aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/md (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-09-17Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-blockLinus Torvalds13-89/+259
Pull block updates from Jens Axboe: - Two NVMe pull requests: - ana log parse fix from Anton - nvme quirks support for Apple devices from Ben - fix missing bio completion tracing for multipath stack devices from Hannes and Mikhail - IP TOS settings for nvme rdma and tcp transports from Israel - rq_dma_dir cleanups from Israel - tracing for Get LBA Status command from Minwoo - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself - Some consolidation between the fabrics transports for handling the CAP register - reset race with ns scanning fix for fabrics (move fabrics commands to a dedicated request queue with a different lifetime from the admin request queue)." - controller reset and namespace scan races fixes - nvme discovery log change uevent support - naming improvements from Keith - multiple discovery controllers reject fix from James - some regular cleanups from various people - Series fixing (and re-fixing) null_blk debug printing and nr_devices checks (André) - A few pull requests from Song, with fixes from Andy, Guoqing, Guilherme, Neil, Nigel, and Yufen. - REQ_OP_ZONE_RESET_ALL support (Chaitanya) - Bio merge handling unification (Christoph) - Pick default elevator correctly for devices with special needs (Damien) - Block stats fixes (Hou) - Timeout and support devices nbd fixes (Mike) - Series fixing races around elevator switching and device add/remove (Ming) - sed-opal cleanups (Revanth) - Per device weight support for BFQ (Fam) - Support for blk-iocost, a new model that can properly account cost of IO workloads. (Tejun) - blk-cgroup writeback fixes (Tejun) - paride queue init fixes (zhengbin) - blk_set_runtime_active() cleanup (Stanley) - Block segment mapping optimizations (Bart) - lightnvm fixes (Hans/Minwoo/YueHaibing) - Various little fixes and cleanups * tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits) null_blk: format pr_* logs with pr_fmt null_blk: match the type of parameter nr_devices null_blk: do not fail the module load with zero devices block: also check RQF_STATS in blk_mq_need_time_stamp() block: make rq sector size accessible for block stats bfq: Fix bfq linkage error raid5: use bio_end_sector in r5_next_bio raid5: remove STRIPE_OPS_REQ_PENDING md: add feature flag MD_FEATURE_RAID0_LAYOUT md/raid0: avoid RAID0 data corruption due to layout confusion. raid5: don't set STRIPE_HANDLE to stripe which is in batch list raid5: don't increment read_errors on EILSEQ return nvmet: fix a wrong error status returned in error log page nvme: send discovery log page change events to userspace nvme: add uevent variables for controller devices nvme: enable aen regardless of the presence of I/O queues nvme-fabrics: allow discovery subsystems accept a kato nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery() nvme: Remove redundant assignment of cq vector nvme: Assign subsys instance from first ctrl ...
2019-09-13raid5: use bio_end_sector in r5_next_bioGuoqing Jiang1-3/+1
Actually, we calculate bio's end sector here, so use the common way for the purpose. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13raid5: remove STRIPE_OPS_REQ_PENDINGGuoqing Jiang2-2/+0
This stripe state is not used anymore after commit 51acbcec6c42b24 ("md: remove CONFIG_MULTICORE_RAID456"), so remove the obsoleted state. gjiang@nb01257:~/md$ grep STRIPE_OPS_REQ_PENDING drivers/md/ -r drivers/md/raid5.c: (1 << STRIPE_OPS_REQ_PENDING) | drivers/md/raid5.h: STRIPE_OPS_REQ_PENDING, Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13md: add feature flag MD_FEATURE_RAID0_LAYOUTNeilBrown2-0/+16
Due to a bug introduced in Linux 3.14 we cannot determine the correctly layout for a multi-zone RAID0 array - there are two possibilities. It is possible to tell the kernel which to chose using a module parameter, but this can be clumsy to use. It would be best if the choice were recorded in the metadata. So add a feature flag for this purpose. If it is set, then the 'layout' field of the superblock is used to determine which layout to use. If this flag is not set, then mddev->layout gets set to -1, which causes the module parameter to be required. Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13md/raid0: avoid RAID0 data corruption due to layout confusion.NeilBrown2-1/+45
If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13raid5: don't set STRIPE_HANDLE to stripe which is in batch listGuoqing Jiang1-1/+2
If stripe in batch list is set with STRIPE_HANDLE flag, then the stripe could be set with STRIPE_ACTIVE by the handle_stripe function. And if error happens to the batch_head at the same time, break_stripe_batch_list is called, then below warning could happen (the same report in [1]), it means a member of batch list was set with STRIPE_ACTIVE. [7028915.431770] stripe state: 2001 [7028915.431815] ------------[ cut here ]------------ [7028915.431828] WARNING: CPU: 18 PID: 29089 at drivers/md/raid5.c:4614 break_stripe_batch_list+0x203/0x240 [raid456] [...] [7028915.431879] CPU: 18 PID: 29089 Comm: kworker/u82:5 Tainted: G O 4.14.86-1-storage #4.14.86-1.2~deb9 [7028915.431881] Hardware name: Supermicro SSG-2028R-ACR24L/X10DRH-iT, BIOS 3.1 06/18/2018 [7028915.431888] Workqueue: raid5wq raid5_do_work [raid456] [7028915.431890] task: ffff9ab0ef36d7c0 task.stack: ffffb72926f84000 [7028915.431896] RIP: 0010:break_stripe_batch_list+0x203/0x240 [raid456] [7028915.431898] RSP: 0018:ffffb72926f87ba8 EFLAGS: 00010286 [7028915.431900] RAX: 0000000000000012 RBX: ffff9aaa84a98000 RCX: 0000000000000000 [7028915.431901] RDX: 0000000000000000 RSI: ffff9ab2bfa15458 RDI: ffff9ab2bfa15458 [7028915.431902] RBP: ffff9aaa8fb4e900 R08: 0000000000000001 R09: 0000000000002eb4 [7028915.431903] R10: 00000000ffffffff R11: 0000000000000000 R12: ffff9ab1736f1b00 [7028915.431904] R13: 0000000000000000 R14: ffff9aaa8fb4e900 R15: 0000000000000001 [7028915.431906] FS: 0000000000000000(0000) GS:ffff9ab2bfa00000(0000) knlGS:0000000000000000 [7028915.431907] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [7028915.431908] CR2: 00007ff953b9f5d8 CR3: 0000000bf4009002 CR4: 00000000003606e0 [7028915.431909] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [7028915.431910] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [7028915.431910] Call Trace: [7028915.431923] handle_stripe+0x8e7/0x2020 [raid456] [7028915.431930] ? __wake_up_common_lock+0x89/0xc0 [7028915.431935] handle_active_stripes.isra.58+0x35f/0x560 [raid456] [7028915.431939] raid5_do_work+0xc6/0x1f0 [raid456] Also commit 59fc630b8b5f9f ("RAID5: batch adjacent full stripe write") said "If a stripe is added to batch list, then only the first stripe of the list should be put to handle_list and run handle_stripe." So don't set STRIPE_HANDLE to stripe which is already in batch list, otherwise the stripe could be put to handle_list and run handle_stripe, then the above warning could be triggered. [1]. https://www.spinics.net/lists/raid/msg62552.html Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13raid5: don't increment read_errors on EILSEQ returnNigel Croxon1-1/+2
While MD continues to count read errors returned by the lower layer. If those errors are -EILSEQ, instead of -EIO, it should NOT increase the read_errors count. When RAID6 is set up on dm-integrity target that detects massive corruption, the leg will be ejected from the array. Even if the issue is correctable with a sector re-write and the array has necessary redundancy to correct it. The leg is ejected because it runs up the rdev->read_errors beyond conf->max_nr_stripes. The return status in dm-drypt when there is a data integrity error is -EILSEQ (BLK_STS_PROTECTION). Signed-off-by: Nigel Croxon <ncroxon@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-05block: Delay default elevator initializationDamien Le Moal1-1/+1
When elevator_init_mq() is called from blk_mq_init_allocated_queue(), the only information known about the device is the number of hardware queues as the block device scan by the device driver is not completed yet for most drivers. The device type and elevator required features are not set yet, preventing to correctly select the default elevator most suitable for the device. This currently affects all multi-queue zoned block devices which default to the "none" elevator instead of the required "mq-deadline" elevator. These drives currently include host-managed SMR disks connected to a smartpqi HBA and null_blk block devices with zoned mode enabled. Upcoming NVMe Zoned Namespace devices will also be affected. Fix this by adding the boolean elevator_init argument to blk_mq_init_allocated_queue() to control the execution of elevator_init_mq(). Two cases exist: 1) elevator_init = false is used for calls to blk_mq_init_allocated_queue() within blk_mq_init_queue(). In this case, a call to elevator_init_mq() is added to __device_add_disk(), resulting in the delayed initialization of the queue elevator after the device driver finished probing the device information. This effectively allows elevator_init_mq() access to more information about the device. 2) elevator_init = true preserves the current behavior of initializing the elevator directly from blk_mq_init_allocated_queue(). This case is used for the special request based DM devices where the device gendisk is created before the queue initialization and device information (e.g. queue limits) is already known when the queue initialization is executed. Additionally, to make sure that the elevator initialization is never done while requests are in-flight (there should be none when the device driver calls device_add_disk()), freeze and quiesce the device request queue before calling blk_mq_init_sched() in elevator_init_mq(). Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-03md/raid5: use bio_end_sector to calculate last_sectorGuoqing Jiang1-1/+1
Use the common way to get last_sector. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-03md/raid1: fail run raid1 array when active disk less than oneYufen Yu1-1/+12
When run test case: mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal mdadm -S /dev/md1 mdadm -A /dev/md1 /dev/sd[b-c] --run --force mdadm --zero /dev/sda mdadm /dev/md1 -a /dev/sda echo offline > /sys/block/sdc/device/state echo offline > /sys/block/sdb/device/state sleep 5 mdadm -S /dev/md1 echo running > /sys/block/sdb/device/state echo running > /sys/block/sdc/device/state mdadm -A /dev/md1 /dev/sd[a-c] --run --force mdadm run fail with kernel message as follow: [ 172.986064] md: kicking non-fresh sdb from array! [ 173.004210] md: kicking non-fresh sdc from array! [ 173.022383] md/raid1:md1: active with 0 out of 4 mirrors [ 173.022406] md1: failed to create bitmap (-5) In fact, when active disk in raid1 array less than one, we need to return fail in raid1_run(). Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-03md raid0/linear: Mark array as 'broken' and fail BIOs if a member is goneGuilherme G. Piccoli4-4/+45
Currently md raid0/linear are not provided with any mechanism to validate if an array member got removed or failed. The driver keeps sending BIOs regardless of the state of array members, and kernel shows state 'clean' in the 'array_state' sysfs attribute. This leads to the following situation: if a raid0/linear array member is removed and the array is mounted, some user writing to this array won't realize that errors are happening unless they check dmesg or perform one fsync per written file. Despite udev signaling the member device is gone, 'mdadm' cannot issue the STOP_ARRAY ioctl successfully, given the array is mounted. In other words, no -EIO is returned and writes (except direct ones) appear normal. Meaning the user might think the wrote data is correctly stored in the array, but instead garbage was written given that raid0 does stripping (and so, it requires all its members to be working in order to not corrupt data). For md/linear, writes to the available members will work fine, but if the writes go to the missing member(s), it'll cause a file corruption situation, whereas the portion of the writes to the missing devices aren't written effectively. This patch changes this behavior: we check if the block device's gendisk is UP when submitting the BIO to the array member, and if it isn't, we flag the md device as MD_BROKEN and fail subsequent I/Os to that device; a read request to the array requiring data from a valid member is still completed. While flagging the device as MD_BROKEN, we also show a rate-limited warning in the kernel log. A new array state 'broken' was added too: it mimics the state 'clean' in every aspect, being useful only to distinguish if the array has some member missing. We rely on the MD_BROKEN flag to put the array in the 'broken' state. This state cannot be written in 'array_state' as it just shows one or more members of the array are missing but acts like 'clean', it wouldn't make sense to write it. With this patch, the filesystem reacts much faster to the event of missing array member: after some I/O errors, ext4 for instance aborts the journal and prevents corruption. Without this change, we're able to keep writing in the disk and after a machine reboot, e2fsck shows some severe fs errors that demand fixing. This patch was tested in ext4 and xfs filesystems, and requires a 'mdadm' counterpart to handle the 'broken' state. Cc: Song Liu <songliubraving@fb.com> Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-03closures: fix a race on wakeup from closure_syncKent Overstreet1-2/+8
The race was when a thread using closure_sync() notices cl->s->done == 1 before the thread calling closure_put() calls wake_up_process(). Then, it's possible for that thread to return and exit just before wake_up_process() is called - so we're trying to wake up a process that no longer exists. rcu_read_lock() is sufficient to protect against this, as there's an rcu barrier somewhere in the process teardown path. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-03bcache: Fix an error code in bch_dump_read()Dan Carpenter1-3/+2
The copy_to_user() function returns the number of bytes remaining to be copied, but the intention here was to return -EFAULT if the copy fails. Fixes: cafe56359144 ("bcache: A block layer cache") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-03bcache: add cond_resched() in __bch_cache_cmp()Shile Zhang1-0/+1
Read /sys/fs/bcache/<uuid>/cacheN/priority_stats can take very long time with huge cache after long run. Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com> Tested-by: Heitor Alves de Siqueira <halves@canonical.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27raid5 improve too many read errors msg by adding limitsNigel Croxon1-4/+10
Often limits can be changed by admin. When discussing such things it helps if you can provide "self-sustained" facts. Also sometimes the admin thinks he changed a limit, but it did not take effect for some reason or he changed the wrong thing. V3: Only pr_warn when Faulty is 0. V2: Add read_errors value to pr_warn. Signed-off-by: Nigel Croxon <ncroxon@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-27md: don't report active array_state until after revalidate_disk() completes.NeilBrown2-4/+10
Until revalidate_disk() has completed, the size of a new md array will appear to be zero. So we shouldn't report, through array_state, that the array is active until that time. udev rules check array_state to see if the array is ready. As soon as it appear to be zero, fsck can be run. If it find the size to be zero, it will fail. So add a new flag to provide an interlock between do_md_run() and array_state_show(). This flag is set while do_md_run() is active and it prevents array_state_show() from reporting that the array is active. Before do_md_run() is called, ->pers will be NULL so array is definitely not active. After do_md_run() is called, revalidate_disk() will have run and the array will be completely ready. We also move various sysfs_notify*() calls out of md_run() into do_md_run() after MD_NOT_READY is cleared. This ensure the information is ready before the notification is sent. Prior to v4.12, array_state_show() was called with the mddev->reconfig_mutex held, which provided exclusion with do_md_run(). Note that MD_NOT_READY cleared twice. This is deliberate to cover both success and error paths with minimal noise. Fixes: b7b17c9b67e5 ("md: remove mddev_lock() from md_attr_show()") Cc: stable@vger.kernel.org (v4.12++) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-27md: only call set_in_sync() when it is expected to succeed.NeilBrown1-1/+2
Since commit 4ad23a976413 ("MD: use per-cpu counter for writes_pending"), set_in_sync() is substantially more expensive: it can wait for a full RCU grace period which can be 10s of milliseconds. So we should only call it when the cost is justified. md_check_recovery() currently calls set_in_sync() every time it finds anything to do (on non-external active arrays). For an array performing resync or recovery, this will be quite often. Each call will introduce a delay to the md thread, which can noticeable affect IO submission latency. In md_check_recovery() we only need to call set_in_sync() if 'safemode' was non-zero at entry, meaning that there has been not recent IO. So we save this "safemode was nonzero" state, and only call set_in_sync() if it was non-zero. This measurably reduces mean and maximum IO submission latency during resync/recovery. Reported-and-tested-by: Jack Wang <jinpu.wang@cloud.ionos.com> Fixes: 4ad23a976413 ("MD: use per-cpu counter for writes_pending") Cc: stable@vger.kernel.org (v4.12+) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-23dm table: fix invalid memory accesses with too high sector numberMikulas Patocka1-1/+4
If the sector number is too high, dm_table_find_target() should return a pointer to a zeroed dm_target structure (the caller should test it with dm_target_is_valid). However, for some table sizes, the code in dm_table_find_target() that performs btree lookup will access out of bound memory structures. Fix this bug by testing the sector number at the beginning of dm_table_find_target(). Also, add an "inline" keyword to the function dm_table_get_size() because this is a hot path. Fixes: 512875bd9661 ("dm: table detect io beyond device") Cc: stable@vger.kernel.org Reported-by: Zhang Tao <kontais@zoho.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-22dm space map metadata: fix missing store of apply_bops() return valueZhangXiaoxu1-1/+1
In commit 6096d91af0b6 ("dm space map metadata: fix occasional leak of a metadata block on resize"), we refactor the commit logic to a new function 'apply_bops'. But when that logic was replaced in out() the return value was not stored. This may lead out() returning a wrong value to the caller. Fixes: 6096d91af0b6 ("dm space map metadata: fix occasional leak of a metadata block on resize") Cc: stable@vger.kernel.org Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-22dm btree: fix order of block initialization in btree_split_beneathZhangXiaoxu1-15/+16
When btree_split_beneath() splits a node to two new children, it will allocate two blocks: left and right. If right block's allocation failed, the left block will be unlocked and marked dirty. If this happened, the left block'ss content is zero, because it wasn't initialized with the btree struct before the attempot to allocate the right block. Upon return, when flushing the left block to disk, the validator will fail when check this block. Then a BUG_ON is raised. Fix this by completely initializing the left block before allocating and initializing the right block. Fixes: 4dcb8b57df359 ("dm btree: fix leak of bufio-backed block in btree_split_beneath error path") Cc: stable@vger.kernel.org Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-21dm raid: add missing cleanup in raid_ctr()Wenwen Wang1-1/+1
If rs_prepare_reshape() fails, no cleanup is executed, leading to leak of the raid_set structure allocated at the beginning of raid_ctr(). To fix this issue, go to the label 'bad' if the error occurs. Fixes: 11e4723206683 ("dm raid: stop keeping raid set frozen altogether") Cc: stable@vger.kernel.org Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-21dm zoned: fix potential NULL dereference in dmz_do_reclaim()Dan Carpenter1-2/+2
This function is supposed to return error pointers so it matches the dmz_get_rnd_zone_for_reclaim() function. The current code could lead to a NULL dereference in dmz_do_reclaim() Fixes: b234c6d7a703 ("dm zoned: improve error handling in reclaim") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-21dm dust: use dust block size for badblocklist indexBryan Gurney1-3/+8
Change the "frontend" dust_remove_block, dust_add_block, and dust_query_block functions to store the "dust block number", instead of the sector number corresponding to the "dust block number". For the "backend" functions dust_map_read and dust_map_write, right-shift by sect_per_block_shift. This fixes the inability to emulate failure beyond the first sector of each "dust block" (for devices with a "dust block size" larger than 512 bytes). Fixes: e4f3fabd67480bf ("dm: add dust target") Cc: stable@vger.kernel.org Signed-off-by: Bryan Gurney <bgurney@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-15dm integrity: fix a crash due to BUG_ON in __journal_read_write()Mikulas Patocka1-0/+15
Fix a crash that was introduced by the commit 724376a04d1a. The crash is reported here: https://gitlab.com/cryptsetup/cryptsetup/issues/468 When reading from the integrity device, the function dm_integrity_map_continue calls find_journal_node to find out if the location to read is present in the journal. Then, it calculates how many sectors are consecutively stored in the journal. Then, it locks the range with add_new_range and wait_and_add_new_range. The problem is that during wait_and_add_new_range, we hold no locks (we don't hold ic->endio_wait.lock and we don't hold a range lock), so the journal may change arbitrarily while wait_and_add_new_range sleeps. The code then goes to __journal_read_write and hits BUG_ON(journal_entry_get_sector(je) != logical_sector); because the journal has changed. In order to fix this bug, we need to re-check the journal location after wait_and_add_new_range. We restrict the length to one block in order to not complicate the code too much. Fixes: 724376a04d1a ("dm integrity: implement fair range locks") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-15dm zoned: fix a few typosDmitry Fomichev2-5/+5
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-15dm zoned: add SPDX license identifiersDmitry Fomichev4-0/+4
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-15dm zoned: properly handle backing device failureDmitry Fomichev4-14/+110
dm-zoned is observed to lock up or livelock in case of hardware failure or some misconfiguration of the backing zoned device. This patch adds a new dm-zoned target function that checks the status of the backing device. If the request queue of the backing device is found to be in dying state or the SCSI backing device enters offline state, the health check code sets a dm-zoned target flag prompting all further incoming I/O to be rejected. In order to detect backing device failures timely, this new function is called in the request mapping path, at the beginning of every reclaim run and before performing any metadata I/O. The proper way out of this situation is to do dmsetup remove <dm-zoned target> and recreate the target when the problem with the backing device is resolved. Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-15dm zoned: improve error handling in i/o map codeDmitry Fomichev1-6/+16
Some errors are ignored in the I/O path during queueing chunks for processing by chunk works. Since at least these errors are transient in nature, it should be possible to retry the failed incoming commands. The fix - Errors that can happen while queueing chunks are carried upwards to the main mapping function and it now returns DM_MAPIO_REQUEUE for any incoming requests that can not be properly queued. Error logging/debug messages are added where needed. Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-15dm zoned: improve error handling in reclaimDmitry Fomichev2-11/+21
There are several places in reclaim code where errors are not propagated to the main function, dmz_reclaim(). This function is responsible for unlocking zones that might be still locked at the end of any failed reclaim iterations. As the result, some device zones may be left permanently locked for reclaim, degrading target's capability to reclaim zones. This patch fixes these issues as follows - Make sure that dmz_reclaim_buf(), dmz_reclaim_seq_data() and dmz_reclaim_rnd_data() return error codes to the caller. dmz_reclaim() function is renamed to dmz_do_reclaim() to avoid clashing with "struct dmz_reclaim" and is modified to return the error to the caller. dmz_get_zone_for_reclaim() now returns an error instead of NULL pointer and reclaim code checks for that error. Error logging/debug messages are added where necessary. Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-15dm kcopyd: always complete failed jobsDmitry Fomichev1-1/+4
This patch fixes a problem in dm-kcopyd that may leave jobs in complete queue indefinitely in the event of backing storage failure. This behavior has been observed while running 100% write file fio workload against an XFS volume created on top of a dm-zoned target device. If the underlying storage of dm-zoned goes to offline state under I/O, kcopyd sometimes never issues the end copy callback and dm-zoned reclaim work hangs indefinitely waiting for that completion. This behavior was traced down to the error handling code in process_jobs() function that places the failed job to complete_jobs queue, but doesn't wake up the job handler. In case of backing device failure, all outstanding jobs may end up going to complete_jobs queue via this code path and then stay there forever because there are no more successful I/O jobs to wake up the job handler. This patch adds a wake() call to always wake up kcopyd job wait queue for all I/O jobs that fail before dm_io() gets called for that job. The patch also sets the write error status in all sub jobs that are failed because their master job has failed. Fixes: b73c67c2cbb00 ("dm kcopyd: add sequential write feature") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-15Revert "dm bufio: fix deadlock with loop device"Mikulas Patocka1-1/+3
Revert the commit bd293d071ffe65e645b4d8104f9d8fe15ea13862. The proper fix has been made available with commit d0a255e795ab ("loop: set PF_MEMALLOC_NOIO for the worker thread"). Note that the fix offered by commit bd293d071ffe doesn't really prevent the deadlock from occuring - if we look at the stacktrace reported by Junxiao Bi, we see that it hangs in bit_wait_io and not on the mutex - i.e. it has already successfully taken the mutex. Changing the mutex from mutex_lock to mutex_trylock won't help with deadlocks that happen afterwards. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: bd293d071ffe ("dm bufio: fix deadlock with loop device") Depends-on: d0a255e795ab ("loop: set PF_MEMALLOC_NOIO for the worker thread") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-09Merge tag 'for-linus-20190809' of git://git.kernel.dk/linux-blockLinus Torvalds1-8/+12
Pull block fixes from Jens Axboe: - Revert of a bcache patch that caused an oops for some (Coly) - ata rb532 unused warning fix (Gustavo) - AoE kernel crash fix (He) - Error handling fixup for blkdev_get() (Jan) - libata read/write translation and SFF PIO fix (me) - Use after free and error handling fix for O_DIRECT fragments. There's still a nowait + sync oddity in there, we'll nail that start next week. If all else fails, I'll queue a revert of the NOWAIT change. (me) - Loop GFP_KERNEL -> GFP_NOIO deadlock fix (Mikulas) - Two BFQ regression fixes that caused crashes (Paolo) * tag 'for-linus-20190809' of git://git.kernel.dk/linux-block: bcache: Revert "bcache: use sysfs_match_string() instead of __sysfs_match_string()" loop: set PF_MEMALLOC_NOIO for the worker thread bdev: Fixup error handling in blkdev_get() block, bfq: handle NULL return value by bfq_init_rq() block, bfq: move update of waker and woken list to queue freeing block, bfq: reset last_completed_rq_bfqq if the pointed queue is freed block: aoe: Fix kernel crash due to atomic sleep when exiting libata: add SG safety checks in SFF pio transfers libata: have ata_scsi_rw_xlat() fail invalid passthrough requests block: fix O_DIRECT error handling for bio fragments ata: rb532_cf: Fix unused variable warning in rb532_pata_driver_probe
2019-08-09bcache: Revert "bcache: use sysfs_match_string() instead of __sysfs_match_string()"Coly Li1-8/+12
This reverts commit 89e0341af082dbc170019f908846f4a424efc86b. In drivers/md/bcache/sysfs.c:bch_snprint_string_list(), NULL pointer at the end of list is necessary. Remove the NULL from last element of each lists will cause the following panic, [ 4340.455652] bcache: register_cache() registered cache device nvme0n1 [ 4340.464603] bcache: register_bdev() registered backing device sdk [ 4421.587335] bcache: bch_cached_dev_run() cached dev sdk is running already [ 4421.587348] bcache: bch_cached_dev_attach() Caching sdk as bcache0 on set 354e1d46-d99f-4d8b-870b-078b80dc88a6 [ 5139.247950] general protection fault: 0000 [#1] SMP NOPTI [ 5139.247970] CPU: 9 PID: 5896 Comm: cat Not tainted 4.12.14-95.29-default #1 SLE12-SP4 [ 5139.247988] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 04/18/2019 [ 5139.248006] task: ffff888fb25c0b00 task.stack: ffff9bbacc704000 [ 5139.248021] RIP: 0010:string+0x21/0x70 [ 5139.248030] RSP: 0018:ffff9bbacc707bf0 EFLAGS: 00010286 [ 5139.248043] RAX: ffffffffa7e432e3 RBX: ffff8881c20da02a RCX: ffff0a00ffffff04 [ 5139.248058] RDX: 3f00656863616362 RSI: ffff8881c20db000 RDI: ffffffffffffffff [ 5139.248075] RBP: ffff8881c20db000 R08: 0000000000000000 R09: ffff8881c20da02a [ 5139.248090] R10: 0000000000000004 R11: 0000000000000000 R12: ffff9bbacc707c48 [ 5139.248104] R13: 0000000000000fd6 R14: ffffffffc0665855 R15: ffffffffc0665855 [ 5139.248119] FS: 00007faf253b8700(0000) GS:ffff88903f840000(0000) knlGS:0000000000000000 [ 5139.248137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5139.248149] CR2: 00007faf25395008 CR3: 0000000f72150006 CR4: 00000000007606e0 [ 5139.248164] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5139.248179] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5139.248193] PKRU: 55555554 [ 5139.248200] Call Trace: [ 5139.248210] vsnprintf+0x1fb/0x510 [ 5139.248221] snprintf+0x39/0x40 [ 5139.248238] bch_snprint_string_list.constprop.15+0x5b/0x90 [bcache] [ 5139.248256] __bch_cached_dev_show+0x44d/0x5f0 [bcache] [ 5139.248270] ? __alloc_pages_nodemask+0xb2/0x210 [ 5139.248284] bch_cached_dev_show+0x2c/0x50 [bcache] [ 5139.248297] sysfs_kf_seq_show+0xbb/0x190 [ 5139.248308] seq_read+0xfc/0x3c0 [ 5139.248317] __vfs_read+0x26/0x140 [ 5139.248327] vfs_read+0x87/0x130 [ 5139.248336] SyS_read+0x42/0x90 [ 5139.248346] do_syscall_64+0x74/0x160 [ 5139.248358] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 5139.248370] RIP: 0033:0x7faf24eea370 [ 5139.248379] RSP: 002b:00007fff82d03f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5139.248395] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007faf24eea370 [ 5139.248411] RDX: 0000000000020000 RSI: 00007faf25396000 RDI: 0000000000000003 [ 5139.248426] RBP: 00007faf25396000 R08: 00000000ffffffff R09: 0000000000000000 [ 5139.248441] R10: 000000007c9d4d41 R11: 0000000000000246 R12: 00007faf25396000 [ 5139.248456] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff [ 5139.248892] Code: ff ff ff 0f 1f 80 00 00 00 00 49 89 f9 48 89 cf 48 c7 c0 e3 32 e4 a7 48 c1 ff 30 48 81 fa ff 0f 00 00 48 0f 46 d0 48 85 ff 74 45 <44> 0f b6 02 48 8d 42 01 45 84 c0 74 38 48 01 fa 4c 89 cf eb 0e The simplest way to fix is to revert commit 89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()"). This bug was introduced in Linux v5.2, so this fix only applies to Linux v5.2 is enough for stable tree maintainer. Fixes: 89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()") Cc: stable@vger.kernel.org Cc: Alexandru Ardelean <alexandru.ardelean@analog.com> Reported-by: Peifeng Lin <pflin@suse.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-07raid1: factor out a common routine to handle the completion of sync writeHou Tao1-21/+18
It's just code clean-up. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07md: don't call spare_active in md_reap_sync_thread if all member devices can't workGuoqing Jiang1-1/+2
When add one disk to array, the md_reap_sync_thread is responsible to activate the spare and set In_sync flag for the new member in spare_active(). But if raid1 has one member disk A, and disk B is added to the array. Then we offline A before all the datas are synchronized from A to B, obviously B doesn't have the latest data as A, but B is still marked with In_sync flag. So let's not call spare_active under the condition, otherwise B is still showed with 'U' state which is not correct. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07md: don't set In_sync if array is frozenGuoqing Jiang1-2/+9
When a disk is added to array, the following path is called in mdadm. Manage_subdevs -> sysfs_freeze_array -> Manage_add -> sysfs_set_str(&info, NULL, "sync_action","idle") Then from kernel side, Manage_add invokes the path (add_new_disk -> validate_super = super_1_validate) to set In_sync flag. Since In_sync means "device is in_sync with rest of array", and the new added disk need to resync thread to help the synchronization of data. And md_reap_sync_thread would call spare_active to set In_sync for the new added disk finally. So don't set In_sync if array is in frozen. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07md: allow last device to be forcibly removed from RAID1/RAID10.Guoqing Jiang4-6/+36
When the 'last' device in a RAID1 or RAID10 reports an error, we do not mark it as failed. This would serve little purpose as there is no risk of losing data beyond that which is obviously lost (as there is with RAID5), and there could be other sectors on the device which are readable, and only readable from this device. This in general this maximises access to data. However the current implementation also stops an admin from removing the last device by direct action. This is rarely useful, but in many case is not harmful and can make automation easier by removing special cases. Also, if an attempt to write metadata fails the device must be marked as faulty, else an infinite loop will result, attempting to update the metadata on all non-faulty devices. So add 'fail_last_dev' member to 'struct mddev', then we can bypasses the 'last disk' checks for RAID1 and RAID10, and control the behavior per array by change sysfs node. Signed-off-by: NeilBrown <neilb@suse.de> [add sysfs node for fail_last_dev by Guoqing] Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07md: Convert to use int_pow()Andy Shevchenko1-5/+1
Instead of linear approach to calculate power of 10, use generic int_pow() which does it better. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07md/raid10: end bio when the device faultyYufen Yu1-12/+14
Just like raid1, we do not queue write error bio to retry write and acknowlege badblocks, when the device is faulty. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07md/raid1: end bio when the device faultyYufen Yu1-12/+14
When write bio return error, it would be added to conf->retry_list and wait for raid1d thread to retry write and acknowledge badblocks. In narrow_write_error(), the error bio will be split in the unit of badblock shift (such as one sector) and raid1d thread issues them one by one. Until all of the splited bio has finished, raid1d thread can go on processing other things, which is time consuming. But, there is a scene for error handling that is not necessary. When the device has been set faulty, flush_bio_list() may end bios in pending_bio_list with error status. Since these bios has not been issued to the device actually, error handlding to retry write and acknowledge badblocks make no sense. Even without that scene, when the device is faulty, badblocks info can not be written out to the device. Thus, we also no need to handle the error IO. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07md/raid6: Set R5_ReadError when there is read failure on parity diskXiao Ni1-1/+3
7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in RAID6.") avoids rereading P when it can be computed from other members. However, this misses the chance to re-write the right data to P. This patch sets R5_ReadError if the re-read fails. Also, when re-read is skipped, we also missed the chance to reset rdev->read_errors to 0. It can fail the disk when there are many read errors on P member disk (other disks don't have read error) V2: upper layer read request don't read parity/Q data. So there is no need to consider such situation. This is Reported-by: kbuild test robot <lkp@intel.com> Fixes: 7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in RAID6.") Cc: <stable@vger.kernel.org> #4.4+ Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-07raid1: use an int as the return value of raise_barrier()Hou Tao1-1/+4
Using a sector_t as the return value is misleading, because raise_barrier() only return 0 or -EINTR. Also add comments for the return values of raise_barrier(). Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-08-04blk-mq: add callback of .cleanup_rqMing Lei1-0/+1
SCSI maintains its own driver private data hooked off of each SCSI request, and the pridate data won't be freed after scsi_queue_rq() returns BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE. An upper layer driver (e.g. dm-rq) may need to retry these SCSI requests, before SCSI has fully dispatched them, due to a lower level SCSI driver's resource limitation identified in scsi_queue_rq(). Currently SCSI's per-request private data is leaked when the upper layer driver (dm-rq) frees and then retries these requests in response to BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE returns from scsi_queue_rq(). This usecase is so specialized that it doesn't warrant training an existing blk-mq interface (e.g. blk_mq_free_request) to allow SCSI to account for freeing its driver private data -- doing so would add an extra branch for handling a special case that all other consumers of SCSI (and blk-mq) won't ever need to worry about. So the most pragmatic way forward is to delegate freeing SCSI driver private data to the upper layer driver (dm-rq). Do so by adding new .cleanup_rq callback and calling a new blk_mq_cleanup_rq() method from dm-rq. A following commit will implement the .cleanup_rq() hook in scsi_mq_ops. Cc: Ewan D. Milne <emilne@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: <stable@vger.kernel.org> Fixes: 396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-30dm table: fix various whitespace issues with recent DAX codeMike Snitzer1-7/+7
Also, rename device_synchronous to device_dax_synchronous. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-30dm table: fix dax_dev NULL dereference in device_synchronous()Pankaj Gupta1-1/+1
If a device doesn't support DAX its 'dax_dev' is NULL. Fix device_synchronous() to first check if dax_dev is NULL before dereferencing it. Fixes: 2e9ee0955d3c ("dm: enable synchronous dax") Reported-by: jencce.kernel@gmail.com Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-26Merge tag 'for-linus-20190726' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+3
Pull block fixes from Jens Axboe: - Several io_uring fixes/improvements: - Blocking fix for O_DIRECT (me) - Latter page slowness for registered buffers (me) - Fix poll hang under certain conditions (me) - Defer sequence check fix for wrapped rings (Zhengyuan) - Mismatch in async inc/dec accounting (Zhengyuan) - Memory ordering issue that could cause stall (Zhengyuan) - Track sequential defer in bytes, not pages (Zhengyuan) - NVMe pull request from Christoph - Set of hang fixes for wbt (Josef) - Redundant error message kill for libahci (Ding) - Remove unused blk_mq_sched_started_request() and related ops (Marcos) - drbd dynamic alloc shash descriptor to reduce stack use (Arnd) - blkcg ->pd_stat() non-debug print (Tejun) - bcache memory leak fix (Wei) - Comment fix (Akinobu) - BFQ perf regression fix (Paolo) * tag 'for-linus-20190726' of git://git.kernel.dk/linux-block: (24 commits) io_uring: ensure ->list is initialized for poll commands Revert "nvme-pci: don't create a read hctx mapping without read queues" nvme: fix multipath crash when ANA is deactivated nvme: fix memory leak caused by incorrect subsystem free nvme: ignore subnqn for ADATA SX6000LNP drbd: dynamically allocate shash descriptor block: blk-mq: Remove blk_mq_sched_started_request and started_request bcache: fix possible memory leak in bch_cached_dev_run() io_uring: track io length in async_list based on bytes io_uring: don't use iov_iter_advance() for fixed buffers block: properly handle IOCB_NOWAIT for async O_DIRECT IO blk-mq: allow REQ_NOWAIT to return an error inline io_uring: add a memory barrier before atomic_read rq-qos: use a mb for got_token rq-qos: set ourself TASK_UNINTERRUPTIBLE after we schedule rq-qos: don't reset has_sleepers on spurious wakeups rq-qos: fix missed wake-ups in rq_qos_throttle wait: add wq_has_single_sleeper helper block, bfq: check also in-flight I/O in dispatch plugging block: fix sysfs module parameters directory path in comment ...
2019-07-22bcache: fix possible memory leak in bch_cached_dev_run()Wei Yongjun1-0/+3
memory malloced in bch_cached_dev_run() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: 0b13efecf5f2 ("bcache: add return value check to bch_cached_dev_run()") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-18Merge tag 'for-5.3/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds4-34/+62
Pull more device mapper updates from Mike Snitzer: - Fix zone state management race in DM zoned target by eliminating the unnecessary DMZ_ACTIVE state. - A couple fixes for issues the DM snapshot target's optional discard support added during first week of the 5.3 merge. - Increase default size of outstanding IO that is allowed for a each dm-kcopyd client and introduce tunable to allow user adjust. - Update DM core to use printk ratelimiting functions rather than duplicate them and in doing so fix an issue where DMDEBUG_LIMIT() rate limited KERN_DEBUG messages had excessive "callbacks suppressed" messages. * tag 'for-5.3/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: use printk ratelimiting functions dm kcopyd: Increase default sub-job size to 512KB dm snapshot: fix oversights in optional discard support dm zoned: fix zone state management race
2019-07-18Merge tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds3-9/+25
Pull libnvdimm updates from Dan Williams: "Primarily just the virtio_pmem driver: - virtio_pmem The new virtio_pmem facility introduces a paravirtualized persistent memory device that allows a guest VM to use DAX mechanisms to access a host-file with host-page-cache. It arranges for MAP_SYNC to be disabled and instead triggers a host fsync() when a 'write-cache flush' command is sent to the virtual disk device. - Miscellaneous small fixups" * tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: virtio_pmem: fix sparse warning xfs: disable map_sync for async flush ext4: disable map_sync for async flush dax: check synchronous mapping is supported dm: enable synchronous dax libnvdimm: add dax_dev sync flag virtio-pmem: Add virtio pmem driver libnvdimm: nd_region flush callback support libnvdimm, namespace: Drop uuid_t implementation detail
2019-07-17dm kcopyd: Increase default sub-job size to 512KBNikos Tsironis1-6/+28
Currently, kcopyd has a sub-job size of 64KB and a maximum number of 8 sub-jobs. As a result, for any kcopyd job, we have a maximum of 512KB of I/O in flight. This upper limit to the amount of in-flight I/O under-utilizes fast devices and results in decreased throughput, e.g., when writing to a snapshotted thin LV with I/O size less than the pool's block size (so COW is performed using kcopyd). Increase kcopyd's default sub-job size to 512KB, so we have a maximum of 4MB of I/O in flight for each kcopyd job. This results in an up to 96% improvement of bandwidth when writing to a snapshotted thin LV, with I/O sizes less than the pool's block size. Also, add dm_mod.kcopyd_subjob_size_kb module parameter to allow users to fine tune the sub-job size of kcopyd. The default value of this parameter is 512KB and the maximum allowed value is 1024KB. We evaluate the performance impact of the change by running the snap_breaking_throughput benchmark, from the device mapper test suite [1]. The benchmark: 1. Creates a 1G thin LV 2. Provisions the thin LV 3. Takes a snapshot of the thin LV 4. Writes to the thin LV with: dd if=/dev/zero of=/dev/vg/thin_lv oflag=direct bs=<I/O size> Running this benchmark with various thin pool block sizes and dd I/O sizes (all combinations triggering the use of kcopyd) we get the following results: +-----------------+-------------+------------------+-----------------+ | Pool block size | dd I/O size | BW before (MB/s) | BW after (MB/s) | +-----------------+-------------+------------------+-----------------+ | 1 MB | 256 KB | 242 | 280 | | 1 MB | 512 KB | 238 | 295 | | | | | | | 2 MB | 256 KB | 238 | 354 | | 2 MB | 512 KB | 241 | 380 | | 2 MB | 1 MB | 245 | 394 | | | | | | | 4 MB | 256 KB | 248 | 412 | | 4 MB | 512 KB | 234 | 432 | | 4 MB | 1 MB | 251 | 474 | | 4 MB | 2 MB | 257 | 504 | | | | | | | 8 MB | 256 KB | 239 | 420 | | 8 MB | 512 KB | 256 | 431 | | 8 MB | 1 MB | 264 | 467 | | 8 MB | 2 MB | 264 | 502 | | 8 MB | 4 MB | 281 | 537 | +-----------------+-------------+------------------+-----------------+ [1] https://github.com/jthornber/device-mapper-test-suite Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.