| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull media documentation updates from Mauro Carvalho Chehab:
"This patch series does the conversion of all media documentation stuff
to Restrutured Text markup format and add them to the
Documentation/index.rst file.
The media documentation was grouped into 4 books:
- media uAPI
- media kAPI
- V4L driver-specific documentation
- DVB driver-specific documentation
It also contains several documentation improvements and one fixup
patch for a core issue with cropcap.
PS. After this patch series, the media DocBook is deprecated and
should be removed. I'll add such patch on a future pull request"
* tag 'media/v4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (322 commits)
[media] cx23885-cardlist.rst: add a new card
[media] doc-rst: add some needed escape codes
[media] doc-rst: kapi: use :c:func: instead of :cpp:func
doc-rst: kernel-doc: fix a change introduced by mistake
[media] v4l2-ioctl.h add debug info for struct v4l2_ioctl_ops
[media] dvb_ringbuffer.h: some documentation improvements
[media] v4l2-ctrls.h: fully document the header file
[media] doc-rst: Fix some typedef ugly warnings
[media] doc-rst: reorganize the kAPI v4l2 chapters
[media] rename v4l2-framework.rst to v4l2-intro.rst
[media] move V4L2 clocks to a separate .rst file
[media] v4l2-fh.rst: add cross references and markups
[media] v4l2-fh.rst: add fh contents from v4l2-framework.rst
[media] v4l2-fh.h: add documentation for it
[media] v4l2-event.rst: add cross-references and markups
[media] v4l2-event.h: document all functions
[media] v4l2-event.rst: add text from v4l2-framework.rst
[media] v4l2-framework.rst: remove videobuf quick chapter
[media] v4l2-dev: add cross-references and improve markup
[media] doc-rst: move v4l2-dev doc to a separate file
...
|
|
Pull networking updates from David Miller:
1) Unified UDP encapsulation offload methods for drivers, from
Alexander Duyck.
2) Make DSA binding more sane, from Andrew Lunn.
3) Support QCA9888 chips in ath10k, from Anilkumar Kolli.
4) Several workqueue usage cleanups, from Bhaktipriya Shridhar.
5) Add XDP (eXpress Data Path), essentially running BPF programs on RX
packets as soon as the device sees them, with the option to mirror
the packet on TX via the same interface. From Brenden Blanco and
others.
6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet.
7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli.
8) Simplify netlink conntrack entry layout, from Florian Westphal.
9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido
Schimmel, Yotam Gigi, and Jiri Pirko.
10) Add SKB array infrastructure and convert tun and macvtap over to it.
From Michael S Tsirkin and Jason Wang.
11) Support qdisc packet injection in pktgen, from John Fastabend.
12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy.
13) Add NV congestion control support to TCP, from Lawrence Brakmo.
14) Add GSO support to SCTP, from Marcelo Ricardo Leitner.
15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni.
16) Support MPLS over IPV4, from Simon Horman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
xgene: Fix build warning with ACPI disabled.
be2net: perform temperature query in adapter regardless of its interface state
l2tp: Correctly return -EBADF from pppol2tp_getname.
net/mlx5_core/health: Remove deprecated create_singlethread_workqueue
net: ipmr/ip6mr: update lastuse on entry change
macsec: ensure rx_sa is set when validation is disabled
tipc: dump monitor attributes
tipc: add a function to get the bearer name
tipc: get monitor threshold for the cluster
tipc: make cluster size threshold for monitoring configurable
tipc: introduce constants for tipc address validation
net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update()
MAINTAINERS: xgene: Add driver and documentation path
Documentation: dtb: xgene: Add MDIO node
dtb: xgene: Add MDIO node
drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset
drivers: net: xgene: Use exported functions
drivers: net: xgene: Enable MDIO driver
drivers: net: xgene: Add backward compatibility
drivers: net: phy: xgene: Add MDIO driver
...
|
|
* topic/docs-next: (322 commits)
[media] cx23885-cardlist.rst: add a new card
[media] doc-rst: add some needed escape codes
[media] doc-rst: kapi: use :c:func: instead of :cpp:func
doc-rst: kernel-doc: fix a change introduced by mistake
[media] v4l2-ioctl.h add debug info for struct v4l2_ioctl_ops
[media] dvb_ringbuffer.h: some documentation improvements
[media] v4l2-ctrls.h: fully document the header file
[media] doc-rst: Fix some typedef ugly warnings
[media] doc-rst: reorganize the kAPI v4l2 chapters
[media] rename v4l2-framework.rst to v4l2-intro.rst
[media] move V4L2 clocks to a separate .rst file
[media] v4l2-fh.rst: add cross references and markups
[media] v4l2-fh.rst: add fh contents from v4l2-framework.rst
[media] v4l2-fh.h: add documentation for it
[media] v4l2-event.rst: add cross-references and markups
[media] v4l2-event.h: document all functions
[media] v4l2-event.rst: add text from v4l2-framework.rst
[media] v4l2-framework.rst: remove videobuf quick chapter
[media] v4l2-dev: add cross-references and improve markup
[media] doc-rst: move v4l2-dev doc to a separate file
...
|
|
Pull media updates from Mauro Carvalho Chehab:
- new framework support for HDMI CEC and remote control support
- new encoding codec driver for Mediatek SoC
- new frontend driver: helene tuner
- added support for NetUp almost universal devices, with supports
DVB-C/S/S2/T/T2 and ISDB-T
- the mn88472 frontend driver got promoted from staging
- a new driver for RCar video input
- some soc_camera legacy drivers got removed: timb, omap1, mx2, mx3
- lots of driver cleanups, improvements and fixups
* tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
[media] cec: always check all_device_types and features
[media] cec: poll should check if there is room in the tx queue
[media] vivid: support monitor all mode
[media] cec: fix test for unconfigured adapter in main message loop
[media] cec: limit the size of the transmit queue
[media] cec: zero unused msg part after msg->len
[media] cec: don't set fh to NULL in CEC_TRANSMIT
[media] cec: clear all status fields before transmit and always fill in sequence
[media] cec: CEC_RECEIVE overwrote the timeout field
[media] cxd2841er: Reading SNR for DVB-C added
[media] cxd2841er: Reading BER and UCB for DVB-C added
[media] cxd2841er: fix switch-case for DVB-C
[media] cxd2841er: fix signal strength scale for ISDB-T
[media] cxd2841er: adjust the dB scale for DVB-C
[media] cxd2841er: provide signal strength for DVB-C
[media] cxd2841er: fix BER report via DVBv5 stats API
[media] mb86a20s: apply mask to val after checking for read failure
[media] airspy: fix error logic during device register
[media] s5p-cec/TODO: add TODO item
[media] cec/TODO: drop comment about sphinx documentation
...
|
|
Just several instances of overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some extra escape codes are needed to avoid Sphinx to not
identify the tags.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Better document a note on this header.
While here, better format dvb_ringbuffer_pkt_read_user()
to adjust it to CodingStyle.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Add documentation for v4l2-dev.h, and put it at v4l2-framework.rst,
where struct video_device is currently documented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This header were poorly documented, and weren't using the
kernel-doc format. Document everything but the macros using
the right format.
While here, also fix the other comments to match the
Linux CodingStyle.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Fix all remaining media warnings with ReST that are fixable
without changing at the Sphinx code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
* patchwork: (1492 commits)
[media] cec: always check all_device_types and features
[media] cec: poll should check if there is room in the tx queue
[media] vivid: support monitor all mode
[media] cec: fix test for unconfigured adapter in main message loop
[media] cec: limit the size of the transmit queue
[media] cec: zero unused msg part after msg->len
[media] cec: don't set fh to NULL in CEC_TRANSMIT
[media] cec: clear all status fields before transmit and always fill in sequence
[media] cec: CEC_RECEIVE overwrote the timeout field
[media] cxd2841er: Reading SNR for DVB-C added
[media] cxd2841er: Reading BER and UCB for DVB-C added
[media] cxd2841er: fix switch-case for DVB-C
[media] cxd2841er: fix signal strength scale for ISDB-T
[media] cxd2841er: adjust the dB scale for DVB-C
[media] cxd2841er: provide signal strength for DVB-C
[media] cxd2841er: fix BER report via DVBv5 stats API
[media] mb86a20s: apply mask to val after checking for read failure
[media] airspy: fix error logic during device register
[media] s5p-cec/TODO: add TODO item
[media] cec/TODO: drop comment about sphinx documentation
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Just pass the transmitted CEC message to all CEC adapters.
This implements the Monitor All mode for vivid.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
On mips and parisc:
drivers/bluetooth/btwilink.c: In function 'ti_st_open':
drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow]
hst->reg_status = -EINPROGRESS;
drivers/nfc/nfcwilink.c: In function 'nfcwilink_open':
drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow]
drv->st_register_cb_status = -EINPROGRESS;
There are actually two issues:
1. Whether "char" is signed or unsigned depends on the architecture.
As the completion callback data is used to pass a (negative) error
code, it should always be signed.
2. EINPROGRESS is 150 on mips, 245 on parisc.
Hence -EINPROGRESS doesn't fit in a signed 8-bit number.
Change the callback status from "char" to "int" to fix these.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The conversion from DocBook required some fixes:
- Now, the C files with the exported symbols also need to be
added. So, all headers need to be included twice: one to
get the structs/enums/.. and another one for the functions;
- Notes should use the ReST tag, as kernel-doc doesn't
recognizes it anymore;
- Identation needs to be fixed, as ReST uses it to identify
when a format "tag" ends.
- Fix the cross-references at the media controller description.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Move the contents of the media section at
DocBooks/DocBook/device-drivers.tmpl to a new ReST book.
For now, the contents is kept as-is. Next patches will fix
the warnings and add cross-references that were removed due to
the conversion.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Now driver returns correct values for DVB-C:
SNR (in dB)
[mchehab@s-opensource.com: fix a new function to be static]
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
now driver returns correct values for DVB-C:
BER (post_bit_count and post_bit_error values)
UCB (count of uncorrected errors)
also, some code cleanup was done - checkpatch.pl now is happy
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
DVB-C should use cxd2841er_read_agc_gain_c() to get the gain. The same
function is used for all DVB-C annex delivery systems.
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The scale for ISDB-T was wrong too: it was inverted, and
on a relative scale.
Use a linear interpolation to make it look better.
The formula was empirically determined, using 3 frequencies
(175 MHz, 410 MHz and 800 MHz), measuring from -50dBm to
-12dBm in steps of 0.5dB.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Instead of using a relative frequency range, calibrate it to
show the results in dB. The callibration was done getting
samples with a signal generated from -50dBm to -12dBm,
incremented in steps of 0.5 dB, using 3 frequencies:
175 MHz, 410 MHz and 800 MHz. The modulated signal was
using QAM64, and it was used a linear interpolation of all
the results.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Currently, there's no stats for DVB-C. Let's at least return
signal strength. The scale is different than on DVB-T, so let's
use a relative scale, for now.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
What userspace expects is to receive both bit_error and bit_count
counters. So, instead of doing the division at the Kernel,
return the counters for userspace to handle it the way it
wants.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Fix a memory leak on probe error of the airspy usb device driver.
The problem is triggered when more than 64 usb devices register with
v4l2 of type VFL_TYPE_SDR or VFL_TYPE_SUBDEV.
The memory leak is caused by the probe function of the airspy driver
mishandeling errors and not freeing the corresponding control structures
when an error occours registering the device to v4l2 core.
A badusb device can emulate 64 of these devices, and then through
continual emulated connect/disconnect of the 65th device, cause the
kernel to run out of RAM and crash the kernel, thus causing a local DOS
vulnerability.
Fixes CVE-2016-5400
Signed-off-by: James Patrick-Evans <james@jmp-e.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Appling the mask 0x0f to the immediate return of the call to
mb86a20s_readreg will always result in a positive value, meaning that the
check of ret < 0 will never work. Instead, check for a -ve return value
first, and then mask val with 0x0f.
Kudos to Mauro Carvalho Chehab for spotting the mistake in my original fix.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This patch addresses CVE-2016-5400, a local DOS vulnerability caused by
a memory leak in the airspy usb device driver.
The vulnerability is triggered when more than 64 usb devices register
with v4l2 of type VFL_TYPE_SDR or VFL_TYPE_SUBDEV.A badusb device can
emulate 64 of these devices then through continual emulated
connect/disconnect of the 65th device, cause the kernel to run out of
RAM and crash the kernel.
The vulnerability exists in kernel versions from 3.17 to current 4.7.
The memory leak is caused by the probe function of the airspy driver
mishandeling errors and not freeing the corresponding control structures
when an error occours registering the device to v4l2 core.
Signed-off-by: James Patrick-Evans <james@jmp-e.com>
Cc: stable@vger.kernel.org # Up to Kernel 3.17
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Fix typo in vivid that caused all HDMI outputs to have the same
physical address.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
When calculate OUTPUT buffer size in vidioc_try_fmt, it will
add more size hw need in each plane.
But in mtk_vcodec_enc_set_default_params, it do not add
same size in each plane.
This makes v4l2-compliance test fail.
This patch fix the issue.
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The newly added mtk-vcodec driver produces a number of warnings in an
ARM allmodconfig build, mainly since it assumes that dma_addr_t is
32-bit wide:
mtk-vcodec/venc/venc_vp8_if.c: In function 'vp8_enc_alloc_work_buf':
mtk-vcodec/venc/venc_vp8_if.c:212:191: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
mtk-vcodec/venc/venc_h264_if.c: In function 'h264_enc_alloc_work_buf':
mtk-vcodec/venc/venc_h264_if.c:297:190: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
This rearranges the format strings and type casts to what they should
have been in order to avoid the warnings. e0f80d8d62f5 ("[media]
mtk-vcodec: fix two compiler warnings") fixed some of the problems that
were introduced at the same time, but missed two others.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Instead of hardcoding a timeout, let userspace change it dynamically
by adding a s_timeout ops.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The redrat3 sends an usb packet to the host either when the minimum pause
or the timeout occurs, so we can always add a trailing space in our
processing.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
LIRC_SET_SEND_CARRIER should return 0 on success or -errno.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
When s_tx_mask is given an invalid bitmask, the number of transmitters
should be returned. See the LIRC_SET_TRANSMITTER_MASK lirc ioctl
documentation.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The value 5 of the EEPROM_TS_MODE register (meaning dual tuner presence) is
only valid for AF9035 devices. For IT9135 devices it is invalid and led to a
false positive dual tuner mode detection with PCTV 79e.
Therefore on non-AF9035 devices and with value 5 the driver now defaults to
single tuner mode and outputs a regarding info message to log.
This fixes Bugzilla bug #118561.
Reported-by: Marc Duponcheel <marc@offline.be>
Signed-off-by: Stefan Pöschel <basic.master@gmx.de>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
If a system configures the Nuvoton chip to use the alternative
EFM IO address (CR_EFIR2) then after probing the primary EFM IO
address (CR_EFIR) this region is not released.
If a driver for another function of the Nuvoton Super I/O
chip uses the same probing mechanism then it will hang if
loaded after the nuvoton-cir driver.
This was reported for the nct6775 hwmon driver.
Fix this by properly releasing the region after probing CR_EFIR.
This regression was introduced with kernel 4.6 so cc it to stable.
Reported-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Antti Seppälä <a.seppala@gmail.com>
Cc: <stable@vger.kernel.org> # 4.6.x-
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Don't free the object until the file handle has been closed. Fixes
use-after-free bug which occurs when I disconnect my DVB-S received
while VDR is running.
This is a crash dump of such a use-after-free:
general protection fault: 0000 [#1] SMP
CPU: 0 PID: 2541 Comm: CI adapter on d Not tainted 4.7.0-rc1-hosting+ #49
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff880027d7ce00 ti: ffff88003d8f8000 task.ti: ffff88003d8f8000
RIP: 0010:[<ffffffff812f3d1f>] [<ffffffff812f3d1f>] dvb_ca_en50221_io_read_condition.isra.7+0x6f/0x150
RSP: 0018:ffff88003d8fba98 EFLAGS: 00010206
RAX: 0000000059534255 RBX: 000000753d470f90 RCX: ffff88003c74d181
RDX: 00000001bea04ba9 RSI: ffff88003d8fbaf4 RDI: 3a3030a56d763fc0
RBP: ffff88003d8fbae0 R08: ffff88003c74d180 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffff88003c480e00
R13: 00000000ffffffff R14: 0000000059534255 R15: 0000000000000000
FS: 00007fb4209b4700(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f06445f4078 CR3: 000000003c55b000 CR4: 00000000000006b0
Stack:
ffff88003d8fbaf4 000000003c2170c0 0000000000004000 0000000000000000
ffff88003c480e00 ffff88003d8fbc80 ffff88003c74d180 ffff88003d8fbb8c
0000000000000000 ffff88003d8fbb10 ffffffff812f3e37 ffff88003d8fbb00
Call Trace:
[<ffffffff812f3e37>] dvb_ca_en50221_io_poll+0x37/0xa0
[<ffffffff8113109b>] do_sys_poll+0x2db/0x520
This is a backtrace of the kernel attempting to lock a freed mutex:
#0 0xffffffff81083d40 in rep_nop () at ./arch/x86/include/asm/processor.h:569
#1 cpu_relax () at ./arch/x86/include/asm/processor.h:574
#2 virt_spin_lock (lock=<optimized out>) at ./arch/x86/include/asm/qspinlock.h:57
#3 native_queued_spin_lock_slowpath (lock=0xffff88003c480e90, val=761492029) at kernel/locking/qspinlock.c:304
#4 0xffffffff810d1a06 in pv_queued_spin_lock_slowpath (val=<optimized out>, lock=<optimized out>) at ./arch/x86/include/asm/paravirt.h:669
#5 queued_spin_lock_slowpath (val=<optimized out>, lock=<optimized out>) at ./arch/x86/include/asm/qspinlock.h:28
#6 queued_spin_lock (lock=<optimized out>) at include/asm-generic/qspinlock.h:107
#7 __mutex_lock_common (use_ww_ctx=<optimized out>, ww_ctx=<optimized out>, ip=<optimized out>, nest_lock=<optimized out>, subclass=<optimized out>,
state=<optimized out>, lock=<optimized out>) at kernel/locking/mutex.c:526
#8 mutex_lock_interruptible_nested (lock=0xffff88003c480e88, subclass=<optimized out>) at kernel/locking/mutex.c:647
#9 0xffffffff812f49fe in dvb_ca_en50221_io_do_ioctl (file=<optimized out>, cmd=761492029, parg=0x1 <irq_stack_union+1>)
at drivers/media/dvb-core/dvb_ca_en50221.c:1210
#10 0xffffffff812ee660 in dvb_usercopy (file=<optimized out>, cmd=761492029, arg=<optimized out>, func=<optimized out>) at drivers/media/dvb-core/dvbdev.c:883
#11 0xffffffff812f3410 in dvb_ca_en50221_io_ioctl (file=<optimized out>, cmd=<optimized out>, arg=<optimized out>) at drivers/media/dvb-core/dvb_ca_en50221.c:1284
#12 0xffffffff8112eddd in vfs_ioctl (arg=<optimized out>, cmd=<optimized out>, filp=<optimized out>) at fs/ioctl.c:43
#13 do_vfs_ioctl (filp=0xffff88003c480e90, fd=<optimized out>, cmd=<optimized out>, arg=<optimized out>) at fs/ioctl.c:674
#14 0xffffffff8112f30c in SYSC_ioctl (arg=<optimized out>, cmd=<optimized out>, fd=<optimized out>) at fs/ioctl.c:689
#15 SyS_ioctl (fd=6, cmd=2148298626, arg=140734533693696) at fs/ioctl.c:680
#16 0xffffffff8103feb2 in entry_SYSCALL_64 () at arch/x86/entry/entry_64.S:207
Signed-off-by: Max Kellermann <max@duempel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The wait_event() call in dvb_unregister_frontend() waits synchronously
for other tasks to free a file descriptor, but it does that while
holding several mutexes. That alone is a bad idea, but if one user
process happens to keep a (defunct) file descriptor open indefinitely,
the kernel will correctly detect a hung task:
INFO: task kworker/0:1:314 blocked for more than 30 seconds.
Not tainted 4.7.0-rc1-hosting+ #50
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/0:1 D ffff88003daf7a50 0 314 2 0x00000000
Workqueue: usb_hub_wq hub_event
ffff88003daf7a50 0000000000000296 ffff88003daf7a30 ffff88003fc13f98
ffff88003dadce00 ffff88003daf8000 ffff88003e3fc010 ffff88003d48d4f8
ffff88003e3b5030 ffff88003e3f8898 ffff88003daf7a68 ffffffff810cf860
Call Trace:
[<ffffffff810cf860>] schedule+0x30/0x80
[<ffffffff812f88d3>] dvb_unregister_frontend+0x93/0xc0
[<ffffffff8107a000>] ? __wake_up_common+0x80/0x80
[<ffffffff813019c7>] dvb_usb_adapter_frontend_exit+0x37/0x70
[<ffffffff81300614>] dvb_usb_exit+0x34/0xb0
[<ffffffff81300d4a>] dvb_usb_device_exit+0x3a/0x50
[<ffffffff81302dc2>] pctv452e_usb_disconnect+0x52/0x60
[<ffffffff81295a07>] usb_unbind_interface+0x67/0x1e0
[<ffffffff810609f3>] ? __blocking_notifier_call_chain+0x53/0x70
[<ffffffff8127ba67>] __device_release_driver+0x77/0x110
[<ffffffff8127c2d3>] device_release_driver+0x23/0x30
[<ffffffff8127ab5d>] bus_remove_device+0x10d/0x150
[<ffffffff8127879b>] device_del+0x13b/0x260
[<ffffffff81299dea>] ? usb_remove_ep_devs+0x1a/0x30
[<ffffffff8129468e>] usb_disable_device+0x9e/0x1e0
[<ffffffff8128bb09>] usb_disconnect+0x89/0x260
[<ffffffff8128db8d>] hub_event+0x30d/0xfc0
[<ffffffff81059475>] process_one_work+0x1c5/0x4a0
[<ffffffff8105940c>] ? process_one_work+0x15c/0x4a0
[<ffffffff81059799>] worker_thread+0x49/0x480
[<ffffffff81059750>] ? process_one_work+0x4a0/0x4a0
[<ffffffff81059750>] ? process_one_work+0x4a0/0x4a0
[<ffffffff8105f65e>] kthread+0xee/0x110
[<ffffffff810400bf>] ret_from_fork+0x1f/0x40
[<ffffffff8105f570>] ? __kthread_unpark+0x70/0x70
5 locks held by kworker/0:1/314:
#0: ("usb_hub_wq"){......}, at: [<ffffffff8105940c>] process_one_work+0x15c/0x4a0
#1: ((&hub->events)){......}, at: [<ffffffff8105940c>] process_one_work+0x15c/0x4a0
#2: (&dev->mutex){......}, at: [<ffffffff8128d8cb>] hub_event+0x4b/0xfc0
#3: (&dev->mutex){......}, at: [<ffffffff8128bad2>] usb_disconnect+0x52/0x260
#4: (&dev->mutex){......}, at: [<ffffffff8127c2cb>] device_release_driver+0x1b/0x30
This patch removes the blocking wait, and postpones the kfree() call
until all file handles have been closed by using struct kref.
Signed-off-by: Max Kellermann <max@duempel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The LIRC_CAN_REC() returns a boolean "flag & LIRC_CAN_REC_MASK"
to check whether the device can receive data.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
When opening or closing a lirc character device, the framework
provides to the user the possibility to keep track of opening or
closing of the device by calling two functions:
- set_use_inc() when opening the device
- set_use_dec() when closing the device
if those are not set by the lirc user, the system segfaults.
Check the pointer value before calling the above functions.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
If ioctl is called, it cannot be a case of invalid system call
number (ENOSYS), that is a ENOTTY case which means that the
device doesn't support that specific ioctl command.
So, replace ENOSYS with ENOTTY.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
When comparing a variable with a constant, the comparison should
start from the variable and not from the constant. It's also
written in the human DNA.
Swap the terms of comparisons whenever the constant comes first
and fix the following checkpatch warning:
WARNING: Comparisons should place the constant on the right side of the test
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The three if statements check the same thing, merge them in only
one statement.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are two if ... else which check the same thing in different
part of the code, they can be merged in a single check.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The whole function is inside an 'if' statement
("if (ir->d.add_to_buf)").
Check the opposite of that statement at the beginning and exit,
this way we can have one level less of indentation.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
... use "do .. while" instead.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The code can be rearranged so that some goto paths can be removed
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This patch mutes also all the checkpatch warnings related to
printk.
Reword all the printouts so that the string doesn't need to be
split, which fixes the following checkpatch warning:
WARNING: quoted string split across lines
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Transmitters don't necessarily need to have a FIFO managed buffer
for their transfers.
When registering the driver, before allocating the buffer, check
whether the device is a transmitter or receiver. Allocate the
buffer only for receivers.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
During the driver registration, move the buffer allocation on a
separate function.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
Linus Torvalds
Mauro Carvalho Chehab
David S. Miller
Hans Verkuil
Geert Uytterhoeven
Abylay Ospan
James Patrick-Evans
Colin Ian King
Hans Verkuil
Tiffany Lin
Arnd Bergmann
Sean Young
Stefan Pöschel
Heiner Kallweit
Max Kellermann
Andi Shyti