aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/md (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-08-18md/raid10: fix problem with on-stack allocation of r10bio structure.NeilBrown2-12/+20
A 'struct r10bio' has an array of per-copy information at the end. This array is declared with size [0] and r10bio_pool_alloc allocates enough extra space to store the per-copy information depending on the number of copies needed. So declaring a 'struct r10bio on the stack isn't going to work. It won't allocate enough space, and memory corruption will ensue. So in the two places where this is done, declare a sufficiently large structure and use that instead. The two call-sites of this bug were introduced in 3.4 and 3.5 so this is suitable for both those kernels. The patch will have to be modified for 3.4 as it only has one bug. Cc: stable@vger.kernel.org Reported-by: Ivan Vasilyev <ivan.vasilyev@gmail.com> Tested-by: Ivan Vasilyev <ivan.vasilyev@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-16md: Don't truncate size at 4TB for RAID0 and LinearNeilBrown1-3/+6
commit 27a7b260f71439c40546b43588448faac01adb93 md: Fix handling for devices from 2TB to 4TB in 0.90 metadata. changed 0.90 metadata handling to truncated size to 4TB as that is all that 0.90 can record. However for RAID0 and Linear, 0.90 doesn't need to record the size, so this truncation is not needed and causes working arrays to become too small. So avoid the truncation for RAID0 and Linear This bug was introduced in 3.1 and is suitable for any stable kernels from then onwards. As the offending commit was tagged for 'stable', any stable kernel that it was applied to should also get this patch. That includes at least 2.6.32, 2.6.33 and 3.0. (Thanks to Ben Hutchings for providing that list). Cc: stable@vger.kernel.org Signed-off-by: Neil Brown <neilb@suse.de>
2012-08-02Merge tag 'md-3.6' of git://neil.brown.name/mdLinus Torvalds5-22/+150
Pull additional md update from NeilBrown: "This contains a few patches that depend on plugging changes in the block layer so needed to wait for those. It also contains a Kconfig fix for the new RAID10 support in dm-raid." * tag 'md-3.6' of git://neil.brown.name/md: md/dm-raid: DM_RAID should select MD_RAID10 md/raid1: submit IO from originating thread instead of md thread. raid5: raid5d handle stripe in batch way raid5: make_request use batch stripe release
2012-08-02md/dm-raid: DM_RAID should select MD_RAID10NeilBrown1-2/+3
Now that DM_RAID supports raid10, it needs to select that code to ensure it is included. Cc: Jonathan Brassow <jbrassow@redhat.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-02md/raid1: submit IO from originating thread instead of md thread.NeilBrown2-4/+55
queuing writes to the md thread means that all requests go through the one processor which may not be able to keep up with very high request rates. So use the plugging infrastructure to submit all requests on unplug. If a 'schedule' is needed, we fall back on the old approach of handing the requests to the thread for it to handle. Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-02raid5: raid5d handle stripe in batch wayShaohua Li1-13/+32
Let raid5d handle stripe in batch way to reduce conf->device_lock locking. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-02raid5: make_request use batch stripe releaseShaohua Li2-3/+60
make_request() does stripe release for every stripe and the stripe usually has count 1, which makes previous release_stripe() optimization not work. In my test, this release_stripe() becomes the heaviest pleace to take conf->device_lock after previous patches applied. Below patch makes stripe release batch. All the stripes will be released in unplug. The STRIPE_ON_UNPLUG_LIST bit is to protect concurrent access stripe lru. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-01Merge branch 'for-3.6/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds5-65/+16
Pull block driver changes from Jens Axboe: - Making the plugging support for drivers a bit more sane from Neil. This supersedes the plugging change from Shaohua as well. - The usual round of drbd updates. - Using a tail add instead of a head add in the request completion for ndb, making us find the most completed request more quickly. - A few floppy changes, getting rid of a duplicated flag and also running the floppy init async (since it takes forever in boot terms) from Andi. * 'for-3.6/drivers' of git://git.kernel.dk/linux-block: floppy: remove duplicated flag FD_RAW_NEED_DISK blk: pass from_schedule to non-request unplug functions. block: stack unplug blk: centralize non-request unplug handling. md: remove plug_cnt feature of plugging. block/nbd: micro-optimization in nbd request completion drbd: announce FLUSH/FUA capability to upper layers drbd: fix max_bio_size to be unsigned drbd: flush drbd work queue before invalidate/invalidate remote drbd: fix potential access after free drbd: call local-io-error handler early drbd: do not reset rs_pending_cnt too early drbd: reset congestion information before reporting it in /proc/drbd drbd: report congestion if we are waiting for some userland callback drbd: differentiate between normal and forced detach drbd: cleanup, remove two unused global flags floppy: Run floppy initialization asynchronous
2012-08-01Merge branch 'for-next' of git://neil.brown.name/mdLinus Torvalds8-219/+400
Pull md updates from NeilBrown. * 'for-next' of git://neil.brown.name/md: DM RAID: Add support for MD RAID10 md/RAID1: Add missing case for attempting to repair known bad blocks. md/raid5: For odirect-write performance, do not set STRIPE_PREREAD_ACTIVE. md/raid1: don't abort a resync on the first badblock. md: remove duplicated test on ->openers when calling do_md_stop() raid5: Add R5_ReadNoMerge flag which prevent bio from merging at block layer md/raid1: prevent merging too large request md/raid1: read balance chooses idlest disk for SSD md/raid1: make sequential read detection per disk based MD RAID10: Export md_raid10_congested MD: Move macros from raid1*.h to raid1*.c MD RAID1: rename mirror_info structure MD RAID10: rename mirror_info structure MD RAID10: Fix compiler warning. raid5: add a per-stripe lock raid5: remove unnecessary bitmap write optimization raid5: lockless access raid5 overrided bi_phys_segments raid5: reduce chance release_stripe() taking device_lock
2012-08-01DM RAID: Add support for MD RAID10Jonathan Brassow1-5/+90
Support the MD RAID10 personality through dm-raid.c Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-08-01Merge commit 'c039c332f23e794deb6d6f37b9f07ff3b27fb2cf' into mdNeilBrown18-687/+280
Pull in pre-requisites for adding raid10 support to dm-raid.
2012-07-31blk: pass from_schedule to non-request unplug functions.NeilBrown2-2/+2
This will allow md/raid to know why the unplug was called, and will be able to act according - if !from_schedule it is safe to perform tasks which could themselves schedule. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-07-31blk: centralize non-request unplug handling.NeilBrown2-52/+12
Both md and umem has similar code for getting notified on an blk_finish_plug event. Centralize this code in block/ and allow each driver to provide its distinctive difference. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-07-31md: remove plug_cnt feature of plugging.NeilBrown5-14/+5
This seemed like a good idea at the time, but after further thought I cannot see it making a difference other than very occasionally and testing to try to exercise the case it is most likely to help did not show any performance difference by removing it. So remove the counting of active plugs and allow 'pending writes' to be activated at any time, not just when no plugs are active. This is only relevant when there is a write-intent bitmap, and the updating of the bitmap will likely introduce enough delay that the single-threading of bitmap updates will be enough to collect large numbers of updates together. Removing this will make it easier to centralise the unplug code, and will clear the other for other unplug enhancements which have a measurable effect. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-07-31md/RAID1: Add missing case for attempting to repair known bad blocks.Alexander Lyakas1-0/+12
When doing resync or repair, attempt to correct bad blocks, according to WriteErrorSeen policy Signed-off-by: Alex Lyakas <alex.bolshoy@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-30Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds1-11/+2
Merge Andrew's first set of patches: "Non-MM patches: - lots of misc bits - tree-wide have_clk() cleanups - quite a lot of printk tweaks. I draw your attention to "printk: convert the format for KERN_<LEVEL> to a 2 byte pattern" which looks a bit scary. But afaict it's solid. - backlight updates - lib/ feature work (notably the addition and use of memweight()) - checkpatch updates - rtc updates - nilfs updates - fatfs updates (partial, still waiting for acks) - kdump, proc, fork, IPC, sysctl, taskstats, pps, etc - new fault-injection feature work" * Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits) drivers/misc/lkdtm.c: fix missing allocation failure check lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table() fault-injection: add tool to run command with failslab or fail_page_alloc fault-injection: add selftests for cpu and memory hotplug powerpc: pSeries reconfig notifier error injection module memory: memory notifier error injection module PM: PM notifier error injection module cpu: rewrite cpu-notifier-error-inject module fault-injection: notifier error injection c/r: fcntl: add F_GETOWNER_UIDS option resource: make sure requested range is included in the root range include/linux/aio.h: cpp->C conversions fs: cachefiles: add support for large files in filesystem caching pps: return PTR_ERR on error in device_create taskstats: check nla_reserve() return sysctl: suppress kmemleak messages ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION ipc: compat: use signed size_t types for msgsnd and msgrcv ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC ipc: add COMPAT_SHMLBA support ...
2012-07-30dm: use memweight()Akinobu Mita1-11/+2
Use memweight() to count the total number of bits set in memory area. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Alasdair Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31md/raid5: For odirect-write performance, do not set STRIPE_PREREAD_ACTIVE.majianpeng1-1/+1
'sync' writes set both REQ_SYNC and REQ_NOIDLE. O_DIRECT writes set REQ_SYNC but not REQ_NOIDLE. We currently assume that a REQ_SYNC request will not be followed by more requests and so set STRIPE_PREREAD_ACTIVE to expedite the request. This is appropriate for sync requests, but not for O_DIRECT requests. So make the setting of STRIPE_PREREAD_ACTIVE conditional on REQ_NOIDLE rather than REQ_SYNC. This is consistent with the documented meaning of REQ_NOIDLE: __REQ_NOIDLE, /* don't anticipate more IO after this one */ Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31md/raid1: don't abort a resync on the first badblock.NeilBrown1-1/+4
If a resync of a RAID1 array with 2 devices finds a known bad block one device it will neither read from, or write to, that device for this block offset. So there will be one read_target (The other device) and zero write targets. This condition causes md/raid1 to abort the resync assuming that it has finished - without known bad blocks this would be true. When there are no write targets because of the presence of bad blocks we should only skip over the area covered by the bad block. RAID10 already gets this right, raid1 doesn't. Or didn't. As this can cause a 'sync' to abort early and appear to have succeeded it could lead to some data corruption, so it suitable for -stable. Cc: stable@vger.kernel.org Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31md: remove duplicated test on ->openers when calling do_md_stop()NeilBrown1-6/+2
do_md_stop tests mddev->openers while holding ->open_mutex, and fails if this count is too high. So callers do not need to check mddev->openers and doing so isn't very meaningful as they don't hold ->open_mutex so the number could change. So remove the unnecessary tests on mddev->openers. These are not called often enough for there to be any gain in an early test on ->open_mutex to avoid the need for a slightly more costly mutex_lock call. Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31raid5: Add R5_ReadNoMerge flag which prevent bio from merging at block layermajianpeng2-2/+13
Because bios will merge at block-layer,so bios-error may caused by other bio which be merged into to the same request. Using this flag,it will find exactly error-sector and not do redundant operation like re-write and re-read. V0->V1:Using REQ_FLUSH instead REQ_NOMERGE avoid bio merging at block layer. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31md/raid1: prevent merging too large requestShaohua Li2-7/+50
For SSD, if request size exceeds specific value (optimal io size), request size isn't important for bandwidth. In such condition, if making request size bigger will cause some disks idle, the total throughput will actually drop. A good example is doing a readahead in a two-disk raid1 setup. So when should we split big requests? We absolutly don't want to split big request to very small requests. Even in SSD, big request transfer is more efficient. This patch only considers request with size above optimal io size. If all disks are busy, is it worth doing a split? Say optimal io size is 16k, two requests 32k and two disks. We can let each disk run one 32k request, or split the requests to 4 16k requests and each disk runs two. It's hard to say which case is better, depending on hardware. So only consider case where there are idle disks. For readahead, split is always better in this case. And in my test, below patch can improve > 30% thoughput. Hmm, not 100%, because disk isn't 100% busy. Such case can happen not just in readahead, for example, in directio. But I suppose directio usually will have bigger IO depth and make all disks busy, so I ignored it. Note: if the raid uses any hard disk, we don't prevent merging. That will make performace worse. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31md/raid1: read balance chooses idlest disk for SSDShaohua Li1-3/+31
SSD hasn't spindle, distance between requests means nothing. And the original distance based algorithm sometimes can cause severe performance issue for SSD raid. Considering two thread groups, one accesses file A, the other access file B. The first group will access one disk and the second will access the other disk, because requests are near from one group and far between groups. In this case, read balance might keep one disk very busy but the other relative idle. For SSD, we should try best to distribute requests to as many disks as possible. There isn't spindle move penality anyway. With below patch, I can see more than 50% throughput improvement sometimes depending on workloads. The only exception is small requests can be merged to a big request which typically can drive higher throughput for SSD too. Such small requests are sequential reads. Unlike hard disk, sequential read which can't be merged (for example direct IO, or read without readahead) can be ignored for SSD. Again there is no spindle move penality. readahead dispatches small requests and such requests can be merged. Last patch can help detect sequential read well, at least if concurrent read number isn't greater than raid disk number. In that case, distance based algorithm doesn't work well too. V2: For hard disk and SSD mixed raid, doesn't use distance based algorithm for random IO too. This makes the algorithm generic for raid with SSD. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31md/raid1: make sequential read detection per disk basedShaohua Li2-34/+12
Currently the sequential read detection is global wide. It's natural to make it per disk based, which can improve the detection for concurrent multiple sequential reads. And next patch will make SSD read balance not use distance based algorithm, where this change help detect truly sequential read for SSD. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31MD RAID10: Export md_raid10_congestedJonathan Brassow2-22/+37
md/raid10: Export is_congested test. In similar fashion to commits 11d8a6e3719519fbc0e2c9d61b6fa931b84bf813 1ed7242e591af7e233234d483f12d33818b189d9 we export the RAID10 congestion checking function so that dm-raid.c can make use of it and make use of the personality. The 'queue' and 'gendisk' structures will not be available to the MD code when device-mapper sets up the device, so we conditionalize access to these fields also. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31MD: Move macros from raid1*.h to raid1*.cJonathan Brassow4-29/+29
MD RAID1/RAID10: Move some macros from .h file to .c file There are three macros (IO_BLOCKED,IO_MADE_GOOD,BIO_SPECIAL) which are defined in both raid1.h and raid10.h. They are only used in there respective .c files. However, if we wish to make RAID10 accessible to the device-mapper RAID target (dm-raid.c), then we need to move these macros into the .c files where they are used so that they do not conflict with each other. The macros from the two files are identical and could be moved into md.h, but I chose to leave the duplication and have them remain in the personality files. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31MD RAID1: rename mirror_info structureJonathan Brassow2-9/+9
MD RAID1: Rename the structure 'mirror_info' to 'raid1_info' The same structure name ('mirror_info') is used by raid10. Each of these structures are defined in there respective header files. If dm-raid is to support both RAID1 and RAID10, the header files will be included and the structure names must not collide. While only one of these structure names needs to change, this patch adds consistency to the naming of the structure. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31MD RAID10: rename mirror_info structureJonathan Brassow2-12/+12
MD RAID10: Rename the structure 'mirror_info' to 'raid10_info' The same structure name ('mirror_info') is used by raid1. Each of these structures are defined in there respective header files. If dm-raid is to support both RAID1 and RAID10, the header files will be included and the structure names must not collide. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-31MD RAID10: Fix compiler warning.Jonathan Brassow1-1/+1
MD RAID10: Fix compiler warning. Initialize variable to prevent compiler warning. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-07-27dm thin: commit before gathering statusAlasdair G Kergon13-16/+29
Commit outstanding metadata before returning the status for a dm thin pool so that the numbers reported are as up-to-date as possible. The commit is not performed if the device is suspended or if the DM_NOFLUSH_FLAG is supplied by userspace and passed to the target through a new 'status_flags' parameter in the target's dm_status_fn. The userspace dmsetup tool will support the --noflush flag with the 'dmsetup status' and 'dmsetup wait' commands from version 1.02.76 onwards. Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin: add read only and fail io modesJoe Thornber1-95/+321
Add read-only and fail-io modes to thin provisioning. If a transaction commit fails the pool's metadata device will transition to "read-only" mode. If a commit fails once already in read-only mode the transition to "fail-io" mode occurs. Once in fail-io mode the pool and all associated thin devices will report a status of "Fail". Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: introduce dm_pool_abort_metadataJoe Thornber2-61/+158
Introduce dm_pool_abort_metadata to abort the current metadata transaction. Generally this will only be called when bad things are happening and dm-thin is trying to roll back to a good state for read-only mode. It's complicated by the fact that the metadata device may have failed completely causing the abort to be unable to read the old transaction. In this case the metadata object is placed in a 'fail' mode and everything fails apart from destroying it. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: introduce dm_pool_metadata_set_read_onlyJoe Thornber2-4/+22
Introduce dm_pool_metadata_set_read_only to put the underlying block manager into read-only mode. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm persistent data: introduce dm_bm_set_read_onlyJoe Thornber2-0/+31
Introduce dm_bm_set_read_only to switch the block manager into a read-only mode. To be used when dm-thin degrades due to io errors on the metadata device. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin: reduce number of metadata commitsJoe Thornber1-1/+7
Reduce the number of metadata commits by using dm_thin_changed_this_transaction to check if metadata was changed on a per thin device granularity. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: add dm_thin_changed_this_transactionJoe Thornber2-3/+15
Introduce dm_thin_changed_this_transaction to dm-thin-metadata to publish a useful bit of information we're already tracking. This will help dm thin decide when to commit. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: add format option to dm_pool_metadata_openJoe Thornber3-10/+12
Add a parameter to dm_pool_metadata_open to indicate whether or not an unformatted metadata area should be formatted. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: tidy up open and format error pathsJoe Thornber1-22/+21
Tidy up error path in __open_metadata and __format_metadata in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: only check incompat features on openMike Snitzer1-26/+36
Factor out __check_incompat_features and only call it once when we open the metadata device rather than at the beginning of every transaction. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: remove duplicate pmd initialisationJoe Thornber1-5/+0
Remove some duplicate initialisation of struct dm_pool_metadata. These pmd fields are initialised by both: __format_metadata's calls to dm_btree_empty __write_initial_superblock + __begin_transaction Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: remove create parameter from __create_persistent_data_objectsJoe Thornber1-10/+7
Remove 'create' parameter from __create_persistent_data_objects() in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: move __superblock_all_zeroes to __open_or_format_metadataJoe Thornber1-9/+9
Move the check for __superblock_all_zeroes from __create_persistent_data_objects() down to __open_or_format_metadata in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: remove nr_blocks arg from __create_persistent_data_objectsJoe Thornber1-7/+7
Remove nr_blocks arg from __create_persistent_data_objects in dm-thin-metadata. It was always passed as zero. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: split __open or format metadataJoe Thornber1-50/+74
Split __open_or_format_metadata into __format_metadata and __open_metadata in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: use struct dm_pool_metadata members in __open_or_format_metadataJoe Thornber1-23/+17
Clean up __open_or_format_metadata in dm-thin-metadata by using struct dm_pool_metadata members to replace local variables. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: zero unused superblock uuidJoe Thornber1-0/+1
Zero the unused uuid when initialising the metadata superblock. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: lift __begin_transaction out of __write_initial_superblockJoe Thornber1-13/+6
Lift the call to __begin_transaction out of __write_initial_superblock in dm-thin-metadata. Called higher up the call chain now. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: move dm_commit_pool_metadata into __write_initial_superblockJoe Thornber1-6/+38
Move dm_commit_pool_metadata inline into __write_initial_superblock in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: factor out __write_initial_superblockJoe Thornber1-51/+58
Factor out __write_initial_superblock and also pull some other initial creation code out of dm_pool_metadata_open. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-07-27dm thin metadata: lift some initialisation out of __open_or_format_metadataJoe Thornber1-4/+4
Lift some initialisation out of __open_or_format_metadata in dm-thin-metadata. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.