked only in the lockres_free function, which is the end of life of the lock resource. Signed-off-by: Lidong Zhong <lzhong@suse.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23Create a separate module for clustering supportGoldwyn Rodrigues1-0/+28
Tagged as EXPERIMENTAL for now. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.