aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-09-30V4L/DVB (6052): ivtv: fix udma yuv bugIan Armstrong1-2/+4
Using udma yuv causes the driver becomes locked into that mode. This prevents use of the mpeg decoder & non-udma yuv output. This patch clears the operating mode when the device is closed. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-26usbvision-video: buggered method tablesAl Viro1-3/+2
duplicated .mmap in one, .vidioc_s_audio misspelled as .vidioc_g_audio in other Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19pci: fix unterminated pci_device_id listsKees Cook1-0/+1
Fix a couple drivers that do not correctly terminate their pci_device_id lists. This results in garbage being spewed into modules.pcimap when the module happens to not have 28 NULL bytes following the table, and/or the last PCI ID is actually truncated from the table when calculating the modules.alias PCI aliases, cause those unfortunate device IDs to not auto-load. Signed-off-by: Kees Cook <kees@ubuntu.com> Acked-by: Corey Minyard <minyard@acm.org> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-14V4L/DVB (6188): Avoid a NULL pointer dereference during mpeg_open()Steven Toth1-1/+1
Bug: With a hardware encoder board installed as cx88[1] and a non-encoder boards installed as cx88[0], an OOPS is generated during cx8802_get_device() called from mpeg_open(). Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-14V4L/DVB (6148): Fix a warning at saa7191_probeMauro Carvalho Chehab1-2/+2
saa7191.c: In function 'saa7191_probe': saa7191.c:596: warning: passing argument 3 of 'saa7191_write_block' discards qualifiers from pointer target type Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-14V4L/DVB (6147): Pwc: Fix a broken debug messageJean Delvare1-1/+1
Commit 85237f202d46d55c1bffe0c5b1aa3ddc0f1dce4d introduced the following warning (with CONFIG_USB_PWC_DEBUG=y): drivers/media/video/pwc/pwc-if.c: In function "pwc_video_close": drivers/media/video/pwc/pwc-if.c:1211: warning: "i" may be used uninitialized in this function This is true, and can cause a broken debug message to be logged. Here's a fix. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-14V4L/DVB (6144): Fix mux setup for composite sound on AverTV 307Stas Sergeev1-6/+6
Right now the composite sound input doesn't work on AverTV 307 because of the wrong mux setup. The composite sound is routed via an external 4channel multiplexer controlled by GPIO, while the code assumes an internal multiplexer instead. Presumably this was a copy/paste error, and noone have ever tested the functionality. With the attached patch it works properly, which gives me an ability to finally watch the cable TV under linux. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-14V4L/DVB (6095): ivtv: fix VIDIOC_G_ENC_INDEX flag handlingHans Verkuil2-7/+16
Due to a documentation bug (the type mask is 3 bits long, not 2) the wrong frame types were filled in: the B and P frame types were swapped. This bug also hid a second bug: when a capture is stopped a last entry is written into the pgm index buffer with internal type 0, denoting the end of the program. This entry wasn't ignored, instead it was accidentally returned to the caller as a P frame. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-23Merge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds2-2/+10
* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (6070): Fix a warning at dvb_net V4L/DVB (6042): b2c2-flexcop: fix Airstar HD5000 tuning regression
2007-08-23V4L/DVB (6070): Fix a warning at dvb_netMauro Carvalho Chehab1-2/+3
static function dvb_net_sec declares input arg "pkt" as u8. However, the same argument at dvb_net_sec_callback is defined as "const u8". When calling dvb_net_sec, this is casted as just "u8". gcc 4.2.1 generates a warning about that: CC [M] drivers/media/dvb/dvb-core/dvb_net.o drivers/media/dvb/dvb-core/dvb_net.c: In function "dvb_net_sec_callback": drivers/media/dvb/dvb-core/dvb_net.c:905: warning: passing argument 2 of "dvb_net_sec" discards qualifiers from pointer target type Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-23V4L/DVB (6042): b2c2-flexcop: fix Airstar HD5000 tuning regressionTrent Piepho1-0/+7
Git changeset 6bdcc6e6dbab8daffd05e5026486f34ba41a6c72 dropped the stand-alone lgh06xf module, whose functionality was absorbed into the dvb-pll module. However, there was a minor difference between the code in lgh06xf and dvb-pll, which caused a regression in b2c2-flexcop devices using the LG-H06xF NIM. dvb-pll will probe for the presence of an i2c pll chip by performing a single byte read, the lgh06xf driver did not do this. Unfortunately, the code in flexcop-i2c.c does not currently support 1 byte or 0 byte reads as a probe. Such probes with the current code will always fail. In order to work around this problem, and restore proper functionality of the Airstar HD5000 device, this hack was created to make the probe appear to succeed. The single byte read in dvb_pll_attach is the only place where such a probe would ever occur, so this change is safe, and will not affect any other devices. Of course, if one knew how to actually perform the read operation, it would be better to go that route. In the meantime, however, we must apply this workaround, in order to prevent the regression that causes tuning to fail on the Airstar HD5000 ATSC device. Thanks to Jarod Wilson, who had originally reported this regression, and to Geoffrey Hausheer, whose original workaround patch led us to find the actual cause of the problem. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Cc: Geoffrey Hausheer <inli3epy93n@phracturedblue.com> Acked-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-22USB: fix DoS in pwc USB video driverOliver Neukum2-17/+36
the pwc driver has a disconnect method that waits for user space to close the device. This opens up an opportunity for a DoS attack, blocking the USB subsystem and making khubd's task busy wait in kernel space. This patch shifts freeing resources to close if an opened device is disconnected. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22USB: Fix a memory leak in em28xx_usb_probe()Jesper Juhl1-0/+1
If, in em28xx_usb_probe() the memory allocation dev->alt_max_pkt_size = kmalloc(32* dev->num_alt,GFP_KERNEL); fails, then we'll bail out and return -ENOMEM. The problem is that in that case we don't free the storage allocated to 'dev', thus causing a memory leak. This patch fixes the leak by freeing 'dev' before we return -ENOMEM. This fixes Coverity bug #647. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-20V4L/DVB (6028): Turn an unnecessary mdelay() into msleep().Marcelo Tosatti1-1/+1
Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (6027): Get rid of an ill-behaved msleep in i2c writeJonathan Corbet2-2/+25
Configuring the OLPC camera requires something over 150 register writes. Unfortunately, querying the CAFE i2c controller too soon after a write causes the hardware to flake. The problem had been "solved" with an msleep() call, but, between the number of registers and how msleep() behaves, that resulted in a 3-second delay on camera initialization. Instead, we hand-code a wait for the completion interrupt which avoids reading the status registers. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (6026): Avoid powering up the camera on resumeChris Ball1-1/+10
Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (5991): dvb-pll: Set minimum and maximum frequency properlyTrent Piepho1-1/+1
The tuner maximum frequency wasn't being set, while the minimum frequency was set to what the maximum should have been. If a future patch were to enforce these limits, dvb-pll would be effectively broken. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (5969): ivtv: report ivtv version in status logHans Verkuil1-1/+1
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (5967): ivtv: fix VIDIOC_S_FBUF:new OSD values where never setHans Verkuil1-0/+1
ivtv: fix VIDIOC_S_FBUF support: new OSD values where never actually set. The values set with VIDIOC_S_FBUF were not actually used until the next VIDIOC_S_FMT. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5939): dvb-pll: make struct dvb_pll_fcv1236d staticAdrian Bunk1-1/+1
The fcv1236d support patch was created before the "dvb: remove static dependencies on dvb-pll" patch was applied, but the fcv1236d patch didn't get merged until after the fact. struct dvb_pll_fcv1236d can become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5933): Dvb-usb/af9005-fe.c: error check fixesAdrian Bunk1-6/+4
This patch: - adds a missing error check and - removes an error check that could never be true Both spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luca Olivetti <luca@ventoso.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5932): Af9005 fix tuner module unloadLuca Olivetti1-25/+12
This patch removes the useless tuner field and avoids a double free of the tuner (either mt2060 or qt1010). Signed-off-by: Luca Olivetti <luca@ventoso.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5920): ivtv: fix incorrect fw size report.Hans Verkuil1-1/+1
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5918): ivtv: fix TV-out VBI handling, only reset on last close.Hans Verkuil2-10/+10
While decoding (MPEG or YUV) is active or when VBI output is in use, then do not clear the VBI output of the saa7127. Only after the last user is gone can we clear it. This fixes the case where playback was stopped, another channel was chosen and playback was restarted, while /dev/vbi16 was used to set the WSS (widescreen) setting. Without this fix the WSS was reset on every stop instead of just keeping the last value. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5917): ivtv: improve mailbox responsiveness.Hans Verkuil1-3/+11
First try polling for the result of a mailbox command, then switch to a test/sleep loop. Also reduce the sleep time from 10 ms to 1 ms. Improves the responsiveness of the mailbox handling. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5916): ivtv: fix pause/continue/play handlingHans Verkuil3-2/+11
Pausing a decoder followed by a Play command would do nothing. Fixed. Pausing a decoder running at non-standard speed following by a Continue would reset the speed to 100%. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5900): usbvision: fix bugs [sg]_register functionsTrent Piepho1-2/+3
s_register was assigning the return code to (unsigned)reg->val, rather than errCode, which it what it would return. Except reg->val can't be < 0, so it would never actually return an error. g_register never actually put the value it read into reg->val. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 supportTrent Piepho1-104/+134
Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5891): zr36067: Turn off raw capture properlyTrent Piepho2-6/+26
When raw capture was turned off, the current capturing frame (v4l_grab_frame) wasn't reset to NO_GRAB_ACTIVE. If capture was turned back on, the driver would think this frame was currently being captured, and wait for it to complete before starting a new frame. The hardware on the other hand would not be actively capturing a frame. The result was the driver would wait forever for v4l_grab_frame to be captured. Some calls to zr36057_set_memgrab(0) were missing spin-locks, which have been added. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5890): zr36067: Add UYVY, RGB555X, RGB565X, and RGB32 formatsTrent Piepho3-97/+86
Add support for the UYVY and the other big endian output formats. The driver was naming formats based on the host endianess. This is different that all the other drivers appear to work and not what software appears to expect. Use ARRAY_SIZE() to find the the size of the zoran_formats array. Change the way the driver handles setting the video format register. Rather than use some if and switch statements to set to register by looking at the format id, the format list simply has a field with the proper bits to set. Adds a bit of ifdef to make a driver without V4L1 support more possible. Also create a macro for defining formats that handles vl41 and/or vl42 support to avoid repeated ifdefs in the format list. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5888): zr36067: Driver was not returning correct image sizeTrent Piepho1-3/+5
The driver was returning the size of the (fixed) buffer it allocated as the sizeimage field in the v4l2 pixel format, rather than the actual size of the image. For example, a 192x128 YUYV image is 49152 bytes but the driver would always return 131072 bytes since if that was the size of the v4l buffer. This violates the v4l2 spec, which says that sizeimage should be the actual size of the image for uncompressed formats. It also caused mplayer to crash. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5887): zr36067: Fix poll() operationTrent Piepho1-26/+33
During uncompressed capture, the poll() function was looking the wrong frame. It was using the frame the driver was going to capture into next (pend_tail), when it should have been looking at the next frame to be de-queued with DQBUF/SYNC (sync_tail). It also wasn't looking in the right spot. It was looking at the file handle's copy of the buffer status, rather than the driver core copy. The interrupt routine marks frames as done in the driver core copy, the file handle copy isn't updated. So even if poll() looked at the right frame, it would never see it transition to done and return POLLIN. The compressed capture code has this same problem, looking in fh->jpg_buffers when it should have used zr->jpg_buffers. There was some logic to detect when there was no current capture in process nor any frames queued and try to return an error, which ends up being a bad idea. It's possible to call select() from one thread while no capture is in process, or no frames queued, and then start a capture or queue frames from another thread. The buffer state variables are protected by a spin lock, which the code wasn't acquiring. That is fixed too. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30V4L/DVB (5886): zr36067: Fix problem setting normsTrent Piepho1-3/+3
The zr36067 driver doesn't make a distinction between the different sub-types of NTSC, PAL, or SECAM norms. For example, when the enum std ioctl returns the PAL standard it returns PAL_BG|PAL_DK|PAL_H|PAL_I. When setting the norm, it required the bitmask to match exactly the set of norms used during the enumeration. If just one norm was specified, for example PAL_BG or NTSC_M, it would fail. This violates the V4L2 spec, "VIDIOC_S_STD accepts *one* or more flags..." The key thing to realize is that V4L2_STD_PAL is not one bit, it is multiple bits. It's ok to call S_STD with any *one* of those bits, but the driver was requiring *all* of them. This fixes the S_STD function so that it will accept any set of one or more PAL norms as PAL, and the same for NTSC and SECAM. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-26more VIRT_TO_BUS dependenciesAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20V4L/DVB (5880): wm8775/wm8739: Fix memory leak when unloading moduleHans Verkuil2-0/+4
State struct was never freed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5877): radio-gemtek-pci: remove unused structure memberTrent Piepho1-3/+0
The drivers reads the PCI subsystem ID into its state structure, but it's never used anywhere. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5871): Conexant 2388x: check for kthread_runCyrill Gorcunov1-1/+7
The patch adds checking of kthread_run return code and issues a message if it fails. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5869): Add check for valid control ID to v4l2_ctrl_next.Hans Verkuil1-5/+14
If v4l2_ctrl_next is called without the V4L2_CTRL_FLAG_NEXT_CTRL then it should check whether the passed control ID is valid and return 0 if it isn't. Otherwise a for-loop over the control IDs will never end. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5866): ivtv: fix DMA timeout when capturing VBI + another streamHans Verkuil1-2/+5
The VBI DMA is handled in a special way and is marked with a bit. However, that bit was set at the wrong time and could be cleared by mistake if a PCM (or other) DMA request would arrive before the VBI DMA was completed. So on completion of the VBI DMA the driver no longer knew that that DMA transfer was for VBI data. And this in turn caused havoc with the card's DMA engine. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5865): Remove usage of HZ on ivtv driver, replacing by msecs_to_jiffiesMauro Carvalho Chehab7-29/+32
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5861): Use msecs_to_jiffies instead of HZ on bttv, cx88 and saa7134Mauro Carvalho Chehab5-6/+6
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5860): Use msecs_to_jiffies instead of HZ on some webcam driversMauro Carvalho Chehab2-3/+3
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5859): use msecs_to_jiffies on InfraRed RC5 timeoutMauro Carvalho Chehab1-2/+2
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5858): Use msecs_to_jiffies instead of HZ on media/video I2C driversMauro Carvalho Chehab4-9/+9
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5857): Use msecs_to_jiffies instead of HZ on radio driversMauro Carvalho Chehab2-3/+3
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5855): ivtv: fix Kconfig typo and refer to the driver homepage.Hans Verkuil1-2/+2
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5854): ivtv: cleanup of driver messagesHans Verkuil5-32/+29
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5853): ivtv: add support to suppress high volume i2c debug messages.Hans Verkuil1-5/+5
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5852): ivtv: don't recompile needlesslyAlexey Dobriyan1-2/+1
Driver prints banner including kernel version. Was a leftover from when the driver was standalone. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-20V4L/DVB (5851): ivtv: fix missing I2C_ALGOBIT config optionHans Verkuil1-0/+1
I2C_ALGOBIT must also be selected when ivtv is selected. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>