aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/md/raid0.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2006-10-03[PATCH] md: define backing_dev_info.congested_fn for raid0 and linearNeilBrown1-0/+17
Each backing_dev needs to be able to report whether it is congested, either by modulating BDI_*_congested in ->state, or by defining a ->congested_fn. md/raid did neither of these. This patch add a congested_fn which simply checks all component devices to see if they are congested. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] md: fix possible oops when starting a raid0 arrayNeilBrown1-2/+3
This loop that sets up the hash_table has problems. Careful examination will show that the last time through, everything but the first line is pointless. This is because all it does is change 'cur' and 'size' and neither of these are used after the loop. This should ring warning bells... That last time through the loop, size += conf->strip_zone[cur].size can index off the end of the strip_zone array. Depending on what it finds there, it might exit the loop cleanly, or it might spin going further and further beyond the array until it hits an unmapped address. This patch rearranges the code so that the last, pointless, iteration of the loop never happens. i.e. the one statement of the last loop that is needed is moved the the end of the previous loop - or to before the loop starts - and the loop counter starts from 1 instead of 0. Cc: "Don Dupuis" <dondster@gmail.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] md: Assorted little md fixesNeilBrown1-1/+1
- version-1 superblock + The default_bitmap_offset is in sectors, not bytes. + the 'size' field in the superblock is in sectors, not KB - raid0_run should return a negative number on error, not '1' - raid10_read_balance should not return a valid 'disk' number if ->rdev turned out to be NULL - kmem_cache_destroy doesn't like being passed a NULL. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] remove gcc-2 checksAndrew Morton1-6/+0
Remove various things which were checking for gcc-1.x and gcc-2.x compilers. From: Adrian Bunk <bunk@stusta.de> Some documentation updates and removes some code paths for gcc < 3.2. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: allow array level to be set textually via sysfsNeilBrown1-0/+1
Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: remove personality numbering from mdNeilBrown1-4/+10
md supports multiple different RAID level, each being implemented by a 'personality' (which is often in a separate module). These personalities have fairly artificial 'numbers'. The numbers are use to: 1- provide an index into an array where the various personalities are recorded 2- identify the module (via an alias) which implements are particular personality. Neither of these uses really justify the existence of personality numbers. The array can be replaced by a linked list which is searched (array lookup only happens very rarely). Module identification can be done using an alias based on level rather than 'personality' number. The current 'raid5' modules support two level (4 and 5) but only one personality. This slight awkwardness (which was handled in the mapping from level to personality) can be better handled by allowing raid5 to register 2 personalities. With this change in place, the core md module does not need to have an exhaustive list of all possible personalities, so other personalities can be added independently. This patch also moves the check for chunksize being non-zero into the ->run routines for the personalities that need it, rather than having it in core-md. This has a side effect of allowing 'faulty' and 'linear' not to have a chunk-size set. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: convert md to use kzalloc throughoutNeilBrown1-7/+2
Replace multiple kmalloc/memset pairs with kzalloc calls. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] md: clean up 'page' related names in mdNeilBrown1-1/+1
Substitute: page_cache_get -> get_page page_cache_release -> put_page PAGE_CACHE_SHIFT -> PAGE_SHIFT PAGE_CACHE_SIZE -> PAGE_SIZE PAGE_CACHE_MASK -> PAGE_MASK __free_page -> put_page because we aren't using the page cache, we are just using pages. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01[BLOCK] Unify the seperate read/write io stat fields into arraysJens Axboe1-7/+3
Instead of having ->read_sectors and ->write_sectors, combine the two into ->sectors[2] and similar for the other fields. This saves a branch several places in the io path, since we don't have to care for what the actual io direction is. On my x86-64 box, that's 200 bytes less text in just the core (not counting the various drivers). Signed-off-by: Jens Axboe <axboe@suse.de>
2005-09-09[PATCH] md: fail IO request to md that require a barrier.NeilBrown1-0/+5
md does not yet support BIO_RW_BARRIER, so be honest about it and fail (-EOPNOTSUPP) any such requests. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-15[PATCH] Fix raid0's attempt to divide by 64bit numbersNeil Brown1-4/+4
Apparently sector_div is only guaranteed to work with a 32bit divisor, even on 64bit architectures. So allow for this in raid0. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] md: remove unneeded NULL checks before kfreeJesper Juhl1-7/+5
This patch removes some unneeded checks of pointers being NULL before calling kfree() on them. kfree() handles NULL pointers just fine, checking first is pointless. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds1-0/+539
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!