aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/v4l2-core (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-09-11Merge tag 'media/v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds6-407/+132
Pull media updates from Mauro Carvalho Chehab: "A series of patches that move part of the code used to allocate memory from the media subsystem to the mm subsystem" [ The mm parts have been acked by VM people, and the series was apparently in -mm for a while - Linus ] * tag 'media/v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames() [media] media: vb2: Remove unused functions [media] media: vb2: Convert vb2_dc_get_userptr() to use frame vector [media] media: vb2: Convert vb2_vmalloc_get_userptr() to use frame vector [media] media: vb2: Convert vb2_dma_sg_get_userptr() to use frame vector [media] vb2: Provide helpers for mapping virtual addresses [media] media: omap_vout: Convert omap_vout_uservirt_to_phys() to use get_vaddr_pfns() [media] mm: Provide new get_vaddr_frames() helper [media] vb2: Push mmap_sem down to memops
2015-09-05Merge tag 'media/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds10-60/+127
Pull media updates from Mauro Carvalho Chehab: - new DVB frontend drivers: ascot2e, cxd2841er, horus3a, lnbh25 - new HDMI capture driver: tc358743 - new driver for NetUP DVB new boards (netup_unidvb) - IR support for DVBSky cards (smipcie-ir) - Coda driver has gain macroblock tiling support - Renesas R-Car gains JPEG codec driver - new DVB platform driver for STi boards: c8sectpfe - added documentation for the media core kABI to device-drivers DocBook - lots of driver fixups, cleanups and improvements * tag 'media/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (297 commits) [media] c8sectpfe: Remove select on undefined LIBELF_32 [media] i2c: fix platform_no_drv_owner.cocci warnings [media] cx231xx: Use wake_up_interruptible() instead of wake_up_interruptible_nr() [media] tc358743: only queue subdev notifications if devnode is set [media] tc358743: add missing Kconfig dependency/select [media] c8sectpfe: Use %pad to print 'dma_addr_t' [media] DocBook media: Fix typo "the the" in xml files [media] tc358743: make reset gpio optional [media] tc358743: set direction of reset gpio using devm_gpiod_get [media] dvbdev: document most of the functions/data structs [media] dvb_frontend.h: document the struct dvb_frontend [media] dvb-frontend.h: document struct dtv_frontend_properties [media] dvb-frontend.h: document struct dvb_frontend_ops [media] dvb: Use DVBFE_ALGO_HW where applicable [media] dvb_frontend.h: document struct analog_demod_ops [media] dvb_frontend.h: Document struct dvb_tuner_ops [media] Docbook: Document struct analog_parameters [media] dvb_frontend.h: get rid of dvbfe_modcod [media] add documentation for struct dvb_tuner_info [media] dvb_frontend: document dvb_frontend_tune_settings ...
2015-09-01Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-1/+1
Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree for 4.3 (kerneldoc updates, printk() fixes, Documentation and MAINTAINERS updates)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) MAINTAINERS: update my e-mail address mod_devicetable: add space before */ scsi: a100u2w: trivial typo in printk i2c: Fix typo in i2c-bfin-twi.c treewide: fix typos in comment blocks Doc: fix trivial typo in SubmittingPatches proportions: Spelling s/consitent/consistent/ dm: Spelling s/consitent/consistent/ aic7xxx: Fix typo in error message pcmcia: Fix typo in locking documentation scsi/arcmsr: Fix typos in error log drm/nouveau/gr: Fix typo in nv10.c [SCSI] Fix printk typos in drivers/scsi staging: comedi: Grammar s/Enable support a/Enable support for a/ Btrfs: Spelling s/consitent/consistent/ README: GTK+ is a acronym ASoC: omap: Fix typo in config option description mm: tlb.c: Fix error message ntfs: super.c: Fix error log fix typo in Documentation/SubmittingPatches ...
2015-08-21Merge tag 'media/v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds1-15/+25
Pull media fixes from Mauro Carvalho Chehab: - a regression fix at the videobuf2 core driver - fix error handling at mantis probing code - revert the IR encode patches, as the API is not mature enough. So, better to postpone the changes to a latter Kernel - fix Kconfig breakages on some randconfig scenarios. * tag 'media/v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] mantis: Fix error handling in mantis_dma_init() Revert "[media] rc: rc-ir-raw: Add scancode encoder callback" Revert "[media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper" Revert "[media] rc: ir-rc5-decoder: Add encode capability" Revert "[media] rc: ir-rc6-decoder: Add encode capability" Revert "[media] rc: rc-core: Add support for encode_wakeup drivers" Revert "[media] rc: rc-loopback: Add loopback of filter scancodes" Revert "[media] rc: nuvoton-cir: Add support for writing wakeup samples via sysfs filter callback" [media] vb2: Fix compilation breakage when !CONFIG_BUG [media] vb2: Only requeue buffers immediately once streaming is started [media] media/pci/cobalt: fix Kconfig and build when SND is not enabled [media] media/dvb: fix ts2020.c Kconfig and build
2015-08-16[media] media: vb2: Remove unused functionsJan Kara1-114/+0
Conversion to the use of pinned pfns made some functions unused. Remove them. Also there's no need to lock mmap_sem in __buf_prepare() anymore. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-16[media] media: vb2: Convert vb2_dc_get_userptr() to use frame vectorJan Kara1-178/+34
Convert vb2_dc_get_userptr() to use frame vector infrastructure. When we are doing that there's no need to allocate page array and some code can be simplified. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-16[media] media: vb2: Convert vb2_vmalloc_get_userptr() to use frame vectorJan Kara1-56/+36
Convert vb2_vmalloc_get_userptr() to use frame vector infrastructure. When we are doing that there's no need to allocate page array and some code can be simplified. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-16[media] media: vb2: Convert vb2_dma_sg_get_userptr() to use frame vectorJan Kara1-80/+15
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-16[media] vb2: Provide helpers for mapping virtual addressesJan Kara2-0/+59
Provide simple helper functions to map virtual address range into an array of pfns / pages. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-16[media] vb2: Push mmap_sem down to memopsJan Kara4-3/+12
Currently vb2 core acquires mmap_sem just around call to __qbuf_userptr(). However since commit f035eb4e976ef5 (videobuf2: fix lockdep warning) it isn't necessary to acquire it so early as we no longer have to drop queue mutex before acquiring mmap_sem. So push acquisition of mmap_sem down into .get_userptr memop so that the semaphore is acquired for a shorter time and it is clearer what it is needed for. Note that we also need mmap_sem in .put_userptr memop since that ends up calling vb2_put_vma() which calls vma->vm_ops->close() which should be called with mmap_sem held. However we didn't hold mmap_sem in some code paths anyway (e.g. when called via vb2_ioctl_reqbufs() -> __vb2_queue_free() -> vb2_dma_sg_put_userptr()) and getting mmap_sem in put_userptr() introduces a lock inversion with queue->mmap_lock in the above mentioned call path. Luckily this whole locking mess will get resolved once we convert videobuf2 core to the new mm helper which avoids the need for mmap_sem in .put_userptr memop altogether. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] Drop owner assignment from i2c_driverKrzysztof Kozlowski1-1/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] v4l2: move tracepoint generation into separate filePhilipp Zabel3-1/+14
To compile videobuf2-core as a module, the vb2_* tracepoints must be exported from the videodev module. Instead of exporting vb2 tracepoint symbols from v4l2-ioctl.c, move the tracepoint generation into a separate file. This patch fixes the following build error in the modpost stage, introduced by 2091f5181c66 ("[media] videobuf2: add trace events"): ERROR: "__tracepoint_vb2_buf_done" undefined! ERROR: "__tracepoint_vb2_dqbuf" undefined! ERROR: "__tracepoint_vb2_qbuf" undefined! ERROR: "__tracepoint_vb2_buf_queue" undefined! Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] v4l2-ioctl: Give more information when device_caps are missingLaura Abbott1-2/+3
Currently, the warning for missing device_caps gives a backtrace like so: [<ffffffff8175c199>] dump_stack+0x45/0x57 [<ffffffff8109ad5a>] warn_slowpath_common+0x8a/0xc0 [<ffffffff8109ae8a>] warn_slowpath_null+0x1a/0x20 [<ffffffffa0237453>] v4l_querycap+0x43/0x80 [videodev] [<ffffffffa0237734>] __video_do_ioctl+0x2a4/0x320 [videodev] [<ffffffff812207e5>] ? do_last+0x195/0x1210 [<ffffffffa023a11e>] video_usercopy+0x22e/0x5b0 [videodev] [<ffffffffa0237490>] ? v4l_querycap+0x80/0x80 [videodev] [<ffffffffa023a4b5>] video_ioctl2+0x15/0x20 [videodev] [<ffffffffa0233733>] v4l2_ioctl+0x113/0x150 [videodev] [<ffffffff81225798>] do_vfs_ioctl+0x2f8/0x4f0 [<ffffffff8113b2d4>] ? __audit_syscall_entry+0xb4/0x110 [<ffffffff81022d7c>] ? do_audit_syscall_entry+0x6c/0x70 [<ffffffff81225a11>] SyS_ioctl+0x81/0xa0 [<ffffffff8113b526>] ? __audit_syscall_exit+0x1f6/0x2a0 [<ffffffff81763549>] system_call_fastpath+0x12/0x17 This indicates that device_caps are missing but doesn't give much of a clue which driver is actually at fault. Improve the warning output by showing the capabilities and the responsible driver. Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11[media] v4l2-mem2mem: drop lock in v4l2_m2m_fop_mmapHans Verkuil1-11/+1
The v4l2_m2m_fop_mmap function takes the core mutex, but this will result in a potential circular locking dependency: [ 262.517164] ====================================================== [ 262.517166] [ INFO: possible circular locking dependency detected ] [ 262.517169] 4.2.0-rc2-koryphon #844 Not tainted [ 262.517171] ------------------------------------------------------- [ 262.517173] v4l2-compliance/1379 is trying to acquire lock: [ 262.517175] (&dev->dev_mutex){+.+.+.}, at: [<ffffffffa000ddab>] v4l2_m2m_fop_mmap+0x2b/0x90 [v4l2_mem2mem] [ 262.517187] but task is already holding lock: [ 262.517189] (&mm->mmap_sem){++++++}, at: [<ffffffff81159309>] vm_mmap_pgoff+0x69/0xc0 [ 262.517199] which lock already depends on the new lock. [ 262.517202] the existing dependency chain (in reverse order) is: [ 262.517204] -> #1 (&mm->mmap_sem){++++++}: [ 262.517209] [<ffffffff810d0e6b>] __lock_acquire+0x62b/0xe80 [ 262.517215] [<ffffffff810d2095>] lock_acquire+0x65/0x90 [ 262.517218] [<ffffffff811612e5>] __might_fault+0x75/0xa0 [ 262.517222] [<ffffffffa06dead9>] video_usercopy+0x3e9/0x4e0 [videodev] [ 262.517231] [<ffffffffa06debe0>] video_ioctl2+0x10/0x20 [videodev] [ 262.517238] [<ffffffffa06d8663>] v4l2_ioctl+0xc3/0xe0 [videodev] [ 262.517243] [<ffffffff811a8cac>] do_vfs_ioctl+0x2fc/0x550 [ 262.517248] [<ffffffff811a8f74>] SyS_ioctl+0x74/0x80 [ 262.517252] [<ffffffff81a4d2ee>] entry_SYSCALL_64_fastpath+0x12/0x76 [ 262.517258] -> #0 (&dev->dev_mutex){+.+.+.}: [ 262.517262] [<ffffffff810cf464>] validate_chain.isra.38+0xd04/0x1170 [ 262.517266] [<ffffffff810d0e6b>] __lock_acquire+0x62b/0xe80 [ 262.517270] [<ffffffff810d2095>] lock_acquire+0x65/0x90 [ 262.517273] [<ffffffff81a48e3c>] mutex_lock_interruptible_nested+0x6c/0x4b0 [ 262.517279] [<ffffffffa000ddab>] v4l2_m2m_fop_mmap+0x2b/0x90 [v4l2_mem2mem] [ 262.517284] [<ffffffffa06d80ff>] v4l2_mmap+0x4f/0x90 [videodev] [ 262.517288] [<ffffffff8116b06c>] mmap_region+0x38c/0x5b0 [ 262.517293] [<ffffffff8116b585>] do_mmap_pgoff+0x2f5/0x3e0 [ 262.517297] [<ffffffff8115932a>] vm_mmap_pgoff+0x8a/0xc0 [ 262.517300] [<ffffffff81169bab>] SyS_mmap_pgoff+0x1cb/0x270 [ 262.517304] [<ffffffff8100876d>] SyS_mmap+0x1d/0x20 [ 262.517309] [<ffffffff81a4d2ee>] entry_SYSCALL_64_fastpath+0x12/0x76 [ 262.517313] other info that might help us debug this: [ 262.517315] Possible unsafe locking scenario: [ 262.517318] CPU0 CPU1 [ 262.517319] ---- ---- [ 262.517321] lock(&mm->mmap_sem); [ 262.517324] lock(&dev->dev_mutex); [ 262.517327] lock(&mm->mmap_sem); [ 262.517329] lock(&dev->dev_mutex); [ 262.517332] *** DEADLOCK *** Since vb2_fop_mmap doesn't take the lock, neither should v4l2_m2m_fop_mmap. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-10[media] vb2: Fix compilation breakage when !CONFIG_BUGLaurent Pinchart1-7/+7
Commit 77a3c6fd90c9 ("[media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers") uses the __WARN() macro which isn't defined when CONFIG_BUG isn't set. This introduces a compilation breakage. Fix it by using WARN_ON() instead. The commit was also broken in that it merged v1 of the patch while a new v2 version had been submitted, reviewed and acked. Fix it by incorporating the changes from v1 to v2. Fixes: 77a3c6fd90c9 ("[media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-07treewide: fix typos in comment blocksMasahiro Yamada1-1/+1
Looks like the word "contiguous" is often mistyped. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-07-17[media] videobuf2: add trace eventsPhilipp Zabel1-0/+11
Add videobuf2 specific vb2_qbuf and vb2_dqbuf trace events that mirror the v4l2_qbuf and v4l2_dqbuf trace events, only they include additional information about queue fill state and are emitted right before the buffer is enqueued in the driver or userspace is woken up. This allows to make sense of the timeline of trace events in combination with others that might be triggered by __enqueue_in_driver. Also two new trace events vb2_buf_queue and vb2_buf_done are added, allowing to trace the handover between videobuf2 framework and driver. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] v4l2-mem2mem: set the queue owner field just as vb2_ioctl_reqbufs doesPhilipp Zabel1-1/+8
The queue owner will be used by videobuf2 trace events to determine and record the device minor number. It is set in v4l2_m2m_reqbufs instead of v4l2_m2m_ioctl_reqbufs because several drivers implement their own vidioc_reqbufs handlers that still call v4l2_m2m_reqbufs directly. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] Add helper function for subdev event notificationsLars-Peter Clausen1-0/+18
Add a new helper function called v4l2_subdev_notify_event() which will deliver the specified event to both the v4l2 subdev event queue as well as to the notify callback. The former is typically used by userspace applications to listen to notification events while the later is used by bridge drivers. Combining both into the same function avoids boilerplate code in subdev drivers. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] v4l2-event: v4l2_event_queue: do nothing if vdev == NULLHans Verkuil1-0/+3
If the vdev pointer == NULL, then just return. This makes it easier for subdev drivers to use this function without having to check if the sd->devnode pointer is NULL or not. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17[media] vb2: Only requeue buffers immediately once streaming is startedSakari Ailus1-8/+18
Buffers can be returned back to videobuf2 in driver's streamon handler. In this case vb2_buffer_done() with buffer state VB2_BUF_STATE_QUEUED will cause the driver's buf_queue vb2 operation to be called, queueing the same buffer again only to be returned to videobuf2 using vb2_buffer_done() and so on. Add a new buffer state VB2_BUF_STATE_REQUEUEING which, when used as the state argument to vb2_buffer_done(), will result in buffers queued to the driver. Using VB2_BUF_STATE_QUEUED will leave the buffer to videobuf2, as it was before "[media] vb2: allow requeuing buffers while streaming". Fixes: ce0eff016f72 ("[media] vb2: allow requeuing buffers while streaming") [mchehab@osg.samsung.com: fix warning: enumeration value 'VB2_BUF_STATE_REQUEUEING' not handled in switch] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v4.1 Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-06[media] v4l2-dv-timings: print refresh rate with better precisionPrashant Laddha1-3/+6
In many cases, refresh rate is not exact integer. In such cases, fraction was lost and it used to print, say, 59 in case of 59.94. Now, capturing the fraction up to 2 decimal places. Signed-off-by: Prashant Laddha <prladdha@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-06[media] media/v4l2-ctrls: Code cleanout validate_new()Ricardo Ribalda1-15/+0
We can simplify the code removing the if(). v4l2_ctr_new sets ctrls->elems to 1 when !ctrl->is_ptr. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-06[media] v4l2-dv-timings: log if the timing is reduced blanking V2Hans Verkuil1-1/+3
The last CVT standard introduced reduced blanking version 2 which is signaled by a vsync of 8. Log this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-06[media] v4l2-dv-timings: add support for reduced blanking v2Prashant Laddha1-21/+59
Added support for reduced blanking version 2 (RB v2) in cvt timings. Standard specifies a fixed vsync pulse of 8 lines to indicate RB v2 timings. Vertical back porch is fixed at 6 lines and vertical front porch is remainder of vertical blanking time. For RB v2, horizontal blanking is fixed at 80 pixels. Horizontal sync is fixed at 32. All horizontal timing counts (active pixels, front, back porches) can be specified upto a precision of 1. RB v2 allows for non standard aspect ratios. In RB v2 vsync does not indicate aspect ratio. In absence of aspect ratio v4l2_detect_cvt() cannot calculate image width from image height. Hence extending the v4l2_detect_cvt() to pass image width in case of RB v2. Signed-off-by: Prashant Laddha <prladdha@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-06[media] v4l2-dv-timings: use swap() in v4l2_calc_aspect_ratio()Fabian Frederick1-4/+1
Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-01Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-ledsLinus Torvalds4-12/+750
Pull LED subsystem updates from Bryan Wu: "In this cycle, we finished to merge patches for LED Flash class driver. Other than that we have some bug fixes and new drivers for LED controllers" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (33 commits) leds:lp55xx: fix firmware loading error leds: fix max77693-led build errors leds: fix aat1290 build errors leds: aat1290: pass flags parameter to devm_gpiod_get leds: ktd2692: pass flags parameter to devm_gpiod_get drivers/leds: don't use module_init in non-modular leds-cobalt-raq.c leds: aat1290: add support for V4L2 Flash sub-device DT: aat1290: Document handling external strobe sources leds: max77693: add support for V4L2 Flash sub-device media: Add registration helpers for V4L2 flash sub-devices v4l: async: Add a pointer to of_node to struct v4l2_subdev, match it Documentation: leds: Add description of v4l2-flash sub-device leds: add BCM6358 LED driver leds: add DT binding for BCM6358 LED controller leds: fix brightness changing when software blinking is active Documentation: leds-lp5523: describe master fader attributes leds: lp5523: add master_fader support leds: leds-gpio: Allow compile test if !GPIOLIB leds: leds-gpio: Add missing #include <linux/of.h> gpiolib: Add missing dummies for the unified device properties interface ...
2015-06-22media: Add registration helpers for V4L2 flash sub-devicesJacek Anaszewski3-0/+723
This patch adds helper functions for registering/unregistering LED Flash class devices as V4L2 sub-devices. The functions should be called from the LED subsystem device driver. In case the support for V4L2 Flash sub-devices is disabled in the kernel config the functions' empty versions will be used. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-06-22[media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffersLaurent Pinchart1-10/+23
Commit f61bf13b6a07 ("[media] vb2: add allow_zero_bytesused flag to the vb2_queue struct") added a WARN_ONCE to catch usage of a deprecated API using a zero value for v4l2_buffer.bytesused. However, the condition is checked incorrectly, as the v4L2_buffer bytesused field is supposed to be ignored for multiplanar buffers. This results in spurious warnings when using the multiplanar API. Fix it by checking v4l2_buffer.bytesused for uniplanar buffers and v4l2_plane.bytesused for multiplanar buffers. Fixes: f61bf13b6a07 ("[media] vb2: add allow_zero_bytesused flag to the vb2_queue struct") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: stable@vger.kernel.org # for v4.0 Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-18[media] Revert "[media] vb2: Push mmap_sem down to memops"Hans Verkuil4-18/+3
This reverts commit 48b25a3a713b90988b6882d318f7c0a6bed9aabc. That commit caused two regressions. The first is a BUG: Jun 14 18:42:15 test-media kernel: [ 115.972299] BUG: unable to handle kernel NULL pointer dereference at 0000000000000100 Jun 14 18:42:15 test-media kernel: [ 115.972307] IP: [<ffffffff810d5cd0>] __lock_acquire+0x2f0/0x2070 Jun 14 18:42:15 test-media kernel: [ 115.972316] PGD 0 Jun 14 18:42:15 test-media kernel: [ 115.972318] Oops: 0000 [#1] PREEMPT SMP Jun 14 18:42:15 test-media kernel: [ 115.972321] Modules linked in: vivid v4l2_dv_timings videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media vmw_balloon vmw_vmci acpi_cpufreq processor button Jun 14 18:42:15 test-media kernel: [ 115.972333] CPU: 0 PID: 1542 Comm: v4l2-ctl Not tainted 4.1.0-rc3-test-media #1190 Jun 14 18:42:15 test-media kernel: [ 115.972336] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014 Jun 14 18:42:15 test-media kernel: [ 115.972337] task: ffff880220ce4200 ti: ffff88021d16c000 task.ti: ffff88021d16c000 Jun 14 18:42:15 test-media kernel: [ 115.972339] RIP: 0010:[<ffffffff810d5cd0>] [<ffffffff810d5cd0>] __lock_acquire+0x2f0/0x2070 Jun 14 18:42:15 test-media kernel: [ 115.972342] RSP: 0018:ffff88021d16f9b8 EFLAGS: 00010002 Jun 14 18:42:15 test-media kernel: [ 115.972343] RAX: 0000000000000046 RBX: 0000000000000292 RCX: 0000000000000001 Jun 14 18:42:15 test-media kernel: [ 115.972345] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000100 Jun 14 18:42:15 test-media kernel: [ 115.972346] RBP: ffff88021d16fa88 R08: 0000000000000001 R09: 0000000000000000 Jun 14 18:42:15 test-media kernel: [ 115.972347] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001 Jun 14 18:42:15 test-media kernel: [ 115.972348] R13: ffff880220ce4200 R14: 0000000000000100 R15: 0000000000000000 Jun 14 18:42:15 test-media kernel: [ 115.972350] FS: 00007f2441e7f740(0000) GS:ffff880236e00000(0000) knlGS:0000000000000000 Jun 14 18:42:15 test-media kernel: [ 115.972351] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Jun 14 18:42:15 test-media kernel: [ 115.972353] CR2: 0000000000000100 CR3: 0000000001e0b000 CR4: 00000000001406f0 Jun 14 18:42:15 test-media kernel: [ 115.972424] Stack: Jun 14 18:42:15 test-media kernel: [ 115.972427] ffff88021d16fa98 ffffffff810d6543 0000000000000006 0000000000000246 Jun 14 18:42:15 test-media kernel: [ 115.972431] ffff88021d16fa08 ffffffff810d532d ffff880220ce4a78 ffff880200000000 Jun 14 18:42:15 test-media kernel: [ 115.972433] ffff880200000001 0000000000000000 0000000000000001 000000000093a4a0 Jun 14 18:42:15 test-media kernel: [ 115.972436] Call Trace: Jun 14 18:42:15 test-media kernel: [ 115.972440] [<ffffffff810d6543>] ? __lock_acquire+0xb63/0x2070 Jun 14 18:42:15 test-media kernel: [ 115.972443] [<ffffffff810d532d>] ? mark_held_locks+0x6d/0xa0 Jun 14 18:42:15 test-media kernel: [ 115.972445] [<ffffffff810d37a8>] ? __lock_is_held+0x58/0x80 Jun 14 18:42:15 test-media kernel: [ 115.972447] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0 Jun 14 18:42:15 test-media kernel: [ 115.972452] [<ffffffffa039f1f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc] Jun 14 18:42:15 test-media kernel: [ 115.972458] [<ffffffff819b1a92>] down_read+0x42/0x60 Jun 14 18:42:15 test-media kernel: [ 115.972460] [<ffffffffa039f1f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc] Jun 14 18:42:15 test-media kernel: [ 115.972463] [<ffffffff819af1b1>] ? mutex_lock_nested+0x2b1/0x560 Jun 14 18:42:15 test-media kernel: [ 115.972467] [<ffffffffa038fdc5>] ? vb2_queue_release+0x25/0x40 [videobuf2_core] Jun 14 18:42:15 test-media kernel: [ 115.972469] [<ffffffffa039f1f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc] Jun 14 18:42:15 test-media kernel: [ 115.972472] [<ffffffffa038b626>] __vb2_queue_free+0x146/0x5e0 [videobuf2_core] Jun 14 18:42:15 test-media kernel: [ 115.972475] [<ffffffffa038fdd3>] vb2_queue_release+0x33/0x40 [videobuf2_core] Jun 14 18:42:15 test-media kernel: [ 115.972478] [<ffffffffa038fe75>] _vb2_fop_release+0x95/0xb0 [videobuf2_core] Jun 14 18:42:15 test-media kernel: [ 115.972481] [<ffffffffa038feb9>] vb2_fop_release+0x29/0x50 [videobuf2_core] Jun 14 18:42:15 test-media kernel: [ 115.972485] [<ffffffffa03ad372>] vivid_fop_release+0x92/0x230 [vivid] Jun 14 18:42:15 test-media kernel: [ 115.972491] [<ffffffffa0358460>] v4l2_release+0x30/0x80 [videodev] Jun 14 18:42:15 test-media kernel: [ 115.972496] [<ffffffff811a51d5>] __fput+0xe5/0x200 Jun 14 18:42:15 test-media kernel: [ 115.972498] [<ffffffff811a5339>] ____fput+0x9/0x10 Jun 14 18:42:15 test-media kernel: [ 115.972501] [<ffffffff810a9fa4>] task_work_run+0xc4/0xf0 Jun 14 18:42:15 test-media kernel: [ 115.972504] [<ffffffff8108c670>] do_exit+0x3a0/0xaf0 Jun 14 18:42:15 test-media kernel: [ 115.972507] [<ffffffff819b3a9b>] ? _raw_spin_unlock_irq+0x2b/0x60 Jun 14 18:42:15 test-media kernel: [ 115.972509] [<ffffffff8108e0ff>] do_group_exit+0x4f/0xe0 Jun 14 18:42:15 test-media kernel: [ 115.972511] [<ffffffff8109a170>] get_signal+0x200/0x8c0 Jun 14 18:42:15 test-media kernel: [ 115.972514] [<ffffffff819b14b5>] ? __mutex_unlock_slowpath+0xf5/0x240 Jun 14 18:42:15 test-media kernel: [ 115.972518] [<ffffffff81002593>] do_signal+0x23/0x820 Jun 14 18:42:15 test-media kernel: [ 115.972521] [<ffffffff819b1609>] ? mutex_unlock+0x9/0x10 Jun 14 18:42:15 test-media kernel: [ 115.972524] [<ffffffffa0358648>] ? v4l2_ioctl+0x78/0xf0 [videodev] Jun 14 18:42:15 test-media kernel: [ 115.972526] [<ffffffff819b4653>] ? int_very_careful+0x5/0x46 Jun 14 18:42:15 test-media kernel: [ 115.972529] [<ffffffff810d54bd>] ? trace_hardirqs_on_caller+0x15d/0x200 Jun 14 18:42:15 test-media kernel: [ 115.972531] [<ffffffff81002de0>] do_notify_resume+0x50/0x60 Jun 14 18:42:15 test-media kernel: [ 115.972533] [<ffffffff819b46a6>] int_signal+0x12/0x17 Jun 14 18:42:15 test-media kernel: [ 115.972534] Code: ca 81 31 c0 e8 7a e2 8c 00 e8 aa 1d 8d 00 0f 1f 44 00 00 31 db 48 81 c4 a8 00 00 00 89 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 90 <49> 81 3e 40 4e 02 82 b8 00 00 00 00 44 0f 44 e0 41 83 ff 01 0f Jun 14 18:42:15 test-media kernel: [ 115.972567] RIP [<ffffffff810d5cd0>] __lock_acquire+0x2f0/0x2070 Jun 14 18:42:15 test-media kernel: [ 115.972569] RSP <ffff88021d16f9b8> Jun 14 18:42:15 test-media kernel: [ 115.972570] CR2: 0000000000000100 Jun 14 18:42:15 test-media kernel: [ 115.972573] ---[ end trace 25595c2b8560cb57 ]--- Jun 14 18:42:15 test-media kernel: [ 115.972575] Fixing recursive fault but reboot is needed! This can be reproduced by loading the vivid driver and running: v4l2-ctl --stream-user and pressing Ctrl-C. You may have to try a few times, but in my experience this BUG is triggered quite quickly. The second is a possible deadlock: Jun 14 18:44:07 test-media kernel: [ 49.376650] ====================================================== Jun 14 18:44:07 test-media kernel: [ 49.376651] [ INFO: possible circular locking dependency detected ] Jun 14 18:44:07 test-media kernel: [ 49.376653] 4.1.0-rc3-test-media #1190 Not tainted Jun 14 18:44:07 test-media kernel: [ 49.376654] ------------------------------------------------------- Jun 14 18:44:07 test-media kernel: [ 49.376655] v4l2-compliance/1468 is trying to acquire lock: Jun 14 18:44:07 test-media kernel: [ 49.376657] (&mm->mmap_sem){++++++}, at: [<ffffffffa03a81f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc] Jun 14 18:44:07 test-media kernel: [ 49.376665] Jun 14 18:44:07 test-media kernel: [ 49.376665] but task is already holding lock: Jun 14 18:44:07 test-media kernel: [ 49.376666] (&q->mmap_lock){+.+...}, at: [<ffffffffa0398dc5>] vb2_queue_release+0x25/0x40 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376670] Jun 14 18:44:07 test-media kernel: [ 49.376670] which lock already depends on the new lock. Jun 14 18:44:07 test-media kernel: [ 49.376670] Jun 14 18:44:07 test-media kernel: [ 49.376671] Jun 14 18:44:07 test-media kernel: [ 49.376671] the existing dependency chain (in reverse order) is: Jun 14 18:44:07 test-media kernel: [ 49.376672] Jun 14 18:44:07 test-media kernel: [ 49.376672] -> #1 (&q->mmap_lock){+.+...}: Jun 14 18:44:07 test-media kernel: [ 49.376675] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0 Jun 14 18:44:07 test-media kernel: [ 49.376682] [<ffffffff819aef5e>] mutex_lock_nested+0x5e/0x560 Jun 14 18:44:07 test-media kernel: [ 49.376689] [<ffffffffa03934a2>] vb2_mmap+0x232/0x350 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376691] [<ffffffffa0395a60>] vb2_fop_mmap+0x20/0x30 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376694] [<ffffffffa0361102>] v4l2_mmap+0x52/0x90 [videodev] Jun 14 18:44:07 test-media kernel: [ 49.376698] [<ffffffff81177e33>] mmap_region+0x3b3/0x5e0 Jun 14 18:44:07 test-media kernel: [ 49.376701] [<ffffffff81178377>] do_mmap_pgoff+0x317/0x400 Jun 14 18:44:07 test-media kernel: [ 49.376703] [<ffffffff81165320>] vm_mmap_pgoff+0x90/0xc0 Jun 14 18:44:07 test-media kernel: [ 49.376708] [<ffffffff81176867>] SyS_mmap_pgoff+0x1d7/0x280 Jun 14 18:44:07 test-media kernel: [ 49.376709] [<ffffffff81007f8d>] SyS_mmap+0x1d/0x20 Jun 14 18:44:07 test-media kernel: [ 49.376714] [<ffffffff819b44ae>] system_call_fastpath+0x12/0x76 Jun 14 18:44:07 test-media kernel: [ 49.376716] Jun 14 18:44:07 test-media kernel: [ 49.376716] -> #0 (&mm->mmap_sem){++++++}: Jun 14 18:44:07 test-media kernel: [ 49.376718] [<ffffffff810d79b3>] __lock_acquire+0x1fd3/0x2070 Jun 14 18:44:07 test-media kernel: [ 49.376720] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0 Jun 14 18:44:07 test-media kernel: [ 49.376721] [<ffffffff819b1a92>] down_read+0x42/0x60 Jun 14 18:44:07 test-media kernel: [ 49.376723] [<ffffffffa03a81f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc] Jun 14 18:44:07 test-media kernel: [ 49.376725] [<ffffffffa0394626>] __vb2_queue_free+0x146/0x5e0 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376727] [<ffffffffa0398dd3>] vb2_queue_release+0x33/0x40 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376729] [<ffffffffa0398e75>] _vb2_fop_release+0x95/0xb0 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376731] [<ffffffffa0398eb9>] vb2_fop_release+0x29/0x50 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376733] [<ffffffffa03b6372>] vivid_fop_release+0x92/0x230 [vivid] Jun 14 18:44:07 test-media kernel: [ 49.376737] [<ffffffffa0361460>] v4l2_release+0x30/0x80 [videodev] Jun 14 18:44:07 test-media kernel: [ 49.376739] [<ffffffff811a51d5>] __fput+0xe5/0x200 Jun 14 18:44:07 test-media kernel: [ 49.376744] [<ffffffff811a5339>] ____fput+0x9/0x10 Jun 14 18:44:07 test-media kernel: [ 49.376746] [<ffffffff810a9fa4>] task_work_run+0xc4/0xf0 Jun 14 18:44:07 test-media kernel: [ 49.376749] [<ffffffff81002dd1>] do_notify_resume+0x41/0x60 Jun 14 18:44:07 test-media kernel: [ 49.376752] [<ffffffff819b46a6>] int_signal+0x12/0x17 Jun 14 18:44:07 test-media kernel: [ 49.376754] Jun 14 18:44:07 test-media kernel: [ 49.376754] other info that might help us debug this: Jun 14 18:44:07 test-media kernel: [ 49.376754] Jun 14 18:44:07 test-media kernel: [ 49.376755] Possible unsafe locking scenario: Jun 14 18:44:07 test-media kernel: [ 49.376755] Jun 14 18:44:07 test-media kernel: [ 49.376756] CPU0 CPU1 Jun 14 18:44:07 test-media kernel: [ 49.376757] ---- ---- Jun 14 18:44:07 test-media kernel: [ 49.376758] lock(&q->mmap_lock); Jun 14 18:44:07 test-media kernel: [ 49.376759] lock(&mm->mmap_sem); Jun 14 18:44:07 test-media kernel: [ 49.376760] lock(&q->mmap_lock); Jun 14 18:44:07 test-media kernel: [ 49.376761] lock(&mm->mmap_sem); Jun 14 18:44:07 test-media kernel: [ 49.376763] Jun 14 18:44:07 test-media kernel: [ 49.376763] *** DEADLOCK *** Jun 14 18:44:07 test-media kernel: [ 49.376763] Jun 14 18:44:07 test-media kernel: [ 49.376764] 2 locks held by v4l2-compliance/1468: Jun 14 18:44:07 test-media kernel: [ 49.376765] #0: (&dev->mutex#3){+.+.+.}, at: [<ffffffffa0398e0a>] _vb2_fop_release+0x2a/0xb0 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376770] #1: (&q->mmap_lock){+.+...}, at: [<ffffffffa0398dc5>] vb2_queue_release+0x25/0x40 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376773] Jun 14 18:44:07 test-media kernel: [ 49.376773] stack backtrace: Jun 14 18:44:07 test-media kernel: [ 49.376776] CPU: 2 PID: 1468 Comm: v4l2-compliance Not tainted 4.1.0-rc3-test-media #1190 Jun 14 18:44:07 test-media kernel: [ 49.376777] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014 Jun 14 18:44:07 test-media kernel: [ 49.376779] ffffffff8279e0b0 ffff88021d6f7ba8 ffffffff819a7aac 0000000000000011 Jun 14 18:44:07 test-media kernel: [ 49.376781] ffffffff8279e0b0 ffff88021d6f7bf8 ffffffff819a3964 ffff88021d6f7bd8 Jun 14 18:44:07 test-media kernel: [ 49.376783] ffff8800ac8aa100 0000000000000002 ffff8800ac8aa9a0 0000000000000002 Jun 14 18:44:07 test-media kernel: [ 49.376785] Call Trace: Jun 14 18:44:07 test-media kernel: [ 49.376788] [<ffffffff819a7aac>] dump_stack+0x4f/0x7b Jun 14 18:44:07 test-media kernel: [ 49.376792] [<ffffffff819a3964>] print_circular_bug+0x20f/0x251 Jun 14 18:44:07 test-media kernel: [ 49.376793] [<ffffffff810d79b3>] __lock_acquire+0x1fd3/0x2070 Jun 14 18:44:07 test-media kernel: [ 49.376795] [<ffffffff810d6543>] ? __lock_acquire+0xb63/0x2070 Jun 14 18:44:07 test-media kernel: [ 49.376797] [<ffffffff810d37a8>] ? __lock_is_held+0x58/0x80 Jun 14 18:44:07 test-media kernel: [ 49.376798] [<ffffffff810d852c>] lock_acquire+0x6c/0xa0 Jun 14 18:44:07 test-media kernel: [ 49.376800] [<ffffffffa03a81f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc] Jun 14 18:44:07 test-media kernel: [ 49.376802] [<ffffffff819b1a92>] down_read+0x42/0x60 Jun 14 18:44:07 test-media kernel: [ 49.376803] [<ffffffffa03a81f6>] ? vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc] Jun 14 18:44:07 test-media kernel: [ 49.376805] [<ffffffff819af1b1>] ? mutex_lock_nested+0x2b1/0x560 Jun 14 18:44:07 test-media kernel: [ 49.376807] [<ffffffffa0398dc5>] ? vb2_queue_release+0x25/0x40 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376808] [<ffffffffa03a81f6>] vb2_vmalloc_put_userptr+0x36/0x110 [videobuf2_vmalloc] Jun 14 18:44:07 test-media kernel: [ 49.376810] [<ffffffffa0398e0a>] ? _vb2_fop_release+0x2a/0xb0 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376812] [<ffffffffa0394626>] __vb2_queue_free+0x146/0x5e0 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376814] [<ffffffffa0398dd3>] vb2_queue_release+0x33/0x40 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376816] [<ffffffffa0398e75>] _vb2_fop_release+0x95/0xb0 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376818] [<ffffffffa0398eb9>] vb2_fop_release+0x29/0x50 [videobuf2_core] Jun 14 18:44:07 test-media kernel: [ 49.376820] [<ffffffffa03b6372>] vivid_fop_release+0x92/0x230 [vivid] Jun 14 18:44:07 test-media kernel: [ 49.376822] [<ffffffffa0361460>] v4l2_release+0x30/0x80 [videodev] Jun 14 18:44:07 test-media kernel: [ 49.376824] [<ffffffff811a51d5>] __fput+0xe5/0x200 Jun 14 18:44:07 test-media kernel: [ 49.376825] [<ffffffff819b4653>] ? int_very_careful+0x5/0x46 Jun 14 18:44:07 test-media kernel: [ 49.376827] [<ffffffff811a5339>] ____fput+0x9/0x10 Jun 14 18:44:07 test-media kernel: [ 49.376828] [<ffffffff810a9fa4>] task_work_run+0xc4/0xf0 Jun 14 18:44:07 test-media kernel: [ 49.376830] [<ffffffff81002dd1>] do_notify_resume+0x41/0x60 Jun 14 18:44:07 test-media kernel: [ 49.376832] [<ffffffff819b46a6>] int_signal+0x12/0x17 This can be triggered by loading the vivid module with the module option 'no_error_inj=1' and running 'v4l2-compliance -s5'. Again, it may take a few attempts to trigger this but for me it happens quite quickly. Without this patch I cannot reproduce these two issues. So reverting is the best solution for now. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-15v4l: async: Add a pointer to of_node to struct v4l2_subdev, match itSakari Ailus1-12/+27
V4L2 async sub-devices are currently matched (OF case) based on the struct device_node pointer in struct device. LED devices may have more than one LED, and in that case the OF node to match is not directly the device's node, but a LED's node. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-06-09[media] v4l2-dv-timings: add interlace support in detect cvt/gtfPrashant Laddha1-6/+47
Extend detect_cvt/gtf API to indicate the format type (interlaced or progressive). In case of interlaced, the vertical front and back porch and vsync values for both (odd,even) fields are considered to derive image height. Populated vsync, vertical front, back porch values in bt timing structure for even and odd fields and updated the flags appropriately. Also modified the functions calling the detect_cvt/gtf(). As of now these functions are calling detect_cvt/gtf() with interlaced flag set to false. Cc: Martin Bugge <marbugge@cisco.com> Cc: Mats Randgaard <matrandg@cisco.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Prashant Laddha <prladdha@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09[media] v4l2-dv-timings: support interlaced in v4l2_print_dv_timingsHans Verkuil1-0/+7
The v4l2_print_dv_timings() didn't log the interlaced format correctly. The timings for the bottom field weren't logged and the fields per second value was half of what it should have been. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09[media] v4l2-dv-timing: avoid rounding twice in gtf hblank calcPrashant Laddha1-4/+6
Currently, in gtf hblank calculations, the rounding is used twice, one at intermediate division and one at final state where hblank is rounded to nearest multiple of twice cell granularity. This error got introduced in 'commit d7ed5a3ddaec ("[media] v4l2-dv-timings: fix rounding in hblank and hsync calculation"), where it missed combining the rounding step. Correcting the same in this patch. Signed-off-by: Prashant Laddha <prladdha@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09[media] v4l2-mem2mem: add support for prepare_bufHans Verkuil1-0/+28
This was never added for some reason, so add it now. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-06[media] v4l2-ioctl: log buffer type 0 correctlyHans Verkuil1-0/+1
If userspace passed the invalid buffer type 0 to the kernel, then the kernel log would show 'type=(null)' since there was no string defined for type 0. Fix this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-06[media] v4l2-ioctl: clear the reserved field of v4l2_create_buffersHans Verkuil1-0/+2
This field was never cleared by the kernel making future extensions hard to implement. Clear it now. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-06[media] v4l: of: Correct pclk-sample for BT656 busNikhil Devshatwar1-4/+4
Current v4l2_of_parse_parallel_bus function attempts to parse the DT properties for the parallel bus as well as BT656 bus. If the pclk-sample property is defined for the BT656 bus, it is still marked as a parallel bus. Fix this by parsing the pclk after the bus_type is selected. Only when hsync or vsync properties are specified, the bus_type should be set to V4L2_MBUS_PARALLEL. Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05[media] videodev2.h: add support for transfer functionsHans Verkuil1-4/+5
In the past the transfer function was implied by the colorspace. However, it is an independent entity in its own right. Add support for explicitly choosing the transfer function. This change will allow us to represent linear RGB (as is used by openGL), and it will make it easier to work with decoded video material since most codecs store the transfer function as a separate property as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30[media] v4l2: correct two SDR format namesAntti Palosaari1-2/+2
U8 and U16LE format human readable names were translated with string containing emulated word. These strings were taken from msi2500 driver, where those formats were emulated (after module parameter is set). But on API correct names should be used, without any special case notes. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30[media] media/v4l2-core: Add support for V4L2_PIX_FMT_Y16_BERicardo Ribalda1-1/+2
16 bit greyscale format, structured in Big Endian. Such a format can be converted into a PMN image just by adding a header. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30[media] media/videobuf2-dma-vmalloc: Save output from dma_map_sgRicardo Ribalda1-3/+3
dma_map_sg returns the number of areas mapped by the hardware, which could be different than the areas given as an input. The output must be saved to nent. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30[media] media/videobuf2-dma-contig: Save output from dma_map_sgRicardo Ribalda1-3/+3
dma_map_sg returns the number of areas mapped by the hardware, which could be different than the areas given as an input. The output must be saved to nent. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30[media] media/videobuf2-dma-sg: Fix handling of sg_table structureRicardo Ribalda1-9/+13
When sg_alloc_table_from_pages() does not fail it returns a sg_table structure with nents and nents_orig initialized to the same value. dma_map_sg returns the number of areas mapped by the hardware, which could be different than the areas given as an input. The output must be saved to nent. The output of dma_map, should be used to transverse the scatter list. dma_unmap_sg needs the value passed to dma_map_sg (nents_orig). sg_free_tables uses also orig_nent. This patch fix the file to follow this paradigm. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-20[media] vb2: allow requeuing buffers while streamingHans Verkuil1-3/+8
vb2_buffer_done() already allows STATE_QUEUED, but currently only when not streaming. It is useful to allow it while streaming as well, as this makes it possible for drivers to requeue buffers while waiting for a stable video signal. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] v4l2-dv-timings: fix overflow in gtf timings calculationPrashant Laddha1-10/+18
The intermediate calculation in the expression for hblank can exceed 32 bit signed range. This overflow can lead to negative values for hblank. Typecasting intermediate variable to higher precision. Cc: Martin Bugge <marbugge@cisco.com> Signed-off-by: Prashant Laddha <prladdha@cisco.com> [hans.verkuil@cisco.com: made the denominator u32, since that's what div_u64 expects] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12[media] videobuf2: return -EPIPE from DQBUF after the last bufferPhilipp Zabel2-2/+27
If the last buffer was dequeued from a capture queue, let poll return immediately and let DQBUF return -EPIPE to signal there will no more buffers to dequeue until STREAMOFF. The driver signals the last buffer by setting the V4L2_BUF_FLAG_LAST. To reenable dequeuing on the capture queue, the driver must explicitly call vb2_clear_last_buffer_queued. The last buffer queued flag is cleared automatically during STREAMOFF. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01[media] vb2: Push mmap_sem down to memopsJan Kara4-3/+18
Currently vb2 core acquires mmap_sem just around call to __qbuf_userptr(). However since commit f035eb4e976ef5 (videobuf2: fix lockdep warning) it isn't necessary to acquire it so early as we no longer have to drop queue mutex before acquiring mmap_sem. So push acquisition of mmap_sem down into .get_userptr and .put_userptr memops so that the semaphore is acquired for a shorter time and it is clearer what it is needed for. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01[media] v4l2-dv-timings: replace hsync magic number with a macroPrashant Laddha1-1/+2
This change will not change timing calculation. In CVT generator spreadsheet the nominal value of hsync (as a percentage of line) is 8 percent. Cc: Martin Bugge <marbugge@cisco.com> Signed-off-by: Prashant Laddha <prladdha@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01[media] v4l2-dv-timings: add sanity checks in cvt,gtf calculationsPrashant Laddha1-0/+12
Wrong values of hfreq and image height can lead to strange timings. Avoid timing calculations for such values. Suggested By: Martin Bugge <marbugge@cisco.com> Cc: Martin Bugge <marbugge@cisco.com> Signed-off-by: Prashant Laddha <prladdha@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.